Windows 7 System Does Not Boot Probably Because Of File Corruption
Nov 7, 2011
My windows 7 system does not boot probably because of file corruption. Recovery console(repair) cannot fix system to boot and cannot tell what is the problem. I have a OEM installation disc(Premium x64, bought from shop no withing machine) and it seems that I should be able to boot system if I want to start upgrade install. I would like to repair system and preserve installed programs. The problem boot disc can be read and write ok when it is installed on other system. Is there any way I can repair my system?
Recently i've run into an issue with a particular boot file or driver "wdf0 1000.sys" getting corrupted. The first time I didn't know what caused the issue due to start up repair not working, so I did a clean reinstall of Windows. This time I backed up everything luckily, because sure enough it happened again, but this time I was able to see the problem. I want to know if there's a way to prevent that driver/file from messing up, because it will be a real annoyance to have to restore my back up over and over again.
And I have no idea how. I noticed that iTunes deleted more then half of my photos off my ipod, but didnt think anything of it, and then i started yahoo messenger and it said it was corrupted and to run a chkdsk. So I did, and this is what it came up with (below). What caused this? All my photos are back, it said it was recovering orphaned files and stuff. But there was too many to count. [code]
I have moved to Windows 7 Ultimate x64 for almost half a year, recently my hard drive was getting full and I decided to move some of the data to usb external hard drives. Both the externals I have are IDE hard drives and both are NTFS. I always use Quicksfv to make a CRC check file before I transfer the file and then run the CRC check after its been copied over to the external drive. I have used these externals in the past with Windows XP and had no problems.
However, on Windows 7 when transferring large files (usually over 1GB in size), I get corruption in the files. The corruption occurs randomly, if I recopy the files again it might be corruption free. This only occurs when copying files from internal to external, if I copy files from the external to my internal there's no corruption at all. I have tried changing the usb cables, power cable of the externals, using different usb ports but none of it helped. I scanned both externals with chkdsk and I used memtest+ for over 24hours and all the tests passed fine.
I have Win7 on NTFS, Ubuntu 10.04 on EXT4 and a third partition for general data with both operating systems can access.The third, shared partition is in FAT32.I have had this set up for years with no problems. Recently, I have found that files that I use, move, etc on my Ubuntu sometimes become corrupted. It is very occasional but is occurring more regularly. I use many files (obviously) but only a fraction of those appear to suffer with the problems. The files are generally left irrecoverably corrupted. It is only files that are stored on the shared FAT partition that become corrupted.All partitions are on the same drive.
To solve the problem, I reboot into Windows and sometimes CHKDSK does it's thing and sorts it all out. However, when CHKDSK does not run, the files are irrecoverably gone. CHKDSK says there are orphaned files, removes and recovers them. Sometimes, a file which has been deleted on on Ubuntu may then cause CHKDSK to scan, find and remove the file (or more particularly, sets all affected sectors to null). I can't quite place the error. Possibly in a ageing and failing Hard Drive? The Laptop is circa 3 years old-ish. I would say that combining file systems is an invitation for trouble - but genuinely I have never had any problems with it before. Sometimes I access Ubuntu when Windows is suspended which I feel may cause Read/Write collisions at OS level but if that is the case, surely it should prevent me accessing the file, rather than permit it and then treat the sectors as bad?
I had a very strange problem today when I was waking my machine up from hibernation. Here's my set up:
Windows 7 x64 Windows 7 is on a SSD drive Apple Mac Pro
I also have two other drives in, one for OSX and one with an old Vista x64 on it. I mainly work in Win 7, I never shut this computer off, I just restart sometimes. But today I put it in hibernation. When I was supposed to wake it back up the win 7 drive had just disappeared. I booted in Vista 64 and had a look in the disk manager, it tells me that the SSD drive isn't initialized (see attached screenshot).
As you may guess I can't browse this disk, and it does not show up during boot up. I did try to start from the Windows 7 CD and do a recovery, but it can't find my Windows 7 installation and so I guess I can't repair. What I could try to recover? Since I can boot my old OSX and my old Vista I'm quite sure it's not the rest of the hardware, I figure it's the Windows 7 drive or maybe its MBR.
