I own a Sony Vaio (VPCEB4M1E) which came with Windows 7 and Mobility Radeon HD 5470. When I upgraded to Windows 8 Enterprise Evaluation, my Device Manager would show up my Display Adapter as "ATI Mobility Radeon HD Series 5000 - (Microsoft Corporation WDDM v1.20)
When I first tried installing the driver I downloaded, the installation would finish in mere seconds (only installs 20MB of the files which isn't really useful), giving me notifications of success. However, I knew it didn't install it, the screen didn't flash and well, the Device Manager didn't change its description at all. I had managed to find a solution by manually updating the driver through Device Manager. It worked great.
I upgraded to Windows 8 Pro recently but ever since I was not able to use this method in order to get my driver properly installed. Whatever I try, I keep getting the "Windows detected that your driver is up to date, etc etc) and I still get the same Microsoft Corporation information. I tried disabling automatic drivers installation but didn't work either. I downloaded various drivers which I know would work, it's just that I'm not able or allowed to install them. The setup installation is faulty and the Device Manager won't let me do it either. If I try to uninstall the current Microsoft-provided driver, then I lose the whole Display Adapter category from the list, making it impossible to install the driver.
Unless I manage to find some kind of turnaround for this, I'll probably have to do without proper drivers..
I have an Acer Aspire 5515 with an AMD Athlon 2650eprocessor (64 bit) however, I have installed the 32 bit version of Windows 8 Pro. I cannot locate a driver for the ATI Radeon Xpress 1200 Graphics card that is compatible with Windows 8 32 bit. Acer's website is no support, since they only ever sold the Aspire 5515 with XP or Vista 64 bit systems, therefore they cannot provide what I need.
AMD's website is useless. It's auto-detect system for determining which graphics card and operating system I'm using is incompatible with Windows 8, and there is no method for ,e to type in which card and OS I have (you can only select from pull down menus, and the 1200 series and Windows 8 are not listed). Following the links to contact their technical support take you to a video on how to determine what graphics card you have, then right back to the beginning all over again. Worthless.
ATI says I can run a Vista driver in Windows 7, but I can't even find a Vista driver in 32 bit, and I'm using Win 8, not 7. I'm to the point where I'm going to install Windows 7 64 bit and be done with it.
I'm running Vista 64 and tried to upgrade to win 8. It went well enough, but my screen resolution became very poor. I have AMD Radeon X1250 graphics and can't find a driver that will work on Win 8, so I reverted to Vista. But I really want to run Win 8.
I've recently bought an XFX 7870 Tahiti and have been having loads of trouble getting the drivers installed in Windows 8 64bit. It shows up as Microsoft Basic Display Adaptor and when I try to install the Catalyst drivers I get the BSOD with the following error:
When I first got the card I spent a couple of weeks trouble shooting this. I tried various things such as driver refreshes, running memtest, reseating every component in the case. Basically everything I could find online!
Eventually I took an image of my HTPC which runs Windows 8 32bit and copied this image over to my new rig. The card then installed fine. The card works perfectly in 32bit with no issues what so ever. This is fine, other than the fact that I can only use 3GB of my 12GB of memory!
With the release of Windows 8.1 Preview I thought I'd have another bash at this but still get the same issues. On a completely fresh install of 64bit I get the same BSOD but the 32bit version is completely fine.
I can't install the drivers, when i run the setup it only installs AMD Catalyst Install Manager, no drivers the ATI Techonologies folder is empty. I tryed installing it manually from device manager but it says "The driver selected for this device dose not support this version of Windows". I really hope that i don't have to revert to Windows 7.
I just installed the Windows 8.1 Preview 64-bit last night and am loving the improvements over Windows 7 Pro 64-bit!!! I am running it on a Dell Optiplex 745 Tower.
