Setup Installation :: Boot Order On Samsung 350V5C-A08
Dec 30, 2012
I have just replaced my broken HP DV5 laptop (windows7) with a new Samsung NP350V5C-A08 with window 8 already installed. I am having major problems working out how to change the boot order.
On my HP the boot order was:
a) Optical disc drive.
b) Usb external hard drive.
c) Internal hard drive.
This configuration allowed firstly to upload Ubuntu 12.10 from a disc in the optical drive onto the external drive, this allowed me to run Ubuntu from an external hard drive, this saved me from having to partition the internal hard drive and I believe invalidating the guarantee.
With my new Samsung I cannot get to list the boot options in the bios (the only option is the internal Hitachi drive). How I can run Ubuntu like I did with my HP laptop.
View 9 Replies
ADVERTISEMENT
Jan 26, 2013
For some reason when I go into BIOS or press F10 on boot up to look at the boot options menu my Hitachi internal drive appears twice. This as only just happened after upgrading the BIOS, my machine is operating normally. How or do I need to remove one of the options.
View 1 Replies
View Related
Jan 26, 2014
I replaced a Kingston 128GB SSD with a Samsung EVO 250GB SSD. Cloned Kingston SSD to new Samsung SSD using Acronis True Image.
Now, when I boot, it sits there for 30 seconds flashing the hard drive light blinking then proceeds to boot normally. All BIOS settings are default.
Hardware details in Specs.
Booting from the 128GB SSD was fine, no obvious delays.
What might be causing this? Could the new SSD be defective?
View 9 Replies
View Related
Apr 2, 2014
So I've searched, and I've tested, and now I'm about to turn my laptop into a frisbee and never buy a Samsung PC again. In short, I bought an ATIV 7 whose previous owner had downgraded to Win7. I wanted to put Win 8 on and I have a volume license as well as the OEM key so I burned the ISO (actually 2 different ones) using every method I could find (ImgBurn, Rufus, Iso2Disc, Win7 Download tool, etc.) It became clear that the USB needed to be formatted FAT32 with GPT filesystem, however in UEFI mode it shows the USB but won't allow me to select it - it just flashes. If I set it back to CSM and UEFI I can make a USB boot, but even if I use diskpart to clean the drive and convert to GPT it will fail to install because it detects I didn't boot in UEFI mode.
Here's the deal. When I'd installed it earlier this week in CSM and MBR mode, and then converted to UEFI it worked fine. So....I tested several recovery programs we use at work to make sure they'd restore it okay via bootable media. Paragon, Aomei, Macrium, Lazesoft - all boot media failed. ONLY True Image 2014 DOES ACTUALLY BOOT in UEFI mode on my laptop. The only thing I can figure is that the way WinPE 5 or 5.1 (whatever it uses) is set up on it agrees with my laptop. So how I can modify the Acronis recovery media or create similar WinPE media that might actually boot on my laptop.
View 3 Replies
View Related
Apr 7, 2014
So I ordered two 1 TB Samsung 840 Evo SSD and am waiting for delivery in 10 days.
Currently, I have a 256 GB LiteOn SSD + 1 TB Seagate 5400 RPM HDD
The way I have them currently setup
C: (256 GB SSD) over provisioned by 30% here I have the OS installed, programs, and 2 games
D : (1 TB HDD): has my dropbox folder, docs, pics, music, videos, download folder
So what would you recommend now? keeping my SSD partitioned into 1 750 GB (after over provisioning) seems a bit too much right?
I really am confused on what is best, to split the first SSD into C and D and put my dropbox and other folders on it and leave the 2nd SSD empty to prolong its life? or put everything on the 2nd SSD?
also, I should OP both SSDs by 30% right?
I am gonna enable RAPID on the first one since I have 32 GB of RAM
View 8 Replies
View Related
Jan 16, 2014
So I downloaded the ISO and burned it via unetbootin. I go into bios and change the following settings: disable fast boot, and make the OS selection CMS make USB boot first Then when i boot, it just boots back to windows 8. I also noticed that once I reboot back into bios, the USB is not set to first boot as I set it initially.
By the way I have a Samsung Series 7 Chronos with nividia graphics.
View 2 Replies
View Related
Oct 29, 2013
I purchased a Samsung ATIV One 7 27" Windows 8 All-In-One Computer (DP700A7D-X01US) | Samsung PCs from best buy.it was a demo on the shelf I did a copy with paragon to a ssd. it runs great but it seems to missing something's about it. how can I do a factory reset. If I do a recovery will it just put back like it is now.
