Maintenance :: EaseUS ToDo Backup Free 6.1 Disk Not Boot From USB?
Dec 17, 2013
EaseUS ToDo Backup Free 6.1 emergency disk won't boot from USB.
That's the long and the short of it. I changed the boot priority in BIOS to boot the USB first. I got it to read the USB key one time when plugged into the USB 2.0 port. While the busy circles were twirling I got a "please wait." Then I got a command prompt flicker, then a screen from Windows saying it did not boot properly.
So I turned off Secure Boot. Made the USB boot stick over again. Now I get nada no matter what. I hold down the power button to shut down. When I power back up it just goes to the regular logon screen.
I was hoping to be able to boot off the stick to avoid buying a 5 pack of CDR just to burn one disc. At least for now to have my system backed up.
View 9 Replies
ADVERTISEMENT
Aug 11, 2013
how to use it but my problem is when i shrink my C drive and extend it to D drive, my laptop restarts to EaseUS boot mode. when it is around 90% of loading my laptop went to hibernate and when i turn it on again, the EaseUS boot mode says it completed its processing, or whatever it is. i'm afraid that it will harm my hard drive that i didn't see it to complete, will it?
View 2 Replies
View Related
Mar 3, 2013
One of my favorite features of Windows Explorer was that it told me the free disk space in the status bar. Since Windows Vista, you also had the ability to see the free space on hard drives across the network.
Now in Windows 8 you can't even in the least see the free space on the status bar of your own pc, let alone those across the network, and for someone who's constantly moving files across my home network, it's becoming a bit of a hassle.
I don't think there's away to to restore this functionality (already installed the ClassicShell program) so absent of that, is there a free disk space monitoring tool recommended? I'm mainly looking for one that has a system tray function that can tell me the amount of free space I have left, either in percentage form, or megabyte form, or gigabyte form, whatever.
View 7 Replies
View Related
Mar 14, 2013
I installed Windows 8 Pro on a GPT partition. I have 234GB of SSD with 87% free space according to Disk Management. I am trying to create a 4GB primary partition for Intel Rapid Start but the Disk Part shows i have no space available in that drive and would not let me create the partition. Why would that be?
View 1 Replies
View Related
Feb 15, 2014
I have Windows 8.1 PC, then i installed EaseUS Partition Master 9.3 (All Editions), So i am having seperate ISO of WinPE, so i like to know "How to install WinPE on PC" because i want to Create EASEUS 3.9.0 Bootable CD.
I am having all the files like this below.
1)--EASEUS Partition Master 3.9.0
2)--WinPE ISO image ( in this iso there is no SETUP file is there, so how i should install this WinPE) If i install WinPE then i am able to create EASEUS Bootable CD.
View 9 Replies
View Related
Jun 18, 2013
How can you read what files were backed up to a backup disk?
View 5 Replies
View Related
Aug 12, 2013
Since a week is it impossible to make a Win7 Backup Image (Control Panel).
This is the feature that got removed in 8.1 but now (on 8) I'm still using it in case I need to restore the OS.
The message shows this:
"Not enough disk space" but I have 360GB free on one disk and 150GB on another. The image is calculated at 67GB and it worked each time until now.
All OS updates installed.
View 9 Replies
View Related
Jan 1, 2014
I am having trouble with a message in Action Center in Windows 8.1. It is saying "Check Backup Disk Space" and I cannot hide the message. I had Windows 7 File Recovery setup with Windows 8.1, but now after the upgrade, the message is "stuck." Can this be fixed? These two links explain it perfectly:
Windows 8.1 Update - Check backup disk space - Microsoft Community
Windows 8.1, can't remove "Check backup disk space" error in action center -
View 2 Replies
View Related
Mar 30, 2014
I'm having a problem trying to restore Win 8.1 after a crash. All I get is a blue screen with an error code.
I finally deduced that I was having a hardware problem with my beloved SSD (weird glitches and erratic behavior, occasional recognition errors in BIOS, and finally I/O errors when trying to restore from backup), so I pulled it out, and temporarily replaced it with a spare HDD of slightly larger size. The backup/restore program I use is Paragon, and it has worked flawlessly for me for some time, including when I migrated Win 8.0 to that SSD over a year ago. So I pulled up the last full-disk backup (from 4 weeks ago) and did a Restore to the replacement HDD, but the resulting installation will not boot. I've tried it several times, including using a different archive, and each time I get a blue screen saying "Your PC needs to be repaired", with an error code 0xc0000034.
What is this error code, and how do I go about fixing the problem? Is there some kind of issue with restoring an SSD backup to an HDD? (I know there is something about the partition alignment which may be different, for instance.) This program worked just fine in the opposite direction, meaning restoring a backup of an HDD to the SSD.
