Since I installed 8.1, my machine is running hot, 45c, but when I shut down one of the many Service Host:Local Service(s), it drops back down to 20c, where it was always with 8.
I can manually shut it down each time.... but I's like to block it from starting in the first place. Shutting down seems to have no other effect other than dropping the temp.
I need to find a fix.... or go back to 8.
So I've been having this problem for days now, two tasks named Service Host: Local Service(Network Restricted) and Service Host: Local Service(No Network) keep using up ALL of my cpu, theyre usually accompanied by any app I have open, so my task manager is basically like this for example:
Service Host: Local Service(Network Restricted) 40% cpu usage
Skype 29% cpu usage
Service Host: Local Service(No Network) 26% cpu usage
If I close skype, the usage goes down to 2 percent for a brief second and then any other app I have open launches up instead of skype and uses up all of my cpu.
I've tried several virus scans and I've done my best to clean up the system but I still have this problem
I am using Dell Optiplex 3010 in my office.There are around 40 systems and all have same issue. Config is as follow
Windows 8 Genuine 64 bit
2GB DDR 3
Dell Optiplex 3010
Now the problem is there is one service Service Host: Local Network Restricted it consumes 100% disk usage and computer starts acting. I have to manually kill this process from task manager around 4-5 times to end it.
Recently I have noticed an unusually High CPU usage from 'Service Host: Local System (Network Restricted)(11)'
I have tried the fix from this thread, but it only works for a few minutes.
As soon as I start an application (Cadence Allegro PCB Designer 16.5 but I don't think it's relevant) my CPU usage gets to the roof and stays there long after I killed the application and I believe I every associated process. The CPU usage is so high that the battery will be drained after about 45 minutes (It usually last about 3 hours).
According to my task manager the responsible is "Service Host: Local System (Network Restricted)". As a matter of fact, preventing the executable from accessing the network sort of solves the issue. I don't believe I need that executable to access the network but I'd like to understand what kind of network service can consume that much CPU (was actually affraid of overheating) and to know if there's a more appropriate way to solve this.
I tried downloading AutoCAD on my laptop, but got an error message. I removed the McAfee which came with Windows, but no luck. I then also removed AVG and it managed to download.
I've then attempted to restart, however the 'Toshiba Leading Innovation' screen simply kept flashing at the start up and didn't continue.
After approximately 15 minutes of flashing, it's now stopped and the page is static.
It's been just over 20 minutes total now, and the page continues to be static with the fan making more noise than usual.
I've powered down twice, but this keeps happening...
Should I re-install windows?
My PC has one failing had, I'm totally aware of that Aaand I don't care a bit, ran failingly good for a couple a years.BUT its getting really annoying to constantly have this windows pop-up:
'Please back-up all your data!'
Running win8, Seagate hdd, ~4 years old
I sure disabled smart-hdd, And notifications over hdds in windows notification center
I have downloaded it. How do I get IE11 to recognize it. I still get these annoying ads.
View 2 Replies View RelatedI've started getting the Upgrade to Windows 8.1 now - it's free message when I boot up and it's annoying as heck. It locks up the computer and the only choice is to click the upgrade now button. I was able to Ctrl+Alt+Del and sign out then login again. Got the same annoying message but this time there was a Remind me later button.Is there any way to block it or prevent it from happening? I don't want to upgrade to 8.1 now and perhaps maybe never.This is as bad as a virus.
View 7 Replies View RelatedHow do I block access to certain websites in all web browsers (Internet Explorer, Mozilla, & Google Chrome)?
View 5 Replies View RelatedI'm not using the lists which are available for Hostsman I've just set it up to block Opencandy, but have not had time to test it yet to see if it works.
I'm just wondering if there are any other simple ways to block Opencandy from installing.
I use Peerblock, would it be possible to block Opencandy using this program?
Why can't the lists which are available for Hostsman and Peerblock not block Opencandy as default?
I am trying to block my personal files on my computer from the guest account and I was wondering how I do this?
View 5 Replies View RelatedI am setting up a new computer with Windows 8.1. I have added a 6TB second drive to the system that I am putting my Files on. I want only the Admin username to have access to this drive and block other users (other users are my kids).
Is blocking other users as simple as going to the security tab and remove "Users(XXUsers)" and just leave Authenticated Users, System, and Administrators? Should I add in this admin username too?
I just want to block an app from being able to access the internet. I want the app to be able to communicate to my private home network, but not access the internet. How can I do this? How can I make sure that the app can't contact the internet?
View 1 Replies View RelatedI am running a Win 7 OS on an SSD and I have some programs installed on a different hard drive. And I want to move this program files folder on the same hard drive but different partition. Is it possible to do this without breaking the program links?
View 9 Replies View RelatedI have my default Windows firewall option set to block all outgoing connections. What are the applications that I need to allow in order for the tiles on the start menu like weather, news, etc to work?
View 3 Replies View RelatedI can't RDP from my host to my VM in Hyper-V,I'm running Windows 8.1 Pro. I have enhanced session mode enabled,all integration services running,I'm allowing RDP connections in System Properties,RDP is allowed through Windows Firewall,and I can ping the VM from my host.
