Windows 7 Wont Print Even With Xp Installed?
Jan 16, 2012
computer it does not work on is a hp pavilion 9655eathe video card burnt out sent it back to hp and they fixed it and i installed windows 7 on it from vista becuase of bugs and drivers and now printer does not work on xp as well as ive tryed that. but for some reason it works on ubuntu(linux)ive tryed the hp disc and site for software/drivers, works on my desktop and laptopalso tryed maping it from other pctryed other printer as well did not work
View 5 Replies
ADVERTISEMENT
Nov 15, 2011
My hard drive (MS Vista) had to be replaced so I had "Windows 7" installed now I can't print anything from the internet. Each time I try I get this message."An error has occurred in the script on this page". [code]
View 1 Replies
View Related
Feb 25, 2011
I recently upgraded my router to a Netgear N600 from a Netgear N150. I have an HP Photosmart Plus B209a-m wireless printer that was working with the N150, but is not found/recognized by the N600. I printed a wireless network test report, and it reads that the Network Name (SSID) Found...............FAIL. I am not certain how to remedy this.
View 6 Replies
View Related
Oct 13, 2012
My printer suddenly stopped printing and each time I give the command to print, the response I get is that I should instal a printer.
View 1 Replies
View Related
Mar 27, 2012
why is that my printer does not print and have it drivers installed
View 2 Replies
View Related
Mar 29, 2012
Printing's been working fine up until about a week ago. Suddenly I'm unable to print out of chrome. Whenever I try to print I get an error that says "Printer not Installed" in the browser. I disable the "print preview" chrome has recently implemented but that doesn't work. I reinstall Chrome to no avail. I try to print in Firefox and get a different error... "An Error Occurred while Printing." I do some research and then realize I can't print out of Acrobat Pro. My print settings dialog in Acrobat is unlike any I've ever seen and no options work. I can't change the paper size or access the printer settings from the Acrobat Print Dialog.
Steps I've taken so far:
Reinstalled the printer
Restarted Print Spooler
Deleted the Port
Reinstalled Printer again with new drivers
Successfully Printed Test Pages after each of these steps. Still could not print out of other programs.
Successfully Printed out of MS Word
I logged in under a different user and was able to print out of firefox.
View 2 Replies
View Related
Sep 25, 2012
I've been using various print drivers for various locations with success for a month with my new laptop. Today, all drivers gone.Loading new ones doesn't work. Print spooler is not "started;" it starts successfully, then is not "started" next time I look.Other possibly relevant information: HP 1020, HP MX 340 at home office.Tried: multiple restarts of print spooler, multiple reboots, troubleshooters, HP detect and download drivers?
View 5 Replies
View Related
Feb 11, 2011
(Windows 7 Home Premium 64-bit, HP LaserJet CP1215)When printing from Word (or any other normal application) the documents just sit in the print queue with Status = "Error - Printing".If I stop, then re-start the Print Spooler service, they then print.Strangely enough, this does not happen if I print from the HP printer diagnostic utility.I've done complete re-install of the entire printer driver suite and I'm pretty sure everything that end is OK. So what's happening with the spooler? The error message isn't exactly very revealing
View 9 Replies
View Related
Mar 30, 2012
My HP 6500 all in one will print test pages but will not print from my computer. It worked fine up until a week ago?
View 2 Replies
View Related
Jan 23, 2013
I'm on Windows 7 and have run into the annoyance of my PrtScn key actually bringing up the print dialog box to print. It still copies the screen to the clipboard for a paste into paint, but I can't figure out why it's bringing up the dialog to print or how to turn that off. I have seen it before maybe 8 years ago on Windows XP but do not remember what was done to correct it. When I try to search, I just find posts about it not working or how to turn the whole screen capture function off for the PrtScn button.
View 4 Replies
View Related
Nov 19, 2011
i had installed windows 7 in my laptop,but accidentally i installed it in D-drive,now both C & D drives are showing program files,program files x86,windows folders,my D drive is full
View 1 Replies
View Related
May 3, 2012
i have hp laserjet 1300n printer.i cant print with window 7.
View 2 Replies
View Related
Aug 17, 2011
I got a new PC at work that has Win7 Pro 64-bit (SP1) on it. Unfortunately, my printer (an HP Laserjet 1000) doesn't support 64-bit and it won't install.
