Bit of a strange problem here windows clock keeps resetting time after every reboot it still stays in the same time zone just changes the clock.
Iv'e changed the CMOS battery and the BIOS time is correct.
It did this on Windows 8 and still doing it on windows 8.1.
Shortly after I pressed the Power button for the first time on my brand new Windows 8 laptop, I was brought to the screen where I set my time zone. I changed the default - Pacific Time - to my time zone - Eastern Time - and continued setting up my computer. Not long after, I realized that the time shown on my computer was wrong, and when I checked I discovered that the time zone had reverted to Pacific Time.
The problem is: I cannot change the time zone! (Yes, I am an Administrator.) Whether I do it from the Start Screen or the desktop, the time zone always reverts to Pacific Time. I even tried running tzutil from an elevated command prompt - the time zone will not change.
How can I change the time zone to Eastern Time? (I have plain Windows 8, not the Pro version.)
I recently upgraded to Windows 8. My laptop's time zone is set for EST but Windows 8's Calendar and Mail apps show PST. How can I change it?
View 1 Replies View RelatedInstalled Win 8 Pro with 'keep Win 7 settings' option, then noticed that it displayed GMT rather than UTC+10 for Canberra, Australia. Checked and updated 'Date and Time' to (UTC+10:00) Canberra, Melbourne, Sydney, made sure Location was 'Australia' and Language 'English (Australia)' and still the system time is 4am when it should be 4pm.
View 4 Replies View RelatedI work and live in two different time zones. I'd like to display my home time zone, but my system time must be set to the network time and gets reset if I change it. I used to use the clock gadget in Windows 7 but Windows 8 no longer has it. I'm looking for a solution that is not invasive and hopefully free. I'm a programmer so I know a good deal about Windows, but I can't figure this one out. I am aware of the tool-tip time; its not what I'm looking for. I want to be able to check my time on the computer screen at a glance.
View 8 Replies View RelatedI have done several Win 8, Win 8.1 Preview, and Win 8 RTM clean installs recently and I always seem to end up with a Pacific Time Zone by default. Now, that tells me I am either missing that option on a consistent basis or MS didn't include it.
View 4 Replies View RelatedThe time is not shown correctly in my task bar, this happened for second time, when it happened a month ago, I just changed the time.
When I re-booted it shows the correct time.
after using Windows 7 Ultimate on my laptop for almost 2 years I decided to upgrade to Windows 8. The first day it was working fine,no problems at all. The other day I disconnected my USB mouse and it would keep on playing the disconnect sound, however, I solved that issue. Recently since yesterday whenever I would start my laptop and login,the windows start up sound won't play. It plays once I connect any one usb device to the laptop, but it will play the default usb connected sound with the latter devices. I ticked the 'play windows sound on start up' at the sound properties.
View 1 Replies View RelatedI just got my hard drive back. I bought the computer in Sept. and the HD went. So it had to go to California. When I got the computer back the time was California time. I clicked on the time in the right hand corner and changed it to Eastern Standard time. It is still accurate in the right hand corner but people are saying my emails times are all wrong. They are receiving them before I've written them. And... to increase the mystery everyone's emails are coming to me with the wrong times. What could be wrong? Is it possible California time is still active somewhere else on the computer?
I'm using Outlook Mail. I went to my mail on roadrunner and the times are accurate so the problem is somewhere on my computer.
Everytime I off this computer in 5pm, and open it in 8am it's changing the Language like this picture.
what I do is Recover my Computer using 'Automatic System Restore' to get back.
Unlike Win7 and earlier, the Window's Update GUI doesn't show the time setting (or the field to set/reset it).. How do I change the Window's Update checking time. Mine currently checks at 6:34AM and my computer isn't even on until 9 or 10AM
It's NOT in the CONTROL PANEL | WIDOWS UPDATE | Settings panel.
I started to notice a change with the clock every now and then. I finally concluded that the clock does not change during sleep, restart, or shutdown.
My computer goes to sleep often, and when it wakes up from sleep, the time is the same as when it was prior to sleeping, not synchronizing to the correct time after waking up.
I've done some research and I fell onto the official Windows thread where they explained the use of third-party-utility will cause this problem.
The big problem here is that I don't have the single clue which ones. I tried uninstalling some, not sure if I left any utilities out. The utilities I've used are the general ones for visual styles and themes.
I'm running Windows 8.1.
I recently purchased alienware m18x r2 with following specs
I7 3630m
Gtx 680m sli
12gb ram
750gb wd
120 (windows installed)
& 256gb sdd
Now for the problem when I receive the laptop it was preinstalled with window 8 and on the first boot it took around 5 to 6 mins to boot to desktop..I reinstalled the windows considering it to be the bloatware fault..
The problem gets solved but after i download alienware osd drivers , alienware command center and nvidia drivers the delay is back ..
It starts with a bsod (your pc ran into problem)error window minidump memory.dmp.etc and after that windows boot restart and shutdown after almost 5 to 10 mins..
In the duration of delay there is no hdd activity and after 3 to 5 minutes when the hdd gets actives it boots to desktop in 5 secs..
I recently installed Windows 8 Pro on my Acer Aspire 5515 notebook. I set the time and date on the desktop clock, and every time I log in, the time and date are wrong and I have to reset them again. I have a dual boot setup with Windows 8 on one partition, and Ubuntu 12.10 on the other.
