Setup Installation :: Samsung Won't Boot Install USB In UEFI Mode?
Apr 2, 2014
So I've searched, and I've tested, and now I'm about to turn my laptop into a frisbee and never buy a Samsung PC again. In short, I bought an ATIV 7 whose previous owner had downgraded to Win7. I wanted to put Win 8 on and I have a volume license as well as the OEM key so I burned the ISO (actually 2 different ones) using every method I could find (ImgBurn, Rufus, Iso2Disc, Win7 Download tool, etc.) It became clear that the USB needed to be formatted FAT32 with GPT filesystem, however in UEFI mode it shows the USB but won't allow me to select it - it just flashes. If I set it back to CSM and UEFI I can make a USB boot, but even if I use diskpart to clean the drive and convert to GPT it will fail to install because it detects I didn't boot in UEFI mode.
Here's the deal. When I'd installed it earlier this week in CSM and MBR mode, and then converted to UEFI it worked fine. So....I tested several recovery programs we use at work to make sure they'd restore it okay via bootable media. Paragon, Aomei, Macrium, Lazesoft - all boot media failed. ONLY True Image 2014 DOES ACTUALLY BOOT in UEFI mode on my laptop. The only thing I can figure is that the way WinPE 5 or 5.1 (whatever it uses) is set up on it agrees with my laptop. So how I can modify the Acronis recovery media or create similar WinPE media that might actually boot on my laptop.
View 3 Replies
ADVERTISEMENT
Sep 15, 2014
I have original ISO file from MSDN website - it is Windows 8.1 Update 1 Enterprise (x64) MSDN version with Slovak language interface. I create a bootable DVD (Verbatim DVD-R 4,7GB) in program ISO2Disc. This ISO I would like to install on to my system , more details about my pc - see my system specification. My motherboard is MSI Z77 Mpower with latest version UEFI - BIOS 17.12
I have a few question about installation a new windows 8.1 in uefi mode:
-what a bootable media is better ? I think USB stick or DVD disc
-what the function in the BIOS I must turn on or off, I mean the fast boot or memory fast boot
-UEFI mode is better then LEGACY mode ?
I have a bootable DVD Parted Magic , it is good Partition Manager. I must change MBR format to GPT - only GPT is supported format for UEFI , is it rue ? So , now i should format all disc inside my pc (secure erase for ssd disc and wipe for hhd). I can create NTFS partition with GPT format and aligned to 1204MB for all solid state discs and HDD. I can do this ?
View 3 Replies
View Related
Jul 11, 2014
I recently bought a new SSHD for my laptop and after initial problems with trying to install Windows in UEFI, I turned to Legacy and that worked. But now when I change it to UEFI, it just comes up as "Operating system not found".
View 1 Replies
View Related
Sep 15, 2014
I need to change some setting in my UEFI/BIOS but it is stuck in ready only mode. All options are blanked out except for "exit". How can I get it to let me edit the settings again?
View 9 Replies
View Related
Jan 16, 2014
So I downloaded the ISO and burned it via unetbootin. I go into bios and change the following settings: disable fast boot, and make the OS selection CMS make USB boot first Then when i boot, it just boots back to windows 8. I also noticed that once I reboot back into bios, the USB is not set to first boot as I set it initially.
By the way I have a Samsung Series 7 Chronos with nividia graphics.
View 2 Replies
View Related
Aug 21, 2013
First, some context: I have a Dell Inspiron 15R SE that came with Windows 8.
I've managed to get a working dual-boot system with Ubuntu 12.10. I can't remember exactly how I done that, but I remember that I had to disable secure boot. I think that the boot configuration those days was:
Secure boot: DisabledLoad legacy option rom: EnabledBoot list option: Legacy
This "configuration" worked perfectly for 6-7 months.
Then, one day (last week, can't remember the exact day), when I was using Windows 8 the computer crashed. I hard-rebooted and got this screen:
After executed boot-repair from a Ubuntu LiveCD dozens of times I've decided to eliminate Ubuntu temporarily and focus to get a system with Windows 8 working nice.
