I have dell Inspiron 7537 and I need the serial key for windows to perform clean installation for windows 8.1 I contacted dell support to retrieve my windows key but no success ,
View 3 RepliesOn the Microsoft KB page How to perform a clean boot in Windows, they say that in Win 7 you should disable startup items from the General tab.
But in Win 8, even though Selective Startup and Load Startup items are shown the same way on the General tab, they say to instead disable the startup items from Task Manager>Startup tab. (On my Win 8 computer, Task Manager>Startup tab is only showing 5 items, seems like there might be more that are not showing).
i have recently brought Inspiron 14 3421, it came with per-installed Windows 8 and Wave Max Audio 4 software. The product i brought had issue so i handed over to Dell Authorized Service Center here, so for service purpose DASC guys uninstalled OS and re-installed but after re-installation i could not find out Wave Max Audio 4 software. how to reinstall Max Audio 4 software?
View 1 Replies View RelatedI have bought a Dell Inspiron 15R which arrived this week. I have already decided that I am going to install my own copy of Windows 8.1 Professional on to my system.
I have tried this several times now and I keep failing. I am booting from my DVD and the install goes fine. However during install I am normally prompted to enter my Serial for 8.1 and it does not do this. It progresses as though everything is ok, I can format the Hard drive and then it proceeds to install Windows 8.1.
Once fully installed I then go to see if it is activated and to my surprise it is. It has activated with the same Serial as the OEM that came with the laptop.
I have also noticed that this copy of 8.1 cannot join the laptop to my own domain (the options to do this are greyed out) which I am also wanting to do. So this copy of 8.1 is not the copy I am trying to install.
How can I install my own copy of 8.1. I think this is something to do with Dells bios configuration but not sure where to start.
My Dell XPS One 2710 was delivered with Windows 8 with wrong language. Dell therefore sent me a Windows 8 MUI Recovery Media-DVD, and told me to follow the instructions on this link: [URL] .....
At the first installation attempt I got to a point where a pop up asked for drivers. I didn't know which drivers, and I thought everything was included on the DVD (but even the DVD-ROM wasn't recognized, only "Boot (X:)"). I read a tip in the Dell forum to change the boot setup to legacy. So I did and I got a few steps further to the point where you shall choose the partition(s) under the custom menu. But no partitions were found. Perhaps the reason was the 32 GB mSATA with Intel rapid storage technology.
So I did exactly the following:
1. I downloaded the newest version of the IRST-driver and extracted the files to a USB device.
2. I booted from the recovery DVD (UEFI, safety mode: ON).
3. When it asked for the driver I installed the IRST-driver from the USB device (AHCI, 64 bit, located in the driver-folder - the only words I recognized from the forums... 0:).
4. A total of six partitions were shown: Partition 1 ("ESP", System), partition 2 ("DIAGS", OEM (reserved)), partition 3 (MSR (reserved)), partition 4 ("WINRETOOLS", recovery), partition 5 ("OS", primary), and partition 6 ("PBR Image", recovery).
5. I followed the instructions in the link (above) and deleted all of the partitions.
6. I installed Windows 8 on the new partition, without further complications.
7. I ran Windows Update.
8. I installed the Dell drivers for this service tag, in the order specified by Dell, starting with chipset, card reader, IRST, audio, video, network and everything else, and with a reboot between every single driver installation. The system, including the IRST, seems to work fine so far (no exclamation marks in the Device Manager).
9. I replaced some of the software, including Dell Backup and Recovery.
I started Dell Backup and Recovery and the program initially told me that it couldn't find a recovery partition, and therefore couldn't backup the system. Other programs in the Control Panel, like File History and Storage Spaces, can't find available drives.
The Disk Management tells me the following about my 1 TB HDD:
EFI System Partition 100 MB - Recovery Partition 898 MB - Primary partition (NTFS, boot, page file, crash dump) 930.11 MB - Recovery OEM partiton 300 MB - Recovery OEM partiton NTFS 300 MB
So finally to my questions: Should I have kept one or more of the recovery partitions during the Windows 8 installation? Could this affect Windows' System Restore (I guess not since Windows creates its own recovery partitions)?
