I have the flash drive made properly, but whenever I try to boot it, I get a 0xC000000D (Unreadable Boot Config) error.
The system is a brand new ASUS F55C with 8GB ram and a 120GB Samsung 840 SSD.
I get the same error when I try on other F55C's I have...
I don't usually need to downgrade, but my client will not use 8 so I'm stuck.
I have an ASUS U32VJ laptop (Complete USB 3.0 ports - no 2.0, i5 3210, HD4000+GT365M, 4GB RAM).
I want to install Windows 7 64bit for now and just leave Windows 8 in a partition I will not look at.So i partition off the data drive ASUS left for me and give a fat 200GB+ for a Windows 7.
I get the following when I try to boot from via EFI menu and even through the BIOS to go EFI from USB:
further below, printscreens of bootx64.efi location and the cmd commands:
Could this problem be caused due to having a 2.0 USB stick in USB 3.0? There aren't any USB 2.0s on this machine unfortunately?
Here's my issue; I am a math and science teacher in a public middle school and am outfitting my class with thirty brand-new Lenovo touch computers. I consider myself above-average savvy with computers, having worked with every version of Windows extensively since the late 80s and DOS. The only OS that I haven't spent much time on is Windows 8.
These computers are all brand-new and of course have legal copies of Windows 8 -- irritatingly, though not yet updated to 8.1. Soo...It took me a larger part of one day just to get ONE of these computers ready for class use. It involved several stages of the Windows update/reboot dance, followed by removing myriad unneeded bloatware applications, setting up multiple child accounts on the machine, and finally installing some freeware educational materials needed for instruction. It was all unbelievably tedious!
I turned around and look at all the remaining twenty-nine computers with dread. Obviously I'm trying to work out some kind of shortcut to avoid having to spend my whole summer updating each of the new machines individually. In an ideal world, I would make some sort of image of the machine that I just spent several hours updating/configuring, and then replicate that across the other twenty-nine. In terms of hardware, this shouldn't be a problem since all of the machines are exactly the same make and model. But I anticipate other problems such as, for example, the serial number of the Windows version and the computer name will then be the same on all the machines and have to be adjusted. There very well could be other issues with replicated serial numbers, etc.
I'm thinking maybe I just have to bite the bullet and work at each individual computer one of the time. And then image them individually so that when the kids mess around with them, I can do an easy restore. How I could make this work?
I have windows 8 installed from dvd and after a restart the pc won't boot anymore. It tells me:
Your pc needs to be repaired. The required boot configuration data file is missing some required information.
File bootbcd
Error code 0xc0000034
So I tried to rebuilt the bcd, used the bootrec commands , tried auto repair, tried system recovery but nothing seems to work.
I reinstalled windows 8.1 on my Samsung NP530U3C-A10EE. And now the problem this that I can't boot it without usb stick that contains windows installation files. I can boot up windows and remove the usb stick evertything is working perfectly, but if I try to boot up win without usb, it gives error "Operating system not found. Press CTRL+ALT+DEL to restart". VOLUME C: is one where windows are installed (SSD), System Reserved is the system partition that windows create automaticaly (SSD), volumes D: and F: are my hdd volumes D: is empty & F: is stored with my personal files (photos, music etc.)
View 6 Replies View RelatedI am having a problem with a new Dell Inspiron 15 3520 that came with Windows 8 installed and that I had been using for only a month when it went bad.
The problems started when I turned it off about ten days ago, and went I turned it back on a couple days later, and it was stuck in the apparently famous Windows 8 "Automatic repair couldn't repair your pc"/BSOD loop. I was not able to boot into safe mode. System restores made no difference. Somewhere along the line I found something that said that I had an "inaccessible_boot_device error".
From the repair menu maze, I was able to get to a command prompt. I used this to copy almost all of my files off of computer.
