I have a dell inspiron 560 with nvidia control panel just to let you know. im trying to hook up hdmi to my tv. ok when i go to start/control panel/sound it only show speaker. theres know hdmi to enable is there some way to get the hdmi panel to show up.
View 2 RepliesWhen I had Vista 64 bit before I upgraded to Windows 7 home prof., I could see what was on my monitor for the computer so I could watch a movie and just turn the speakers closer. Now after much experimentation, it will only show the background, no icons movies etc. on vga or the hdmi connection I just connected to my tv and the back of the computer!how to get me desktop's exact display over to my tv as well.
Amd Phenon -X$
Gateway DX-4300
ATI Radeon HD 4600 Series-Samsung.
A little problem regarding hooking an Asus EEE netbook up to a Haier HDTV/monitor via VGA. Last night, I hooked it up and all went well. My control panel showed me a wide range of resolutions that allowed me to view my entire screen and use the monitor without any problem.oday, I turned the computer back on, and upon switching over to the monitor, my control panel only shows the recommended resolution, which is nowhere near high enough for the monitor. Everything is huge and I can't see most of the screen.I've already tried the following:-Restarting both monitor and computer-Unplugging and plugging back in the VGA cable-Looked at the "show all modes" under advanced options in the display settings. The appropriate resolution was not there, either.
View 5 Replies View RelatedI have connected my hdmi cable as usual but this time i had on tv display NO SIGNAL. When i connect another pc to check the cable it seems to work correctly.The problem is coming from my pc.
View 5 Replies View RelatedI'm trying to hook up my TV with my computer, and for the most part it's working. The video goes through and I get how to control it and everything. The only thing not working is the sound.
I'm using an HDMI to HDMI cable, and like I said the video is fine. Also, when the cable is plugged into my boyfriend's laptop, the sound comes out of the TV.
So this must mean the problem is with my computer specifically. Although, this computer is only a month old, so I wouldn't think anything is out of date.
I would like to connect my laptop to the television both have HDMI connections will a hdmi lead work
View 1 Replies View Relatedhow can i get sound from my computer to my tv
View 1 Replies View RelatedI'm putting together a slide show of 3D images that I want to show on my TV next week when we have company.I would like the images to stay on the screen a little longer without having to actually create a slide show in some special application like Premiere.
The Slide Show function in Explorer works great if I can control the timing.
just completed a first-time new Windows 7 PC build. Successful installation of Windows 7 Pro on WD 600GB 10000 system drive. Went back and installed 4 additional HDD. (2) WD Caviar Black 1TB 7200 RPM and (2) WD Caviar 7200 500GB HDD from XP system that were used for storage.
BIOS sees all HDDs, but are not viewable in Disk Management.
System Specs:
Antec Nine Hundred
ASUS P6X58D-E MOBO
[Code].....
However, only three are visible in Disk Management. Missing (1) WD 500GB (previously used on WinXP system) and (1) new WD 1T.
he has a Dell Inspiron laptop Window 7 and a Samsung LED TV. I'm on port HDMI2 on the TV from the PC. I have tried everything but it says "source is not connected..." I tested the cable with the blue ray player and it works fine. I called Dell (still under warranty) an they were useless.I've checked the settings on the PC and I have it set to "extended" so I can see the monitor on both....no luck. Is it a setting on the TV that I am missing?
View 1 Replies View RelatedI was using my desktop like normal then an error came up saying that there was a hdd failure, and that i needed to scan for errors. all my files disappeared and only this error would come up. There would be hundreds of the same msg spamed on my screen. I scaned my hdd for errors using my Bios/Advanced options and no errors came up. I decided to take out the hdd and put it into my External Hdd bay to hook up to my laptop to extract the data off it.When i hooked it up to my laptop it showed up empty. I went into folder options and clicked on show hidden files and folders. Everything came up but it was grey/transparent. I then copied the files to another hdd for backup.
Then i formatted the hdd and put on a fresh new OS. Id like to mention i have a second internal drive that i use for backups but it wasnt backed up recently when this issue happen so i had to take out the main drive and use it as an external to back up onto another external drive.so then when i click on my second internal drive after the reinstall of the new OS it shows empty i have to go in and show hidden files and folders.. now they show again transparent. also i plug in my external to get the recent back up and all those files are still transparent when i move them to my desktop that is freshly OS installed they are still grey/transparent and i have to keep the show hidden files and folders to view them.. so its all my music, pics, documents etc they are all greyed out..i tried to copy my backup IE favs into my new IE browser and they wont show up because they are hiden it shows it copied to the favs folder but in ie i cannot view them if that makes any sense.
my blue ray only has one video out option -- (HDMI). My T.V. has 2 HDMI ports currently in use, and 1 unoccupied VGA (15-pin) connector port. What are my option(s) to connect if I want to use the VGA (15-pin). How do I know if the T.V. (3 year old 42" Sylvania) will accept using this port from the HDMI on my blue ray?
View 7 Replies View RelatedI am using a Laptop with a dead screen by running an external monitor from vga port. I am trying to duplicate this monitor on Sony HD tv using an USB adapter to HDMI. On the first go around I got my desktop ...minus any task bars or icons. on the Sony plus sound but could not get the complete desktop to display. (I am thinking now this might have been resolution trouble and my icons were just out sight) Videos play fine on vga monitor but see just windows logo on Sony.
When I go to display settings I see "1/2 multimonitors" and it shows the Sony as 3. That is when I get lost. If I click on identify it shows a giant " 1" and "2" on my vga monitor. at the same time. Then my choices are duplicate, extend, and show desktop. Which should I use.? I am not sure if my vga monitor is 1 or 2.
