I have a problem with my usb root hub after i installed Win 8 from Win7. Only my USB 3.0 don't work anymore... I installed new driver, it detect my WD passport then 2 sec after, nothing anymore and error 19, uninstall then reinstall nothing happen.
I used my usb 2.0, all work great!
MOBO info : Asus P8Z68 deluxe!
ive been having this for ages on my windows 8 acer laptop, randomly my keyboard doesnt work anymore (happend 5months ago) ive been using desktop keyboard since
View 2 Replies View RelatedAfter last "patch-tuesday" my Windows 8.1 don't assign drive letters to hotswaped HDD's and USB keys.
When starting my backupdrive (eSATA), it is now without a drive letter, I can give it one though in disk-management, but before last tuesday, it was given a letter automatic. Same problem when I connect an USB-HDD or an USB-stick.
Is there a way to get back "autoassign of a drive letter"? (don't know the correct word for this function in English).
Windows 8.1. I had an issue with the general user folder name, which was shown as "Alex_000". Although this was a cosmetic issue only, I wanted to change this to "Alex". I successfully managed this by changing about 50 entries in the registry (via regedit).
So fine so good. Now I found out that there are still some leftovers with "Alex_000" in the Windows system, although I have tried to find every bit and peace, where possible:
When I try to open "Add or Remove Programs" in the Metro surface, I get an error message:
Windows cannot find
'C:Usersalex_000...Classic_{a lot of weird chars}.settingscontent-ms'.
Make sure you typed the name correctly, and then try again.
Somewhere in the system, there must still be links with Alex_000 existing. I tried searching the registry, tried a simple search on C: disc - no success.
In other words: Everything works fine - except of starting the apps from the metro surface for "remove software", or "user accounts", and maybe some other system apps, which I haven´t discovered yet. If I do the same from the desktop, no problem - all these apps work well!
So where are the referring links for such system apps within the metro surface stored? Obviously not in the registry... How/where can i find these orphaned links for the said apps in Metro?
After updating to Win 8.1 RTM the Store App doesn't work anymore. Everything else runs fine. After opening the Store App it takes only one or two seconds and the screen get's back to where it was before. The app is still opened, but does the same as soon as it's activated again. Is there a way to reinstall the Store App?
View 9 Replies View RelatedI have a problem whit my new computer on windows 8. Today I turned on the computer, I login, but then, the start menu app's doesn't work anymore! When I wan't to open skype it doesn't work, when I click on desktop it doesn't open.. I need to click on the windows button every time.
I clicked on the windows button, then the app to go to the desktop was clickable, when I was on the desktop, the start menu doesn't appear if I go whit my mouse left under. If I go whit my mouse right, that menu also doesn't appear. Also some programs doesn't open anymore automatically..
The button for the music also doesn't work, I can't turn of the music etc..
,Im running Windows 8.1 Pro and everything app related ran fine.Weather, news etc. got it all configured and setup nicely on my home screen.I dont remember to have done anything substantial to my files, but one day i had to look at this screen:
The apps dont work anymore, opening one of them just shows a blank screen.uninstalling an app works, but while reinstalling i get the error code 0x80070490 and cant reinstall, weather app in this example.Other apps except the default microsoft shipped ones, seem to behave fine.I did wsreset and downloaded that app fix tool, nothing changed.
I have a Inspiron 530S. Installed Windows 8 a few weeks ago and Minecraft will not work. Others say with Windows 8 they had to delete Minecraft and reinstall. Tried this but it gives me an error for the OS and graphics.
View 2 Replies View RelatedI hate it when I double click a file and Windows 8.1 pops up a message saying I have other apps that can handle this extension.
I disabled this notification through GPEDIT.MSC, it works now when I open pics/docs/etc.... but let's say I install another app, for example, when I install Pale Moon Browser,
I hate Windows 8 so much! Even with a start menu replacement, this ticks me off, it's crappy Wireless LAN manager sucks, its performance is less when I benchmarks my SSD
I can go back to 7, but I am trying to fix a few things if I could just to benefit from the UEFI boot mode as for installing 7, I have to enable legacy ROM which is much slower during boot.
Windows update has been really messing with my pc lately. I ran update and when it installed the updates my integrated mouse ended up not working. I rolled back update and installed the updates one by one and the one I ended up not installing was the camera codec pack. Now the problem I am having is that my touchscreen won't work. If I talk to HP support they do the most basic thing they can and then when they can't fix it they tell me that I have to ship it to them because hardware is broken.
View 1 Replies View RelatedI've installed Microsoft Windows 8.1 Version 6.3.9600 Build 9600 on my HP 430 Notebook PC with 1 GB RAM and Pentium CPU @ 2GHz 2 Cores.
Display drivers are not working properly (i.e., everything appears bigger and unclear), earlier I'd successfully updated the display drivers and made it work using Device Manager. making a backup of the drivers (may be in .inf format) from the installed drivers so that I don't have to update it every time I re-install it.
I'm new to Windows 8 and I'm having a hard time managing my way around. My windows automatically installed almost all of my drivers, but failed to recognize the coprocessor. When i open the properties it says:
The drivers for this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
When i try to find the driver automatically,it fails, but i cant find them aswell.
