Network / Sharing :: Get Win 8.1 Update1 Desktop PC To Show ALL Nearby Hotspots
Jul 29, 2014
Windows used to show all nearby WiFi hotspots in the same way that my phone does. You could also "rescan" to do a better job of seeing weak ones.
I don't know how to do this on my Win 8.1 Update1 desktop PC.
It just seems to show my own 2 connections and not all the 10 or so I see on my phone. I left click on the bar graph in the N.A. - a blue bar pops out from the right but it does not show all the nearby connections.
What algorithm is it using to make this selection? How can I control that? Do I have to buy an "app" or a program?
I have a fresh install of Windows 8 on my desktop computer. However I've run into some major issues with accessing my NAS (Media Server/Hard Drive)
#1 - I cannot for the life of me map my NAS as a network drive anymore.
#2 - This the important one, I can't see over 80% of the files stored on my NAS, only the most recently updated ones. I can see them just fine from my brothers laptop that came preinstalled with Windows 8, and no issues whatsoever with other computers on the networks on Win 7. Is this an issue with fresh installs? If so how can I remedy this?
My fully updated Windows 8.1 notebook suddenly will not show any wifi connections when I click on the icon in the system tray (it shows "No Connections are Available", although it is connected, and I can surf and browse normally).
To connect to a new network, I have to manually enter the details of the network, and then it connects. This is something new, since previously it would show all the available networks, and allow me to make a selection (which is normal). What setting could have flipped do enable the above situation?
I live in an apt building that has freeWIFI. There are about 4 wifi connections Ican switch to when one is lagging. I would like to see the number of usersaccessing each connections.
Is there any freeware system monitoring tool available that will show me #number of users on each wifi connected in my building. I am running Win 8.
I'm a Windows 8. I'm trying to RDP from my new Windows 8 laptop to an XP desktop, both of which are on my home network. When I try, I get the below error...
Remote Desktop can't connect to the remote computer for one of these reasons:
1) Remote access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network
As best as I can tell, none of the conditions above is true. Here is what I have looked at so far...
- On the XP machine, in System settings / Remote, "Allow users to connect to this system" is Checked. I have successfully RDP'd to this machine in the past, but this is the first time I've tried from the Windows 8 machine.
- From the Windows 8 machine, I can ping the XP machine, and I can access a shared drive on the XP machine. In fact, I've been moving files between the XP machine and the Windows 8 machine, in both directions, all day.
- Just to eliminate another potential issue, I have set the username and password on the Windows 8 machine to match that on the XP machine.
Incidentally, XP machine is running XP Pro, 2002, SP3.
Strange behavior on my Win 8.1 desktop with a shortcut to Control PanelNetwork ConnectionsEthernet Network. After a system startup, (as administrator) the shortcut can "Disable" the network connection by right clicking the shortcut and selecting "Disable". Later, when the shortcut is right clicked again, the context menu still says "Disable". I would call this a failure to update the shortcut, but what is actually happening.
In order to get the shortcut to "update" itself, I have only to open the Control PanelNetwork Connections window. Magically, the shortcut will then reflect the true state of the network when right clicking the shortcut on the desktop.
Been having trouble this morning with my network drive in my Home Server. It normally connects fine at startup and it all of a sudden wont work.
I have isolated it to my Desktop as i can connect off of my Laptop fine.
The name of my server is Homeserver(192.168.1.77) and I have shared a folder inside the drive rather than the drive its self. This image shows how I'm trying to connect to the folder. And this is the error I'm getting
I have tried: Resetting ip / dns flushing etc. sfc /scannow (Says everything is fine.) Windows 8.1: files in folders on network drive not visible W2K3 Server can access W8 W8 computer cant see W2K server Also tried disabling norton on my desktop but still wont work
Ive installed Update 1 on two of my three desktop PCs but on my main PC, it's not showing up in the MS Update window. I tried installing it manually via: Download Windows 8.1 Update for x64-based Systems (KB2919355) from Official Microsoft Download Center But it says this cant be installed on that PC.
Potential client running Windows 8.0 (trying to avoid 8.1) Pavilion g6
Potential host running Win7 pro (fully updated) and the same desktop is the host of the wifi I'm using.
So far working: -Remote desktop from Windows 8 into win7 (wireless). -Folder sharing both ways (no homegroup, but direct sharing) (wireless).
Allthough, while uploading from Win7 into Windows 8 it occassionally looses connection, failing upload. However downloading same files from Windows 8 using same network works flawless. Also again using win7 sometimes doesn't find folders until using premade shortcuts. Maybe relevant, or not.