View 7 Replies
View Related
Sep 13, 2013
I have two laptops, both Samsung, one mine and one my sisters. My one is Windows 8 and her one is a slightly older model so Windows 7. Now both are are very similar in spec, being 4GB and Intel Pentium 2.3GHz models. She recently asked me if i could sort out her laptop with Windows 8, so I said yep should be no problem.
I went and bought a Windows 8 Pro 64bit and was at first going to just do a plain install. But then had a bright idea and thought why not do an image of mine and recover it to hers, and then when started up just enter the key of the new one. that way she gets a full original Samsung install along with all the apps and everything.
At first I tried the samsung built in Recovery software but had no luck as it was just a complete nightmare. Not booting the USB I put it on for the first few times, then eventually after changing the BIOS setting to UEFI and formatting her Disk to GPT it started but then said no image found. In end I tried the old way by using the Windows built in File Recovery Image tool which made me a repair disc and 3 discs for the image itself.
This booted first go and went all way through the recovery, and then did the usual "restarting in X seconds ..." But after it rebooted to my horror the Samsung Logo screen appears and then after that it just stays blank.
It does every few seconds momentarily flicker on the screen but then just goes bank again. I cant even get into the BIOS anymore or boot from anything.
View 8 Replies
View Related
Mar 28, 2014
So I had this recovery error that said my winload.efi was missing so I ran the recovery from boot up and decided to recover. I read that this will delete the files from C: so I turned on the "Maintain User Data" option and selected all including the local disk c from advanced selection. But when the process was finished, my laptop was empty and no data was restored. What happened ? did I just misunderstand how it works and now it's gone ? or is it just somewhere I can't find ?
View 2 Replies
View Related
Jul 17, 2013
I reset my pc to factory conditions using the Samsung recover tool, the pc seems slower fps wise in games for example. Was faster before i reset the pc. Model Samsung 3505VC. I believe it might be to do with my graphics card as it is rated only 4.9 now on windows rating and was 5.7 before.
View 2 Replies
View Related
Feb 22, 2014
My Dell Inspiron 660 is 2 months old. It came with Windows 8 preinstalled. My problem: I am trying to change the boot order so I can boot from CD ROM as a first option. I have tried using the "F" keys on boot, but it just ignores me and goes on to boot up. I have also tried the "Advanced Options > UEFI Firmware Settings" in "Change PC Settings" and got the same results. I spent some time on the phone with a Dell tech. After trying all the things I had already tried, he and his supervisor decided I must have a bad Motherboard. Does this sound right? Is there any way to repair this problem?
View 9 Replies
View Related
Apr 27, 2014
.I have an HP Pavilion Slimline PC desktop. It does not allow me to boot from CD/DVD drive or USB connection. Windows 8.1. I wish to be able to use the boot options cd/dvd and all the USB options. I can't use any of the options. I list bios setup options and suggestions given to me from articles but I'm not sure I'm afraid of error. I don't have that much experience in bios setup.
Articles have said in BIOS setup Security is to be disabled. I suppose Legacy remains disabled(?). It is suggested that I shutdown and reboot.
BIOS Setup > Storage > Boot Order has this list:
UEFI Boot Sources
Windows Boot Manager
USB Floppy/CD[code]....
At bottom of this Boot Order Window are the options: F5=disable Enter=drag F10=accept ESC=cancel
Windows Boot Manager at the the top stops all other options.beneath it. How does that 'drag' work. Don'tr I have to move 'Windows Boot Manager' to the bottom?
And move ATAPI CD/DVD drive to the top? of this UEFI boot sources list?
Is it true that if there is an error in the BIOS Boot Setup and Windows 8.1 does not boot, the BIOS Setup will come up instead so one can do a fix?
View 18 Replies
View Related
Feb 13, 2014
I have Kubuntu 13.10 and Windows 8.1 installed on separate drives on my computer. Dual-booting through the Linux bootloader works fine, as in I can boot either Windows 8.1 or Linux without incident. However, whenever I boot Windows, it resets itself to the highest boot priority, and always re-adds a boot entry if I remove it. My question is, how can I get it to stop doing this? I can temporarily fix it through Linux, but I'd really like to stop it permanently, as it's starting to become a pain.
EDIT: It turns out my problem was related to a duplicate entry for Ubuntu. If you're having this problem and have tried to install Linux a couple of times, check to make sure that you only have one entry for it.
View 1 Replies
View Related
Mar 15, 2014
I'm trying to boot Windows 8.1 from DVD (for Nero backitup.) . I can get to the advanced settings option and even to the UEFI option. Once I get tothe UEFI restart the computer shuts down and then just sits there - power light on - but nothing on the screen. The screen stays asleep(?) if that is what you would call it.