My motherboard is ASROCK 939a8x-m, therefore it has an nvidia chipset in it. I fail to find the neccessary drivers aswell and i don't know what else to do.
I'm certain I have the right memory installed. I just noticed that Windows seems to think I only have 4GB installed (I have 8 installed). In doing some research about this, I found that maybe the BIOS needs to be updated. I don't want to update the BIOS unless necessary in order to avoid something getting messed up.
View 8 Replies View RelatedI installed windows 8 in HDD 1tb Seagate. Then I bought Corsair 240 SSD drive and fresh installed everything there. Now if I boot from SSD drive my Seagate won't show up and I have tried other cables I have 5 hard drives in my system. It shows up in boot menu but won't show up in Disk management or anywhere else.
Then I connected it to the USP port and disk shows up no problem. I would like to leave this copy in as a backup so I don't want to delete it. I can boot into these windows but then my Corsair SSD drive won't show up. Whats up here.
My pc specs are as follows:
1)Intel 4670 K
2)Asus Sabertooth Z87
3)12 GB DDR3 ram
4)Windows 8.1 Pro x64
5)Razer DeathAdder 2013 mouse
6)Logitech Usb keyboard
My pc was working fine until yesterday night when july windows update was downloaded and installed.
Then when today morning i booted up my pc all my usb devices stopped working, I cannot use my mouse or keyboard when my windows is booted.
However, I am able to use my mouse and keyboard fine in UEFI bios without any issue.
I tried clearing cmos,changing ports,enable and disable legacy usb in bios,enable and disable intel xhci still my mouse and keyboard are not working when windows boots up.
I tried system restore using windows 8 cd but it ends up giving some error during restore and says unable to restore.
I am able to access my system registry and explorer using the windows 8 cd.
Is this normal? if not then how do I use ALL of the memory?It detects that I have 8gb of ram but it only uses 4gb of it. I saw that 4gb was in hardware reserve and i dunno how to allocate more memory for use...
I have Windows 8.1 SL OEM
AMD FX-8350 8-Core @ 4GHz | Cooler Master Seidon 120v Liquid Cooling System | AMD Radeon R7 250 2gb DDR3 with Boost | ASRock 990FX Extreme4 | Kingston HyperX Fury 4gb (2x) | ThermaTake 700w LitePower| WD Caviar Green 2TB HDD | Corsair Carbide 300R Windowed
1. BIOS is updated
2. I can only change the DRAM Frequency in the BIOS, I currently set it to 1600 in hopes of fixing it
3. Msconfig > Boot > Advanced > Maximum memory unticked
4. I have also put both sticks in slot 1 & 3 but no luck
5. Kingston HyperX Fury is not on my mobo's compatibility list
6. Regedit-> Hkey local machine->CurrentControlSet->Control->SystemResources->ReservedResources -> No Value set
7. I tried to boot my pc using each sticks themselves, still no luck but:
8. There are no programs that are hogging the ram yet
9. I have contacted the Kingston representative over at tomshardware.com
10. for more details: 8GB of ram installed but i can only use 4GB of it? - RAM - Memory
I tried to install more RAM, but after I put the sticks in, System information told me only 4GB of the 12 total GB were usable. My setup was two 2GB sticks in ports 1 and 2 and four 4GB sticks 3 and 4. I then switched it around and put the two 4GB sticks in ports 1 and 2, and the two 2GB sticks in 3 and 4. After this 8GB of the 12 were usable. Finally I tried putting the 4GB sticks in ports 1 and 3 and the 2GB sticks in ports 2 and 4 and vice versa.
RAM Sticks
4GB - Newegg.ca - CORSAIR XMS3 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMX4GX3M2A1600C9
8GB - Newegg.ca - Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model KHX1600C9D3B1K2/8GX
MOBO - Newegg.ca - ASUS P7P55D Deluxe LGA 1156 Intel P55 ATX Intel Motherboard
Since installing ssd drive I now have a loud fan noise, when I have checked speccy it is running at 59 degrees C so it is running hotter also.
View 1 Replies View RelatedI built a computer recently (so it's not a 'store-bought system'), installed 16 GB of RAM, but System Information shows only 2.96 GB as usable. I'm using Win 8, 32-bit, with an Intel i3-2120 (3.30 GHz) CPU on an MSI motherboard. Not a gamer, so I have only a low-end GE Force 210 video card.
From what I gather, Windows 8 (32-bit) only allows a certain amount of RAM to be used. Is this correct? If so, did I make a mistake by installing 16 GB, when I could have installed a lesser amount? For example, if Windows 8/32-bit only recognizes (or at least, uses...) something like 3.5 GB---should I have simply stuck in 4 GB?
FYI, I'm happy with my computer, my wife and I can surf just fine (we have cable Internet, with an advertised speed of 15), and I don't really have any complaints. Just trying to educate myself about installed versus usable RAM.