My only problem is that my ATI FireGL V3100 is not being recognized by windows at all. I checked in the device manager and it doesn't even show up. I currently have a monitor hooked up to the card and it is working fine. Unfortunately, AMD doesn't have a driver for Windows 8. For that matter it didn't have on for Windows 7 either, only a Vista driver, but it worked fine in Windows 7. Same thing with the Dell drivers, worked for Windows 7, but not for Windows 8, even though the drivers were for Vista 64-bit.
I am wanting to hook up a second monitor, but when I do, it doesn't even detect the second monitor. All it does mirror the first display onto the second monitor. I looked into the Screen Resolution settings and even tried clicking Detect. Nothing. It found my first monitor, a Acer AL1916. Even when I unplug the Acer, it thinks the other monitor, a HP LP1965, is the same thing, it doesn't change the name of the monitor. I even tried going to HP to get a driver for my second monitor and installed that, to no avail.
I have the Dell Inspiron 15R 7520 SE laptop with 2GB AMD Radeon dedicated graphics. As far as I remember I have the AMD Radeon 7730 HD series hardware.Recently while upgrading my catalyst control centre I noticed that my hardware changed to AMD Radeon 7700(as seen in device manager). my Catalyst Control Centre is working fine.
When playing almost any game that has some kind of load on the GPU (from FPS games to Strategy), the game often freezes after around 10 - 60 minutes of playtime and the FPS drops to an unbearable amount and the only way to 'solve' the FPS issue is to restart the PC.
For some games, this FPS drop doesn't happen and it just freezes about 4 or 5 times before ultimately crashing because of some display driver issue about the AMD drivers not responding. This kind of issue usually happens with the older games rather than modern ones.
I am running an MSI Radeon 6850 with an AMD Phenom II X4 960T and a 600W power supply. I have tried all kinds of graphics drivers: the latest stable ones, the latest beta ones. I have tried uninstalling all graphics drivers and reinstalling them, with and without driver cleaning software but all to no avail.
I am now starting to think it may be a hardware issue but I do not have another graphics card to swap it out for so.
My system is a Windows 8 x64 Pro with Boot Camp 5 running on a 2011 Macbook Pro. I'm experiencing Windows crashes and distorted screen images with artifacts (see attachment #1) almost every time I start programs that require heavy video-processing (e.g.: games). The problem also happens, even if rarely, at random without doing anything particular.
This is what is shown in the debug trace of MEMORY.DMP:
Code: Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64Copyright (c) Microsoft Corporation. All rights reserved.Loading Dump File [C:WindowsMEMORY.DMP]Kernel Bitmap Dump File: Only kernel address space is availableSymbol search path is: srv*f:symbolswebsymbols [Code] ....
As you see, it really looks like a video card problem related to atikmpag.sys. I think in cases like this the first thing to try is updating the drivers but unfortunately, since I'm running Windows on Boot Camp, it looks like there aren't suitable drivers apart from the ones I'm already using. I tried to install the ATI CCC 12.8 beta 2 (that is the only thing that I can run) that seem to suit my system, but that didn't work.
I have been suggested to look into the power settings of the video card (because they may lead to system instability), and specifically I tried playing a bit with the AMD PowerPlay - Technology in the CCC. Anyway, when I open the tab, the lists show up as blank and there is really no option I can work on (see attachment #2). It looks like my video card doesn't support this feature, even if I think it definitely should like it says in the AMD page: AMD PowerPlay.
Every time I try to download the HD7310 AMD driver instead I get a program that wants to charge me to auto update all my drivers.
I just want to download the latest Windows 8.0 64 bit driver for HD7310. I'm on a Laptop and the video text is horrid. I have catalyst software installed but every time I try to adjust brightness and/or contrast it looks nothing like the sample page. It gets progressively worse the more I attempt to adjust it. I can't believe it's this tough to get legible text on a monitor in this day and age.
