I'm trying to install wi8 from a bootable usb device, i've this screen for more than 30 minutes now ..
it's NTFS formatted.. i set the BIOS as the following: 1st boot dev. USB-ZIP, 2nd USB-HDD, 3rd USB-CDROM i made it via Windows7-USB-DVD-tool
I'm running Windows 8.1 on an UEFI system, clean installed from my USB-key created with Rufus. But when I try to boot with this USB-key on my older PC (which does not have UEFI), then before installing Windows it says that there is no HDD or partition Windows can be installed in? I can then boot again with USB-key select rep. PC, start cmd, change the HDD to GPT, then Windows can be installed, but then it can't boot from the HDD!!
How do I make a bootable USBkey with Windows 7 or Windows 8 that can be installed on an ordinary MBR HDD? I need to make it on my system running GPT SSD.
I have tried this:
CMD (elevated)
diskpart
list disk
select disk (selected my USB)
clean
create partition primary
active
assign
exit
and then copied my windows 8 dvd onto it.
It will boot, but Windows will only install on a GPT HDD.
What to do?
I just bought a Laptop with Windows 8.1 it does not come with an install disk and the supplier flat-out refused to provide one, pointing me to the recovery partition saying that was all I needed.
The recovery program just reinstalls, losing data and does not have Windows trouble shooting options as found on the Windows 8 install disk. How do I create a Windows 8.1 install disk.
I have original ISO file from MSDN website - it is Windows 8.1 Update 1 Enterprise (x64) MSDN version with Slovak language interface. I create a bootable DVD (Verbatim DVD-R 4,7GB) in program ISO2Disc. This ISO I would like to install on to my system , more details about my pc - see my system specification. My motherboard is MSI Z77 Mpower with latest version UEFI - BIOS 17.12
I have a few question about installation a new windows 8.1 in uefi mode:
-what a bootable media is better ? I think USB stick or DVD disc
-what the function in the BIOS I must turn on or off, I mean the fast boot or memory fast boot
-UEFI mode is better then LEGACY mode ?
I have a bootable DVD Parted Magic , it is good Partition Manager. I must change MBR format to GPT - only GPT is supported format for UEFI , is it rue ? So , now i should format all disc inside my pc (secure erase for ssd disc and wipe for hhd). I can create NTFS partition with GPT format and aligned to 1204MB for all solid state discs and HDD. I can do this ?
Having used Windows 8 satisfactorially for a while now on a VM I'm trying to install it on a real PHYSICAL machine.
To save the hassle of burning DVD's I decided I would like to install from a USB drive however when trying to create a bootable USB stick using the usb tool from the tutorial it always fail with "Cannot copy the files".
I've tried on 3 different USB sticks from different manufacturers so it's almost outside the possibility that all 3 USB sticks are defective. I'm trying to run this on W7 X64.
Screenshot enc
Any links to an alternative tool that will do this ...
I've recently purchased a new laptop with a genuine windows 8, and then I upgraded to 8.1.
Is it possible to install with the same DVD using the same product key?
Ive just done a clean installation of Windows 8. I checked device manager straight away. There was a listing under Other Devices with an exclamation mark listed only as "Media". Ive never seen that before so I havent a clue what it referred to. When I clicked on its properties it said Internal High Definition Audi Bus. Was this a serious issue..maybe a corrupted installation?
I wasn't sure what to do but because I had installed from Windows CD and not factory image I had to go to the Dell site and then install the Intel Chipset software. I then rebooted. The Media icon and exclamation error then disappeared from Device Manager.
Was it the Reboot of my PC that got rid of it or was it the Intel Chipset software being installed that sorted it out? Also what is "Media" referring to or is it just a generic term? Also, Im always confused as to what is the difference between an exclamation mark and the blue question mark on a white background in Device Manager which Ive seen before too?
My employer is starting to look at Windows 8 for our tablet PCs. Currently we only have 1 model, its the Dell Latitude ST and are using Windows 7 on them. I am trying to create and customize an automated install of Windows 8 for our Latitude ST's.
I've used MDT to capture a Windows 8 Enterprise 32bit image and can image Latitude tablet from thumb drive just fine. In image I copied (not installed) driver files to my WIM file. My unattend.xml file works fine, am not getting any prompts once booting into image on my Latitude ST's.
The problem I am having is Windows Setup is not installing any Latitude device drivers. I copied the device drivers to C:WindowsINFLatitudeST folder and in it is a folder for each device (i.e. Network folder contains all driver files for NIC). I see in the registry that the device path is set to %systemroot%INF so I think I have correct location for parking the driver files. I'm assuming that Windows 8 will search all files/folders in C:WindowsINF for correct INF file. I even tried copying the actual network driver files to C:WindowsINF thinking the system should see it and then install drivers (incase it didn't search for sub folders). To make sure I have Windows 8 supported drives, I downloaded latest driver and still don't work. Everything I try I just cannot get device drivers to install during setup.