I'm on an Acer Aspire AT3-605_ES20 desktop. They had an instruction to hit "delete" at the Aspire logo during boot. But I don't get an Aspire logo - it just starts up to the Windows log in screen. I turned off "fast startup". How I can change my boot order so I can boot from DVD?
View 5 Replies
View Related
Mar 9, 2013
Here are some of my system specs:
Dell Inspiron 17R 5721
OS Name Microsoft Windows 8
Version 6.2.9200 Build 9200
Processor Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz, 2401 Mhz, 2 Core(s), 4 Logical
BIOS Version/Date Dell Inc. A03, 10/24/2012
SMBIOS Version 2.7
Embedded Controller Version 1.01
BIOS Mode UEFI
Secure Boot State On
Boot Device DeviceHarddiskVolume1
Installed Physical Memory (RAM) 8.00 G
As so many others have written, I can't change the boot-up order which means at this time, I can only boot from the hard disk.
I am hopeful that it is my ignorance that prevents me from accessing and changing the order, and that some good hearted soul will set my down the right path.
View 9 Replies
View Related
Jul 30, 2013
When I access my UEFI during startup, the Boot Priority section is either empty or shows unrelated drives attached. I can select the drive from which to boot by clicking on the Boot Menu, then clicking on the drive desired.
I purchased a new Intel SSD and installed it as the "C" and "D" drives and was happily booting from that SSD until I added new HDDs to my system. I now have four HDDs plus the SSD. One of those HDDs still contains the original Root C bootup and Windows 8 system on it. I frequently now find the system, reason unknown, may choose to boot from the HDD rather than the SSD.
I cannot find the method for directing the UEFI bootup menu/priority steps... my goal is to have the computer boot from the SSD, which if it were to fail, then would secondarily boot from the HDD original Root C.
The computer arbitrarily changes the SSD from drive designation "C:" to "J:" and the HDD to "C:"... how to specify the SSD as the "C:" unless it fails or is removed? the computer system info:
View 9 Replies
View Related
Jul 14, 2014
I have an error message at boot time that says [fail] twice then boots normally.
I have tracked it down in other posts to the bios which I change and it works for awhile but then mysteriously changes itself back.
Here is what I do.
F2 at Dell logo
move tab to "boot"
Reorder the boot order to the following:
Windows Boot Manager
UEFI Onboard LAN IPv4
UEFI Onboard LAN IPv6
then save and exit
machine reboots without error message
Runs/boots fine for awhile then message reappears.
Going back into BIOS shows Windows Boot Manager has moved to the bottom of the list again.
Repeating the fix is only temporary.
How can I set up the BIOS to stay where I put it?
I have a Dell running Win 8.1
View 5 Replies
View Related
Jan 10, 2014
Windows 8.1: HP Pavilion 2475ea Desktop PC.
I have Secure Boot turned off. I have Legacy Boot turned on, but do not think that is needed.
This link gives me instructions to boot from CD but they seem not to make sense from No 2... [URL] .....
In that at 5-6-7 it seems to require me to select the CD then boot to Windows from HDD then restart and do the same again, but this time select CD again, or something??
I expected to set the device, then restart the computer and it would boot from the device, not restart Windows as described. I was able to boot from a WinPE 4b CD.
I then decided to try changing boot order in the UEFI BIOS. From then on the HP (F9) described menu showed 'Windows Boot Menu' only under UEFI Devices. I could only boot from CD after putting the order back to 'Windows Boot menu' at the top of the order list; after which, as long as the CD was in the drive the (F9) list showed the CD drive as selectable to boot from.
View 7 Replies
View Related
Feb 2, 2014
I've had Win 7 Pro on my laptop for over a year. I installed a 2nd hard drive to it recently and today I installed Windows 8 Pro on the 2nd hard drive. It's been a roller coaster of good & bad luck.
The first install went fine, until I tried to install the Windows 8.1 upgrade from the Windows store, then things went bad and I had to go into Windows 7 and eventually delete the Windows 8 volume and change it from MBR to GPT because of UEFI (no secure boot enabled). What a stretch of error messages telling me I can't install Windows 8 on the blank hard drive because it was or wasn't MBR or GPT, or the automagically made partitions weren't in the right order.
After spending over 7 hours twice in a row installing Windows 8, I finally find out that there's no boot option for Windows 7 anymore.
The only clue I have is to use a Windows 7 repair disk and use diskpart.exe and make the Win 7 drive "active" but that's a little foreign to me at this point.
I'm looking in Computer Management / Disk Management from within Windows 8.
