I can't install the drivers, when i run the setup it only installs AMD Catalyst Install Manager, no drivers the ATI Techonologies folder is empty. I tryed installing it manually from device manager but it says "The driver selected for this device dose not support this version of Windows". I really hope that i don't have to revert to Windows 7.
View 3 Replies
I just installed the Windows 8.1 Preview 64-bit last night and am loving the improvements over Windows 7 Pro 64-bit!!! I am running it on a Dell Optiplex 745 Tower.
My only problem is that my ATI FireGL V3100 is not being recognized by windows at all. I checked in the device manager and it doesn't even show up. I currently have a monitor hooked up to the card and it is working fine. Unfortunately, AMD doesn't have a driver for Windows 8. For that matter it didn't have on for Windows 7 either, only a Vista driver, but it worked fine in Windows 7. Same thing with the Dell drivers, worked for Windows 7, but not for Windows 8, even though the drivers were for Vista 64-bit.
I am wanting to hook up a second monitor, but when I do, it doesn't even detect the second monitor. All it does mirror the first display onto the second monitor. I looked into the Screen Resolution settings and even tried clicking Detect. Nothing. It found my first monitor, a Acer AL1916. Even when I unplug the Acer, it thinks the other monitor, a HP LP1965, is the same thing, it doesn't change the name of the monitor. I even tried going to HP to get a driver for my second monitor and installed that, to no avail.
Today I just installed Windows 8 enterprise from Windows 7 Home Premium, I had to make a clean install because they didnt let me do the upgrade from Win7 Home premium.
When I ended installing Windows 8, I checked the device manager, and showed me that AMD Radeon HD 6800M was not working.
My video card is an AMD Radeon HD 6870M.
All my system information can be found here: file:///F:/System%20Information.html
My ATI Mobility Radeon HD 5650 in my laptop is overheating (confirmed with SpeedFan). Is it at all possible for me to underclock it a bit?
Laptop specs:
Compal NBLB2 customized by iBuyPower
15.6 inch capacitive multitouch screen @ 1920x1080
Intel Core i7 740 QM @ 1.73 GHz (up to 2.93 GHz turbo boost)
8 GB 1333 MHz DDR3 RAM
500 GB 7200 RPM SATA-II HDD
Windows 8 Pro x64 (legacy boot)
I've recently bought an XFX 7870 Tahiti and have been having loads of trouble getting the drivers installed in Windows 8 64bit. It shows up as Microsoft Basic Display Adaptor and when I try to install the Catalyst drivers I get the BSOD with the following error:
page_fault_in_nonpaged_area atikmdag.sys
When I first got the card I spent a couple of weeks trouble shooting this. I tried various things such as driver refreshes, running memtest, reseating every component in the case. Basically everything I could find online!
Eventually I took an image of my HTPC which runs Windows 8 32bit and copied this image over to my new rig. The card then installed fine. The card works perfectly in 32bit with no issues what so ever. This is fine, other than the fact that I can only use 3GB of my 12GB of memory!
With the release of Windows 8.1 Preview I thought I'd have another bash at this but still get the same issues. On a completely fresh install of 64bit I get the same BSOD but the 32bit version is completely fine.
I have the Dell Inspiron 15R 7520 SE laptop with 2GB AMD Radeon dedicated graphics. As far as I remember I have the AMD Radeon 7730 HD series hardware.Recently while upgrading my catalyst control centre I noticed that my hardware changed to AMD Radeon 7700(as seen in device manager). my Catalyst Control Centre is working fine.
View 5 Replies View RelatedI own a Sony Vaio (VPCEB4M1E) which came with Windows 7 and Mobility Radeon HD 5470. When I upgraded to Windows 8 Enterprise Evaluation, my Device Manager would show up my Display Adapter as "ATI Mobility Radeon HD Series 5000 - (Microsoft Corporation WDDM v1.20)
When I first tried installing the driver I downloaded, the installation would finish in mere seconds (only installs 20MB of the files which isn't really useful), giving me notifications of success. However, I knew it didn't install it, the screen didn't flash and well, the Device Manager didn't change its description at all. I had managed to find a solution by manually updating the driver through Device Manager. It worked great.
I upgraded to Windows 8 Pro recently but ever since I was not able to use this method in order to get my driver properly installed. Whatever I try, I keep getting the "Windows detected that your driver is up to date, etc etc) and I still get the same Microsoft Corporation information. I tried disabling automatic drivers installation but didn't work either. I downloaded various drivers which I know would work, it's just that I'm not able or allowed to install them. The setup installation is faulty and the Device Manager won't let me do it either. If I try to uninstall the current Microsoft-provided driver, then I lose the whole Display Adapter category from the list, making it impossible to install the driver.
