Setup Installation :: How To Install In UEFI Mode With Bootable DVD
Sep 15, 2014
I have original ISO file from MSDN website - it is Windows 8.1 Update 1 Enterprise (x64) MSDN version with Slovak language interface. I create a bootable DVD (Verbatim DVD-R 4,7GB) in program ISO2Disc. This ISO I would like to install on to my system , more details about my pc - see my system specification. My motherboard is MSI Z77 Mpower with latest version UEFI - BIOS 17.12
I have a few question about installation a new windows 8.1 in uefi mode:
-what a bootable media is better ? I think USB stick or DVD disc
-what the function in the BIOS I must turn on or off, I mean the fast boot or memory fast boot
-UEFI mode is better then LEGACY mode ?
I have a bootable DVD Parted Magic , it is good Partition Manager. I must change MBR format to GPT - only GPT is supported format for UEFI , is it rue ? So , now i should format all disc inside my pc (secure erase for ssd disc and wipe for hhd). I can create NTFS partition with GPT format and aligned to 1204MB for all solid state discs and HDD. I can do this ?
So I've searched, and I've tested, and now I'm about to turn my laptop into a frisbee and never buy a Samsung PC again. In short, I bought an ATIV 7 whose previous owner had downgraded to Win7. I wanted to put Win 8 on and I have a volume license as well as the OEM key so I burned the ISO (actually 2 different ones) using every method I could find (ImgBurn, Rufus, Iso2Disc, Win7 Download tool, etc.) It became clear that the USB needed to be formatted FAT32 with GPT filesystem, however in UEFI mode it shows the USB but won't allow me to select it - it just flashes. If I set it back to CSM and UEFI I can make a USB boot, but even if I use diskpart to clean the drive and convert to GPT it will fail to install because it detects I didn't boot in UEFI mode.
Here's the deal. When I'd installed it earlier this week in CSM and MBR mode, and then converted to UEFI it worked fine. So....I tested several recovery programs we use at work to make sure they'd restore it okay via bootable media. Paragon, Aomei, Macrium, Lazesoft - all boot media failed. ONLY True Image 2014 DOES ACTUALLY BOOT in UEFI mode on my laptop. The only thing I can figure is that the way WinPE 5 or 5.1 (whatever it uses) is set up on it agrees with my laptop. So how I can modify the Acronis recovery media or create similar WinPE media that might actually boot on my laptop.
I'm running Windows 8.1 on an UEFI system, clean installed from my USB-key created with Rufus. But when I try to boot with this USB-key on my older PC (which does not have UEFI), then before installing Windows it says that there is no HDD or partition Windows can be installed in? I can then boot again with USB-key select rep. PC, start cmd, change the HDD to GPT, then Windows can be installed, but then it can't boot from the HDD!!
How do I make a bootable USBkey with Windows 7 or Windows 8 that can be installed on an ordinary MBR HDD? I need to make it on my system running GPT SSD.
I have tried this:
CMD (elevated) diskpart list disk select disk (selected my USB) clean create partition primary active assign exit
and then copied my windows 8 dvd onto it.
It will boot, but Windows will only install on a GPT HDD.
I just bought a Laptop with Windows 8.1 it does not come with an install disk and the supplier flat-out refused to provide one, pointing me to the recovery partition saying that was all I needed.
The recovery program just reinstalls, losing data and does not have Windows trouble shooting options as found on the Windows 8 install disk. How do I create a Windows 8.1 install disk.
Having used Windows 8 satisfactorially for a while now on a VM I'm trying to install it on a real PHYSICAL machine. To save the hassle of burning DVD's I decided I would like to install from a USB drive however when trying to create a bootable USB stick using the usb tool from the tutorial it always fail with "Cannot copy the files".
I've tried on 3 different USB sticks from different manufacturers so it's almost outside the possibility that all 3 USB sticks are defective. I'm trying to run this on W7 X64.
Screenshot enc
Any links to an alternative tool that will do this ...
I need to change some setting in my UEFI/BIOS but it is stuck in ready only mode. All options are blanked out except for "exit". How can I get it to let me edit the settings again?
using the UEFI install instructions from this forum. I do meet all of the requirements (Windows 8 64-bit iso, ASRock Z87 Extreme4 mobo, blank SSD). When I get to Step 7 in the UEFI guide, I only get 2 partitions instead of the 4 shown(Recovery, System, MSR, Primary). I only get System and Primary. I decided to delete all partitions and just run the setup on the unallocated drive...everything worked fine. I am just wondering what the consequences are of not having those 4 partitions. I still have the UEFI interface when I boot up so it appear that is working.