Once I am in OS, I can go to device manager, see devices that are unknown, then manually install drivers pointing to the C:WindowsINFLatitudeST folder. Manually works, automated don't.
On Windows 7 Pro 32bit OS, I don't have a problem. The Windows Setup will search C:WindowsINF and find all the correct device drivers for the Latitude ST tablet and install them during setup.
Why cannot I get drivers to install during setup?
I have a Dell Inspiron 7720. I have created an uefi bootable usn flash disk with rufus 1.4b
I'm trying to boot from it so i can create a Windows 8.1 uefi installation and the problem is that the usb flash disk wont boot.
I have secure boot enabled and legacy option rom disabled.
I can't browse well from my phone at work does this file exist anywhere? I have an 8 upgraded to 8.1 but caused all kinds of issues with registries and such. I want to reformat and clean install 8.1 SP1 if possible when I get home.
View 9 Replies View RelatedSo I'm trying to run dual OS on my new windows 8 machine. I made a bootable Ubuntu 14.04 usb stick using Rufus, disabled secure boot and proceeded in attempting to install the system. However, (settings->general->advanced startup->use a device) won't detect my bootable USB. It won't boot from it at startup either, no matter how much I fiddle with the UEFI settings.
Well, I guess that is not entirely true, as I managed to get it to boot and install ubuntu after switching the UEFI boot settings to legacy boot. But windows 8 does not work under that option, so I'm having to go and change the UEFI boot setting every time I wish to use a different OS.
I was just on my computer about an hour ago when it froze up and I had to restart it.
Upon restarting it everything was normal until I ended up getting a screen w/ a loading bar saying "2.2 TB Infinity: Press any key to enter boot menu". At first I just let it load - which brought me to a black screen saying "No bootable device found, press any key to reset". And of course, when I pressed the key the computer reset. Then it happened again - this time I tried pressing a key - nothing. The loading bar stopped (like it was trying to bring up the boot menu) but nonetheless it brought me back to the black screen once again telling me to press a key to reset. Over and over again this happens - I tried inserting my Windows 8 CD; nothing.
My computer is a Cyberpower PC
MSI Motherboard
Windows 8
XPS One 2710. I updated to Windows 8.1 via Windows store today. The installation went fine but it couldn't reboot because of "no bootable device". The setup/bios is set up on uefi mode/safetymode on. I've tried to disable safetymode or run in legacy but no luck. I have no bootable device and expected the installation to go just fine. Now what?
View 2 Replies View RelatedI tried the sys command which used to work under older operating systems.
View 9 Replies View RelatedIve used pirated bootables with preinstalled product keys in the past but am now on the straight and narrow, wanting to add my product key to my legitimate copy of windows 8. This way I wont have to worry about having it written down, losing it or entering it incorrectly, since it will be automatically entered for me. How I can add the product key to my bootable image?
View 3 Replies View RelatedI have an Acer M5-581T laptop with windows 8.1 (windows 8 was already installed when this laptop was bought) and has been running fine since i received it. Last night I accidentally dropped the the right hand side of my computer about 2 or 3 inches but no more. I didn't think anything of it until this morning when i tried to start up my computer and was successful until when i tried to open an application on my desktop and my computer froze. Also when i started up my computer i heard a scratching or cracking sound in the right hand side and this continued for the nect couple times i tried to restart my computer.
So, after it froze I restarted my computer just by holding the power button and upon turning it on again after the Acer start up screen i got the message "No bootable device. Hit any key." in a blue box. Hitting any key did nothing obviously. After some research i was able to press F2 and open up BIOS but with messing around with the settings and even changing in secure mode from UEFI and Legacy BIOS doesn't seem to work. Pressing control+alt+delete doesnt work, it only restarts my laptop. I haven't really done anything like try to change my laptop from windows 8 to windows 7 so it is still windows 8.1.
I read the tutorial on building a Windows EFI USB stick from the Windows ISO. I want to build an EFI/USB from an ISO of a bootable third party application, which is not designed to boot from UEFI. First, I went through the steps in Diskpart. Then, I copied the files from the third party ISO to the USB stick. Screenshot 34 shows the objects listed from the third party ISO. The second screenshot (35) shows what I have on my Win 8.1 ISO. I tried to just copy the efi folder and bootmgr files from the Win 8 ISO, but my Win 8 system (a VM) didn't like that at all. !
View 2 Replies View RelatedNot sure if it's Lenovos only, but trying to migrate Windows 8 OEM to an SSD has been a huge pain in the ass. This process should not be as difficult as Lenovo/Microsoft has made it.