I had a file recovery malware infection that i first cleaned with malwarebytes antimalware. Then i ran hitman pro and then it said it would delete a volume boot record and to restart pc.
When i restarted pc it wont boot up now. It says a disk read error has occured press ctrl alt del to restart. I cant even restart with ctrl alt del.
I tried to do a system restore but there are no restore points shown. That file recovery malware hid a lot of files i think and it seems like the main disk drive is now drive H.
Essentially after a few years of using my current computer I wiped the hard drive and re-installed. I did a complete wipe by booting from my Windows 7 disk and then "Deleting" the entire Hard Drive before re-installing. Do not misunderstand I "Deleted" the Hard Drive contents, without "Formatting" using some advance options in the installation stage.After reinstalling Windows 7 I had numerous issues, such as my Integrated Graphics card acting faulty, causing GUI problems. I'v also had my network card fail and eventually it seemed the Hard Drive corrupted itself since Windows 7 refused to load. So Once again I wiped, reinstalled and it worked fine again for another 3 days or so before happening again, at which point I restored my computer to an earlier state, which happened to be before and update and it now works again. it seems they develop after a period of 3-4 days. My GUI is playing up and reverting back to the native settings and style. I also started my computer up and Windows ran a Hard Drive check for corruption and removed some files.
TLDR: Reinstalled Windows 7 numerous times and I'm still getting problems with various parts of the computer.
Note: I reinstalled "Drivers" necessary and updated them.
I was messing around with the partition editor in Fedora 14 and accidentally changed the file type on the boot partition. When I go through the startup repair and do the command prompt method, when I enter bcdedit I get the message "The boot configuration data store could not be opened. The system cannot find the file specified"When I do bootrec.exe /fixboot it give me this. "The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded an that the volume is not corrupted" /fixmbr says that it completes successfully btw.
First of all, I wasn't exactly sure where to post this problem, since I have been having so many (I think they're related), but I have been forced to reinstall windows twice now and the problems continue. The first time I reinstalled windows was only because I was having several problems with directx, file corruption, and failed windows updates. Some of my games would crash and give me errors referencing different directx files, and no matter how many times I reinstalled directx or the game itself, I kept getting those errors.
As for the file corruption, about every time I started my computer, it wanted to do a checkdisk, even after it had already done that and "solved" the errors.
The failed windows updates related to the .net framework 4.0 (Or something like that) causing the entire updates to fail every time I turned off my computer. For the most part I ignored this. So I reinstalled windows (first reinstall) and that seemed to solve those mentioned problems except for the checkdisk always wanting to run.
Fast forward a month to just the other day - I was actually FORCED to reinstall windows because it would not even boot up in normal or safe mode, and all my restore points had been deleted somehow. The problems started after I tried to install Terraria, which needed to install the .Net framework 4.0 to work. So once again, the .net framework was causing problems. I solved this by downloading some software that completely removed the .net framework (I think), and letting Terraria configure it itself. This worked, however after a couple hours of playing the game, nothing else did. I turned off my computer, and when I booted it the next day, windows wouldn't load. This is why I reinstalled the 2nd time. Now, I am having many more problems even after a fresh installation. I am getting all kinds of errors on corruption in certain files, my video drivers are failing to install, restore points being deleted, checkdisk is still trying to run (which I am letting it do), windows updates are failing, and both Chrome and Firefox gave me error messages like "Your profile could not be opened correctly" after I installed them. My 1TB hard disk still has about 300gb of space, so space shouldn't be the source of any those problems.
I don't even know where to begin solving these problems, so I am very tempted to format my hard disk. So my question basically is would just completely wiping my HDD and then reinstalling windows from scratch be a good idea, or is the problem beyond that?
I cannot boot into Windows because it says that the file /boot/BCD is missing with an error code of 0x0000007. If I run Repair from my installation disk and in System Recovery Options, it says that it has detected problems and asks if I want to repair it. The items it wants to repair are: " The following startup option will be repaired:Name: {bootmgr}Identifier: {9DEA862C-5CDD-4E70-ACC1-F32B344D4795}
The following startup options will be added:
Name: Windows 7 Ultimate (recovered) Path: Windows Windows Device: Partition=C: (476938MB) Name: Windows Recovery Environment (recovered) Path: Recovery9426aa67-30ff-11e0-a348-506313b5e718Winre.wim Windows Device: Partition=C: (476938MB)
A copy of the current boot configuration data will be saved as C:BootBCD.Backup.0002"If I click yes, it says that it cannot save the current settings for the BCD and refuses to continue. When I choose Startup Repair, it attempts to fix the problem but fails.
