Mainboard : Gigabyte GA-K8N-SLi
Chipset : nVidia nForce4
Processor : AMD Athlon 64 3800+ @ 2400MHz
Physical Memory : 4096MB (4 x 1024 DDR-SDRAM )
Video Card : NVIDIA GeForce 9800 GT (Microsoft Corporation - WDDM v1.1)
Hard Disk : Seagate ST3320620AS ATA Device (320GB)
DVD-Rom Drive : PHILIPS DVDR1640P
DVD-Rom Drive : DVD-16X DVD-ROM BDV316C
Monitor Type : VW222 - 22 inches
Network Card : NVIDIA nForce Networking Controller
Operating System : Windows 7 Ultimate Professional Media Center 6.01.7600 (32-bit)
DirectX : Version 11.00
i have done a reinstall of windows 7 32 bit But couldn't boot from cd as usb keyboard would not work (can't get in to bios to change it)So installed windows in windows it was ok till i updated windows I must have installed on board sound and think it is now conflicting with my Xfire sound card Can't open Controll panel as Explorer shuts it self down And can't do a reset to another date as it says can' open a certian file How can i uninsall a program by not using c/p
Problem signature:
Problem Event Name: APPCRASH
Application Name: Explorer.EXE
Application Version: 6.1.7600.16450
Application Timestamp: 4aeba271
Fault Module Name: CTMLFX32.dll
Suddenly and for no apparent reason Control Panel will not open on my Win 7 64-bit computer. If I go to the Start Menu and click on Control Panel link there, an icon for the Control Panel appears on the task bar, but no Control Panel window is open! If I move the cursor over the icon on the task bar I can see a miniature version of All Control Panel Items, but NO LARGER CONTROL PANEL WINDOW will open. Weird. If I just try clicking on the task bar Control Panel icon nothing happens, unless I right-click on it and click <Close Window>, then it will close. Other links to the Control Panel also fail to open the actual Control Panel, and merely produce a task bar icon.
I am running both the 32-bit Windows 7 OS on one machine and the 64-bit OS on another machine. Love it!, BUT on the 32-bit machine a lot of commands don't seem to work. For example, when I click on Control Panel nothing happens. Same is true with Personalize.
The sound CP functioned.I added USB headset--still functioned.I installed drivers for my X-Plosion--still functioned.Rebooted--no longer functioned.At this point I cannot access the sound CP, nor the playback/recording devices screens, though the devices all function correctly.
I have a strange problem where any subcategory links in control panel wont seem to open at all when clicked on. Everything else opens fine. For example, clicking on "System and Security" or "Network and Internet" works fine (the main categories) but if I try to click on "un-install a program" or "add a device" for example (the small text sub category links) they don respond with anything.I have tried Google searching for a solution but cant seem to find anything of use.
basically I am unable to open the Intel control panel on my Alienware M14X R2. Whenever I try to open it I get the following error: GfxUI.exe - .NET Framework Initialisation Error Unable to find a version of the runtime to run this application.So far I have tried uninstalling .NET framework and re-installing. Changing administrator rights to the appropriate files (now changed back to normal as this didn't work). Re-installing the intel drivers.I'm afraid I'm gonna have to re-install windows but before I do I was wondering if anyone could shed some light on this issue?
I can't open Mouse Properties in Control Panel. I click and nothing happens. I ran sfc /scannow but it didn't fix the problem. It found some corrupted files which it couldn't fix, but they weren't related to the mouse or control panel in any way I could see.
1) Asus Laptop Model UL50VT with Windows 7 Home Premium. 2) Hard Drive crashes dies, send it in and get it replaced. 3) Several months after getting the Hard Drive replaced (Yesterday) I noticed that my D drive had 350GB of memory as compared to about 150GB in my C Drive. This was a problem considering my C drive was nearly full.4) I decide to just put new files to the D Drive and that I will copy files over to the D drive to use it as my primary driver. I use Yahoo!Answers as my reliable source of information on all things registry. After following the instructions that I can no longer find, I edited several files in the registry, believing myself to have changed the primary drive from C to D.
5) ^^ The above instructions given were most likely from an epic troll. Everytime I open any System 32 file I get an error that Windows cannot C:/Windows/System32/Application I tried to open/etc... This includes, sadly, my regedit application.6) I copied my System32 folder over to my D drive and attempted to open the application from over there, but it has not worked.7) Many files on my computer are unable to be found by windows, System32 is not the only case. It appears to be somewhat random8) I tried as a cop-out way to fix this to create a new User Account, and that also failed... It simply will not open the Control Panel section for creating a new account.9) Lastly... and perhaps this was my stupidest mistake of all... I never created a recovery disk.
Recently I bought a Notebook and I want to change my display settings. I got Intel HD Graphics Family installed on my computer. When I got to the system tray and hit the Intel Graphics and Media Control Panel icon it should open the Control Panel window but nothing happens to me. I have read all the instructions that Intel has but nothing of these worked. Graphics — How to open the Intel� Graphics Properties window
I recently decided to reinstall Win 7 as it`s been about a year and things are starting to go a bit awry. For instance I can no longer open the Start Menu Control Panel without it hanging and having to restart Explorer. The real problem though is that my DVD drive won`t recognize formatted disks. If I put in a blank up it pops, but nothing else. Device manager says its all ok.