Problem: While trying to use Remote Desktop from Win7 desktop into Windows 8 Pavilion laptop I get that "...one of these reasons" error.
This while rightclicking on the Windows 8 pc in the win7 view of the network (choosing remote desktop option), so I know that the name is spelled right, it's in the network!!!
So far tried: Setting up Windows 8 to receive remote desktop as given here in these forums, allthough while on SystemProperties-->Remote-->Advanced I do NOT get the remote desktop menu view, only Remote Assistant settings with hour setup and such.
Tried to connect: -Both firewalls down, also client Avast down. -From the network with right mouse click. -Manually inputting the computer name into Remote Desktop
These PC's are not on the same WIFI, only same network. I Don't know how to get the network host into it's own wifi network. For example, I can't get my iPhone to connect wireless into iTunes because they are not connected into the same wifi, only Windows 8 is "connected" in the wifi, win7 is "merely" sending it, at least that's how I've understood the problem why I must upload/download stuff with manual wire connection with my phone.
I recently bought Dell Inspiron with i5 4th generation and preloaded Win 8 on it.
I upgraded it to Win 8.1. Am trying to login to my works station through IE11. am able to successfully login to web vpn website and when i try to give my IP and hit submit,
Java tries to load for a brief moment and am getting a message.
Error: click here for more details in a split window.
However am able to launch remote desktop using IE8 from my XP box. IE11 does not support.
1) make remote desktop work on IE11 or 2) in installing IE8 on Win 8.1
Stuff tried so for, for making it work:
-uninstalled IE11 and tried installing IE8 (failed) IE9 (it says already installed though it is not) -tried developer tool and changed browser mode to IE8 ( internet stopped working- unable to load any page from internet.)
I want to be able to remote control my moms PC. Both our PC's are Windows 8 pro. I used a pro android app called jump remote desktop from my android tablet which allowed me to control my moms PC but it logged her out of her PC so she got a blank display while I controlled it. If I use the integrated Windows 8 pro remote desktop would my mom also be logged out and get a blank screen? How about the chrome web browser remote desktop extension? Am I right this is the only way that I can control her PC while she can still see what I'm doing. Does chrome extension log her out of windows? Another problem with having her log out of windows is then the next time she turns on her PC she will be asked for windows password even though we have it setup to start windows without asking for sign in info. Is chrome extension best solution for me? Easy to setup?
The desktopUI all my software can connect fine to the internets, browsers, emaiclients, games etc etc. On the MetroUI nothing connects to the internet. for example with the windows app store i get the message (roughly translated from Dutch) "Windows store didn't connect to server or timed out, wait a few minutes and try again" clicking the back button top right, or the try again "link" have no response whatsoever.
dxdiag log
Code: ------------------System Information------------------Time of this report: 5/11/2013, 18:28:38 Machine name: WOLFDEN-HQ Operating System: Windows 8 64-bit (6.2, Build 9200) (9200.win8_gdr.130306-1502) Language: Dutch (Regional Setting: Dutch) System Manufacturer: MEDION System Model: MS-7797
I have a Windows 8 laptop. Windows 8 came pre-installed means it is Windows 8 Core/ OEM version, if that matters.
my other two laptops are Windows 7 laptop and Macbook Pro plus android handset.
sometimes all the three laptops are ON and operational and are connected through WiFi.
I have Remote Desktop Sharing enabled in my Windows 7 laptop I have installed third party RDP server in my Macbook Pro I have enabled Remote Desktop Sharing in Windows 8 laptop
Chart below shows kind of working sketch
Client Device Server Device Result Windows 8 Laptop Windows 7 Laptop OK Macbook Pro Windows 7 Laptop OK Android Handset Third Party RDP Client Windows 7 Laptop OK Windows 7 Laptop Macbook Pro Third Party RDP Server OK Windows 8 Laptop Macbook Pro Third Party RDP Server OK Android Handset Third Party RDP Client Macbook Pro Third Party RDP Server OK Windows 7 Laptop Windows 8 Laptop No Responce Macbook Pro Windows 8 Laptop No Responce Android Handset Third Party RDP Client Windows 8 Laptop No Responce I tried using both IP and netBIOS name. Ping works just fine in both ways.
Now, One thing is clear. something is wrong in Windows 8 settings or something.
assuming that Remote Support is allowed in here... is there something I am missing in Windows 8 configuration?
