I had a friend setup win 8 for me on my Lenovo y480 Laptop which has 8 GB RAM. He used 1GB of said RAM to aid in start up and overall performance I think. When I look at my system's info (right click on My Computer and clicking properties) I see 8 GB (6.91 GB RAM usable).
View 5 RepliesI have installed windows 8 on a windows 7 PC on a separate hard disk. But I am unable to get boot option at startup. Every time I have to select windows 8 boot disk from bios boot menu.
View 3 Replies View RelatedI have been using Windows 7 Pro (64) for several years, and today installed a newly purchased Windows 8 Pro (64) OS. I looked on-line and found many articles on how to multi-boot back to Windows 7 after installing Windows 8, and believe I have done this correctly (more below), but when booting up I do not ever see a multi-boot menu, my system boots directly into Windows 8.
When installing Win 8, I booted from my CD/DVD drive with the Win 8 OS media in the drive. (I had previously reduced the volume of my Windows 7 drive and created a new partition that I called "Windows8". ). At the appropriate time in the Win 8 install I chose "Custom", then chose the newly created "Windows 8" partition, then proceeded with the Win 8 OS install. As mentioned above, I do not see the multi-boot menu when booting up, however when in Windows 8 I can see the Windows 7 drive in "Computer", so it was not over-written.
Startup Options - Choose a Default OS to Run at Startup in Windows 8
and am wondering if I should try Options 2 through 4 (1 of)? I build my own PCs so know something about PC's, bt not much about booting to an OS.....
Another options might be installing a third party boot manager, which I have not yet done.
my reason for getting back to Win 7 is to be able to use the PC while I learn and setup Win 8 over time. I went into this believing that getting a multi-boot capability would be very easy.
My troubles began just after an amicable game of Starcraft with my siblings (Starcraft 1 running through chaoslauncher in window-mode and LogMeIn Hamachi, on Windows 7 at the time). Apparently I closed out of the application too hastily, since my system seized and displayed a lovely and very informative BSOD (STOP: 0x00000116; nvlddmkm.sys).
This BSOD would return every time I would boot Windows 7, sometime during the loading screen. However, I could access safe mode just fine. I did some research and decided to reinstall the graphics driver through safe mode, but it didn't seem to work. Since this PC is primarily for games and all my important documents/media were synced with my laptop, I decided to wipe the HDD (using DBAN) and take this opportunity to upgrade the OS.
I got an .iso of Windows 8.1 from my university and created a bootable DVD using the Windows USB/DVD boot tool. Now when I attempt to boot it in my PC, the blue Windows 8 icon appears for about a minute and then the system restarts. I've put the boot disk into another computer and it won't even display the Windows 8 logo. It simply skips the disk boot even though I select 'boot from disk.' I've tried all of this with about 5 different DVDs using ImgBurn as well as the Windows USB/DVD boot tool.
Strangely, my Windows 7 boot disk loads just fine on the wiped PC, to the point where I can select the language, etc. and control the cursor.
Is it possible that the Windows 8 boot disk loads a display driver that is incompatible with my GPU? Or is it more likely that the disk burner I'm using is garbage? Could any tools on something like the Ultimate Boot CD provide any useful information?
COMPUTER INFO
PSU: 600 Watt (OCZ600MXSP)
Mobo: MSNV-939
CPU: AMD dual-core, not sure of exact model, couldn't find an invoice for it and my HDD is wiped
GPU: Palit 9600GT sonic 1GB DDR3
RAM: 4 sticks of Kingston ValueRAM 1 GB 400MHz PC3200 DDR DIMM (KVR400X64C3A) - might have 2 sets of 2 different 1GB models, but 2 of the sticks have heat-sink covers that I couldn't remove
HDD: Maxtor 6G160P0 160GB ATA133 7200rpm 8MB Hard Drive
Over the last few days I built a new PC with ASUS A87 Pro MB, no PCIe cards, and Samsung ssd 840 Pro boot drive. Lots of changes on a daily basis. For a while, the FAST STARTUP hybrid boot was working. Then it stopped, and I'm trying to debug it.