And finally: Is Dell Backup and Recovery any useful? I already have the recovery DVD in case I need a factory reset. For backup purposes I will use a cloud service, and maybe a NAS in the future. Do I even need a recovery partition?
I have a Dell Inspiron 15R SE 7520 laptop that came with Windows 8 Core edition pre-installed. This laptop has never worked properly for some reason. It won't shutdown the normal way (it'll just stay on the shutdown screen forever) and it never comes back from sleep without a BSOD along with other troubles that haven't been solved by updating drivers,etc.
I decided I want to do a clean Windows 8.1 re-install and upgrade on my laptop to get rid of these problems, but it's been ages since I last did this (back in Win2K times, I used to dual boot Slackware Linux) and I've bee reading about all this UEFI, Secure Boot,etc and quite frankly it's making me quite nervous. I was even planning on taking this chance to dual boot some linux distro, but it looks sooo difficult. Things are much more complicated these days for the tinkerer!
I need to make sure I can get back to a running system quickly.
For starters, here is how the hard drive is partitioned: [URL] ....
And this is the Diskpart output : [URL] ....
Why do I have 5 partitions? I understand the recovery partition, the OS partition and (after lots of reading) the ESP partition, but I'm not sure about the others. What do I need to keep? I've been reading around and I see some people recommend wiping the whole drive and starting from scratch. Is this a good ide?
I'll create the installation media from a windows 8.1 MSDN ISO using a USB drive. When I start the installation process it will ask me where I want to reinstall it to. Do I just choose the OS partition? Won't the recovery partition be based on a Windows 8 image and be useless from now on?
What's the best way I can get back to a fully working system in case I screw up somehow? I've made an image of my drive using Macrium Reflect free edition. But I read here that I cannot make an image of a GPT disk. Will this image I made work for getting back to a working system quickly in case I screw up?
As a last resort, I've made a Recovery USB using the Dell Backup and Recovery Method. In the extreme case that I screw up real bad, will this work to get back a factory-state system even if I've wiped my hard drive clean? I'm assuming this tool is for users recovering after a dead hard drive so it should work , right?
We bought some DELL Optiplex 3010 with Win8Pro OEM licenses.
But we only have WinXP or Win7Pro computers on our company. We want to make a Clean installation with Win7Pro DVD on each machine, and use OEM license.
How to do this? Now OEM licenses are not shown outside computer.
Bought a Sony Vaio Pro 13 and as per usual with all my new laptops, a fresh install is done.
So on i went armed with my USB with Windows 8 created from an iso file from the microsoft site (i have msdn access).
The iso is a "multiple version" iso which has Windows 8 and Windows 8 Pro (en-gb_windows_8_x64_dvd_915412.iso)
Normally i would expect at the end of the install for the screen to allow me to enter my serial which in turn actives/deactivates features but for some reason, it has not this time round.
instead, the properties of my computer suggest a serial has already been entered "Current product key" *****-66ABC
Now i know i can "add features" and enter the serial that way but my question is, where is it picking the old serial from? i can only guess that the old serial is the one the laptop came with which is Windows 8 and not Windows 8 Pro.
The install was normal in terms of removing all partitions ( left the windows re and the sony recovery) so is it picking it up from there somehow?
I have a Dell Studio XPS 9000 running Windows 7 home premium 64bit and a USB 3 card installed. I want to upgrade it to Windows 8.1. I also have an HP laptop Envy dv6 running Windows 8.1 USB 3 compatible. I also have an Intel SSD 335 Series 240 GB, on which I want the upgrade to be installed, and a USB 3 NexStar caddy.
I imagine the most elegant approach would be to load Windows 8.1 on the SSD via the caddy connected to the HP laptop which is connected to the Internet, and then install the SSD into the Dell Studio XPS 9000.
With MDT 2013, Windows ADK and the Windows 8.1 Update 64 bit (multiple editions) MSDN ISO, how do I create an ISO that allows no more insert the serial number of the Core edition during the its installation?