View 3 Replies View RelatedI have problems when i won't to edit host in C:WindowsSystem32driversetc
When I won't to edit this before i just fine i just copy and paste from desktop to edit this. But i try to copy from desktop to host folder in C:WindowsSystem32driversetc
I just error for "You need permission to perform this action" to do this and option only "Try Again" and "Cancel"
And I try to edit with notepad and notepad++ "Run as Administrator" I got I can't save no matter what i do in file.
Notepad say "Access is Denied". Notepad++ say "Please check if this file is open in another program"
I'm the only one using this laptop and i try to restart my laptop and try to open its is not work.
Lately, I have been experiencing a slowdown on my computer. As any other person would do, I opened Task Manager and saw that a process called WMI Provider Host took 20-30%, of CPU. I tried to end the task but it continued to open up. I went into my anti-virus software and found nothing wrong. I looked into my Event Manager and got back to a .dll opening the script making WMI Provider Host open. the .dll is called cimwin.dll. That opens it and other Activity Transfers open it.
View 2 Replies View RelatedI'm at the point of no return with Hyper V. I have finally gotten access to the Internet. For the next step, where I can find Step-by-Step instructions to gain access to a Host Hard Drive from the VM. I have the MS Windows 8 Inside Out and it is of no luck. For some reason accessing a Hard Drive wasn't important.
View 1 Replies View RelatedI have done installation of windows xp sp3 on a guest virtual machine and i have problem with networking. On my host machine (windows 8.1 ) i have 1 static ip and i can't have anotherone. So from this ip i have to share network to guest machine. The guest machine tries to get ip from dhcp but it can't. When i give it manual ip address (the ip from host computer) it works ok but i have to turn off host's network card because they cant have tha same ip address.
View 6 Replies View RelatedWhen I go to shut down a screen comes up Task host manager comes up, I then have to go down and click on shut down anyways. It just started for me with latest updates. Running Windows 8.1.
View 6 Replies View RelatedI am having the same problem from here: [URL]
But now 10 years later on windows 8.1 ....
As I am having problems with USB and getting my workfiles onto my guest machine I thought I could load them onto my host then access them via file sharing. I have set up the VMware player with the location of a shared directory on the host but I cannot see that on my guest XP desktop. The steps I need to do to get this working. So far I am having no end of problems getting this new laptop to work with my old software. Using Windows 8 Pro 64 bit on host and Windows XP Pro
View 3 Replies View RelatedI accidentally set "Windows Presentation Foundation Host" to default open in Google Chrome, I don't know why I did. I was experimenting, I guess. I don't know how to fix it.
Windows Presentation Foundation Host is an XAML file. I don't know a whole lot about how computers and their files work, but I know a little like how to navigate with task manager, file explorer, control panel, etc.
If say I have a Windows Guest running its own AV software whether it's Windows defender or anything else then it seems to me that by having the HOST also running an AV software we are going to have two pieces of AV software running on the same data areas (the VM Disks).
It would seem to make sense to exclude the VM directories from the HOST's AV scan when the VM's are running -- but I haven't seen any mechanism to dynamically turn off parts of the AV system -- it's either an ALL or NONE mechanism.
I'm sure the performance of both HOST and GUESTS could be enhanced if AV software was ONLY running on the machines it needed to be - but AV software doesn't seem to allow for excluding certain parts of the machines.
If I have up and running say 4 VM's - that's my normal usage - then on the Virtual Machine directory on the Host I could have 5 (yes FIVE) AV pieces of software scanning / protecting it (The VM directories / data areas) at all times -- The VM's of course need to be individually protected if they are on the Net.
I keep getting this message of late not too sure what it means or what it is "scripted diagnostics native host has stopped working". It pops up with an option for me to close the program & windows will look for a solution next time Im online but its still there & keeps popping up?
View 2 Replies View RelatedMachine : Lenovo C5
OS: Windows 8.1
For the past couple of days when booting my system up I have been getting the Windows script host error shown in the picture, I tried to search the Lenovo site but there really is no support there. What this error may be and how to correct it?
I have recently discovered that my laptop cooler was going crazy and I didn't knew why, then I started Task Manager and there it was "Windows host process (Rundll32) eating 30% of the cpu.
Notebook specs:
Cpu: Intel Core i5 3210m
Ram: 8gb ddr3 1600mhz
OS: Windows 8.1 x64 pro with the latest update
downloaded some software on laptop which required to disconnect from the internet and run a script and I noticed that this turned off the virus checker / firewall etc. I decided I would insert the Windows 8 recovery disk and start again, however as the hard drive is partitioned this has only wiped c: and left everything on the d: drive. How can I start again so nothing remains in my laptop.
View 2 Replies View RelatedMy computer takes 2-3 hours to start up !
this problem appeared after I restarted my PC, because I'm always keep my PC open for one week or more..
Then, after I saw like this.. I formatted my PC and it is look like good!
but after I restarted again, before startup, it's always doing => CHECKING FOR ALL DRIVES ERRORS After Windows start , also asking me "from notification area" to Restart my PC to check drives errors..
And now its back again to take 2 hours, without checking.