I purchased a Y400 along with a 256G SSD. I'd like to clean install Windows onto the SSD, I did not want to copy image. I went through forums for hours trying to put a recovery system on a usb with no luck (even with the instructions given by a Lenovo moderator on their website), I kept getting "missing partition drive". I broke down and paid Lenovo the ridiculous "shipping charge" of $59 for the recovery disks.
These are my steps so far:
-My SSD is installed and I removed the HDD (until Windows 8 was installed, I'd then format it)
-Put Disk 1 into the optical drive (Disk 1 states it's the format sequence and starting point for restore, Windows 8 actually on disk 2, I believe)
-Pressed the "Novo" button on the left side of the machine (gives options of Normal Startup, BIOS Setup, Boot Manager and System Recovery)
*FYI - Boot Manager lists: Windows Boot Manager and 2 EFI volumes (when HDD is plugged in, just the EFI's when uninstalled)
System Recovery only works with the HDD installed and it's Lenovo's One Key Recovery which just restores to a restoration point.*
Went into BIOS setup
Tabbed over to "Security"
Disabled the "Secure Boot"
Tabbed over to "Boot"
Changed the Boot Mode to "Legacy Support"
Changed Boot Priority to "Legacy First"
Saved then exited.
Pressed the "Novo" button once more, went into BIOS setup
Tabbed back to "Boot"
Boot device priority was now displayed with SATA ODD, SSD and Network Boot.
I reordered to boot from SATA ODD
Saved and exited
Upon restart, I pressed F12 (select boot device), and chose the SATA ODD
It went into a DOS looking screen and gives "No Bootable Device - Insert boot disk and press a key"
I've also tried variations of the above procedures for a few hours with no luck.
I have not tried to boot from "Lenovo Recovery System" (which is only available with the HDD installed), I figured it would default to the HDD and not let me chose to install onto SSD.
I've recently replaced my secondary HDD in HP Pavillion dv7 (primary is SSD@W8.1) and as soon as I booted up computer, I got error "no bootable devices found". The first thing that I tried out was bootable USB with Windows 8.1 whereas I ran "automatic repair" several times, without any luck.
Then I opened up command prompt under advanced menu and ran:
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
None worked, probably because of "element not found" error. I also tried with diskpart where I manually selected (see screenshot) SSD system partition for active one, but still without any luck.
I also created bootable Minitool Parition Magic USB and ran Rebuild BCD from there and it still didn't work.
[URL] ....
I wanted to do a fresh windows 8.1 install (i have a samsung NP500P4C-T03CL notebook with windows 8 OEM preinstalled and when i updated to 8.1 the system went slow and "faily"). So i put the CD on the drive, but for my suprise when i reboted the system to enter the BIOS the F2 key didn't do the job, nor it appeared on the splash screen on samsung. After googling a lot and under trial/error concept i could enter the BIOS via Shift+Restart.
I did some changes to the BIOS booting set-up and noticed i have 2 Windows Boot Manager, the CD, the HDD and one option called "SETUP" that has a "!" ("!3.Setup"). So i tried every combination posible with Secure boot unabled, and UEFI+CSM OS, also with UEFI disabled, and none gave me the option to enter bios with F2, or recovery with F4. I managed to install win7 on another HDD. Main thing, besides the F2, F4, F8, F9, F12 (yes i prove all of them, even ESC), is that whenever i change the boot order it's not saved, and it is restablished to:
1. Windows Boot Manager
2. Windows Boot Manager
3. Setup
4. HDD
5. CD
Also i noticed that on the password options the one for the HDD appears grayed and as "FROZEN". I entered user and supervisor password, neither cleared the HDD one. i want to keep the BIOS update as a last resort. clearly it's not hdd related as the same thing happened when i tried another hdd with win7).
The system files in the hard drive got corrupted and the OS won't boot past the "starting windows" screen.
So I decided to reformat the PC, however, it seems that the motherboard does not support USB boot.
How do I do this? I have an option for network boot but as far as I know I need a server for that, I only have a laptop available.
Is it possible to force it to boot via USB drive or do some 'magic' on my laptop so it can boot from the LAN network?
I just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.
So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.
However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)
The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.
I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.
I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.
Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?
I have to galaxy s2 one of of the can't connect to the pc and the other one can. The one which dosn't connect a messege pops up ( the last device you connected to this computer malfunctioned and windows dosen't recognize it.
View 2 Replies View RelatedAny good program that will allow me to clone my system which is a PCI-E storage device (OCZ Revodrive 350) to a hard drive for backup purposes and of course boot from that hard drive if required to reverse the process?
View 9 Replies View RelatedI am trying to install the new develp build of Windows 8 (x86) on my asus eeepc 1005pe. This is a netbook which doesnt even have a cd/dvd drive.