The problem details are:
Root cause found: No OS files found on disk. Repair action: Partition table repair Result: Failed. Error code: 0x3bc3
I think that this is because Startup Repair is trying to fix the thumbdrive that I keep my Windows 7 install files in. I am overseas now and as my computer does not have an internal optical disk drive and my external drive is back home, thus using my thumbdrive is the only way to access the repair console.
Fixmbr and fixboot work, but when I run RebuildBCD, it detects C:Windows as having a Windows installation, but if I type Y(yes) or A(all), it says that the requested system device cannot be found.
My Thunderbird 3.1.10 started acting weird last week and since then problems have been only increasing.Here is what I have been experiencing so far. Any subfolders created under Inbox to organize all the mail I have suddenly disappeared. The mail can be accessed through the Search function, but the folders are gone. Sent messages no longer appear in the Sent folder but still appear when I use Search.
Suddenly my Win 7 Home Premium x64 will not boot. The system starts, POSTs then loads the DVD driver, then the screen goes black (not blank but "lit up" black if that makes sense). Then nothing. If I use Hiren's boot cd I can boot up using the "boot from HDD" option fine and Windows operates normally. System restore to a previous configuration made no difference to the original problem. I cannot boot into Safe Mode. F8 just offers me boot order options.
- Running the Windows 7 DVD I find: "No operating system is listed on the Repair Windows option." - Running Startup Repair finds the following error: "the partition table does not have a valid system partition" which it claims to have repaired, but the error remains and Windows will still not boot.
I followed this advice: Boot 7 dvd to system recovery options command prompt. Type: Diskpart list vol (find the vol letter e.g C or partition number e.g. 1 for the system partition ) Sel vol C ( or sel vol 1, obviously use the correct letter or number) act exi
My system partition was easily identified and listed as healthy so I selected it and made it active. The problem still remains exactly the same. My system is self built just over a year ago, to my knowledge has been running fine, without any hardware issues. I'm prepared to do a clean install if that's what it takes but if there is a way to fix the partition problem without that I'd like to explore it first.
I have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
I have a strange screen problem with default UAC settings (and it often appears, to a lesser degree, during boot)
Black (or white) streaks, missing or broken lines when the desktop is dimmed to show a system message. If, in UAC, I choose "Don't Dim Desktop"... the problem goes away when messages appear. The regular desktop is fine. This only happens when the boot screens are shown, and when the UAC is allowed to dim the desktop.
I have an ASRock 4CoreDual SATA2, eVGA 7600GS on AGP (sorry, can't go to PCIe right now,) 2GB of ram. This happened under both the Win 7 Beta and RC1, which I'm running now. Any thoughts?
Did a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.
I have been having a bunch of crashes while playing games like Battlefield 3 and Wow. When I've played Skyrim and other games there have been zero crashes. Using WhoCrashed tell me about memory corruption, and doing Windows Memory check comes up with no problems detected.
GA-990XA-UD3 AX6950 1bg AMD Phenom II x 4 965 G.Skil 6b (3x2bg) RAM
So I received a solid state drive for Christmas last year and haven't had any luck with installing it. I'm doing everything I can to rule out that it was DOA considering that at this point it's probably past warranty and I don't really wanna drop the money on a new one.I've tried to replicate the crashes but have had no luck. There appears to be no conditions required for the system to crash, so my initial thought was some kind of hardware malfunction.
i have a problem with my year old desktop pc and random screen corruption when i startup the pc. sometimes it does it once a month, but in the last week its happened it every day. this is a video of what happens but its not always the same, but its always at startup. usually anytime upto and including the windows login screen, but never before or during the bios screen. once it corrupts i then need to hard reset, soft reset does nothing. also, after a successful reboot windows complains of a previous bluescreen. all drivers are up to date. nvidia_gtx465_corruption.3gp - Internet i`ve tried replacing the graphics card and i still had problems and i`ve reinstalled windows 7. i`m thinking the next thing is to replace the psu? whats strange is that it never goes wrong once windows is up and running, its only at startup. it also cause the external monitor (tv) to blank out and it freezes the pc ie caps lock,etc dont function. i`ve also tried it in someone else`s house with different monitor and the same occurred.