I have a Lenovo B575 laptop that is not UEFI capable; however, I have downloaded the x64 Win 8.1 ISO, burned it to a bootable DVD and a bootable USB drive and tried installing Windows 8.1 using a boot from DVD and also a boot from USB drive, and neither method has resulted in a successful installation. The root cause of the installation problem is that Windows 8.1 is intent on creating an EFI partition structure on my non-UEFI machine.
So, I end up with a 300MB Recovery Partition and a 100MB EFI Partition which doesn't work well on my machine. Now, during the installation process, I opted to delete all existing partitions and allow the installation to properly partition the hard drive for installation; however, I knew I was in trouble when the machine started hanging during reboots.
I have made a clean install of Windows 8 using USB and UEFI. Somehow it seems the instalaltion is not quit right of what I have read... Have attached picture of the Diskmanagement (OS is Norwegian by the way).
Compared to this thread: UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with for me something is missing/wrong.
I have a laptop with one SSD and two internal disks. Both internal disk were removed before the installation, and connected and formatted after finished the installation.
It can me mentioned that I downloaded the OS, saved it as .iso file, then copied onto the USB disk. Then connected into the laptop and booted from USB/UEFI.
I did not follow these steps: UEFI Bootable USB Flash Drive - Create in Windows
I have just recently bought a new computer. If I knew I was going to have this issue I probably wouldn't have bought a 4TB HDD but anyway.
What I have done is read the article (this is where I found out I couldn't install to the 4TB HDD in the first place) on how to install Windows in UEFI format. I have created a USB flash to do this but still my HDD partion is only showing up at 1.6TB. It is setup as a GPT file format as it gave me all the prompts and created the Recovery, system partitions etc. How do I get this to work so when I do the install it shows up in the first place as the 4TB partition or at the end of it all is still not possible?
What I will be doing is installing Windows on this 4TB patition and then using a 256GB SSD in SSD Caching.
Am I better off getting a 1-2TB drive and installing normally instead of wasting my time or can this be done?
I recently bought a new SSHD for my laptop and after initial problems with trying to install Windows in UEFI, I turned to Legacy and that worked. But now when I change it to UEFI, it just comes up as "Operating system not found".
After reading many threads about this UEFI stuff, i'm confused. I have a Asus Sabertooth z77 motherboard and will be fresh installing windows 8.1 full to Samsung 250gb ssd. I'm not quite getting what i'm supposed to configure on the MB for UEFI boot prior to installing the windows 8.1.
it's getting boot and install only in EFI mode. after trying to reinstall it won't allow me to select the disk partition, as it gave me the error "
Windows 8 cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks." i tried all the given solutions on GOogle. even i cannot recover or refresh using windows 8 environment. many times it gives me BSOD. cannot vonvert to MBR as it says it cannot be done on virtual HDD.
tried many things nothing works, need to install windows 8 after every 1 or 2weeks, many a times my BCD data gets corrupt, and windows wont start. Also tried many things to repair this, but only thing that works is reinstalling windows 8. That gpt or MBR error was solved by selecting UEFI:CD drive. in boot options by pressing F12 after inserting the disk.
My system configuration: System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 8 Pro, 64 bit Processor: Intel(R) Pentium(R) CPU G645 @ 2.90GHz, Intel64 Family 6 Model 42 Stepping 7 Processor Count: 2 RAM: 3029 Mb Graphics Card: Intel(R) HD Graphics, -1813 Mb Hard Drives: C: Total - 102399 MB, Free - 33011 MB; D: Total - 374009 MB, Free - 51233 MB; Motherboard: Gigabyte Technology Co., Ltd., H61M-DS2 Antivirus: Windows Defender, Disabled
On my computer there is a pre-installed Windows 8 which works fine for UEFI boot (Secure boot not necessary).
Now when I switch in UEFI setup at boot time the UEFI mode into the CSM (BIOS) mode and restart then Windows 8 is not starting any more.
As far as I find out an UEFI-based Windows 8 can only boot with UEFI mode enabled.
So my question is: Can I turn an existing UEFI based Windows 8 installation into an CSM/BIOS based installation (=a Win8 which boots successfully even when I enable CSM in UEFI setup) ?
I can't browse well from my phone at work does this file exist anywhere? I have an 8 upgraded to 8.1 but caused all kinds of issues with registries and such. I want to reformat and clean install 8.1 SP1 if possible when I get home.
Ive used pirated bootables with preinstalled product keys in the past but am now on the straight and narrow, wanting to add my product key to my legitimate copy of windows 8. This way I wont have to worry about having it written down, losing it or entering it incorrectly, since it will be automatically entered for me. How I can add the product key to my bootable image?
I read the tutorial on building a Windows EFI USB stick from the Windows ISO. I want to build an EFI/USB from an ISO of a bootable third party application, which is not designed to boot from UEFI. First, I went through the steps in Diskpart. Then, I copied the files from the third party ISO to the USB stick. Screenshot 34 shows the objects listed from the third party ISO. The second screenshot (35) shows what I have on my Win 8.1 ISO. I tried to just copy the efi folder and bootmgr files from the Win 8 ISO, but my Win 8 system (a VM) didn't like that at all. !