Then I used my recovery DVDs to recover the system. Yup, Windows has booted. But when I restarted first time I got the same error. Then I, digging a solution, pressed F12 after a reboot and got here:
The highlighted option allows me to boot into Windows 8. So I went to boot options (F2) and changed the following configuration:
Load legacy option rom: DisabledBoot list option: UEFI
Now I can boot directly to Windows without need to press F12.
But my objective isn't complete. I want to erase all Ubuntu entries from the seconds image and restore the legacy boot from the first imagem (because they worked before).
I did two things:
I erased all partitions related to Ubuntu (root partition and home partition).I created a Windows recovery disk (not a system recovery disk).
I used the recovery disk to run the automatic recovery procedure (I forgot the exactly name). I've runned it at least 10 times with no success. Then I went to command prompt to try the famous triad: bootrec /fixmbr, bootrec /fixboot and bootrec /rebuildbcd. Still, no solution.
View 2 Replies
View Related
Mar 24, 2014
After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.
I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.
I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.
View 4 Replies
View Related
Jan 26, 2014
I replaced a Kingston 128GB SSD with a Samsung EVO 250GB SSD. Cloned Kingston SSD to new Samsung SSD using Acronis True Image.
Now, when I boot, it sits there for 30 seconds flashing the hard drive light blinking then proceeds to boot normally. All BIOS settings are default.
Hardware details in Specs.
Booting from the 128GB SSD was fine, no obvious delays.
What might be causing this? Could the new SSD be defective?
View 9 Replies
View Related
Dec 30, 2012
I have just replaced my broken HP DV5 laptop (windows7) with a new Samsung NP350V5C-A08 with window 8 already installed. I am having major problems working out how to change the boot order.
On my HP the boot order was:
a) Optical disc drive.
b) Usb external hard drive.
c) Internal hard drive.
This configuration allowed firstly to upload Ubuntu 12.10 from a disc in the optical drive onto the external drive, this allowed me to run Ubuntu from an external hard drive, this saved me from having to partition the internal hard drive and I believe invalidating the guarantee.
With my new Samsung I cannot get to list the boot options in the bios (the only option is the internal Hitachi drive). How I can run Ubuntu like I did with my HP laptop.
View 9 Replies
View Related
Jan 26, 2013
For some reason when I go into BIOS or press F10 on boot up to look at the boot options menu my Hitachi internal drive appears twice. This as only just happened after upgrading the BIOS, my machine is operating normally. How or do I need to remove one of the options.
View 1 Replies
View Related
Jan 14, 2014
using the UEFI install instructions from this forum. I do meet all of the requirements (Windows 8 64-bit iso, ASRock Z87 Extreme4 mobo, blank SSD). When I get to Step 7 in the UEFI guide, I only get 2 partitions instead of the 4 shown(Recovery, System, MSR, Primary). I only get System and Primary. I decided to delete all partitions and just run the setup on the unallocated drive...everything worked fine. I am just wondering what the consequences are of not having those 4 partitions. I still have the UEFI interface when I boot up so it appear that is working.
View 3 Replies
View Related
Jan 6, 2013
Here: [URL] .....
Somewhere in that link it says:
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection
Others say: <F8> No uefi setup option in boot selection
I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
View 3 Replies
View Related
Jun 30, 2013
I have a Lenovo B575 laptop that is not UEFI capable; however, I have downloaded the x64 Win 8.1 ISO, burned it to a bootable DVD and a bootable USB drive and tried installing Windows 8.1 using a boot from DVD and also a boot from USB drive, and neither method has resulted in a successful installation. The root cause of the installation problem is that Windows 8.1 is intent on creating an EFI partition structure on my non-UEFI machine.
So, I end up with a 300MB Recovery Partition and a 100MB EFI Partition which doesn't work well on my machine. Now, during the installation process, I opted to delete all existing partitions and allow the installation to properly partition the hard drive for installation; however, I knew I was in trouble when the machine started hanging during reboots.
View 9 Replies
View Related
Feb 12, 2013
I have made a clean install of Windows 8 using USB and UEFI. Somehow it seems the instalaltion is not quit right of what I have read... Have attached picture of the Diskmanagement (OS is Norwegian by the way).
Compared to this thread: UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with for me something is missing/wrong.