Chkdsk showed no bad sectors, no bad partition records, or other irregularities. sfc returned "Windows Resource Protection did not find any integrity violations". Some test (I do not remember which) showed that the boot record and BCD were fine. The Dell hardware diagnostic test showed everything working fine.
I am thinking that it is possible that the source of this was a virus or mechanical problem (I saw no evidence for either). If I had to guess, however, I would imagine that the computer stopped working after an automatic update pushed a corrupted/incompatible driver. I have seen discussions online about people having problems with NVIDIA video and/or SATA AHCI Controller drivers, and Windows 8 getting corrupted and stuck in the BSOD loop from that. At some point I saw a Windows Update Log (I am not sure where), that showed that, as Windows shut down the last time it was functional, automatic updates installed a new AHCI driver.
I tried downloading some new drivers for the 3520 from the Dell web site and installing them on the dead computer through a thumb drive and the command prompt. The downloads are all executables, however, and when I tried to run them, I get the message, "the subsystem needed to support the image type is not present". I believe that this message means that the driver executables are 32bit apps and won't run from a 64 bit command prompt. I also tried to use the "Drivers and Utilities" disk that came with my PC to do some driver rollbacks, but, I can't understand the file names or folder structure on the disk, and, when I try some to run some of the exe files ("setup.exe", for example) to get a gui interface, I get the "the subsystem needed to support the image type is not present" message.
After working on the problem for a while, I borrowed a friend's Windows 8 installation disk set. The computer will boot to the repair options off of the 64bit disk, but not the 32bit one. I did attempt a System Refresh off of the 64bit disk, and got back the message, "The drive where Windows in installed is locked. Unlock the drive and try again."
Around the time that I was messing with the BIOS settings to get the computer to boot off of the Windows 8 disk, I started getting a message "Your PC needs to be repaired - Boot Configuration Data file is missing some required information -- File:BCD -- error code 0xc0000034" at the start of my boot ups. I am not sure if I deleted a file somewhere during my repair efforts, or if I am getting this message because the computer is confused in efforts trying to boot off of the DVD. I get this message even with the DVD removed and the BIOS set to boot off of the Windows Boot Manager, however, so I am guessing that a file is now missing. And the message stops me from getting into the repair menus/command prompt any other way except through the installation disk.
I have a problem where I turn on my pc and get error code 0xc0000225. It's and Acer desktop I bought July (2013) for a little B-Day present . But now it stopped working. I can't take it to a repair shop because
1. I'm not a fan of them
2. They tend to take like a week :I
I need it soon I'm only using my other laptop. I make like intro/outro's for people and I have one person who asked me a week ago which I feel bad about. Plus all my school work is on there and my dad also has his job documents nothing can be erased on there.
I have got the recovery page that loads up first
currently using windows 8.1 OS
File:BCD
Error Code: 0xc0000034
I dont have a recovery CD or USB, so im pretty stuck at what to do now.
Currently using an Asus U32v
i5 2.5ghx
6gb Ram
500gb hd
Geforce gt 635m 2GB
Today when I played my favorite game ( entropia universe), I got a message from my game saying that I have low ram, I checked on the Ctrl alt del thing and I was shocked that only 3.8 gb ram was usable when i have 8 gb ram and using 64 bit system. So here comes to my first question... Why would this happen?
So I happened to follow a tutorial and turned on the maximum ram checkbox in the advanced settings in boot tab in msconfig. However when I first reboot I got the session 3 initialisation failed BSOD. The second time and third time and so on and so forth I got bad system config info, which turned my computer into a reboot loop. Second question, why would this happen?
My experience similar to this unlucky fellow : Win 8 BSOD : BAD_SYSTEM_CONFIG_INFO (Details available)SOS
so I followed the guide in the thread and tried to recreate my BCD. I successfully got into the advanced setup options ( I think it is called this ?) by pressing shift +f8.
However I still failed as I was locked there. Every option including opening the command prompt is blocked because it said that operating these options needed administrative rights which I have in my hands. However the ASO said that it can't find any administrative accounts in my computer. Third question , why would this happen?