Not sure if it's Lenovos only, but trying to migrate Windows 8 OEM to an SSD has been a huge pain in the ass. This process should not be as difficult as Lenovo/Microsoft has made it.
I purchased a Y400 along with a 256G SSD. I'd like to clean install Windows onto the SSD, I did not want to copy image. I went through forums for hours trying to put a recovery system on a usb with no luck (even with the instructions given by a Lenovo moderator on their website), I kept getting "missing partition drive". I broke down and paid Lenovo the ridiculous "shipping charge" of $59 for the recovery disks.
These are my steps so far:
-My SSD is installed and I removed the HDD (until Windows 8 was installed, I'd then format it) -Put Disk 1 into the optical drive (Disk 1 states it's the format sequence and starting point for restore, Windows 8 actually on disk 2, I believe) -Pressed the "Novo" button on the left side of the machine (gives options of Normal Startup, BIOS Setup, Boot Manager and System Recovery)
*FYI - Boot Manager lists: Windows Boot Manager and 2 EFI volumes (when HDD is plugged in, just the EFI's when uninstalled) System Recovery only works with the HDD installed and it's Lenovo's One Key Recovery which just restores to a restoration point.*
Went into BIOS setup Tabbed over to "Security" Disabled the "Secure Boot" Tabbed over to "Boot" Changed the Boot Mode to "Legacy Support" Changed Boot Priority to "Legacy First" Saved then exited.
Pressed the "Novo" button once more, went into BIOS setup Tabbed back to "Boot" Boot device priority was now displayed with SATA ODD, SSD and Network Boot. I reordered to boot from SATA ODD Saved and exited
Upon restart, I pressed F12 (select boot device), and chose the SATA ODD It went into a DOS looking screen and gives "No Bootable Device - Insert boot disk and press a key" I've also tried variations of the above procedures for a few hours with no luck.
I have not tried to boot from "Lenovo Recovery System" (which is only available with the HDD installed), I figured it would default to the HDD and not let me chose to install onto SSD.
So I'm trying to run dual OS on my new windows 8 machine. I made a bootable Ubuntu 14.04 usb stick using Rufus, disabled secure boot and proceeded in attempting to install the system. However, (settings->general->advanced startup->use a device) won't detect my bootable USB. It won't boot from it at startup either, no matter how much I fiddle with the UEFI settings.
Well, I guess that is not entirely true, as I managed to get it to boot and install ubuntu after switching the UEFI boot settings to legacy boot. But windows 8 does not work under that option, so I'm having to go and change the UEFI boot setting every time I wish to use a different OS.
How I might create a bootable USB for our ASUS T100? Since it has no CD drive, it obviously came with windows installed, so I have no product key or ISO (whatever that is). I have also had much difficulty trying to get it to boot in safe mode...
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection Others say: <F8> No uefi setup option in boot selection I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
Is it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
Just a quick question about UEFI installation. I've got the Windows 8 Pro DVD but I lack USB Flash Drive 4Gb, is it possible to install Windows 8 with UEFI support with the DVD support or as written in the tutorial the USB Flash Drive is mandatory?
I have an ASUS Zenbook UX32V, which came with win 8 preinstalled.
I was having endless problems with Windows 8, such as software compatibility, and formatted the laptop (removing all partitions), and installing Windows 7 over it.
This has worked fine to date, but I now need to switch to Win 8 again.
I know my laptop supports UEFI, and that the Windows 8 installations are no longer probably on the computer. Is there a way to recover the cd key from the UEFI and use this to download the Win 8 installation files again? The CD key was not supplied in the laptop documentation...
Is it possible to install Windows 8.1 as Legacy with MBR? Or only as UEFI with GPT? I'm kind of confused with all this UEFI business, I always used MBR in my Windows installations. Also, Truecrypt does not support UEFI, so if installing Windows 8.1 I should do it as legacy.
Also, how can I control during the install process if I want to set my system installation as UEFI or Legacy?
I've made a UEFI Win8PE by WADK , then burn it to a CD. I boot normal and I can see X:WindowsSystem32.
I use EasyBCD to [Add New Entry] to append new boot item to existing Windows 8. The boot menu becomes like this :
Windows 8 Win8PE
But the Win8PE fail to boot with error message like insert Windows disc again ...... in the primary black and white screen.
Should I not to use EasyBCD to [Add New Entry] ? As I do the same thing in BIOs + MBR harddisk that booted perfect. In UEFI + GPT partition , do I better not to use EasyBCD , instead to use BCDEDIT , if so , what's the command line to do this with bcdedit ?