I have to reinstall Windows 8 on my laptop for some reason. So after installation finished I went to Device Manager for Installing Drivers. After all the other drivers like Chipset, Network, Audio etc, I went to the Install the Display Driver. There I noticed that under the Display tab my NVIDIA GT 650M is already listed but usually if any Device driver is not installed then it will be shown as Unknown Device or Standard VGA Adapter. But here it shows that it is working and one more Thing I noticed is that in the display tab it was written:-
NVIDIA GT 650M (Microsoft Corporation-WDDM 1.2)
So my question is that should I install the NVIDIA driver from my ASUS Driver And Software Utility Disk or should I keep it as it is? I have heard somewhere that WDDM drivers works better than any other Driver with Windows 8. Is it true? I didn't get any Performance Fall or any BSODs etc and games are also working.
My problem is that I can't change resolution on my laptop's display with win 8. It's quite an old, Toshiba Satellite M70. I installed win 8 directly from XP. Everything is working fine except this. I tried to install the old drivers in compatibility mode, but says the system requirement is not enough. Do I have any chance to make it work?
All the new nvidia graphics drivers pass 314.22 has a well-documented crashing problem on certain models which I'm a victim to. So I always stay on 314.22. Problem is, windows is a bit too smart for its own good and keeps trying to install the newest version without asking or even prompting me. I can disable it from doing that by changing the "Device Installation Settings" to "Never install driver updates from windows update", but the problem I realized today is that this prevents windows from auto installing all other driver as well... for example, when I plugged in my printer, it said in order to auto install the driver I need to re-enable the auto driver update thing. The minute I re-enabled, BOOM, windows 8.1 re-installed the newest nvidia driver, and i had to spend more time rolling back and uninstalling all the parts I don't need, like HD audio, nvidia update, 3d vision .etc. etc
So my question is, is there anyway I can disable windows from updating that specific driver, or, if there is a way I can manually make windows install drivers for new devices (through windows and not driver hunting on manufacturer website) without having to enable the automatic driver update option.
P.S, when the setting is on "Never install driver updates from windows update", I see the nvidia update when I manually check for updates. So I tried hiding the update. Unfortunately, as soon as I let windows automatically install newest drivers, the nvidia driver installs anyway....
Here's what I've done - besides googleing for the past 5 hours...: Updated intel chipset Tried the guide here: How to Fix NVIDIA Driver Update Installer Error - YouTube ---- this got me a little further but as soon as it tries to access my tv the installation dies (the time of a gfx installation where the screen flickers) Removed the windows driver. Uninstalled old nvidia drivers.
So I've been trying to update my graphics card. Before I ever got the notification for the update and tried to install it, I could play minecraft, and star craft, and watch Netflix video. When I did install, and was given the failed due to I/O error box, I couldn't play any games or watch any Netflix. Don't know what to do to fix this. Since, I've gone to my manufacturers website and re-installed my driver, but I think the real problem is seeing how I cant connect it. It always says it failed due to the I/O error, so I cant connect it to the video card or something.
My computer is a Toshiba. other info:
Model: Satellite L875DProcessor: AMD A6-4400M APU with Radeon(TM) HD Graphics 2.70 GHzPlenty of RAM (only 5 month old computer)
In Device Manager under Display Adapters It says Microsoft Basic Display Adapter. I just need to know how to change it. I've gone in through device manager, pressed update driver, chose to do it manually and choose a signed driver. When I choose My AMD Radeon Drive and it attempts to install, it always says it failed due to an I/O error. This has been going on for a week or so, and I thought I could fix it, but nothing works.
I had opened up GeForce Experience and automatically updated my graphic drivers.The updater crashed while updating.Tried to update again and it gave me the message saying my driver was up to date no need to update.Opened up Steam and tried to play a few games and they all crashed. I also noticed games outside steam were very sluggish.I checked device manager and only my onboard video card was shown. My high performance card was no longer listed under display.
So I uninstalled GeForce experience and the driver then reinstalled an earlier driver version (I could just install the previous version and it should 'roll back').Same problem, my games would crash and things were slow.Removed those drivers and reinstalled earlier ones.Rinse and repeat removing and installing different version drivers 3 times. After being advised not to use GeForce Experience to update my drivers and to go to the manufacturer website I did so. I removed my current video driver and installed the one I downloaded from manufacturer.