Unless I manage to find some kind of turnaround for this, I'll probably have to do without proper drivers..
I have an Acer Aspire 5515 with an AMD Athlon 2650eprocessor (64 bit) however, I have installed the 32 bit version of Windows 8 Pro. I cannot locate a driver for the ATI Radeon Xpress 1200 Graphics card that is compatible with Windows 8 32 bit. Acer's website is no support, since they only ever sold the Aspire 5515 with XP or Vista 64 bit systems, therefore they cannot provide what I need.
AMD's website is useless. It's auto-detect system for determining which graphics card and operating system I'm using is incompatible with Windows 8, and there is no method for ,e to type in which card and OS I have (you can only select from pull down menus, and the 1200 series and Windows 8 are not listed). Following the links to contact their technical support take you to a video on how to determine what graphics card you have, then right back to the beginning all over again. Worthless.
ATI says I can run a Vista driver in Windows 7, but I can't even find a Vista driver in 32 bit, and I'm using Win 8, not 7. I'm to the point where I'm going to install Windows 7 64 bit and be done with it.
I'm looking for a windows 8 64x driver for an ATI MOBILITY RADEON X2300 VIDEO CARD
I have a gateway E-295c convertible. I converted FROM Win 7 64x to Win 8 64x- MS generic driver does not provide for dual monitors. I'd like to find a driver or I must restore Win 7.
I am running Mobility Radeon X2300 on ASUS F5V (Windows 8) but I am not sure whether to install Windows 8.1. Is that card compatible with windows 8.1? Tried to install Windows 8.1 over this card?
View 1 Replies View RelatedI have installed windows 8 pro with media center-64bit,on my pc . I think my graphics card is not running, none of my games are running,I think my pc is using onboard graphics .
running win 8 on inteldh55pj motherboard,ati Radeon 5770 graphics card
When playing almost any game that has some kind of load on the GPU (from FPS games to Strategy), the game often freezes after around 10 - 60 minutes of playtime and the FPS drops to an unbearable amount and the only way to 'solve' the FPS issue is to restart the PC.
For some games, this FPS drop doesn't happen and it just freezes about 4 or 5 times before ultimately crashing because of some display driver issue about the AMD drivers not responding. This kind of issue usually happens with the older games rather than modern ones.
I am running an MSI Radeon 6850 with an AMD Phenom II X4 960T and a 600W power supply. I have tried all kinds of graphics drivers: the latest stable ones, the latest beta ones. I have tried uninstalling all graphics drivers and reinstalling them, with and without driver cleaning software but all to no avail.
I am now starting to think it may be a hardware issue but I do not have another graphics card to swap it out for so.
I'm running Vista 64 and tried to upgrade to win 8. It went well enough, but my screen resolution became very poor. I have AMD Radeon X1250 graphics and can't find a driver that will work on Win 8, so I reverted to Vista. But I really want to run Win 8.
View 9 Replies View RelatedMy system is a Windows 8 x64 Pro with Boot Camp 5 running on a 2011 Macbook Pro. I'm experiencing Windows crashes and distorted screen images with artifacts (see attachment #1) almost every time I start programs that require heavy video-processing (e.g.: games). The problem also happens, even if rarely, at random without doing anything particular.
This is what is shown in the debug trace of MEMORY.DMP:
Code: Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64Copyright (c) Microsoft Corporation. All rights reserved.Loading Dump File [C:WindowsMEMORY.DMP]Kernel Bitmap Dump File: Only kernel address space is availableSymbol search path is: srv*f:symbolswebsymbols
[Code] ....
As you see, it really looks like a video card problem related to atikmpag.sys. I think in cases like this the first thing to try is updating the drivers but unfortunately, since I'm running Windows on Boot Camp, it looks like there aren't suitable drivers apart from the ones I'm already using. I tried to install the ATI CCC 12.8 beta 2 (that is the only thing that I can run) that seem to suit my system, but that didn't work.
I have been suggested to look into the power settings of the video card (because they may lead to system instability), and specifically I tried playing a bit with the AMD PowerPlay - Technology in the CCC. Anyway, when I open the tab, the lists show up as blank and there is really no option I can work on (see attachment #2). It looks like my video card doesn't support this feature, even if I think it definitely should like it says in the AMD page: AMD PowerPlay.