When PAST STARTUP is enabled in power options, I get a repeatable Critical Error - Windows did not shut down properly, and the startup time is as long as it would be without FAST STARTUP enabled. There are no BSODS, and no apparent harm from the Critical Shutdown error.
why it is that I have trouble browsing in high speed despite the fact that the wireless adapter receives data at 1 Mbps minimum? I haven't been able to watch videos on Youtube, read the news etc because the browser takes ages to load the full page. I checked which applications are connected and they haven't exchanged much data as you can see below:
View 6 Replies View RelatedSo I ran speed test with several different website and they all said my download speed is between 5 Mbps and 8 Mbps :
However when i actually download something my download speed stay at 1 Mbps or when i watch videos ( youtube) I don't have this problem with my phone !
How to boost the read/ write speed of my Hard Disk Drive. Someone told me about some innovation in Windows 8 such as Superfetch, Prefetch, Ready Boost, etc - something that is supposedly utilizing the idle capacity of your RAM/ SSD to boost the read/ write speed in the Hard Disk Drive.
Currently, my laptop is setup as follows;
120GB C Drive: running on SSD - has the Windows 8 and all apps installed in it,
500GB D Drive: has all the Libraries folders installed in it.
RAM = 4GB. PLanning to increase it by an additional 4GB.
Hence, how can i use the SSD or RAM to improve on the Hard Disk read/ write speed? Currently, my Intel SSD toolbox is showing as follows:
Question is how do we know if Superfetch / Prefetch is enabled based on the printscreen shown above? It just show that the feature is optimised.
By the way, can we transfer the following folders from C Drive to D Drive? Will it affect the computer performance?
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
View 9 Replies View RelatedHere: [URL] .....
Somewhere in that link it says:
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection
Others say: <F8> No uefi setup option in boot selection
I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
Here's my issue; I am a math and science teacher in a public middle school and am outfitting my class with thirty brand-new Lenovo touch computers. I consider myself above-average savvy with computers, having worked with every version of Windows extensively since the late 80s and DOS. The only OS that I haven't spent much time on is Windows 8.
These computers are all brand-new and of course have legal copies of Windows 8 -- irritatingly, though not yet updated to 8.1. Soo...It took me a larger part of one day just to get ONE of these computers ready for class use. It involved several stages of the Windows update/reboot dance, followed by removing myriad unneeded bloatware applications, setting up multiple child accounts on the machine, and finally installing some freeware educational materials needed for instruction. It was all unbelievably tedious!
I turned around and look at all the remaining twenty-nine computers with dread. Obviously I'm trying to work out some kind of shortcut to avoid having to spend my whole summer updating each of the new machines individually. In an ideal world, I would make some sort of image of the machine that I just spent several hours updating/configuring, and then replicate that across the other twenty-nine. In terms of hardware, this shouldn't be a problem since all of the machines are exactly the same make and model. But I anticipate other problems such as, for example, the serial number of the Windows version and the computer name will then be the same on all the machines and have to be adjusted. There very well could be other issues with replicated serial numbers, etc.
I'm thinking maybe I just have to bite the bullet and work at each individual computer one of the time. And then image them individually so that when the kids mess around with them, I can do an easy restore. How I could make this work?
When I run setup I get this message:
"Something happened, We can't tell if your PC is ready to continue installing windows 8. Try restarting setup"
What can I do?
I have a Dell Inspiron 7720. I have created an uefi bootable usn flash disk with rufus 1.4b
I'm trying to boot from it so i can create a Windows 8.1 uefi installation and the problem is that the usb flash disk wont boot.
I have secure boot enabled and legacy option rom disabled.
I have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
View 1 Replies View RelatedI get as far as " a driver is needed to continue installation" not found, make sure its on the right media. Here is what i got done on my own..
1- BIOS setting "legacy" and U E F I" boot from USB.
2- F 9 to choose boot order.. selected USB device
3- Installation starts for WIN 7
4- Driver is needed to continue, and i have no clue what it is..some one pointed me to . f 6 f l p y-x 64 because its an HP Envy...
5- Driver not found / wrong driver..
6- Shut down restart.......................
My DVD is Windows 7 ultimate X 32, X 64..
No matter what i cant boot form my USB /U E Fl /WIN 7 pen drive.seems like its not recognized or drivers for the USB chip set not installed.. Of course using the O E M DVD of win 7 fails. because of the G P T style.
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
Because it does not contain enough free space. Clearly I have enough free space... [URL] ....
What should I do? I want to do a dual boot, so I can keep Windows 7 in case I don't like 8.1...
I formatted and deleted that partition and I tried again with 201gb, and no luck. [URL] ....