So I found a post on this forum with a similar problem. I'm trying to move a file that is larger than 4GB in size from my main hard drive to an external, and getting the error message in the title. The consensus on the other post was that the hard drive must have been a FAT format, and that too fix the problem either split up the file or reformat the hard drive as NTFS.Well, by all accounts, my computer is telling me that my external hard drive is ALREADY formatted as NTFS, but I'm still getting this error. I would prefer not to split up the file, but other than that, what are my options?
This is a rather hypothetical question - I'm wondering if there are "mods" of some kind for the Windows 7 file system which includes some more flexibility in the GUI.As an example - I have searched for but couldn't find, a feature where you right click on a folder... and click "dump contents into current window", a kind of unwrapping of the contents of a folder into the same window. It makes intuitive sense to me, if I have a physical folder, I can just open it and dump the contents out in front of me. Currently though, I need to open said folder in another window, and then transfer all the contents BACK into the (let's say higher directory) windowIs there any tweak that would let me accomplish this kind of (command line reminiscent) file management jiu jitsu?
What happened to SFC in Windows 7? This was a convienent utility in WinXP for checking and comparing the correctness of original files in an active XP OS with the original files installed.
I am trying to reinstall HP Phoosmart full setup in windows 7. Ihave downloaded the latest installation package frm the website but when I try to install it I get the message "The file cannot be accesed by the system". The file concerned is C:Program FilesHP(988329F4-A1A1-4D51-803C-EF2725A97627)gupauto. When I look for the file I can find it in the correct place.
The problem started when I had three updates that would not install at shutdown. I tried to run check disk and system file checker which neither would run initiallyCheck disk runs now and says there are no problems. SFC says "Window Resource Protection could not perform the requested operation." As for Windows update, I have tried deleting the temp update files located atC:\Windows\SoftwareDistribution\DataStore and \Windows\SoftwareDistribution\Download. I have also tried to Resource readiness tool as well as Microsoft Fix It for windows update. The fix it tool says it finds errors and fixes them but the problem is not fixed. It shows up every time I run the tool. Since deleting the temp files, windows update just says "Windows could not search for new updates" with and error code of 80070002.I suspected a virus at first but was unable to find anything with a full scan of AVG and Malware Bytes. Guess that doesn't mean there is not one.
I've been using win 7 ultimate (64bit) for almost week now. In that period I had one serious problem repeating 5 times if I'm not mistaken.
Message: "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume Data."
Volume Data is logical drive. Lots of personal data is stored there using WindowsXp. As soon as I installed win 7 and tried to move some data from System partition to Data partition my PC started having these issues. I've run some diagnostic tools that win 7 offers and learned that Dirty Flag bit was raised on logical drive. I've run chkdsk utility along with checking bad sectors and problem was fixed but only for a day. Problem usually arises when I try storing data on that drive. Chkdisk fixes this but on very short period of time. PC is year old and in that period I have never experienced any kind of trouble with HDD.
This message keeps repeating : A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Unknown Error Processor ID: 2
I have large amount of data stored on Data partition there for I'm not able to format that partition.
I want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
Less than a month ago I build a new rig, installed Windows 7 on my SSD and at a later time I attached my old 1TB large disk with still had XP installed on it.Windows is protecting this drive, all folders are flagged read only and I'm unable to remove the read only flag, each time I try, and check back after processing a job to un flag it, there still there.I'm able to delete files and folders after accepting the UAC popup, however, there are several folders I want to remove but am unable to, /Boot, /Documents & Settings, /Windows and some root system files, but windows doesn't let me.(I need to run programs with elevated rights in order to be able to modify those files) The /Boot is from an older Windows 7 install and it should be safe removing it, because I installed windows 7 on a SSD with out any other disks attached, so no dual boot stuff.But worst of all, many files are also flagged read only, along with my project files that I'm now unable to modify.What buttons do I need to press to get windows to understand he should not be protecting this disk and there ain't no windows installed on it so I can clean up get rid of those read only flags on the files