SONY is not providing windows 8 support for model VPCEB14EN.
where will get windows 8 drivers for graphics card ATI Mobility Radeon HD 5470. I checked AMD website but not found and also Bluetooth BROADCAM drivers are also missing.
My computer is hp envy dv6 7280sf notebook with 2 GPUs intel graphics HD 4000 and Nvidia Gefoce 630 M running windows 8 64x.
After making an free upgrade online for windows 8.1 which run successfully, both gpus were ok...
But after receiving a windows update with new drivers for intel graphics 4000 gpu , after install and restart , the computer freezes on blank black screen at windows startup with no mouse or anything only backlight.
So safemode was succeful but i figured that the update for windos update was the cause and graphics drivers were installed so i removed the drivers for intel graphics and itried to reboot the computer so the restart was succeful but the intel graphics card was unistalled and no drivers were automatically installed so i tried to download and install the drivers from hp and intel website for windows 8.1 however the install fails.
Automatic install from device manager failed both online and from computer and even from manual driver selection.
So therefore the install failed in safe mode , and the high def audio device ( on screen audio possibly) failed and the device was not recongnized (no drivers installed) so i'm stuck without anydrivers for the integrated gpu and the games are no longer able to run normally even if the nvidia card is on.
I tried downloading an installing Windows 8 drives but it failed to install also , for instance any new install of drovers seems to fail for me even for external usb hard drive.
I'm building a system for cryptocoin mining, and am having a little problem with getting Windows 8.1 (home, not pro) to run the 3rd card (GPU) My equipment is:
Gigabyte 990 FXA UD3 MOBO
AMD Vishera CPU
2x4 gig Corsair Ram
3x Sapphire r9 280x Video cards
1000w Corsair PSU
Scandisk SSD
All parts are brand new.
Here is the problem... everything boots just fine and runs with 2 of the GPU's installed. I have the latest AMD 13.12 drivers, and the AMD APP SKD installed. When I add the 3rd GPU though, windows will auto detect it as a Radeon 7900 with the caution sign, AND/OR a r9 200 series card, also with the caution sign, most times BOTH. Then it randomly freezes the system. A couple of times I got it to run long enough just by luck I guess, to install the 13.12 drivers on the 3rd GPU, but then in a few minuites the system would freeze again.
2 GPU's run just fine, the problem only shows up when the 3rd card is installed, and it happens on any of the 4 16x slots, or both 1x slots on the MOBO. It doesn't matter if the GPU's are directly on the MOBO, or on 1x16 risers. There are plenty of folks running this set up with up to 6 GPU's, so I know it can be done, but I must be missing something somewhere in the windows set up.
I've got a bit of a strange issue that I haven't had with previous OSes on this PC. I'm running a Dell OptiPlex 380 with Win 8 x64 at the office and I have to run 2 video cards for all of my screens. I have a GeForce 8400GS in the PCI-E slot and a GeForce 6200 in the PCI slot.
Previous to the Win 8 install, it worked fine. Booted exactly as I had shut it off. Now, with 8 - it's killing my PCI-E card presumably when it puts the screens to sleep when I leave for the day. So I'm coming in to all of my windows being moved to the PCI card's monitor (only one hooked to it) and I have to reboot to get PCI-E card to come back.
If I check the screen properties, I see only the screen hooked to the PCI card. I've changed the setting in the BIOS for the first video card to Auto and also tried the PCI-E selection and it's the same either way.
Why on earth would it default to the PCI card rather than the PCI-E card?
i am on windows 8.i am using HP laptop.this is my ccc version.
i got 2 problems:well first one is that i can't update to windows 8.1 as the update always hang on 82% and after that my laptop
automatically shutsdown i don't know whats the reason is and that's why i am stuck at windows 8 till now although have 8.1 ISO but i don't want to install it as i have to erase my my windows 8 which came pres-installed so i will loose my genuine windows 8 .now i want to know what if i open the 8.1 installer and install it from a virtual tool like Deamon although it gives an option to keep files app setting safe but i fear that it would conflict with 8 and i would have to format my laptop then ok now to the major problem i just recently purchased Watch Dogs and installed it.I played the first mission and got busted so the mission failed and it began to reload and then a error pops up saying watch dogs have stopped working upon googling i found out that this is due to DUAl AMD Graphics so they stated that i should disable it but i cant find any option of disabling DUAL Graphics.
graphic card : GT 740m
i play a browser game on chrome named begone nplay with my charger plugged in i get 100-130 fps but whenever i unplugged it it drops to like 20-40 fps . i checked power settings and its always on high performance .
how can i know GPU activity ?
i like a lot process hacker , i have the last version and under Windows 8.1 pro 64bit ,system information gpu is empty (there is always 0% activity
is there a program that let me monitor?