It doesn't appear to be an issue with the hardware of my computer, because the time and day stay set in Ubuntu. Some time ago, I was running a boot time diagnostic, and I got a warning the the was not timer connected to the apic...but that's all I could read before the message disappeared, I researched what I could and learned that this could and learned this had something to do with a physical component of my processor or related to my processor, but was unable to find out any more. As far as I know, this is the only hardware problem I have, and I thought this might be the cause of my erratic time/date.
I have some problems ....
1. My keyboard cant properly type in " without me inputting another input. so everytime i wanna type in " i need to click space just to make it appear. how do i make it normal?
2. My date and time keeps changing and it makes me lose track of time quite a lot. its already set to automatic internet time, but it keeps changing still. i keep changing it back, resyncing and stuff. How to make it stop?
Since I have installed windows 8.1, every time for example if I don't use my laptop for 10 minutes, and because of the battery saving setting plan, my display turns off. Before I installed windows 8.1, I could just move a mouse or press any key and display would turn on, but since the installation I have to restart my laptop (Samsung ultrabook), even if I can hear it's on and working.
View 4 Replies View RelatedThe Weather App is not Remembering Location. I have to set it to New York every time I restart my PC otherwise it always shows Washington DC weather .
I just have to launch it and then it automatically changes to my location.
My client has Windows 8 installed (with Windows 7 desktop, lolwut?), it's connected to the internet.
The clock changes every 10 minutes, despite being synchronised to internet time.
Here's some extra, straight forward information;
Machine - HP Pavilion G6
Time setting - London
Problem - Clock (System Time) keeps changing incorrectly after about 10 to 30 minutes.
Win 8 clock app that will run in a small size on top of other Win 8 apps?
It's one thing that I really miss having (you can only see the Taskbar clock when working on Desktop Apps)
I'm running Windows 8 and like that Microsoft decided to extend the task bar to my secondary monitor. However, I think they should take it one step further. Why can't we have the clock on both of the taskbars as well? Picture this scenario:
You got up at 7am and have class at 9:30am. With 2 and a half hours of free time, you decide to play Skyrim. However, because Skyrim runs full screen, you can't easily view the clock unless you either alt-tab out or (if you are running Steam) shift-tab to bring up the game overlay. You could also find a desktop gadget to stick on your other monitor, but why not simply duplicate the notification tray and system clock onto the other monitor.
I keep getting Clock Watchdog Timeout and it is pretty annoying because the only way to get rid of that pesky blue screen is to turn the power strip off and then my clock, printer, TV, lamp and everything goes off. Is there a problem with my CPU or drivers??
View 9 Replies View RelatedWhy the clock stops in taskbar.
View 4 Replies View RelatedI don't want to disable the Charms bar, just the clock.
View 4 Replies View RelatedI have an HP Laptop with windows 8.1. I would like the clock on the task bar to show the seconds, or else install one on the desktop as in the Vista sidebar.
View 4 Replies View RelatedWhen I am moving the cursor around that clock keeps flashing up I do I get rid of it?
View 3 Replies View RelatedI am tired of having a computer in my bedroom waking up sometimes multiple times in the morning hours--like approximately 3 or 4 A.M. Support people have tried to stop this operation but to no avail. It still is doing it although less frequently now. This morning at 3:14 A.M., it woke up automatically and then shut down a few minutes later.
In Event Viewer it said at 3:14 A.M.: The system time has changed to 2013-10-06T10:14:28.500000000Z from 2013-10-06T06:11:17.671868600Z. Change Reason: System time synchronized with the hardware clock. I attached a screen shot of the info in Event Viewer, for your reference.
Why does the computer have to do this at 3:14 A.M.? Can't this occur some other time like during the day when the computer is running?
((why give me space for a title that is bigger than the number of characters I am allowed to enter?))
I finally took the leap last week and installed a new HD and installed Windows 8 64bit on it. I've been using it and accessing my old apps on my vista drive as well. Today Windows encouraged me to upgrade to Win 8.1, which I did. Now, all the stuff I painstakingly pinned to my taskbar is gone. I have tried to repin it but it says it is already pinned. I have unpinned and repinned, but it still does not show up. In addition, the clock is missing.
I'd really like the use of that desktop/taskbar back.
I am using windows 8 and from time to time the whole laptop freezes with only short moments where you can move the mouse until it freezes again.
And today I was using word and the program wouldn't let me work in it, you could see the mouse movement at the bottom of the screen only. I had to shut it down using task manager for it to work again.
Any software to either enlarge the tray desktop clock display or replace it? I know I can hover the mouse on Settings to get the large panel display. But I'd rather just be able to read it. Of course I'm looking for freeware.
View 9 Replies View RelatedUp until a few days ago the icons for all jpeg, png and Gif files showed the images that were the pictures for each file. Now, for some reason, those icons have the same icon for each. They appear as a landscape of some sort. How to correct this. get the icons to show the contents of the individual files?
View 6 Replies View RelatedI haven't done a DOS copy command for quite some time. I'm wondering if I have forgotten something or is it different using Windows 8 which is my OS. Today I was trying to copy some files from the DOS prompt but got messages of either "wrong syntax", unable to "find file" or"could not find destination". Dose the command prompt work the same in Windows 8 as it always has or am I apparently doing something wrong?
View 9 Replies View Related