I might have been able to use the recovery media to fix the problem, if I had the current media... unfortunately, the disk I created was from prior to the 8.1 upgrade, and it won't work anymore. My mistake. But short of a clean install back to 8.0, and then another upgrade to 8.1.
View 9 Replies
View Related
Oct 21, 2013
Windows 8.1 64 bit pc48 GB RamIntel i7 - 3960X CPUBoxxTech ComputerDrive C: SSD - 446 GB
When I first got my new personal computer in January, I created a System Image using Microsoft's utility. I typically use Acronis for my backups, but after major changes, I use both Microsoft and Acronis.
Now, I am attempting to complete a System Image Backup using Microsoft's utility so that I can fix my SecureBoot concern, knowing that I have a safety net in place. Unfortunately, I am unable to complete a backup. BoxxTech suggests that I use Microsoft's utility.
I begin with the File History in the Control Panel as shown below. Note, that I have plenty of room on my FreeAgent F Drive (standalone USB drive). Yet, Microsoft's utility believes otherwise.
Only the three items that shown to be selected are selected. In other words, there are no other drives or partitions off-screen that are selected.
Thinking that it might be a problem with my external USB hard drive, I look at using one of my internal drives, T.
I get the same error message as shown earlier.
why I am unable to back-up my personal computer using Windows 8.1?
View 9 Replies
View Related
Aug 5, 2013
I have been using Syncback SE Free for a long time now with Win7. It works well. I like the mirror function and the ability for syncback to detect small changes and allows you to view different files. When I use the mirror function in syncback, it scans the drive/folder and only copy/delete the differences leaving the rest of the files intact.
I have one main PC as my work pc, and I rotate between 2 different PC's (win 7 pro laptop and win 8 pro desktop). So I like all files on each pc to be current. Think of it as dropbox but offline with tons of data. Currently I have an external hd which I use as an intermediary between the "current" pc and the "older" pc.
After I upgraded to win 8 pro, I noticed that I can do a complete backup with syncback, but I cannot use the mirror function. Syncback does not work in deleting files either from source or target hard disk. It can detect the file changes, but unless I delete the file at the target drive, it will not copy to the target drive.
Any mirroring software which can replace syncback free which works for windows 8 pro desktop and my windows 7 pro laptop? I have tried contacting the people behind syncback (2brightsparks), and they have a knowledge based which does not tell much. It seems that windows is getting stingy with the read/write options. Following the KB discussion on syncback yields nothing in fact it is too convoluted.
I don't mind if it is a network/ethernet solution (not online storage like dropbox-but using ethernet wires) or my solution which is using an external hd as long as all my work computers are "current".
View 2 Replies
View Related
Mar 4, 2013
Since a couple of weeks, Windows has started scanning my disk on every boot. It does 1%, 2%, then sits for a while before it jumps to 9%. Then it works itself up to 43%, where it sits for a long while before jumping to 100%. Every time. I'm not having any problems with the system, and I'm not missing any files as far as I know. Why is it doing this and how can I get rid of it?
View 1 Replies
View Related
Jan 17, 2014
I'm evaluating a windows 8 gateway. it is unable to boot. automatic repair doesn't work, no go on refresh, there is no media for re-install. no restore points. just to see, I am checking out what diskpart says. disk 0 online, size-0, free-o bytes. the pc had been dropped. I reseated the hard drive to rule that out. is this drive dead? disk 1 is 14gb, but I'm thinking that the 16 gb flash drive that is plugged into it.
View 2 Replies
View Related
Feb 15, 2014
I have a Toshiba Laptop Satellite L875D-S7332 Part No. PSKFQU-008003 With Windows 8 x64 Preinstalled. I created a Startup Repair Disk with a DVD. My problem is i cannot boot from this DVD. I changed the Bios to boot from DVD but it still doesn't work!
View 1 Replies
View Related
Oct 28, 2013
I have a question about Macrium Reflect Free, and dual boot...
I have two installations of Windows 8 (and Windows 8.1), on two separate SSDs. Let's call one SYSTEM1, and the other one SYSTEM2.
Let's say I have booted inside the SYSTEM1 Windows installation. Now I want to backup SYSTEM2, with Macrium Reflect Free. I load Macrium Reflect and select all available partitions on the SYSTEM2 disk (which are just two, the main one and a system-reserved one).
By doing like this, will also the MBR (Master Boot Record) of SYSTEM2 get copied inside the Macrium image-backup? In other words, will Macrium Reflect always copy the master boot record (if available), even if the selected drive is not the one from which Windows is currently running?
Or will the MBR get copied just with the option "create an image of the partition(s) required to backup and restore Windows"? Probably not.
I'm interest about this because it would be useful to do a backup of the MBR (together with the partitions), in case a virus infects it.
View 6 Replies
View Related
May 18, 2014
I"ve installed windows 8.1 from fresh on a seperate parition on my macbook pro retina 2013 via Apple's bootcamp.