So now my computer fell into another loop. Whenever I started my computer it went into the ASO and wouldn't get away from it. And can't even see the lovely face in BSOD.
I am am using windows 8.1 in amd fx 8150 and 8 gb ram, computer was somehow normal with occasional freezing ( 1-2 times a month ).
I've had Win 7 Pro on my laptop for over a year. I installed a 2nd hard drive to it recently and today I installed Windows 8 Pro on the 2nd hard drive. It's been a roller coaster of good & bad luck.
The first install went fine, until I tried to install the Windows 8.1 upgrade from the Windows store, then things went bad and I had to go into Windows 7 and eventually delete the Windows 8 volume and change it from MBR to GPT because of UEFI (no secure boot enabled). What a stretch of error messages telling me I can't install Windows 8 on the blank hard drive because it was or wasn't MBR or GPT, or the automagically made partitions weren't in the right order.
After spending over 7 hours twice in a row installing Windows 8, I finally find out that there's no boot option for Windows 7 anymore.
The only clue I have is to use a Windows 7 repair disk and use diskpart.exe and make the Win 7 drive "active" but that's a little foreign to me at this point.
I'm looking in Computer Management / Disk Management from within Windows 8.
Disk 0: SYSTEM D: 438 MB NTFS (lengthened from 199 MB with EaseUS because Acronis 2014 thought it too small while crashing), Healthy (Active, Primary Partition); Win 7 E: 930.98 GB NTFS Healthy (Primary Partition); HP_TOOLS F: 102 MB FAT 32 Healthy (Primary Partition)
Disk 1: 300 MB Healthy (Recovery Partition) {no letter}; 100 MB Healthy (EFI System Partition) {no letter}; C: 931.00 GB NTFS Healthy (Boot, Page File, Crash Dump, Primary Partition)
And several other external disks which don't deserve mention today.
First, some context: I have a Dell Inspiron 15R SE that came with Windows 8.
I've managed to get a working dual-boot system with Ubuntu 12.10. I can't remember exactly how I done that, but I remember that I had to disable secure boot. I think that the boot configuration those days was:
Secure boot: DisabledLoad legacy option rom: EnabledBoot list option: Legacy
This "configuration" worked perfectly for 6-7 months.
Then, one day (last week, can't remember the exact day), when I was using Windows 8 the computer crashed. I hard-rebooted and got this screen:
After executed boot-repair from a Ubuntu LiveCD dozens of times I've decided to eliminate Ubuntu temporarily and focus to get a system with Windows 8 working nice.
Then I used my recovery DVDs to recover the system. Yup, Windows has booted. But when I restarted first time I got the same error. Then I, digging a solution, pressed F12 after a reboot and got here:
The highlighted option allows me to boot into Windows 8. So I went to boot options (F2) and changed the following configuration:
Load legacy option rom: DisabledBoot list option: UEFI
Now I can boot directly to Windows without need to press F12.
But my objective isn't complete. I want to erase all Ubuntu entries from the seconds image and restore the legacy boot from the first imagem (because they worked before).
I did two things:
I erased all partitions related to Ubuntu (root partition and home partition).I created a Windows recovery disk (not a system recovery disk).
I used the recovery disk to run the automatic recovery procedure (I forgot the exactly name). I've runned it at least 10 times with no success. Then I went to command prompt to try the famous triad: bootrec /fixmbr, bootrec /fixboot and bootrec /rebuildbcd. Still, no solution.
After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.
I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.
I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.
I have installed Blue 8.1 on a separate drive in my system along side 8.0. When I restart the 8.0 boots unless I manually select the 8.1 drive in bios. How can I alter the Boot menu to add the option to boot from either OS?