View 9 Replies View RelatedI installed W8 successfully about a month ago and all went well. The only recent change I have made is to install Startmenu8 to get a more normal Windows look. Last weekend my computer screen went dark blue and the mouse seemed not to function. I changed batteries and rebooted. However all I got was my desktop with no task bar and no icons. The programmes showed up along the bottom but would not open maximised so I couldn't use them. I have run the diagnostics on F12 at start up. All was ok according to that. I wanted to restore to a previous point so I managed to boot from my CD drive with the recovery disk (W8 version) but it said that both my restore point and image wouldn't work. I therefore tried to do a clean install of W8 but that wouldn't work. It just hung after several hours. I tried the same with W7 but with the same result.
My machine came with Vista so I installed that from the Dell recovery disk. This worked. I then tried to upgrade to W7 SP1 (an upgrade which would never install back in the day) from a CD I downloaded off the Windows website. That went on all night with the machine interminably rebooting. Still hung this morning. So I reinstalled Vista as above (clean) and tried to install W7 from the original upgrade CD. This hung also. The reason I haven't gone straight to W8 is that I think I have an image from a few months ago before I upgraded to 8.
I've just started restoring from a reasonably W7 image in Vista. Cross fingers but it seems to be working. However, I wanted to do a clean install and wonder why neither W7 nor 8 would complete.
is there any way to know the serial number of my pre-installed windows 8 ??
View 9 Replies View RelatedMy mother bought a samsung notebook, which came with Windows 8 original version installed. There is a adhesive for windows 8 confirmation on it. I can send a video of it, but I wanted to change it to Windows 7, installed on my computer that I was used to. So, I made a backup of my Windows 7 and tried to install it on my notebook.
Unfortunately, I deleted all from the notebook and forgot to take the serial key or to change my partition table from GPT to MBR, so I can't install Windows 7.
I only want to recover my Windows 8 serial key, so I can re-install it , change the partition table to MEG and install Windows 7!
I bought an acer laptop with windows 8 installed.
How to know the serial number of my windows 8?
My computer came with Windows 8 (non-pro) preinstalled and I would like to do a clean reinstall of 8.1 on a new hard disk.
Since there is no OEM key anymore, what should I do to activate once the OS is installed?
With MDT 2013, Windows ADK and the Windows 8.1 Update 64 bit (multiple editions) MSDN ISO, how do I create an ISO that allows no more insert the serial number of the Core edition during the its installation?
View 8 Replies View RelatedOEM keys pre-installed in the my laptop as i too want to clean install windows 8.1 also my os was windows 8 Single Language and i have a 8.1 Pro ISO
View 2 Replies View RelatedLet's say your computer comes with Windows 8 (not 8 Pro) preinstalled, using a SLIC and not a product key. Yu decide you hate the OEM crapware and want to do a clean reinstall. Bt you don't have reinstallation media, or the media includes the crapware.
View 9 Replies View RelatedI tried to install Windows 8 Pro on my Dell PC, but I didnt know the clean install was the best way to go and now my computer will not boot to the OS. It boots then goes black.
View 3 Replies View RelatedI need to install windows 7 32 bit over Windows 8 64 bit but so far I have not been able to format it or wipe over it as most of the programs like hiren's boot disk and kill disk and all the others that I have tried are 32 bit programs and Windows 8 64bit will not even boot off of them.
View 4 Replies View RelatedHow windows 8 works now without the sticker key on new laptops. I've searched all over the internet and all I can find are dumb articles telling users to use the manufacturers recovery image. How to do a CLEAN install of Windows 8.
My new windows 8 has NO sticker key on the bottom so my understanding is that it's stored on the bios? Is this correct? So my question is, is if I get an ISO of windows 8 and install it, will it automatically recognize the key or is the key only set up to be recognized by the PC manufacturers crapware filled image?
ALSO, if thats the case, can I use a 3rd party product to pull my key and then use that with the clean ISO? Lastly, where can I download a clean ISO of windows 8? I know you can download official windows 7 ISO's, but i cannot seem to find an official windows 8 iso. I have no desire to download a torrent or from some shady website, I just want an official ISO.
I want to know if it's possible to create a clean install DVD.
with pre-installed Windows 8without product key (when I buyed the notebook Windows 8 was already installed - the personal product key is "inside" the notebook).
By the way, can I include the Windows Updates in the install DVD somehow - (and programs which should be pre-installed)?