I allocated 40GB which when formatted is 37GB
But now I'm downloading Call of duty on steam which is 14GB however on my hard drive apparently I've only got 5GB left..
Is there a way to free up space or to see what on earth is taking up soo much space..
Ideally I want to buy Battlefield 4 on origin soon but that needs 30 GB space, obviously I'll delete the call of duty game but how can I get all my space back.
View 5 Replies
View Related
Feb 23, 2013
I have 8 GB machine, 64 bit Windows 8 pro.
Windows 8 instantly uses up 45% after cold boot. There are some startup I know, but when added together there's no way they're taking up that so much space in RAM.
View 3 Replies
View Related
Jun 4, 2014
It seems that Windows 8.1 Pro's scheduled defrag is consolidating free space, which is taking forever on one of my 2 TB data drives, which has about 300 GB free space. I stopped it at about 9%, and dfrgui immediately showed it as "OK (0% fragmented)". Clicking its Optimize button resulted in the defrag phase completing almost immediately, but then it was back to consolidating free space, starting at 5% this time. According to Task Manager, it's read/writing about 40 MB/sec, and the Active Time is over 90%. I really don't want this to go on for hours and hours and potentially repeat itself during future scheduled scans. Is it possible to alter this behavior, or should I just disable the weekly defrag task?
View 7 Replies
View Related
Mar 21, 2014
I recently installed a new ssd and did a fresh install of windows 8.1 on it. I am now using my old hdd as my main data drive in my laptop caddy. My problem is I did not back up my data on my hdd and format it. So I need to delete the "windows" , "program files" and "program files (x86) " folders from that hdd to free up some space.
I understand I have to give ownership to those folders for me to be able to do delete the folders. I have tired the methods suggested by this guide Take Ownership of a File, Folder, Drive, or Registry Key in Windows 8 I tried both of those commands
(To grant currently logged on user ownership of) takeown /F "full path of folder or drive" /R /D Y (To grant administrators group ownership of) takeown /F "full path of folder or drive" /A /R /D Y and it was succesful, however I still couldn't delete the folders.
View 2 Replies
View Related
Oct 26, 2012
i want to back windows 8 to disk and the software on the computer wont let me so how to use them.
View 5 Replies
View Related
Dec 27, 2012
My son received a new HP laptop for Christmas, it is running windows 8. He changed his windows password and doesn't remember what it is. I never got the time to make recovery disks... Is there any way to reset the password? I tried downloading some windows password unlocker on my laptop, but couldn't ever get it to boot from the usb on his laptop.
View 9 Replies
View Related
Sep 15, 2014
Is any chance to unlock my computer ? I dont believe Will hirens boot cd and change password work here. Is any tool availble or some trick ?
View 3 Replies
View Related
Jun 18, 2014
on my computer with windows 8 format as I am. Dvd format to format I've installed disk, but I erased or something during the installation, format the error output. The computer BEGAN to GIVE the following ERROR :
GIVEN WARNING
Error: no boot disk has been detected or the disk has failed.
</b>
<img class="decoded" alt="http://i.hizliresim.com/W2jNzN.jpg" src="http://i.hizliresim.com/W2jNzN.jpg" />
View 1 Replies
View Related
Aug 24, 2014
For the first time, I decided to back up my C: Drive using the Windows back up image tool. I selected my internal D: drive as the storage target. The recovery tool ran, and ran, and ran. The "back up" portion of the event had finished, but the "create shadow copy" went on for a good hour before I aborted the activity. The tool window never closed. After a while I hit the "x" button, but the window remained open. I clicked the shutdown icon and selected "restart", the restarting screen came up and remained for another hour or so before I cut the power to my pc.
Immediate problem: Now, my PC won't boot up. It gets to the windows 8 icon and the spinning dots never stop circling each other.
Attempted remedies: If I disconnect the SATA cable to my D: drive, the pc boots up. I can then connect the D: drive as an external and it will load. I deleted the back up image folder and the .dat file that was created on it. These are the only 2 files I could see created around the time of the back up, with "show hidden files" enabled. However if I reconnect the drive as an internal, my PC still won't boot. I have tried reverting to an older system restore point, but this has not affected whatever is going on during bootup.
What has Windows Back Up image Tool changed that won't allow my D: drive to be connected during boot? How can I remedy this?
