Appropriate Resolution Won't Show Up In Control Panel (Netbook To Monitor)?
Nov 28, 2011
A little problem regarding hooking an Asus EEE netbook up to a Haier HDTV/monitor via VGA. Last night, I hooked it up and all went well. My control panel showed me a wide range of resolutions that allowed me to view my entire screen and use the monitor without any problem.oday, I turned the computer back on, and upon switching over to the monitor, my control panel only shows the recommended resolution, which is nowhere near high enough for the monitor. Everything is huge and I can't see most of the screen.I've already tried the following:-Restarting both monitor and computer-Unplugging and plugging back in the VGA cable-Looked at the "show all modes" under advanced options in the display settings. The appropriate resolution was not there, either.
My monitor uses the resolution 1024 x 768, but this morning it's on 640 x 480?i try to change the resolution back, but the Resolution option is greyed out?A warning underneath says: If your resolution is below 1024 x 768, some items may not fit on the screen.
I use a lap top with an external monitor.In the Display Control Panel, there are THREE monitors listed:
-The lap top -The external monitor I use -Another monitor called "No Monitor", (excellent name!).
I've configured the No Monitor to the pull down option "Disconnect This Display", but it's still there. It's not a big deal, but I was just wondering if there's a way to remove it altogether.
I have 2xSapphire Radeon 6750 1GB DDR5linked with a Crossfire cable. More accurately, this card
Normally I have only two monitors connected, one on HDMI and one on DVI. Yesterday I brought home a third monitor just to test around a bit, to see if I could get a third monitor working. I had the cables so I tried connecting it to either DisplayPort, HDMI or DVI on either of the cards, alternating. So far I have failed. This is not really a big surprise since I got info from Sapphire telling me it would most likely not work, since the cards do not support multiple monitors beyond two.
The most surprising part was Windows. It tried to detect the third monitor as connected via VGA and extend desktop to it. I went along and played with the settings a bit to no avail. The third monitor (an older Eizo) does not have a VGA port.
So I disconnected it, rebooted just in case, and left the matter for another day. To my surprise, Windows still claims there is a VGA monitor, diconnected, but it is there. My display settings: And the "ghost" display setting: How do I remove this last entry of a monitor that is no longer connected??
nvidia control panel shows 2nd monitor as vga but is dvi and doesnt work it recognizes otherwise as fine in the windows settings and nvidia control panel it got reset ? after I woke it up from sleep how do i force it back?
When I go to Control PanelAll Control Panel ItemsNotification Area Icons dialog then there are a lot of programs which are already uninstalled.
How can I cleanup/delete all these useless entries? How can I delete ONE single entry manually?
Second question: Assume I want to hide icons and notification for mutiple/all entries (here approx 40 items) in ONE STEP.
Third question: How can I save/backup the current notification settings (for later restore) into a file? Are these notifcation settings stored in a certain branch of the Registry (which exactly) ?
I have a Lenovo G560 and i only see one account when i log onto windows whichs is mine but some how my boyfriend logs in without changing my password and now i am not theadministrator i cannot open change or delete a single fileing doesnt help. it says cannot find path or environment variables then it says contact system administrator which my account is. I cannot do a system restore cause it wont let me says denied
For some reason I can't view anything that is under the control panel as well as the control panel itself. I can open everything else fine such as pics, music, games, videos. But anything that has to with the control panel I can't see. The task bar says the folder is open but I see nothing.I have tried the following: ran sfc, it says nothing is wrong, tried to create a new user account, but I can't since it falls under the control panel. I tried to create a new user account through the guest account (I was able to make it an administrator) but it says I can't create a new account with special characters such as $=- etc... I didn't use any special characters at all so I don't know why it's saying that. It seems to me that this is a registry problem, and I'm a little uncomfortable with the registry and don't like to mess with it at all. Worse comes to worse I'm going to try to reinstall windows
cant install java. its missing from my control panel and eveytime i try to reinstall, site site gives me the java 160-31 update, when i try to install it, a dialog pops up promting me to search for the 29 update. i guess thats the 1 in missing cause the same thing happens when i try uninstalling 29 & 30 from my programs & features in my control panel. im running windows 7 home premium 64 bit and ie 9. i also use Google chrome.
I run a server from home and im thinking of giving a few of my very good and trusted staff members access to my server machine but would like to disable the control panel first.