View 3 Replies View RelatedLate last Fall I bought a new Desktop, an HP H81414, with Windows 8 installed with the intention of installing Windows 7 on an SSD. I migrated Window 8 to an SSD, removed that from the system, installed new SSD and put Windows 7 on it. Both worked fine. I wound up with 2 SSD's. capable of running on the EFI BIOS machine with Secure Boot turned off. I later bought a new laptop with Windows 8. I found the Win 8 with Classic Shell to be very acceptable.
What I would like to do now ,if possible, is to mount both SSD's in the HP case and switch to either one of them at boot.
I had windows 7 running on my computer. When windows 8 came out I used a second harddrive as the windows 8 installation drive. Windows 8 automatically setup a dual boot system where every time I started the computer it took me a windows screen where I could select either windows 7 or windows 8. This has been going on since Windows 8 was released.
I decided it was getting old so I decided it was time to remove the old windows 7 harddrive. I tried doing it inside the windows 8 dual boot screen but could not find an option. So I decided to reformat the windows 7 harddrive. I did this in command prompt mode. After doing so when my computer restarted it said it could not find any harddrive to boot. Windows 8 is installed on the other harddrive, the one that was not reformatted. So how do I get it to start using that harddrive as the boot drive? I checked my bios and even physically disconnected the old HD that had windows 7 on it, but none of that seemed to work even though the Windows 8 HD is definitely in the boot order in the bios.
When I run setup I get this message:
"Something happened, We can't tell if your PC is ready to continue installing windows 8. Try restarting setup"
What can I do?
I've been trying to install the printer software for an HP Laserjet printer and can't get it installed. I've even had an HP tech person try to install it via remote control and he couldn't. I was told that something on my system is preventing the installation.
I ran sfc /scannow and it found corrupted files that it couldn't repair. I would be happy to send any log files that may be needed.
bypass this error code installing my win 8 software
"your computer needs repaired
error code: 0xc0000260
Here: [URL] .....
Somewhere in that link it says:
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection
Others say: <F8> No uefi setup option in boot selection
I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
I get as far as " a driver is needed to continue installation" not found, make sure its on the right media. Here is what i got done on my own..
1- BIOS setting "legacy" and U E F I" boot from USB.
2- F 9 to choose boot order.. selected USB device
3- Installation starts for WIN 7
4- Driver is needed to continue, and i have no clue what it is..some one pointed me to . f 6 f l p y-x 64 because its an HP Envy...
5- Driver not found / wrong driver..
6- Shut down restart.......................
My DVD is Windows 7 ultimate X 32, X 64..
No matter what i cant boot form my USB /U E Fl /WIN 7 pen drive.seems like its not recognized or drivers for the USB chip set not installed.. Of course using the O E M DVD of win 7 fails. because of the G P T style.
Okay so yesterday, I was using my laptop (Asus k45vm) and things started getting laggy. It got to the point were I had to restart it and after that was when everything went downhill. I loaded up to the Windows logo and the spinning dots, didn't get further than that. So I restarted again and mashed the f8 key (I later tested out all the keys), laptop scanned and "fixed" the problem. Still didn't work. So then in a fit of rage, I pulled the battery out, it loaded to the logo screen a few times after, but now right after the Asus boot screen, the screen goes black (without any cursor). F8 (and the rest) doesn't work anymore (no more boot screen). But if I wait for 5 min , a blue screen with:Recovery
Your PC needs to be repaired
The Boot Configuration Date file is missing some required information.
File:BCD
Error Code: 0xc000000d
You'll need to use the recovery tools on your installation media. If you don't have and installation media, contact your system admin or PC manufacturer. And then it shuts down in a minute.
So I created a bootable usb with win 8, Fat 32, uefi and all that , but it still goes to the black screen followed by the error. At this point I doubt that I can get into advanced boot options.
Even though I boot the laptop with the usb plugged in, it still says :You'll need to use the recovery tools on your installation media. If you don't have and installation media, contact your system admin or PC manufacturer.