There is also a "connect to projector". I messed around there and killed the vga monitor (my only one) Had to restore in safe mode to get back to normal vga output.
Last night my new laptop arrived (XPS), still getting used to windows 7 etc... but i thought i would watch something through my t.v. Plugged HDMI cable in back of laptop straight in to t.v, changed the source and straight away i had a lovely sharpe picture of my deskop instantly.... or so i thought
im getting the middle part of my screen fine - but it is cropped so i cant see the tool bar (its too low) and the desktop icons are only veiwable if i move them closer in screen! Ideally i want to have identical screens on both so i can use both at sam time, but currently i can only view either or atm? and the t.v one being crop means i can use it as a computer (No toolbar etc..)
I could figure this out on XP but windows 7 seems beyond me atm!
I can`t get surround sound over the HDMI. I have tried old drivers, and forworth to the newest. Nothing gives me surround. I have a Yamahasurround reciver that gives me the sound. And it works anything else I have tried on it. Inside windows, if I trie to go to sound options, goes to configuration on the HDMI inside sound opt. I can`t get anything else than stereo.
View 8 Replies View RelatedI recently purchased a Dell n5010 and i cant seem to connect it onto my 40" Bravia HD LCD.i'm trying to connect it via HDMI.. but somehow the laptop doesn't seem to display on my Bravia.At first i thought it was the cable issue, but the HDMI cable works perfectly fine on the DVD player.
View 2 Replies View RelatedI tried to hook up my hdmi cable from my computer to my lg hd tv, but i get no signal, i tried detecting the tv but nothing came up.
View 9 Replies View RelatedLook worse than the VGA out on my laptop? The HDMI out has black bars on the left, right, bottom and top. The VGA looks crisp and clear and fills the whole screen on my TV.
View 3 Replies View RelatedI need a slpitter for a PC input that will slpit to 2 tv's. Does any ane know of a good slpitter thats works. It can a Machanical or automatic?
View 4 Replies View RelatedWhen I connect my PC to my TV Via HDMI Cable, my TV does not receive a signal. When I check in Control panel>Display>Resolution, My TV hasn't even been detected. My TV is an LG 50", Card is a GTX580, and my OS is Windows 7.
Also, when I connect my laptop to my TV via HDMI (Also on Windows 7), It is instantly recognised and automatically displays, so it has to be an issue with the PC itself.
I am trying to get audio from my PC via HDMI into my Marantz NR1402 AV Amp and then into my panasonic plasma.the plasma is picking up the desktop (so the signal is going thru the amp ok but the amp is not receiving any sound. In the Nvidea Control panel Set up Digital Audio it recognises The marantz under HDMI but in the configure section "open windows sound setting" it only shows speakers (not plugged in) & Digital Audio (S/pdif) Default device (i am showing hidden & disconnected devices).I have opened the pc case and noticed that I have a two pin cable from the 9500gt going to the Spdif on motherboard & a cable running from the soundcard to the front sockets on the pc case.
View 2 Replies View RelatedRight i picked up a pc that needed some tlc, tried installing windows 8 and get the error so installed windows 7.Quick breakdown:motherboard - k7s41cpu - amd seprom 2400+graphics card - powercolor x1950 pro agp 256mbHad a few problems installing the video card - but after going into bios and changing agp to 4x instead of 8x it now works great - full hd display using a dvi - hdmi 1.4v leadNow my problem is I cant get any sound, having read and read i now know there is sound output through DVI (19 pins video / 5 pins sound)My question is how do i enable the sound through my x1950 proI have tried installing the realtek hd audio drivers but it just comes back no driver installed.
View 9 Replies View RelatedMy motherboard has two seperate sound capabilities. The normal sound outputs [Jacks in the back, headphone jack in the front] and sound over the HDMI.I use our 37 inch flatscreen as my second screen, and if I put a Blue Ray in, the software asks me if I want to use the regular sound, or the HDMI [and the sound comes out my TV]
View 3 Replies View RelatedI installed Windows 7 yesterday and at first I had no audio to my TV via the HDMI cable. I adjusted the settings via the sound icon on the taskbar, playback tab, changing whether the speakers or the Digital Output Device (HDMI), Sigmatel High Definition Audio Codec was the default. Eventually I got it to work.
Today, however it has stopped working again and no matter what changes I make, nothing works. When I right click on the playback device Digital Output Device (HDMI) and choose TEST, I get the message: Failed to play test tone. All sound comes through the laptop speakers.
I went to device manager and checked the driver for the codec and it was up to date.
When I was using Vista, to get the audio all I had to do was plug in the HDMI cable and the sound automatically went through the TV.
Does anyone have any ideas how to solve this?
I am having trouble getting video when connecting my PC to my LG LCD TV via HDMI.When I connect the two via HDMI, the television displays "no signal" however when I go into the Intel HD Graphics utility, it recognizes my TV and shows information about it.I find this strange because, previously I have been able to connect the two without any issues.SpecsASUS K52 NotebookCore i3 350MIntel HD Graphics320 GB HDD4 GB RAM
View 10 Replies View RelatedMy HDMI abilities are only enabled when my TV is powered off, which makes no sense at all. How can I get it to work?
View 3 Replies View RelatedHDMI on my gts 250 not active
View 1 Replies View RelatedHDMI on my gts 250 not active
View 1 Replies View Relatedhow can enable hdmi
View 2 Replies View RelatedMy All in one PC Asus ET2400XVT has a HDMI-input port but whenever i try to connect it through a HDMI-HDMI cable to my ps3, it does not sense the signal. What can i do?
View 3 Replies View RelatedI have a 17R inspiron laptop and samsung laptop...hdmi connection worked before and now it doesnt.
View 8 Replies View Related