I am running windows 8 pro, I have the "alow remote access" checked as I should and I have read plenty of threads on how to do it. Now, when I am at work, I want to remote into my home desktop. My work pc is win 7 pro. When I enter my home ip it gives the "cannot connect" either the computer is this or that etc.
I followed the guide but to no avail. AS long as my home pc is set to accept remote connections, why am I having this issue.?
Want my Windows 8.1 computer to join my HomeGroup which currently consists of my Win 7 desktop and Win 7 laptop.
In Network and Sharing Center it sees the HomeGroup and says "Available to Join". I try to join by inputting the password and after a minute it says "Windows no longer detects a homegroup on this network...."
Why is this happening? What to do? What is the point of having multiple computers if you can't join them.
I also see that I can't even access the other computer through network. It shows both computers yet when I click on one it says its not accessible, I don't have permissions, etc. I have done nothing to change anything. Why can't I see other computers on my own network? On my two Win 7 computers it was as simple as could be. Why is this Win 8.1 giving me trouble?
I had a PC running Windows 7 Pro with SP1, in a remote location, that I would wake up using WOL and then operate using Remote Desktop. At the conclusion of the session I would shut down the pc until I needed it again. I upgraded that PC and now find that WOL using Windows 8.1 will only work if the PC is in the Hibernate mode. That's fine but I can't find a way to put it in Hibernate using Remote Desktop. While using Remote Desktop my choices are limited to Disconnect and Sign out. There is no command line command to put the Windows 8.1 pc in hibernate mode.
How I can put the remote Windows 8.1 pc into hibernate at the end of a remote desktop session so I can restart it with WOL when needed again?
I am trying to write a DVD over RDP but my writer is not recognised. After searching the internet, I found out that Windows disallows this as a security precaution. I did find a fix for Windows 7, which is to go into GPedit.msc and change the setting for 'All Removable Storage: Allow direct access in remote sessions' to enabled. However, this setting is not there in Windows 8. Has it been removed for Windows 8 and if so is there another fix.
Win 8.1 desktop computer has airplane mode on and grayed out. There is no control switch on the PC or the wireless card. I have tried everything I see on line and nothing works. How do I shut off airplane mode?
I've been looking for a PC that I can use to simply connect to another computer on the LAN with remote desktop. Nothing else at all, just remote desktop.
I found this one, and I was wondering if it would be any good: HP 110-101 Desktop PC and 20? Monitor Bundle | Officeworks
Trying to get Remote Desktop access functioning on my new win 8 pro PC. I have closed firewalls/virus protection etc, I have enabled remote access anywhere and everywhere. I assume port 3389 is okay as I can remote connect with my win7/xp/win 8 pro laptop to many other PC's over the internet. I can connect to the said PC over the local lan using the name convention but not over internet address 110.143.xxx.x
Never thought it would be this hard after so easily using xp and win 7. otherwise win 8 pro is out the door!
I have tried to find older topics and tutorials on this without success. This is new to me so hopefully there's something very simple to address the issue.
I have 3 computers. 1 x Win 8 Pro and 2 x Win 8 Standard.
I know only the Win 8 Pro machine can be a Remote Desktop host.
In System Properties I have checked the box to "allow Remote Assistance to this computer" (I don't know detail, but I am aware this is something different to Remote Desktop).
Also in System Properties, I have selected to "Allow remote connections to this computer". I have also tried to check the sub-section of that "Allow connections only from computers running Remote Desktop with Network Level Authentication (recommended)".
All computers are set up at home, connected to a regular home router.
When I try to connect to the host machine I get an error (I don't have details of that right now, but its some generic "no connection" error).
I have installed Windows 8 RP, and everything works fine, except I cannot access internet from metro apps: IE, Store, New, Mail etc. Does not access internet, even though I have access to internet from Desktop? I have tried everything, and googled for hours without any useful result.
I did NOT create a restore point before doing the upgrade.
About a week ago, I updated my Windows 8 laptop (a year-old Lenovo Ideapad) to Windows 8.1. At first, it appeared that the upgrade went flawlessly. After a couple of hours though, the crack started showing. I found two issues:
1. I could connect to the internet after a reboot, but if I didn't ACTIVELY continue working on the internet, the connection would die. The only way that I could get it to 'resume' was to reboot. I was using a wireless connection. Tried a wired connection with the same issue. No other machine on the network were experiencing the issue.
2. I use Remote Desktop EXTENSIVELY to connect to client machines. All connections work EXCEPT for one which uses an RD Gateway within the connection. That connection will appear to start connecting after I enter the credentials, then simply close. No error. No message. The RDP connection simply closes. I tried building the connection again from scratch. Same issue.