[URL]
I am trying to install Win 8.1 from pendrive, i try to install win 8 too from pen drive getting same error.
View 1 Replies View RelatedI recently built a rig (spec below) and originally installed windows 7.
I decided today I would install windows 8.1 as I get it for free from my university. I booted the installation disc in EFI mode, wiped the SSD and deleted all partitions. I let windows create the partitions it needs and proceeded to install.
The installation got up to 2% in expanding windows files and showed error:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code: 0x800070570.
I rebooted and tried again several times and the same thing happened whether I chose EFI cd boot or not.
I then reinstalled windows 7 without any issues, and downloaded an 8.1 pro disc image from mydigitallife. The installation got a little further into expanding windows files, but the same error came up again.
Ive been reading that it may be a memory issue so i'm the process of reinstalling windows 7 and running memtest86+, but I doubt this is the case as its a mew system and windows 7 has no trouble
System Spec:
Mobo: Asus P8 Z77-V LX2
CPU: Intel i7 2600k (no overclock)
RAM: Crucial 8GB DDR3 1600mhz (one module)
GPU: GeForce 650Ti
My Windows 8 installation crashed this AM and the repair tools couldn't fix it. I ran the "Reset" option, which keeps my settings and data but reinstalls Windows 8. Well, things seemed to go OK, but none of my settings were kept (I had to reconfigure Outlook 2013, etc... and I'm getting this error now, which is preventing me from installing Acronis, Nero and VDownloader.
View 5 Replies View RelatedI have downloaded Windows 8 Pro 64-bit through the students/partner site and burnt it on a DVD. When I boot from it though I get many types of errors....the most common is 0xc0000098 that says that my PC needs to be repaired and that one or more files are missing or contain errors...I have also tried burning 3 different dvds with different programs to make sure it's not a program's fault but still with no results..
View 9 Replies View RelatedCreated a bootable flash drive using Universal USB Installer from WindowsBlue-ClientwithApps-64bit-English-X1899605.iso. Create completed successfully with 452MB of free space left on a 4GB flash drive.
During install, I get this about 10 seconds after the ugly fish appears during install.
I'll burn a DVD and try it but much prefer a flash drive for install.
Downloaded from Windows.com. Installed and upon final reboot got this error. "The OS couldn't be loaded because the kernal is missing or contains errors." Suggests doing a repair??? by inserting the Disk. Don't have disk, it was a download. What to do next? Is the main file on the HD that I could burn to DVD or??
View 6 Replies View RelatedI created USB Drive by Rufus to install UEFI Win 8 x64 Pro, but when I boot by USB, I have this error PC need to be repaired. My mainboard is Gigabyte B75 D3H
View 2 Replies View RelatedI bought Dell inspiron with pre installed windows 8. My research says that it has product key on bios. It came with only one partation. I tried to shrink c and making new partations using epm. after boot I got this error. "A required device is not connected or can't be accesed." I have nither any recovery disk, nor installation disk nor dell disks. I tried to search on internet somewhere I found that this problem is due to currption of boot manager. My laptop has gpt partations scheme. I can probably repair my boot manager using How can I repair the Windows 8 EFI Bootloader? - Super User. But as I said I don't have any disks.
View 9 Replies View RelatedI installed a free utility Rebuild icon cache that I used extensively in Win 7. This utility needs .NET Framework 2. When I run the utility it appears a notice: parsing or parser error 0xC00CE556 with some bla bla .....machine.config. default. Hit OK, then the utility works as always. Looks like a false error warning.
Checking in the Forums I made the following attempts to correct this:
sfc/scannow (as ADM)unistall all .NET (3.5 that includes 2, and 4.5.) and re-install them through Windows Update.
Unsuccessfully.
The problem is really very minor, however is annoying I am not going to re-install whole Windows 8 to get rid of it.
While setting up a new system tried to install win 8.1 and got the IRQL screen.
View 3 Replies View Related