I have made a clean install of Windows 8 using USB and UEFI. Somehow it seems the instalaltion is not quit right of what I have read... Have attached picture of the Diskmanagement (OS is Norwegian by the way).
Compared to this thread: UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with for me something is missing/wrong.
I have a laptop with one SSD and two internal disks. Both internal disk were removed before the installation, and connected and formatted after finished the installation.
It can me mentioned that I downloaded the OS, saved it as .iso file, then copied onto the USB disk. Then connected into the laptop and booted from USB/UEFI.
I did not follow these steps: UEFI Bootable USB Flash Drive - Create in Windows
I bought an acer 756-2808 netbook last year with windows 7 from Amazon. This netbook came with a "upgrade to Windows 8. SoI did the upgrade when it was released.
Sadly, I probably only used netbook for a month or two because the LED screen cracked. They are pretty fragile.
Then, I upgraded to 8GB ram. This thing flies!
I downloaded 'produkey' from nirisoft.net, because I can't find the product key anywhere for the life of me.
So, now I have the product key for the current windows 8 installed. Will this upgrade product key work for a clean install? Moving on, I ordered a Samsung 840 Pro 128 GB which should be arriving in a few days.
Finally, I want to do a clean install of Windows 8.1 using a Windows 8 Product key. Is this possible? The original HDD on this netbook has nothing on it, so I don't really have to back anything up either (like I said I barely used it for two months before the screen cracked!)
I did some searches and found this link: [URL] .....
So if the above step is correct.
Do I:
1.) Get the ISO on the USB following the steps mentioned in the link above.
2.) Take out old HDD and install new SSD
3.) Reboot computer with USB
4.) ?
5.) ?
6.) ?
etc.
Are these steps incorrect?
Does the retail channel keys of Windows work on Windows 8.1 RTM clean installation?
View 1 Replies View RelatedI built up a new PC featuring a brand new SSD (i.e fully unallocated). Then, I made a clean install of Windows 8.1 pro (64bits) using an ISO DVD. Using Windows disk management tool after the install, I can see that only two partitions have been created: one System partition in NTFS (350MB) and the remaining of the SSD is the C: partition while I was expecting a third one : a recovery partition. Of course, I do not remember a prompt during the install to ask whether I want a recovery parttion or not.
Is it normal ? Is a recovery partition useful knowing I have the install DVD ? If the recovery partition has some advantages, is there a way to create it after the install is completed ?
I have upgraded my system from windows 7 to windows 8 through digital delivery (no dvd). later it was upgraded to 8.1 pro now its in 8.1 pro with media center. Now i want to do a clean install of windows 8.1 pro with media center but i have no media, i have only windows 8 purchase product key and current product id.
View 9 Replies View RelatedSo my windows 8.1 installation became corrupted, so I backed up data and did a clean install after deleting all partitions.
After the install on the first boot, right after the process of "installing apps", it showed an error message saying an error occurred causing windows to restart, and created a memory.dmp file.
I just want to make sure this installation is stable before continuing to update to 8.1, especially after my previous issues. There are also some errors in the event log that I don't understand.
The errors came after install of Windows 8, as that was the key I had.
Windows failed to download and install 92 updates with error code 80248007
I upgraded to Windows 8 from XP via unlock key without CD, forgetting that it'd be 32bit too.. I'm making a rebuild soon and I think 64bit would really benefit me, apart from some programs I use that are being discontinued in 32bit. A friend of mine recently upgraded to Win 8 too, but he bought the CD. Could I use his CD to overwrite my Win 8 32bit with a 64bit one? And another question: if I could (and I hope I can) is there an option during install to leave some free space for Linux? Having Windows 8 only is not safe ..
View 7 Replies View RelatedAfter BIOS page passes, it loads for 10 seconds and crashes. Error screen disappears too quickly so can't take note. This is a new laptop.
Have tried 64 bit Windows 8 ISO and from Flashdisk.
LENOVO IdeaPad V480 161
I recently bought a new SSHD for my laptop and after initial problems with trying to install Windows in UEFI, I turned to Legacy and that worked. But now when I change it to UEFI, it just comes up as "Operating system not found".
View 1 Replies View Related