So I created a Virtual PC with XP Mode and installed the driver there. I was able to print from within the VPC XP mode. But here's the problem: I would like the ability to print something from Win7. Is it possible to print something from Win7 so that it goes to the VPC printer even though the printer isn't installed in Win7? If so, can ya dumb down the instructions for me?
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Professional , Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 1995 Mb
Graphics Card: Intel(R) Q45/Q43 Express Chipset, 773 Mb
Hard Drives: C: Total - 152485 MB, Free - 112861 MB;
Motherboard: Dell Inc., 03NVJ6, A02, ..CN7360409R0636.
Antivirus: Microsoft Security Essentials, Updated and Enabled
View 10 Replies
View Related
Nov 26, 2012
how do i enable print key in windows seven
View 4 Replies
View Related
Jan 16, 2013
I am working on my nephews laptop which came with Win7 64bit and I installed a usb connected HP4500.all-in-one which was working until recently. It shows under printers as the default and i can use testprint from the properties screen which works fine and prints OK. However, I cannot print with any of the apps like wordpad,acrobat,word 2007 etc. It flashes and disappears and nothing shows up in the print que. I have tried uninstalling and reinstalling with new drivers I pulled from the HP site but still get the same result. Once in a while an HP4400 device shows up which apparently was loaded initially and deleted. I think perhaps a windows update has left something else as the default device
View 2 Replies
View Related
Jul 1, 2011
I have managed to set up my CP 3525 printers by using the install disc. However when i attempt to install drivers for my 3000n, 3600n and CP2025 printers, after downloading from HP website as i don't have discs, i just get a message 'unable to connect to printer'. I can set up the 3000n as a local printer over tcpip using the same ip address as the network printer and this works as a clumsy work around but i need to be able to manage printers from the server on my 64 bit systems going forward.
View 1 Replies
View Related
May 3, 2011
I have a Desktop....
Running Windows 7 Ultimate 64bit
Windows Firewall
Homegroup enabled for files and printers
A Dell Photo Printer 720 with Vista 64 driver - USB Connection - Working fine
Connected to a wireless router
on the other-end..
I have a Laptop
Running Windows 7 Ultimate 32bit
Windows Firewall
Homegroup enabled for files
Vista 32 drivers for Dell printer
Connected to the same router
I can trade files between the two no problem, but can't use the printer from the Laptop I've tried everything i can find Disabled Bi-directional printing Got rid of other firewalls Try Adding a printer both ways..Over a network, it see it, but says "Windows cannot connect to the printer"as a local printer, with port \desktopdell photo printer 720 The printer seems to install this way, till i send a test page It sits in the Laptop Queue for a bit, then disappears, but doesn't show up in the Desktop Queue and eventually get a dell photo printer message saying Communication Not Available (from the laptop) If I open a window and go to \desktop I can see the printer and the shared folder I can access the folder ok, but if i right click on the printer and pick Connect, "Windows cannot connect to the printer" Both computer are set to Workgroup?
View 7 Replies
View Related
Oct 19, 2009
My network at home is a mix of Mac's and PC's. So when I decided to start messing with Windows 7 on the box that I was using for print sharing I as well as file sharing I didn't realize that I would have such a hard time using my Win 7 box to share printers with my Mac's. Has anyone else had any experience trying to share on win 7 box to Mac's? I have been able to find shared files but for some reason my Mac's will not find the printers?
View 8 Replies
View Related
Jun 17, 2011
I have D-Link DPR1061 print server, but it does not work on my win7 64 bit PC.
View 1 Replies
View Related
Sep 29, 2011
could not print to hp lj1007 from win7 64 bit.
View 1 Replies
View Related
Jan 28, 2012
Reinstalled Win 7 now HPC5580 AIO will not print, New drivers downloaded, diagnostic prog in both HP. will print diagnostic page, but nothing else. BTW Quicken will print using NE01
View 2 Replies
View Related
Jul 1, 2012
My printer with the duplex accessory works fine in Win XP. Windows 7 does not recognize the printer can duplex & does not give a way to enable it.
View 1 Replies
View Related
Dec 23, 2011
How do I print from my Dell laptop with Windows 7 Pro OS to my HP Laserjet 2100 printer? I must use the USB to Parallel Port cable. I keep getting an error message.