I have a laptop with one SSD and two internal disks. Both internal disk were removed before the installation, and connected and formatted after finished the installation.
It can me mentioned that I downloaded the OS, saved it as .iso file, then copied onto the USB disk. Then connected into the laptop and booted from USB/UEFI.
I did not follow these steps: UEFI Bootable USB Flash Drive - Create in Windows
View 9 Replies
View Related
Jul 27, 2013
I have just recently bought a new computer. If I knew I was going to have this issue I probably wouldn't have bought a 4TB HDD but anyway.
What I have done is read the article (this is where I found out I couldn't install to the 4TB HDD in the first place) on how to install Windows in UEFI format. I have created a USB flash to do this but still my HDD partion is only showing up at 1.6TB. It is setup as a GPT file format as it gave me all the prompts and created the Recovery, system partitions etc. How do I get this to work so when I do the install it shows up in the first place as the 4TB partition or at the end of it all is still not possible?
What I will be doing is installing Windows on this 4TB patition and then using a 256GB SSD in SSD Caching.
Am I better off getting a 1-2TB drive and installing normally instead of wasting my time or can this be done?
View 2 Replies
View Related
Feb 17, 2013
Windows 8 clean install crashes on first screen
Side note - I succeeded on installing Windows 8 on that particular laptop using UEFI, but NOT legacy. No matter what I tried it failed.
View 7 Replies
View Related
Sep 19, 2013
I've made a UEFI Win8PE by WADK , then burn it to a CD. I boot normal and I can see X:WindowsSystem32.
I use EasyBCD to [Add New Entry] to append new boot item to existing Windows 8. The boot menu becomes like this :
Windows 8
Win8PE
But the Win8PE fail to boot with error message like insert Windows disc again ...... in the primary black and white screen.
Should I not to use EasyBCD to [Add New Entry] ? As I do the same thing in BIOs + MBR harddisk that booted perfect. In UEFI + GPT partition , do I better not to use EasyBCD , instead to use BCDEDIT , if so , what's the command line to do this with bcdedit ?
View 9 Replies
View Related
Jun 6, 2013
My notebook has a Win 8 OEM key in UEFI. After wiping my hard disc I want to install Win 8 retail instead of OEM version.
Because this is not possible with stored OEM Win 8 key I want to boot with a Win 7 BootCD and patch the UEFI with a Win 8 retail serial key.
For that I need a Program like SLIC which accomplish this task.
But where do I get this SLIC tool?
is there another way to enter a new Win 8 key into UEFI from Win 7?
View 7 Replies
View Related
Mar 13, 2013
Laptop: ASUS UX31A-DB71, latest BIOS: 218
Originally my laptop came with Windows 7 and when i looked at disk management my disks were formatted with UEFI schema. One of my friend gave me a UEFI bootable USB drive loaded with Windows 8. So, i thought why not give it a try. So, I created a backup of my OEM Windows 7 and saved the iso files in a seperate external HD (created twice just to be sure . Now, i decided to load the Windows 8. Booted into the BIOS and there is an option to select the USB drive along with the UEFI option for that USB drive. I selected the UEFI option but some reason it does not boot into UEFI.
So I decided to select the standard USB install and this option let me install windows 8. In the process of installing i formatted the partitions and made a single partition and installed Windows 8 on it. I am guessing now the drive is not GPT but MBR. I also noticed that his installation USB disk had an option to select either 32bit or 64bit of Windows 8... Would Microsoft create a same iso file with both versions? I am guessing he created the USB from a illegitimate source.
I am planning on purchasing Windows 8 Pro version as an iso but wanted to be confident that it would work with UEFI architecture.
Questions:
1. Why would the system NOT boot from UEFI?
2. If I download the legitimate iso from Microsoft and wanted to install Window8 Pro via UEFI, I am sure i would have to format my SSD to GPT and how would i go about formatting it during installation?
3. How would i create a recoverable USB for my iso image i created for Windows 7 via ASUS AI Recovery. Do I need to follow the same procedure as stated in creating bootable USB disk (i.e. FAT32 system) via diskpart utility?