In Windows 7 I could adjust the thickness/width of the windows borders.
In Windows 8 I could not find this option in
Personalization-->Window color and appearance-->Advanced appearance any more.
Im trying to install Windows 8 (Not 8.1) but it gets stuck at the booting screen (Where setup shuold load files)
My system specs are on my profile.
I am trying to setup a new Windows 8 computer that is going to be a gift. I need to go through the setup procedure so I can install some software which is also part of the gift. How can I do this without having to use a Microsoft account, or at least with leaving the least amount of account remnants for the new user?
View 2 Replies View RelatedI'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps.
View 4 Replies View RelatedI've been trying to install the printer software for an HP Laserjet printer and can't get it installed. I've even had an HP tech person try to install it via remote control and he couldn't. I was told that something on my system is preventing the installation.
I ran sfc /scannow and it found corrupted files that it couldn't repair. I would be happy to send any log files that may be needed.
I have tried updating my Windows 8.1 Pro (64-bit, upgraded from Windows 8 Pro) with the new "Update 1" (KB2919355) but it always fails with ERROR code 8007005 (or 80073712).
What I have tried do to fix:
Run WindowsUpdateDiagnostic (that e.g. removes files from C:WindowsSoftwareDistributionDownload and cleans Windows update history metadata info)DISM.exe /Online /Cleanup-image /ScanhealthDISM.exe /Online /Cleanup-image /RestorehealthDISM.EXE /online /cleanup-image /startcomponentcleanup
After all of this, still the update (KB2919355) fails
There must be something that Microsoft needs to fix, there are xxxxxxxxxxxx amount of similar complains and reports out there...
I decided to install Win 8.1 RTM x64 yesterday but what I expected to be a breeze turned into a nightmare. Installation fails, I am even unable to get into Safe Mode.
I was running Win 7 Ultimate x64 before without any issues whatsoever.
I already described my issues here, with errors and logs: Windows 8.1 RTM installation fails on Dell XPS 1340
Changed memory from 2x4GB to original 2x2GB but completely same issue
I partitioned my hard disk into a 150GB (C) and 500GB (D) and upgraded from Win7 to Windows 8 (and subsequently Windows 8.1 after the recent updates). The OS is installed onto the C Drive.
Performed a Clean Installation of Windows 8 on my C Drive. Under the Choose What To Keep Option, I selected Nothing.
Technically speaking my C Drive would have been wiped clean but after the Windows 8 installation, my C Drive only has 5GB of space left (145GB is being used). The Windows 8 OS is not detecting any of the old programs in my C Drive and the automated Disk Clean up feature only offers removal of temporary internet files. Which brings me to one possible assumption...
The Clean Installation Failed. Windows 8 simply installed itself again on my C Drive and the remaining disk space (containing my previous Windows 8.1 OS and programs) is locked down somewhere. I suspect this had something to do with changing my HD format 3 years ago when I wiped clean my pre-loaded ASUS laptop Win7 and partitioned it to install my Windows 8.
How to remove my previous OS?
I'm trying to install Windows 8 on my pc (hp pavillion g6) which its hdd is completely empty; but it gets stuck on expanding files at 98%
I'm installing it via dvd
Is it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
I updated one laptop with one promo code bought etc and all fine. Came to do the same with another pc but after i inserted the promo code and clicked to submit the payment the screen froze at that point and wouldn't go any further.
Have received an email from Paypal to tell me the payment has been processed but obviously when i try to re-install it etc it's asking me for a promo code and to pay again... i can't carry on from where i left off !! what i can do now?
This is all done via the online offer and Windows Upgrade Offer using the downloaded Upgrade Assistant.
I have recently formatted my old windows. But now I am not able to install windows 8(actually even windows XP and seven) . When I try to boot from USB setup starts But 'Getting files ready' (which is second step of installation) stucks at midway like at 14% or 52% or 74% i.e. at any arbitary percentage and nothing happens . Actually I am able to move my cursor but installation no more proceeds further . I have tried to format many times and to run installation but everytime installation stuck at midaway without any error .
My laptop specs are : Acer aspire 5745 , 500GB HDD , 3GB RAM , intel core i3 processor
I created a setup USB with the ISO of Win 8.1 and its now out of date after the Spring Update 1. With XP you could slip stream service packs and updates. How I can incorporate Update 1 into Win 8.1 Setup USB stick?
View 6 Replies View Related