I recently bought an Acer Aspire E laptop but accidentally damaged the hard drive a few months later and had to replace it. My friend knows a lot about computers and has a side business fixing them and works as tech support for a company and for his university, so he installed the new hard drive for me and downloaded most of the drivers and installed them and said he would get the wireless working later. He eventually came back a few days ago to finish it up and after he left, I realized the wifi STILL was not working.
I have an ethernet cable and the thing it plugs into here in my dorm room, and the wifi works fine when connected to an ethernet, but Christmas break starts in a few days and I have no way to connect with my ethernet cable at home. I have my old laptop that I'm currently using but it's shitty and it doesn't turn on unless it's connected to the power cord so I can't really take it anywhere.
I've tried redownloading and installing all of the drivers myself but it doesn't do anything at all and I don't know enough about computers to figure it out. I did see that there is a yellow triangle next to the network controller driver so I'm assuming it probably has something to do with that being missing.
HP's support site for the specific model M6-1035 lists no driver for the webcam. it was there under windows 7 but I don't recall ever deliberately installing a driver for it - I assumed win7 had it.
Windows 8.1 does not. nothing in 'devices', nothing under device manager, and no driver listed on the HP support site. the latter is not surprising since they don't provide a host of drivers for the laptop.
No keyboard-specific drivers [like for the function keys etc], wrong firmware for optical, and other small things.
Any generic cam driver that will function?
my windows 8 x64 enterprise.
First of all Re-install is NO option WHATSOEVER. Because i have 500 + games installed. I have a masterbackup of it but i have 200+ new games I want to fix this installation before I do a new masterbackup.
The problem is I can't install nvidia drivers I got failed to install simple error. I think this is related to the processor /raminfo not showing in management computer and DXDIAG.
So I read around abit and it was said problem might be related to WMI? So I did all things suggested but I still get the error code 127 when trying to start WMI.
Windows8.1 do not recognize any bluetooth., But Windows 8 will be easily identified. Install bluetooth driver in Windows 8.1, but I do not know why I can not be activated.
Model: Asus k53sd
Trying to find out before I start whether the printer above is supported in Windows 8/64 - All Epson says where there is no specific driver update, that it "might" be supported out of the box. if MS (or printer manufacturers) actually listed what printers/scanners are supported in Windows 8/64. know if the DX7400 will work in Windows 8/64?
View 5 Replies View RelatedWindows 8 Pro with Skype 6.3.0.107 - device manager shows no errors (webcam driver version 1.0.3.37), Skype can see the spc900nc integral mic but cannot see the webcam.
PS: For the record the win 7 compatibility report says the webcam is compatible.........
How can I modify an Windows 8.1 ISO so it can work with a non-supported CPU? I would like to make it work with a Pentium 4 2.8Ghz HT Northwood CPU. Rest of specs; 2GB RAM, ATI 4650 DDR3 1GB, 250GB HDD. Computer is a SONY VAIO PCV-RS430G. I updated its BIOS to latest which dates back to 2004 but did not add the NX/PAE that is needed for Win 8.1
View 6 Replies View Related1. Keys do not work in Any of the Internet Browsers. Even the on-screen keyboard does not work.
2. Every time I double click a file, A pop-up "Do you want xyz to make changes to the computer ?" is welcoming me!
3, I click on any of the icons in the task-bar and a new window is opening. For example, If I click on the firefox icon pinned at the bottom, Every instance I click it, a new window is opening
4. I am not able to open a folder by double click. I can only open it by right click and then Open
5. None of the keys and keyboard shorcuts seem to work. But that is not the problem with keyboard because, I am able to type words in Wordpad and Notepad
I formatted my Windows 8 twice and still these problems are there. Even if I restart it, things work fine for 5 min and then the problem would be back.
-Windows 8.1 Professional x64
-I have (2) HDD's under RAID 1 {mirrored}
After fresh install I now have the (2) HDD's shown and was was notified to install chipset driver, so I did and ended up installing the Intel Rapid Storage Technology.
Now my (2) HDD's are mirrored {combined to one drive} but the problem is I get an error about recycle bin being corrupt, delete- yes or no?.... and nothing works trying both options and the message keeps coming up.
I have Acer Aspire v5-571G and the Acer Launch Manager, does not start in my windows8.1. it just stays there, does not apear on screen or what so ever, its really hard to turn of wifi and bluetooth without it.
View 8 Replies View RelatedThis is troublesome for a number of reasons.
Can't access BIOS/CMOS.
Can't go into Safemode.
And sometimes, it takes a good 30 seconds after Windows 8.1 log in screen for me to be able to use USB devices. I say USB devices, but what I really need is my keyboard and mouse. Neither work.
This Emachines E525 Laptop has a built in Camera and i wanted to use it to Recode video and save it onto my hard drive
i am trying to recode a video using my laptop camera so i will save the video in my hard drive
so first issue the driver wont work after installing the camera driver the application start and close
no error
I tried manycams and other 3 software like easywebcam and so on and non of the would see webcam installed
I am not trying to chat or skye or anything i would love to have webcam working so i can recode the video and save it in my hard drive. what i need:
1- to get webcam working
2- Find a software that is able to recode a video and save it into the hard drive