View 4 Replies
View Related
Jun 14, 2012
I use Windows 7 Pro 64 bit and have a Brother HL-1440 installed which has been working fine. I recently had to go out of town with my laptop that has the brother printer installed, but did not take my printer with me. A friend lended me an HP laser jet 1022n to use since I forgot my printer. Apparently this printer is so old that when I plug the usb cable into my laptop windows 7 doesnt not find a driver for the printer automatically. So, I tried downloading from the hp site and had issues installing the driver.
Lastly, I went to devices and printers > selected Add A Printer > Then add a local printer > Then I select a usb port to connect >I selected what I thought was the correct driver from the list and finished the set up, but when trying to print a test page it would not print. So, I tried adding a printer again and this time selected the correct printer driver with the usb port. So, I am able to print now but when I go devices and printers I notice that it shows the first wrong driver i installed showing as my brother printer. when I look at the properties from right clicking the printer there is a drop down that shows all the drivers i have installed and shows the driver for my brother printer, but when I look back at devices printers it seems to show my brother printer icon named the wrong print driver i installed, basically my brother printer shows with the wrong driver i first installed.
I'm worried that my brother printer wont work now. How can I delete un needed printer drivers that are on my laptop so that only the drivers i need are installed?
View 1 Replies
View Related
Aug 8, 2012
My Dell Windows 7 now cannot print or add a new printer. When I try I receive a message" Windows can not add printer the local spooer service is not running. Please restart the spooler or restart the machine." Been on services and trying other things with out a printer.
View 14 Replies
View Related
Apr 27, 2011
I am unable to print after using Windows Fax and Scan. I get the message saying that it can not access the documents folder.
View 2 Replies
View Related
Jan 26, 2012
I have a new computer with Windows 7. As of yesterday the print spooler keeps crashing. Of course the user cannot print.I can restart the spooler, but it crashes when trying to print or trying to open a printer.
View 7 Replies
View Related
Jun 25, 2012
It has been a while since I have been here. I am sure my PC has some hidden Registry problem, but I cannot find it. Hardware: HP 8440P, Windows 7 64 bit.
MacAffee found no viruses, but of course my kid was playing on the machine and I am sure he clicked "yes" on some webpage.
The Registry for the Print Spooler keeps shutting down. When I attempt to print from Micorsoft Word, it shows my HP1018 printer as not really being a printer. I checked the Print Spooler and attempted a restart. It restarts fine, but then when I attempt to print from Word (or any MS office program) the Print Spooler shuts down. Same is true with adobe acrobat reader.
My guess is something corrupted the Registry to screw with me.
View 3 Replies
View Related
Oct 15, 2012
I have a Windows 7 Home Premium 64 bit computer which I will call the main PC. An HP LaserJer is directly connected to it, and shows up as the default printer. About a month ago, it stopped responding to print jobs. They show up in the "jobs pending" list, but do not print. If I try to print to that printer from another PC on the network, the document shows up in the pending list, but then says "Error" and will not print either.If I connect the printer to a different PC, it will print. If I try to print to the printer connected to another PC from the main PC, it will not print. The print spooler is running. There are only restore points from the past week or so, and this started happening over a month ago
View 2 Replies
View Related
May 3, 2012
I have a HP PSC 3550 connected to my Mac and I have successfully added this printer to Windows 7.
I am able to print a test page from Windows 7. I am able to print from Openoffice. However, I cannot print from Wordpad or Notepad.
This is the event log entry:
The document Untitled - Notepad, owned by Mark, failed to print on printer \MACS-COMPUTERHP PSC 2350 series. Try to print the document again, or restart the print spooler. Data type: NT EMF 1.008. Size of the spool file in bytes: 1184. Number of bytes printed: 0. Total number of pages in the document: 1. Number of pages printed: 0. Client computer: \SEGO. Win32 error code returned by the print processor: 0. The operation completed successfully.
Note that if I connect the printer directly to my Windows 7 machine I can print from Wordpad and Notepad.
View 3 Replies
View Related
Mar 17, 2011
I'm using Win 7 Pro logon as user with administrative credential. I need to do printing in DOS mode. The Case is : I type Net Use LPT1: \printserverp1 in DOS mode, it displays the command completed successfuly. The connection was made when I look at it again by using net use. But when I send a command 'dir/w > lpt1 ' in dos mode, it shows access is denied. It doesn't allow me to send a print job
View 2 Replies
View Related
