Use A Usb To Memory Card Adapter When Have No Usable Usb Ports
May 17, 2012can i use a usb to memory card adapter when i have no usable usb ports
View 3 Replies
ADVERTISEMENT
USB Ports And Memory Card Reader Not Working Correctly?
Apr 8, 2011My USB ports and memory card reader have all of a sudden stopped working correctly . the mem card slots i cant tell if they are working at all but the usb ports are still sending power as iv still be able to charge my mp3 player but it just will not send any data .. this is made even more frustrating as i was using them both less that 10 hours ago iv not installed any new software and i have not changed any hardware so tbh im completely at a loss as to why they arnt working .iv done only the basic things to attempt to get them working again.. i un-installed them from device manager and let windows re-install them to no avail . I also went in to my bios and made sure that the ports were enabled .. they were
View 2 Replies View RelatedNot All Of Memory Is Usable
Aug 30, 2012I have a computer that is running Windows 7 Ultimate 32-bit. It has 6 GB of RAM installed, but it says that 3.00 GB are usable. My understanding is that Ultimate 32 bit can handle 4 GB of RAM. What do I have setup in correctly?
View 4 Replies View RelatedUsable Memory
Oct 29, 2009I know you've probably seen dozens of threads like this, but here's an interesting twist:
The laptop it's on (the Compaq Presario V2000) only has 512MB of RAM, and is showing only 383 available. Nothing near the level of the OS restrictions. (Besides, it's 64-bit.) I've already tried the solution here, but the "maximum memory" box was unchecked.
Any insight?
Kodak - Camera Says Memory Card Is Protected (reset Switch On Memory Card) ?
Nov 5, 2011my camara says memory card is protected (reset switch on memory card) how do you do this the camara wont take photos untill this is dun
View 1 Replies View RelatedInstalled Memory 6GB But 2GB Usable?
Oct 20, 2012My computer's memory was 2GB and i added 4GB more, but only 2GB is usable. I have tried many time take the Ram out and put it back but i still have the same problem.
View 9 Replies View Related1GB Installed Memory, Only 1gb Usable
Nov 13, 2009I have also checked the BIOS . but there is no place where i can dissble " Dram over 4Remapp" or something like that.
everything i can think of i have checked.
I know 32bit can't handle more than 2 or 3GB memory, but it can handle 2gb, that much i know.
when i start my computer. it show 1024mb ram . that counts that up. but in everything else it shows 2GB bit 1 usable.
and it says that 1024mb is hardware reserved, ( maybe it is that ? how do i change that ?
I have run a test. nothing wrong with either of the memory sticks
I also have seperat graphic card with 512BM Ram on.
Only 4gb Usable Out Of 8gb Memory In Windows 7
Dec 14, 2012Only 4gb Usable out of 8gb Memory in Windows 7
View 2 Replies View RelatedOnly 149MB Memory Usable Out Of 8GB Installed?
Nov 19, 2011I have 8GB of memory installed. Why can I only use 149MB?
View 14 Replies View RelatedMemory Installed 4BG (usable 2.97GB)
Dec 16, 2009I recently upgraded from Vista home premium 32 bit to Windows 7 Home premium 32 bit. My system now shows RAM 4GB installed (2.97GB usable) this never happened in my vista version.
I have searched numerous threads on this forum but and have found similar issues but none of the threads seem to have been resolved.
I am thinking to revert back to Vista if i cant make full use of my RAM.
Only 3072 MB Of Memory Usable On Windows 7 64 Bit
Dec 20, 2010Today I noticed that my system is only using 3072mb of RAM, I have 4 GB in my system and they used to work pretty nice until now, before all 4 were usable, now Im missing 1. I thought this was because ram remap feature was diabled on the bios (BTW here's my board : Biostar G31 M7 TE). So I enabled it and rebooted my system. Turns out it's still the same... I tried also enabling the memory hole to 15-16 mb (the only setting appart from diables) same results. I think this is decreasing my PC's performance... edit: what seems to be doing this is the ''pci mmio allocation''
View 40 Replies View RelatedWindows 7 64bit - 6GB Memory But Only 4GB Usable
Mar 19, 2012I have Win7 64bit with 6GB memory. The Windows System control panel agrees with that showing 6GB ram and nothing about a limitation. But today I was opening a lot of files and the program wouldn't let me open more files after Windows memory use reached 4GB. Task Manager showed 4GB used out of 6GB. I tried opening another file with a different program and my screen flickered and the program shut itself off, so it looks like the problem is with Windows and not the other programs. How do I get Windows to use all available memory not just 4GB out of 6GB?
View 13 Replies View RelatedInstalled Memory Ram 8 Gb Usable 2 66 Gb In Windows 7 32bit
Sep 21, 2012i have dell inspiron 5520 i install window7 32bit my ram is 8gb but show only 2.66 gb
View 3 Replies View RelatedDlink WiFi Adapter Disables All Usb Ports
Jun 25, 2012Starting last night my Dlink DWA-130 is causing all of my rear usb ports to not work. If I plug it into the front the computer doesn't even recognize it. I have tried using different ports on the back with the same result. I have even reinstalled Windows and the problem is still there.
Not Sure if this helps but...