3. Meanwhile, I noticed that my email (via Outlook 2010) never stopped...THAT part of the internet connection remains 'solid'. Very odd.
No matter what troubleshooting I did, I couldn't solve the problem. So, I decided to see if it was Windows 8.1 or my machine.
I went out an purchased (albeit probably temporarily) a brand new Toshiba Satellite (L55-A5284) with Windows 8.1 ALREADY INSTALLED. No upgrade required. I turned on the machine, and did NOTHING ELSE, but create a Remote Desktop connection to my client. I was able to connect instantly. YEAH! Must be MY upgrade on the Lenovo, not Windows 8.1.
Then, things get REALLY weird (or weirder). I signed off of the client site (I mean, after all, I'd proven that it was my old machine and NOT Windows 8.1, hadn't I?). Almost as soon as I'd signed off and shut the computer off, I realized that I needed something from the client machine. Since it will take me a while to restore my Lenovo, I figured that I'd get work taken care of first, and went to turn on and use the new laptop (Toshiba). Well, imagine my surprise when I could NOT CONNECT again via RDP on the new Toshiba with nothing additional installed on it except for the Remote Desktop connection.
I had let the system update Windows when I shut down and figured that it must be the update that was just installed, so I restored the machine back to factory (I mean why not...I had only created one Remote Desktop connection on the machine). After the restore THE CONNECTION WORKED AGAIN. Sign on, check. Sign off, check. Sign on again, NOPE. Restore computer (again), Sign on, check. Sign off, check. Sign on again, NOPE. So, while I am far from being a hardware specialist, it seems to me that something isn't 'releasing' when I sign off. EVEN A REBOOT (hard or restart) doesn't work. The only thing which solves the issue is a RESTORE - either the kind that saves your files or the one that resets to factory...either one 'resets' the connection, so that I can get on again ONE TIME.
I'm guessing that whatever's the issue with the new laptop (Toshiba) is also causing the internet instability AND the RDP problem on the old laptop (Lenovo).
Since I installed some "critical" updates from microsoft, there have been some network problems. The main problem that I noticed was that the ethernet appeared as "limited". Then, as I logged in, internet was actually working fine, but that was in desktop mode. Now, as I try to run an app from start screen, it said that there was no internet connection...
So I went to troubleshoot the problem but nothing was found. The other thing I noticed was that, by opening the "Network and Sharing center", there appeared something unusual:
I also booted up to safe mode with network to see if it still persisted, and it still continued limited and while opening the network and sharing center, it still showed that thing on the image.
All this happened just after installing and restarting for the new update, and so, I also tried to restore the system to the point before the update, but it was proven to be unsuccessful, in the end appearing a message saying that it must have not been successful because of the antivirus being enabled at the time (I doubt it), or because of an unknown error.
Just got a brand-new desktop. Unfortunately, I will not be able to use an ethernet cable BUT I have a USB network adapter. I know for sure that it works (I've used it on my laptop). The network adapter seems to have installed properly; I am able to pull up "Available Networks". However, when I try to connect to my home Wi-Fi and put in my password, it always says "connecting to the network is taking longer than usual" and then never connects. Multiple other devices in the house (smartphones, laptops, desktops) are all connecting to our network with no problems.
I've tried all of the Windows troubleshooters and wizards --- didn't work.
I've tried changing the wireless network channel from 6 to 8 --- didn't work.
I've tried netsh winsock reset catalog and netsh int ip reset reset.log hit in the command prompt --- didn't work.
It now shows that it has "limited" connection...but I cannot pull anything up in the browser. What the troubleshooter is telling me now is: "Wi-Fi does not have a valid IP configuration".
I recently did a clean install of a full version of Windows 8 on my computer. Some of my Apps on the start screen, ie Weather, News, Maps, Travel, Skydrive and other Apps such as Slacker Radio and Weather Radar Pro will open but give me a "no connection to the internet" message. If I switch over to my Desktop I have an internet connection.
I checked the charm bar/settings/Internet Access and it says "no connections available". The curious thing is the Live Tiles for the News and Travel will update and show the latest information, yet when I open them I get the "no connection available" message. I have no problem with the Store App, Explorer, Email or Music App. Those seem to work fine.
I removed my Anti-virus software, re-installed the Apps and still get the same results. For my internet connection I'm using a Virgin Mobile OverDrivePro2E7 WiFi Hub. I'm not using the Wifi, it is plugged directly into my computer via a USB port. If I go into Control Panel/Network Connections it shows up as EtherNet2 with a strong connection.