So anyway, I extracted the iso on a bootable usb flash drive. I boot, and when I click install it just hangs for about 10 minutes and then it gives me this error:
I tried setting the bios from AHCI to IDE. This does not work, I even get a bluescreen of death when I boot up in the current win7 sp1 install. But anyway on google I read a lot about this problem and one of the solutions is to put it on AHCI.. but not for me as it was already on AHCI. Anyway IDE is not workin either.
Just recently I installed win7sp1 on this netbook without a problem. I checked the sha1 hashes of the Windows 8 ISO and they are confirmed, so that is not the problem either.
I am having a problem with a new Dell Inspiron 15 3520 that came with Windows 8 installed and that I had been using for only a month when it went bad.
The problems started when I turned it off about ten days ago, and went I turned it back on a couple days later, and it was stuck in the apparently famous Windows 8 "Automatic repair couldn't repair your pc"/BSOD loop. I was not able to boot into safe mode. System restores made no difference. Somewhere along the line I found something that said that I had an "inaccessible_boot_device error".
From the repair menu maze, I was able to get to a command prompt. I used this to copy almost all of my files off of computer.
Chkdsk showed no bad sectors, no bad partition records, or other irregularities. sfc returned "Windows Resource Protection did not find any integrity violations". Some test (I do not remember which) showed that the boot record and BCD were fine. The Dell hardware diagnostic test showed everything working fine.
I am thinking that it is possible that the source of this was a virus or mechanical problem (I saw no evidence for either). If I had to guess, however, I would imagine that the computer stopped working after an automatic update pushed a corrupted/incompatible driver. I have seen discussions online about people having problems with NVIDIA video and/or SATA AHCI Controller drivers, and Windows 8 getting corrupted and stuck in the BSOD loop from that. At some point I saw a Windows Update Log (I am not sure where), that showed that, as Windows shut down the last time it was functional, automatic updates installed a new AHCI driver.
I tried downloading some new drivers for the 3520 from the Dell web site and installing them on the dead computer through a thumb drive and the command prompt. The downloads are all executables, however, and when I tried to run them, I get the message, "the subsystem needed to support the image type is not present". I believe that this message means that the driver executables are 32bit apps and won't run from a 64 bit command prompt. I also tried to use the "Drivers and Utilities" disk that came with my PC to do some driver rollbacks, but, I can't understand the file names or folder structure on the disk, and, when I try some to run some of the exe files ("setup.exe", for example) to get a gui interface, I get the "the subsystem needed to support the image type is not present" message.
After working on the problem for a while, I borrowed a friend's Windows 8 installation disk set. The computer will boot to the repair options off of the 64bit disk, but not the 32bit one. I did attempt a System Refresh off of the 64bit disk, and got back the message, "The drive where Windows in installed is locked. Unlock the drive and try again."
Around the time that I was messing with the BIOS settings to get the computer to boot off of the Windows 8 disk, I started getting a message "Your PC needs to be repaired - Boot Configuration Data file is missing some required information -- File:BCD -- error code 0xc0000034" at the start of my boot ups. I am not sure if I deleted a file somewhere during my repair efforts, or if I am getting this message because the computer is confused in efforts trying to boot off of the DVD. I get this message even with the DVD removed and the BIOS set to boot off of the Windows Boot Manager, however, so I am guessing that a file is now missing. And the message stops me from getting into the repair menus/command prompt any other way except through the installation disk.
I have a desktop PC Acer XC600, the hard disk is formatted in the UEFI-Scheme. Now I want to do a clean install of a fresh Windows 8, but I cannot manage to boot into UEFI-mode, neither from DVD or USB.
I can reach a boot menu by pressing F12, but there is nothing like shown in the article about installing Windows 8 in UEFI mode. Only standard bios devices show up. There are simply no UEFI devices. I tried different usb sticks, dvds, formatted them different ways, but the best I can get is the point where setup says "cannot install because the disk is formatted GPT".
But the acutal system is definitely running in UEFI mode (?)
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
I'm installed Windows 8 on my desktop. The Windows 8 Upgrade Assistant indicates that this software will install OK. It was NOT flagged as a problem.
However, when I went to install it, there were warnings that it wasn't supported and when I try it, I get errors about the registry.
How to use VB.NET, I don't understand it, and I'm used to VB 6.0. Is there a way to use VB 6 in Windows 8?
My laptop originally had Windows 8 installed on it on an SSD and an HDD. I have since wiped the drive clean. But now, I need to get Windows 8 back for work. How can I replicate the original layout with Windows 8 being put on both a SSD and a HDD. The nature of my work involves a lot of CAD software usage for projects as well as research and the like. As such, I would like for such software to be located on my SSD for faster speeds.
View 9 Replies View Related