Mainboard : Gigabyte GA-K8N-SLi Chipset : nVidia nForce4 Processor : AMD Athlon 64 3800+ @ 2400MHz Physical Memory : 4096MB (4 x 1024 DDR-SDRAM ) Video Card : NVIDIA GeForce 9800 GT (Microsoft Corporation - WDDM v1.1) Hard Disk : Seagate ST3320620AS ATA Device (320GB) DVD-Rom Drive : PHILIPS DVDR1640P DVD-Rom Drive : DVD-16X DVD-ROM BDV316C Monitor Type : VW222 - 22 inches Network Card : NVIDIA nForce Networking Controller Operating System : Windows 7 Ultimate Professional Media Center 6.01.7600 (32-bit) DirectX : Version 11.00
i have done a reinstall of windows 7 32 bit But couldn't boot from cd as usb keyboard would not work (can't get in to bios to change it)So installed windows in windows it was ok till i updated windows I must have installed on board sound and think it is now conflicting with my Xfire sound card Can't open Controll panel as Explorer shuts it self down And can't do a reset to another date as it says can' open a certian file How can i uninsall a program by not using c/p
Problem signature: Problem Event Name: APPCRASH Application Name: Explorer.EXE Application Version: 6.1.7600.16450 Application Timestamp: 4aeba271 Fault Module Name: CTMLFX32.dll
Alright, so it started around 5-7 days ago. Photoviewer started giving a message with this line,C:Program FilesWindows Photo ViewerPhotoViewer.dll is not a valid win32 application.Searched on google, first thing it said was to check if there's any viruses. I scanned it with super-antispyware and had one virus. Did the sfc /scannow and it says it couldn't repair some files (CBS logs are over 3mb ). Cleared the virus and after two days, most of the items in control panel doesn't do anything when I try to click on it (i.e Power Options, Backup & Restore, Firewall) or it gives the line,Windows cannot find '::{26EE0668-A00A-44D7-9371,Paint and opening other things through Start Menu gives this fine,C:Windowssystem32ODBC32.dll is either not designed to run on Windows or it contains an error
I've tried this twice now (on the same machine) and each time Control Panel won't work; it doesn't open. If I change the start menu to show links to Control Panel applets only some of them work; User Accounts, Display, Power Settings, Windows Update and others just do nothing. This means I can't adjust my display properties to get the correct alignment of my dual monitors, among other things, so I've given up on it meantime.
Has anyone else had this problem, or any suggestions on how to overcome it?
When I click on the control panel icon on my desktop nothing happens. When I click on start>control panel I get the same result. I have a power options icon on my desktop and that does not work either. If I right click the power options icon and choose open file location the control panel opens normally. Everything works fine in safe mode though.
i installed windows 7 and managed to get sound working but in windows xp i had this soundmax control panel wizard that let me configure standard sound jacks to 5.1.
i tried going to control panel > sounds > configure speakers but no 5.1 options.
I just finished my new build and everything was going along well when I loaded my drivers for the asus xonar essence st sound card. Now everything in the tool bar, but the start button will not respond and control panel is frozen. Control panel will load but takes 3 or 4 minutes and then is unresponsive. So I can't just uninstall and start over. Any one have any ideas?
my control panel is not on my computer when i enter my desktop. can you helpe get it on my desktop. i also want my pc to restore back to 13th of april?
Suddenly and for no apparent reason Control Panel will not open on my Win 7 64-bit computer. If I go to the Start Menu and click on Control Panel link there, an icon for the Control Panel appears on the task bar, but no Control Panel window is open! If I move the cursor over the icon on the task bar I can see a miniature version of All Control Panel Items, but NO LARGER CONTROL PANEL WINDOW will open. Weird. If I just try clicking on the task bar Control Panel icon nothing happens, unless I right-click on it and click <Close Window>, then it will close. Other links to the Control Panel also fail to open the actual Control Panel, and merely produce a task bar icon.
I have a dell inspiron 560 with nvidia control panel just to let you know. im trying to hook up hdmi to my tv. ok when i go to start/control panel/sound it only show speaker. theres know hdmi to enable is there some way to get the hdmi panel to show up.
I am using Windows 7 and have been having this problem for some time now..It seems that the control panel icon keeps showing up twice on my desktop toolbar and no matter how many times I delet it, it keeps returning..
Everytime I click on any item in the control panel the application freezes. What should I do?I have admin rights I am running Panda virus I can still access everything but I have to go the long way round.