Probably unnecessary background info: Last week I decided to clean up my computer, do a fresh install of windows and create a back up so that I *hopefully* never have to clean from scratch again. I had to start by installing windows 7 from DVD. I kept nothing on my 60gb SSD C: drive. Fresh install. Run windows update, then upgrade to Window 8 via a code I got from the "buy win 7 computer and purchase win 8 upgrade for $17" promotion when win 8 first came out. I ran win update again, which bricked my pc with a corrupt update sending it into a continuous loop of "update failed, reverting to old settings" over and over. I reinstalled Win 8 and tried selecting different updates. After 8 or so selections, the list of 72 "required" updates disappeared, and I could finally upgrade to 8.1 After 3 days of these install shenanigans, and finally getting my personal necessity programs installed (chrome, photoshop, etc) I was ready to create a windows back up image. This brings me to the current scenario.
my D: drive is a 1TB MyBook HDD that I took apart and plugged in as an internal. 16 gb of ram, 3.8- 6core AMD processor.
View 9 Replies
View Related
Jul 22, 2014
If I add a SSD (Crucial MX100 CT256MX100SSD1 2.5" 256GB SATA III MLC Internal Solid State Drive). Can I use it as the boot drive as well as the backup drive? Then use the existing 1TB HDD as the main storage drive. I need a backup drive so I figure if this works then it could give me a performance boost as well. How could this best be done to satisfy both needs? Would I put all the programs on the SSD and all the data on the HDD? My current drive is at 119GB used space. How do I determine how much back up space is needed?
View 3 Replies
View Related
Sep 12, 2013
My computer shipped from the factory (Dell) with Windows 7 x64. I recently did a clean ('custom') install of Windows 8 Pro x64. The install went very well, no problems. To install Windows 8, I booted from a USB flash drive.
I actually have two licensed copies of Windows 8. The other copy is on a DVD. To test the functioning of my DVD drive, I tried to boot from the Windows 8 disk. The computer would not boot. My computer had no trouble booting from the USB flash drive version of my Windows 8 installer, obviously, but it won't boot from a disk version of same.
As a further test, I tried to boot my computer from my original factory Windows 7 install disk. The computer successfully booted from this disk.
I therefore concluded that my computer can boot from a disk made with WinPE 3, but it will not boot from a disk made with WinPE 4, even though it will boot from a USB flash drive made with WinPE 4. I tried to boot from other bootable disks made with WinPE 4 - none would boot the computer. Other bootable flash drives made with WinPE 4 have no problem booting my computer.
My computer is partitioned with a MBR and uses a BIOS. I made no changes to my BIOS settings, and unfortunately there will be no more BIOS updates for my computer.
Should I just accept that I cannot boot from disks made with WinPE 4, or is there some way around this? I'm not too broken up about this because, after all, I have no trouble booting from WinPE 4 flash drives. And disks are on the way out, anyway.
View 4 Replies
View Related
Jan 16, 2014
EaseusToDo backup gives me the following error. I use security tab to allow access to everyone and still get this error. Can I run the backup in the built in admin account? I have tried system backup and Disk and Partition backup and get the same error message. This is an hd in an enclosure with a sata connection.
View 9 Replies
View Related
Nov 3, 2013
A week ago or so I had a machine failure. I had all the documents saved. It took me quite a long time to get me up and running on another machine. At the moment I'm interested in finding out if there is a possibility to backup/clone a finished installed system to a usb(bootable) drive.
In case of failure of a machine a bootable usb drive would give the option of continuing the basic work. At least you could instantly communicate with clients and so on till the new machine is installed. My Mac friend uses Superduper. What are the options in Windows 8? What 3party programs would be capable to do that?
View 9 Replies
View Related
Jan 24, 2014
I have a the Dell 15R SE 7520 which came preloaded with windows 8 . Recently I upgraded to windows 8.1 . My questions are -
1. What should I create - a rescue disk or a recovery disk ?
2. If I create a recovery disk, will it recover my windows 8.1(not windows 8) in case my OS gets corrupted .
3. I also couldn't find the product key for my OS. So , If someday I have to repair my laptop using my recovery disk ,it will not stay genuine?
View 7 Replies
View Related
Apr 2, 2013
I initially started a File History backup 6 days ago and when I open File History from the control panel it still says "Files last copied on 'and the original date'. I have set a daily preference for backing up so shouldn't the date change each day? When I click on the "run now" link a line appears saying "File History is saving copies of your files", but after about 10 seconds that line is gone and it goes back to "run now". So, it is not saving copies of my files.
I have a brand new Western Digital 3T My Book external hard drive that has the initial "File History" folder and backup on it, but if it's not going to update/backup and just stays as it, is it isn't going to be very useful.
Why won't it backup even when I click the "run now" link?
View 1 Replies
View Related
Apr 2, 2013
previously i was using windows 7 home basic 64bit OS. My battery used to give an average backup of about 2 hours. But since the time i have installed windows 8,it gives a backup of hardly an hour. I have checked all the settings in the control panel. They are all fine and proper. The fan keeps making a buzzing sound all the time, even when the CPU usage is low. This was not the case earlier. Also, my laptop is getting heated up more compared to before. What shall i do? What steps shall i take?
View 2 Replies
View Related