Throughout this whole event certain drivers make my video card not appear in device manager and require me to install a different driver on it to get the card to display. Everything worked 100% fine until GeForce Experience crashed on me.
Currently; my video card is shown in device manager the driver seems to be installed and my games do in fact work. The problem is the FPS rate is extremely low. Before this issue I was having around 240 FPS inside certain steam games which I'm now getting 80. Before I updated the graphics driver my entire laptop worked extremely well and I've yet to have any issues. With that being said; I believe that if I could completely uninstall the graphic driver and reinstall the one I had before all this mess occurred things would be back to norm.
How to figure out what version I used to have and I'm not so sure I'm uninstalling the driver completely. (I'm in device manager just selecting uninstall) I'm willing to roll back my laptop a few days but I do not have restore point created. Maybe the driver is not installed correctly?
A different way to uninstall the driver or maybe a way to freshly install the video card, I don't know. Any simple way to restore my laptop to the way it was when I got it I'm willing to do that as a last resort. Everything I have is backed up.
System Specs: OS. Win 8.1 CPU. i7-4700MQ GPU. GeForce GTX 780m Ram. 16gb Make / Model Dell - Alienware 17.
i bought new computer few days ago.i have sapphire HD 7750 2gb ddr3 - and im installed the driver for that by the CD but after i want to play some games . i get this massage Display driver stopped responding and has recovered.
Windows 8.1 NEW Flashed the MB BIOS to 1903. ( Completed ) ASUS MAXIMUS V EXTREME 1155 - Z77 Secure Erased the OCZ VERTEX 4 SSD's & updated the firmware to 1.5 ( SPOTLESS / COMPLETED ) Unhooked LAN connection ( STILL UNHOOKED ) Unhooked other drives ( STILL UNHOOKED ) Set Up Fresh NEW RAID0 w/Intel RAID controller used: Intel AHCI/RAID Driver Path for Windows Windows 8.1 32bit & Windows 8.1 64bit. Intel Rapid Storage Technology Driver software V188.8.131.526 for Windows Windows 8.1 64bit---(WHQL). Intel Rapid Storage Technology Driver software V184.108.40.2066 for Windows Windows 8.1 32bit---(WHQL).
Ran the Chipset Driver: Intel Chipset Driver V220.127.116.116 for Windows Windows 8.1 32bit & Windows 8.1 64bit---(WHQL). RAN it in compatibility mode as told! VARIFIED it to be installed!
Now when I go to install the VGA driver I get a dam error message
* This computer does not meet the minimum requirements for installing this software *.
Yesterday I was playing Dota 2 when suddenly I got a black screen and "display driver has stopped working and has recovered."
Right after, I tried to open the game again. There was no way of getting it working.
Any other game was also not working. The first thing I did was, of course, trying to reinstall the driver.
I tried to install the lastest driver (337.50 beta) and I got only "installer has failed". I also tried with many other older drivers and such, with no result.
Other things I tried:
Clean install (from custom install options)Hard clean install (Deleting all nvidia files before)Display Driver Uninstaller safe mode + reboot and install (same error)Install in safe mode (installer error)Register again WMI files (nothing changed). Take ownership of various folders containing drivers (nothing changed)Directly install INF files using devmgmt (gives error code 28) Changing some registry values regarding vbscript that fixed it for other people. Use Windows Update. "1 update was not installed" + error 80070002sfc /scannowRollback from devmgmtRestore to a early system point where it was working (couldn't restore, no matter what point I choose)
Nothing worked. It just won't install. Now I'm stuck with Microsoft base driver and can't play anything.
Here's the installer log, the only part with errors: Log (full log attached)
Event viewer shows nothing.
My system specs: CPU-Z Validator 4.0
I think it's probably a miracle if I get this working without refresh/reinstall Windows.