My Computer:
mobo: AsRock 970 Extreme 3
processor: Fx 4100
gpu: Radeon hd 6570
PSU: Inland Silver Series ILS-600-2 600 Watt
OS:Windows 7 Ultimate x64
USB 3.0 Ports - No Available PCI Slots For Card
Jan 15, 2013I'm looking to upgrade my desktop to be usb 3.0 capable. The only option I can see since my motherboard doesn't have any is PCI and PCI-e card adapters. Problem is, I have none available. I expected there to be a version where the usb 3.0 port would connect to a sata port. I don't see any. There are also plenty of USB3.0 etc front bays, but unfortunately these products don't give much info on how these are connected internally.
View 8 Replies View RelatedUSB 3.0 PCIe Card With Adapter PC Card Not Working?
Jul 5, 2012I have Dell Latitude E6410 with PC Card Bus, StLab USB 3.0 PCIe card connected with StLab PC CardBus/PCIe adapter. OS is Windows 7. USB 3.0 card do not want to work (system do not find it - no USB 3.0 controller). Other PC Ie cards (modem ...) work with this adapter and USB 3.0 card works in other notebooks with PC Ie bus (without adapter). Is it possible that the card and adapter (from the same producer) are not compatible?
View 1 Replies View RelatedLow Profile Firewire Add-on Card With Internal Pin-out For Front Ports?
Nov 12, 2011My motherboard doesn't have firewire, and for the life of me i can't find a single expansion card that has an internal pinout that I can connect the cable for my front firewire port to. The closest I found was not low-profile compatible.and this is for the computer in my description, but on monday I'm switching out the case for a low profile hec 7K09 HTPC case.
View 6 Replies View RelatedCard Reader Cannot Format The Memory Card?
Sep 19, 2012I formated the memory card first on my samsung phone but still it asks to format the memory card whenever i connect the card reader to my sony laptop.
View 1 Replies View RelatedWireless Card / Adapter That Will Work With Win 7 ?
Oct 26, 2009I just had to return my previous windows vista adapter because linksys did not have any drivers for windows 7. What is a good wireless card/adapter that will work with windows 7?
View 4 Replies View RelatedCard Installs As Standard VGA Adapter
Feb 12, 2013I had Windows 7 64 bits and it was everything fine, but I have some programs that require drivers, and there isn't a driver for 64 bits. So I tried installing the Windows 7 32 bits version.Everything was working fine, until I found out that my video card isn't being recognized anymore, and it's being showed as "Standard VGA Adaptor". I searched and found out some people with the same problem. Most people advised them to update drivers, but that didn't work with me.The following error ocurrs when I try running the stup.exe which should update my video card's driver: "The NVIDIA setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit."The thing is, I tried unistalling the "Standard VGA Adaptor" driver, but it requeires me to reboot, and when it reboots the drivers are automaically reinstalled. I also tried reinstalling Windows 7 32 bits, didn't work. Tried reinstalling Windows 7 64 bits, didn't work.
View 2 Replies View RelatedWireless Adapter Card Recommendations For Desktops?
Dec 5, 2011my Netgear wireless card won't work. It won't work if I have more than 2 GBs of RAM. Which is stupid. I've already looked everywhere and the only answer I could get out of Netgear was "Sorry but we're working on an update". Screw them.Anyway, I'm looking to buy another one because I hate running a 30 ft ethernet cable through the house so I can get internet. I really don't want to get bummed again so if you guys have an recommendations that would work with Windows 7 Pro 64-bit WITH 16 GBs OF RAM (lol)
View 2 Replies View RelatedDoes The 802.11g Wireless WIFI PCI Adapter Card Work With Windows 7
Jan 16, 2012does the 802.11g Wireless WIFI PCI Adapter Card work with windows 7?
View 4 Replies View RelatedSD Memory Card Problems
Sep 22, 2009my pc has ports for SD memory cards and such, and after upgrading from vista to win 7 no SD cards will read, nor will they read while the card is in my mob phone while trying to access it through the phones software.
could it be some sort of driver problem?
however the phones manufacturer website contains no win 7 drivers.
any ideas?
Memory Card Not Detected In Pc?
Oct 16, 2011memory card(sony memory stick PRO Duo 4GB MARK2) not detected. How to recover datas/images?
View 3 Replies View RelatedHow To Unlock Memory Card
Nov 8, 2011I have a digital Canon Ixus 60, on the screen say's that my memory card is lock and yes I'm not that stupid I have already unlock the card it self at the side of it. Still I get the same message "memory card error, card locked"
View 2 Replies View RelatedHow To Format A Raw Memory Card
Dec 9, 2011How to format a raw memory card
View 1 Replies View RelatedWay To Unlock Memory Card
Feb 11, 2012I have a Canon Elph SD630 and have misplaced my memory card.The new one I purchased is a Transcend 32GB, but when I insert it I received a message saying "Card Locked!" abd Memory card error.I have tried sliding the lock button but have had no success.
View 3 Replies View RelatedMemory Card Cannot Showing
Feb 26, 2012Memory card did not showing
View 2 Replies View RelatedSd Memory Card Asking For Format?
Aug 22, 2012my name is gourinat i have 8gb memory card asking to reformat, but i do have imp data What to do
View 1 Replies View RelatedHow To Use Memory Card Reader
Oct 15, 2012howdo to use the card reader work.
View 2 Replies View RelatedCant Format Memory Card?
Nov 20, 2012i cant formatt my memory card what should i do
View 1 Replies View Related