View 9 Replies
View Related
Nov 17, 2013
I just install windows 8 using BIOS , but now i want to change it to UEFI boot. so i followed steps below
1.create and format a new FAT32 partition K:
2.my windows8 is in I: so , i use this command bcdboot i:windows /f all /s k: and succeeded.
3.i checked with the bootice about the BCD in my K: and found it indeed point to i:windows just like the picture below [URL]
4. and i restart, choose uefi boot in BIOS configuration and it showed like this: [URL]
5. i checked my k:/windows/system32/ , there is a winload.efi file... [URL]
The most strange thing is that i've copyed my winload.efi to other computer which is already in UEFI mode , and also i've copyed it in my virtual machine, it works fine! So my winload.efi should be OK.
View 5 Replies
View Related
Jul 6, 2013
I've downloaded a legal iso from MAPS, i ve slisptremed all latest updates into it with Windows download integrator (it uses dism afaik) , then the problems comes in - i cannot use USB as my install.wim is 4,8 GB. I ve burned a Dual layer DVD with Windows 8 stock recorder and the PC doesnt see the DVD drive as bootable. When using stock it boots uefi from pendrive without any problems. How to make this updated iso boot into UEFI mode ?
View 9 Replies
View Related
Aug 11, 2014
After reading many threads about this UEFI stuff, i'm confused. I have a Asus Sabertooth z77 motherboard and will be fresh installing windows 8.1 full to Samsung 250gb ssd. I'm not quite getting what i'm supposed to configure on the MB for UEFI boot prior to installing the windows 8.1.
View 2 Replies
View Related
Jun 27, 2014
1st partition is Win7 SysPrep and the 2nd partition is Windows 8.1 Sysprep. I install Win7 and press Ctrl-Shift-F3 to form SysPrep, same as Windows 8.1 in 2nd partition. I made this becuase I've 25 Dell new Windows 8.1 Computer which are UEFI. I want to clone it to the other 24 Dell computers.
CASE 1 : 2 different partitions with 2 different Windows :
---------------------------------------------------------------
If I install both Windows like above, when Sysprep Generalize Win7, it works fine. But if I SysPrep Generalize Windows 8.1, it's fine also, but never can boot again back to Win7. The start boot option is like this :
Windows 7
Windows 8.1
If I choose to boot Windows 8.1, it's fine. If I choose to boot Windows 7, it ever boot to Windows 8.1. It means nomatter I choose to boot which Windows, it all goes to Windows 8.1 ?
CASE 2 : 1 partition for Win7 + Win81.VHD :
---------------------------------------------------------------
I install Win7 (C and press Ctrl-Shift-F3 to form SysPrep.
I create a Win81.VHD in Drive D: , imagex Windows 8.1 install.wim in it. Also press Ctrl-Shift-F3 to form SysPrep.
Sysprep Generalize Win7 is OK , SysPrep Generalize Windows 8.1 is also OK. But after that I can only boot to Windows 7 fine, when choose to boot Windows 8.1 , it always restart and back to the boot menu ?
View 1 Replies
View Related
Jul 21, 2013
I have a desktop PC Acer XC600, the hard disk is formatted in the UEFI-Scheme. Now I want to do a clean install of a fresh Windows 8, but I cannot manage to boot into UEFI-mode, neither from DVD or USB.
I can reach a boot menu by pressing F12, but there is nothing like shown in the article about installing Windows 8 in UEFI mode. Only standard bios devices show up. There are simply no UEFI devices. I tried different usb sticks, dvds, formatted them different ways, but the best I can get is the point where setup says "cannot install because the disk is formatted GPT".
But the acutal system is definitely running in UEFI mode (?)
View 7 Replies
View Related
Jul 24, 2014
Yesterday, after many, many problems with my computer, I finally decided to reinstall Windows 8.1 Pro onto my ASUS X200CA netbook. However, after backing up and reinstalling the OS, I found that when I tried to disable "Launch CSM" in my BIOS, all of my boot options would disappear and my laptop would continually boot into my BIOS. When I re-enabled "Launch CSM", the boot options would reappear - however, it had not included the "Option #1 - Windows Boot Manager" that I had seen in my other installation.