I just decided to turn loose Windows 8 RP on "bare metal" here as opposed to a VM. I didn't even bother to mess with video under a VM, but with the bare metal install, I've run into some trouble.
At first, media player didn't seem to play anything, including .wmv files. Messing around, I unchecked the "Direct X acceleration" box and that allowed it to play .wmv files. However, it still won't play .mp4 files -- no video, just sound, and Media Player will hang trying to exit.
It did this with a clean install with only the Windows supplied video driver. My video card has been obsoleted by AMD now (HD 4200 chipset) and I couldn't use the new Windows 8 preview driver package, but I did try installing the AMD 12.4 driver in Win7 compatibility mode. That worked fine it seems, but it still won't play .mp4 files. Turning the Direct X acceleration back on still kills .wmv playback as well.
Win7, both x64 and 32-bit played .mp4 files fine right out of the box on this machine.
I've tried to set up a dual monitor for Windows 8.
This is what happens:
Note: If i set it as the tv for the main screen it works fine?
I have the following graphics card Gigabyte GeForce GTX 650 Ti Windforce 2X NVIDIA Graphics Card - 2GB installed on the system in my sig, what are the correct BIOS setting for the GPU, The options are: PCI Slot, PEG, PEG1, PEG2 and PEG3
View 7 Replies View RelatedI'm having issues with one of my GPU's fans (it features a dual-fan cooling) and will have to fix it soon. The problem is, it's making an annoying noise and I was thinking if I could just block it for the time being, however brutally that sounds.
So, the question is - provided the GPU doesn't reach critical temperatures (I'm going to monitor this obviously) - would this create any additional risks, like overcurrent or something? (I don't play games, but it's a HD6950, so it does emit a lot of heat).
I actually think it's integrated, how do I do it? According to running a random game on systemrequirementslab.com (Dead Island), my dedicated video RAM is 32mb. It's not a custom built, I bought it from the store.
Here are specs according to dxdiag:
System Info:
Operating System: Windows 8 64-bit (6.2, Build 9200)
System Manufacturer: Dell Inc.
System Model: Inspiron 5323
BIOS: A08
Processor: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz (4 CPUs), ~1.8GHz
Memory: 6144MB RAM
Page file: 3252MB used, 5310MB available
DirectX Version: DirectX 11
[Code] .....
I am on my work computer, a DELL desktop with Windows 8.1, and I've been using a dual monitor setup for months, both with Windows 8 and 8.1. One monitor is connected via the VGA input, and the other is through a VGA to HDMI adapter. Again, they've been working flawlessly for months. It was a plug 'n play setup that took a minute and never had an issue.
I came in today and the second screen was blank. In the screen setup menu it recognized it and allowed me to adjust between extending, mirroring, etc. But after I unplugged it and plugged it back in, it no longer recognizes it. It simply cannot find a second monitor plugged in. Both screens work when plugged directly into the VGA port separately but not when plugged in the way they've worked for months.
How do I get "Screen Resolution" (on desktop, right click and select Screen Resolution) to show my main monitor as "1"?
View 5 Replies View RelatedI just purchased a new windows 8 PC. I was attempting to hook the computer up to my tv through hdmi (the pc has no VGA input) and when I went through the normal paces to put the display on my tv (display desktop only on 2), the signal did not transfer and there is no display on either my tv or pc! how to revert the display back to my pc monitor without being able to see anything? Acer support was less than useful. It's an acer aspire z3-605 all-in-one pc.
View 5 Replies View RelatedI've noticed that whenever I unplug my charger my brightness dims down to a point where I know its on, but I can't use it. Usually I have to put my computer to sleep and turn it back on to get it to fix. Also, the brightness wont adjust in anyway when its on. I've tried the function keys and the setting in the side bar. I have a toshiba laptop running windows 8.1 . I also have recently completely wiped it thinking it was a virus of some sorta with no change.
View 1 Replies View RelatedMy Sapphire AMD HD 7870 just bit the dust so it has been sent back with an RMA. I had hoped to replace it with an ASUS AMD HD 3850 but Windows 8.1 will not work with it. There is an error message on a blue screen something about a header (I don't have the exact error message today).
I suspected it was a driver problem so uninstalled the existing driver and tried to install the latest AMD one. I can uninstall OK but as soon as I reboot the Microsoft driver installs itself giving me no opportunity to install the AMD one.