Windows 7 86. I have NO SOUND and my Realtek HD Audio will not open from the control panel. I have reinstalled the drivers and used system image to recover but it has not solved the problem. I have used this system image before and it work perfect. I think it is a hardware problem but how can I check this or what other option may I have not considered?
Programs won't open and whilst the control panel will open clicking any of the options results in it hanging, resulting in me needing to end the process in task manager. I'm in safe mode right now and no such problems are currently present. This is a newly built computer and the OS is installed on an SSD. After installing Windows I installed drivers from three CDs in the following order: graphics card, sound card, mobo/chipset. No problems appeared to occur. I think prior to installing these drivers Windows was okay as I recall looking up why my internet wasn't working(turned out I need the LAN driver from the latter driver CD)
I am unable to open "Uninstall a program" through control panel. Every time when I try to open it, I get the following error message"
"Windows cannot find '::{26EE0668-A00A-44D7-9371-BEB064C98683}...:{7B81BE6A-CE2B-4676-A29E-EB907A5126C5}' Make sure you typed the name correctly, and then try again".
However, I can open this in safe mode. Unsure why this is the case. I use Win 7 64bit.
I recently got a new laptop: HP Pavilion dv6-6b12ed
I have a Control panel from Intel where I could change the colors of my screen and other stuff, but I can't get it to open! Here's my weird problem: It shows in the system tray but when I click it I see this: [URL]
When I try to click on it, or anywhere else, it disappears and the program won't open. I've even tried ALL methods in this following link: Graphics — How to open the Intel Graphics Properties window
I think the problem will be solved if I can re-install the driver, but I've no idea what to (un)install. If you need any additional info on my system specs, just ask me or look up my laptop specs.
I am unable to open "Computer", "Control Panel", "Devices and Printers" or any of the other options when I click on the start icon in the task bar. I receive the error message "Server execution failed" I have Windows 7 operating system.
When I go to Control PanelAll Control Panel ItemsNotification Area Icons dialog then there are a lot of programs which are already uninstalled.
How can I cleanup/delete all these useless entries? How can I delete ONE single entry manually?
Second question: Assume I want to hide icons and notification for mutiple/all entries (here approx 40 items) in ONE STEP.
Third question: How can I save/backup the current notification settings (for later restore) into a file? Are these notifcation settings stored in a certain branch of the Registry (which exactly) ?
I have a Lenovo G560 and i only see one account when i log onto windows whichs is mine but some how my boyfriend logs in without changing my password and now i am not theadministrator i cannot open change or delete a single fileing doesnt help. it says cannot find path or environment variables then it says contact system administrator which my account is. I cannot do a system restore cause it wont let me says denied
For some reason I can't view anything that is under the control panel as well as the control panel itself. I can open everything else fine such as pics, music, games, videos. But anything that has to with the control panel I can't see. The task bar says the folder is open but I see nothing.I have tried the following: ran sfc, it says nothing is wrong, tried to create a new user account, but I can't since it falls under the control panel. I tried to create a new user account through the guest account (I was able to make it an administrator) but it says I can't create a new account with special characters such as $=- etc... I didn't use any special characters at all so I don't know why it's saying that. It seems to me that this is a registry problem, and I'm a little uncomfortable with the registry and don't like to mess with it at all. Worse comes to worse I'm going to try to reinstall windows
cant install java. its missing from my control panel and eveytime i try to reinstall, site site gives me the java 160-31 update, when i try to install it, a dialog pops up promting me to search for the 29 update. i guess thats the 1 in missing cause the same thing happens when i try uninstalling 29 & 30 from my programs & features in my control panel. im running windows 7 home premium 64 bit and ie 9. i also use Google chrome.
I run a server from home and im thinking of giving a few of my very good and trusted staff members access to my server machine but would like to disable the control panel first.
Alright, so it started around 5-7 days ago. Photoviewer started giving a message with this line,C:Program FilesWindows Photo ViewerPhotoViewer.dll is not a valid win32 application.Searched on google, first thing it said was to check if there's any viruses. I scanned it with super-antispyware and had one virus. Did the sfc /scannow and it says it couldn't repair some files (CBS logs are over 3mb ). Cleared the virus and after two days, most of the items in control panel doesn't do anything when I try to click on it (i.e Power Options, Backup & Restore, Firewall) or it gives the line,Windows cannot find '::{26EE0668-A00A-44D7-9371,Paint and opening other things through Start Menu gives this fine,C:Windowssystem32ODBC32.dll is either not designed to run on Windows or it contains an error
I've tried this twice now (on the same machine) and each time Control Panel won't work; it doesn't open. If I change the start menu to show links to Control Panel applets only some of them work; User Accounts, Display, Power Settings, Windows Update and others just do nothing. This means I can't adjust my display properties to get the correct alignment of my dual monitors, among other things, so I've given up on it meantime.
Has anyone else had this problem, or any suggestions on how to overcome it?
When I click on the control panel icon on my desktop nothing happens. When I click on start>control panel I get the same result. I have a power options icon on my desktop and that does not work either. If I right click the power options icon and choose open file location the control panel opens normally. Everything works fine in safe mode though.
i installed windows 7 and managed to get sound working but in windows xp i had this soundmax control panel wizard that let me configure standard sound jacks to 5.1.
i tried going to control panel > sounds > configure speakers but no 5.1 options.