View 2 Replies
View Related
Jun 2, 2014
I cannot install windows 8 in BIOS or UEFI mode.
it's getting boot and install only in EFI mode. after trying to reinstall it won't allow me to select the disk partition, as it gave me the error "
Windows 8 cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks." i tried all the given solutions on GOogle. even i cannot recover or refresh using windows 8 environment. many times it gives me BSOD. cannot vonvert to MBR as it says it cannot be done on virtual HDD.
tried many things nothing works, need to install windows 8 after every 1 or 2weeks, many a times my BCD data gets corrupt, and windows wont start. Also tried many things to repair this, but only thing that works is reinstalling windows 8.
That gpt or MBR error was solved by selecting UEFI:CD drive. in boot options by pressing F12 after inserting the disk.
My system configuration:
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8 Pro, 64 bit
Processor: Intel(R) Pentium(R) CPU G645 @ 2.90GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 2
RAM: 3029 Mb
Graphics Card: Intel(R) HD Graphics, -1813 Mb
Hard Drives: C: Total - 102399 MB, Free - 33011 MB; D: Total - 374009 MB, Free - 51233 MB;
Motherboard: Gigabyte Technology Co., Ltd., H61M-DS2
Antivirus: Windows Defender, Disabled
View 1 Replies
View Related
May 7, 2013
I was finally able to install windows 8 in uefi mode using a usb and was wondering how i could install ubuntu 13.04 to dual boot with windows 8 uefi? basically i dont want to disable secure boot nor any other feature in bios. If can go into youtube and search for "Dual-Boot Windows 8 and Ubuntu 12.10 by AvoidErrors" and tell me if that video is the way to install it.
View 6 Replies
View Related
Mar 24, 2014
I have a Lenovo G580 laptop 2gb RAM, i5, and 500gb HDD. It had windows 8 RTM 32 bit installed on its C drive. It had come with DOS preinstalled so I had to do a fresh install of windows 8 via bootable usb. It worked well for few months but now it refuses to boot and goes into "automatic recovery mode" and then it says that your pc needs to be repaired with a recovery disc.
I did not made any recovery disc when it was working so I tried to do a fresh install of win 8 and then win 7 via bootable usb, but both have failed. The screen freezes after blue logo of windows appears and then it restarts saying it has encountered an error and needs to be restarted.
I have tried booting it in safe mode along with all other options on start-up menu but it doesn't work.
View 1 Replies
View Related
Dec 20, 2013
I built a new PC running 8.1, GPT, UEFI secure boot mode, everything. I'm now at the point where I'm ready to start migrating my data to it, but before I do that, I need to get some backup software that offers me the option to boot from a recovery CD and restore from an image file backup stored elsewhere. Until I've wiped this install & restored successfully, I don't consider it a usable machine. I already have this setup working on my Win7, but for some reason that software is not working with 8.1.
So I'm looking around for something new, and I'm on a trial of Paragon Backup and Recovery Home 12. It says I can create a WinPE disk (and I must use this, since I'm using Intel firmware-based RAID) that will allow me to do a bare-metal restore. The takes me to a link on their website for something called the "Paragon Boot Media Builder." And there's documentation on it, but I can't find out how to download it. If I Google downloading that, a bunch of pirate websites show up & not much else.
View 3 Replies
View Related
May 31, 2013
On my computer there is a pre-installed Windows 8 which works fine for UEFI boot (Secure boot not necessary).
Now when I switch in UEFI setup at boot time the UEFI mode into the CSM (BIOS) mode and restart then Windows 8 is not starting any more.
As far as I find out an UEFI-based Windows 8 can only boot with UEFI mode enabled.
So my question is: Can I turn an existing UEFI based Windows 8 installation into an CSM/BIOS based installation (=a Win8 which boots successfully even when I enable CSM in UEFI setup) ?
If yes: How do I do that?
View 1 Replies
View Related
Jul 28, 2014
I have a sony vaio vpcyb3v1e. I have windows 8.1 installed and i tried using a bootable usb to install as multi boot, the xp black edition on a separate partition. After doing that i couldn't be able to login in the windows 8.1 OS. I got the message Load needed DLLS for kernel.
View 9 Replies
View Related