Disk 0: SYSTEM D: 438 MB NTFS (lengthened from 199 MB with EaseUS because Acronis 2014 thought it too small while crashing), Healthy (Active, Primary Partition); Win 7 E: 930.98 GB NTFS Healthy (Primary Partition); HP_TOOLS F: 102 MB FAT 32 Healthy (Primary Partition)
Disk 1: 300 MB Healthy (Recovery Partition) {no letter}; 100 MB Healthy (EFI System Partition) {no letter}; C: 931.00 GB NTFS Healthy (Boot, Page File, Crash Dump, Primary Partition)
And several other external disks which don't deserve mention today.
View 1 Replies
View Related
Aug 21, 2013
First, some context: I have a Dell Inspiron 15R SE that came with Windows 8.
I've managed to get a working dual-boot system with Ubuntu 12.10. I can't remember exactly how I done that, but I remember that I had to disable secure boot. I think that the boot configuration those days was:
Secure boot: DisabledLoad legacy option rom: EnabledBoot list option: Legacy
This "configuration" worked perfectly for 6-7 months.
Then, one day (last week, can't remember the exact day), when I was using Windows 8 the computer crashed. I hard-rebooted and got this screen:
After executed boot-repair from a Ubuntu LiveCD dozens of times I've decided to eliminate Ubuntu temporarily and focus to get a system with Windows 8 working nice.
Then I used my recovery DVDs to recover the system. Yup, Windows has booted. But when I restarted first time I got the same error. Then I, digging a solution, pressed F12 after a reboot and got here:
The highlighted option allows me to boot into Windows 8. So I went to boot options (F2) and changed the following configuration:
Load legacy option rom: DisabledBoot list option: UEFI
Now I can boot directly to Windows without need to press F12.
But my objective isn't complete. I want to erase all Ubuntu entries from the seconds image and restore the legacy boot from the first imagem (because they worked before).
I did two things:
I erased all partitions related to Ubuntu (root partition and home partition).I created a Windows recovery disk (not a system recovery disk).
I used the recovery disk to run the automatic recovery procedure (I forgot the exactly name). I've runned it at least 10 times with no success. Then I went to command prompt to try the famous triad: bootrec /fixmbr, bootrec /fixboot and bootrec /rebuildbcd. Still, no solution.
View 2 Replies
View Related
Mar 24, 2014
After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.
I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.
I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.
View 4 Replies
View Related
Jun 28, 2013
I have installed Blue 8.1 on a separate drive in my system along side 8.0. When I restart the 8.0 boots unless I manually select the 8.1 drive in bios. How can I alter the Boot menu to add the option to boot from either OS?
View 3 Replies
View Related
Feb 18, 2013
Late last Fall I bought a new Desktop, an HP H81414, with Windows 8 installed with the intention of installing Windows 7 on an SSD. I migrated Window 8 to an SSD, removed that from the system, installed new SSD and put Windows 7 on it. Both worked fine. I wound up with 2 SSD's. capable of running on the EFI BIOS machine with Secure Boot turned off. I later bought a new laptop with Windows 8. I found the Win 8 with Classic Shell to be very acceptable.
What I would like to do now ,if possible, is to mount both SSD's in the HP case and switch to either one of them at boot.
View 3 Replies
View Related
Apr 28, 2014
I had windows 7 running on my computer. When windows 8 came out I used a second harddrive as the windows 8 installation drive. Windows 8 automatically setup a dual boot system where every time I started the computer it took me a windows screen where I could select either windows 7 or windows 8. This has been going on since Windows 8 was released.
I decided it was getting old so I decided it was time to remove the old windows 7 harddrive. I tried doing it inside the windows 8 dual boot screen but could not find an option. So I decided to reformat the windows 7 harddrive. I did this in command prompt mode. After doing so when my computer restarted it said it could not find any harddrive to boot. Windows 8 is installed on the other harddrive, the one that was not reformatted. So how do I get it to start using that harddrive as the boot drive? I checked my bios and even physically disconnected the old HD that had windows 7 on it, but none of that seemed to work even though the Windows 8 HD is definitely in the boot order in the bios.
View 5 Replies
View Related
Jan 6, 2013
Here: [URL] .....
Somewhere in that link it says:
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection
Others say: <F8> No uefi setup option in boot selection
I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
View 3 Replies
View Related
Apr 4, 2014
I get as far as " a driver is needed to continue installation" not found, make sure its on the right media. Here is what i got done on my own..
1- BIOS setting "legacy" and U E F I" boot from USB.
2- F 9 to choose boot order.. selected USB device
3- Installation starts for WIN 7
4- Driver is needed to continue, and i have no clue what it is..some one pointed me to . f 6 f l p y-x 64 because its an HP Envy...
5- Driver not found / wrong driver..
6- Shut down restart.......................
My DVD is Windows 7 ultimate X 32, X 64..
No matter what i cant boot form my USB /U E Fl /WIN 7 pen drive.seems like its not recognized or drivers for the USB chip set not installed.. Of course using the O E M DVD of win 7 fails. because of the G P T style.
View 2 Replies
View Related
Jan 6, 2013
I have Samsung slate xe700t1a and recently downloaded and installed the lates bios from Samsung. After the installation the machine rebooted and all I get is black screen. Not even the Samsung logo, just the blue power led light comes on. I have tried all the button combo boot up power windows key, vol up and down and nothing can't even access the bios. I contacted support and that was a waste of time. Maybe removing ssd drive and connecting using mini sata to sata cable on my pc.
View 2 Replies
View Related
Aug 25, 2014
I have a Samsung NP9000 model NP900X4C-A05AU. It regularly crashes due to full memory. It has 8G of RAM, running Windows 8.1. It's done this since day 1 - I managed to remove some Samsung bloatware that mitigated the problem somewhat, i.e. from once a day to three times a week. Mostly, just before it happens I get the "close some programs or lose some data" message, and I can possibly kill something (chrome usually) to free some memory so I can reboot cleanly. Usually at this point, the "Modified" section of the Task Manager Memory usage tab is quite big. Reboot and it's good for another couple of days.
Sometimes the "close some programs" message is too late... I get the message and almost immediately Windows crashes and reboots. Up until last week, this didn't cause any issues after the reboot. But last week, it did this, gave me the message and immediately crashed. It took about 1 hour for it to reboot, sitting at the "please wait" dots. I was in the process of making a recovery USB to boot from when it finally came to life. Everything seemed ok, was able to start things up, and carried on as usual. Couple of days later, get the "close some programs" message, and am able to reboot. But the laptop takes 5 to 10 minutes to reboot. Up until I had this issue, a reboot would take 5 to 10 seconds (to get to the login prompt). Even a reboot after just rebooting takes 5 to 10 minutes. I've run scans on my SSD, it says everything is ok. Every reboot now takes 5 to 10 minutes.
View 3 Replies
View Related
Sep 9, 2013
I swapped out a HDD in a samsung NP355E5C-A01AU laptop which i cloned all the recovery partitions from the original to the new HDD. Its a windows 8 partition and everything seems to be there but the laptop wont boot from it at all, it just goes into bios. I did get it to try and read from the recovery partition but get a "MBR error 1" when it tries to boot from it. I used aronis disk director 11 to do the cloning if that works. Also the original HDD was a GPT partition and thats wat i have formatted the drive as. Ive done some reading and acronis can be difficult when cloning recovery partitions and it will give u this MBR error.
View 2 Replies
View Related
Feb 20, 2013
I got a samsung np700 get two bleeps when opening programs and on boot up.
Turned of windows default sounds did not work ....
Turned off bleep warnings in the registry, but stuck with two bleeps on boot up, i thought startup one bleep was normal but the store says two bleeps are ok.
Just wanted confirmation from another user that 2 bleeps are normal with samsung as the store did not seem too confident.
[No error messages, pc running ok, sfc & chkdsk ok, devicemanager list ok] ....
View 9 Replies
View Related
Dec 3, 2011
I cannot boot Windows 8 without the DVD but I'm thinking its not Windows 8 and the bootloader its my motherboard along with the IDE 2nd hard drive (BIOS settings?). I get a message about my secondary maxtor IDE drive upon boot up. It says something like choose the following 1) FD No Emulation system HD00 2) FD No Emulation system HD00 2). It doesn't stay there too long it defaults to 1) and then says press any key to boot to DVD... then it boots up to Windows 8. However, if I do not have the Windows 8 DVD in the IDE DVD drive it will not boot it just flashes the "_" underscore and hangs. If the DVD is in the drive it works.
Gparted partition tools shows the correct boot flag. I'm not sure about the Fdisk status of the partition table maybe that will be next. I'm wondering if I should try the bootrec /fixboot command but concerned about having to start from scratch again.
ASUS M5A88-V EVO AMD 880G AM3+
Kingston Memory KHX1600C9DX2K2/8GX Hyper x Gray 2X4GB (8GB)
Thermaltake TR2 600W ATX12V
AMD X4 970 black edition
No video card yet
Western Digital 160 GB sata (Not a Raid just a default setup)
Maxtor 160GB IDE
Phillips DVD 16x IDE writer.
Standard DVI monitor & cable
Antec 300 case.
View 6 Replies
View Related
