Unable To Restore HP Probook 4520s To Factory Condition
May 19, 2012
i have a HP Probook 4520s (now out of warranty) and i want to bring the same to factory condition bcoz of virus issues. Now, on various forums i read there is an option of F11 for recovery manager, which is not working in my case.
1) In Disk management I can see my recovery partition (15 gb) but with no option of making it active.
2) My recovery partion is more like a folder in C: HP_RECOVERY_mountHPSF
What can be the best way to restore to the factory condition. This is a legitimate Windows 7 copy and therefore i do not want to install some other copy, also there could be issues with drivers and all.
I had trojan virus in my G62 hp and windows corrupted and it doesn't start and just goes to windows error recovery and it shows "Launch Startup Repair, Start Windows Normally" but it doesn't start anywhere so what shall I do now?
HP Compaq Presario CQ57, Windows 7 Home Premium SP-1 64 bit A month ago I bought an HP Compaq Presario CQ57 notebook (laptop), which comes installed with 2 x 1GB RAM modules. It functioned fine. A couple of weeks ago, I upgraded the RAM by replacing one of the 1GB modules with a 4GB one. When I restarted Windows, yes, it did blue screen momentarily, but recovered with another start and then things went well for a week.Then, upon attempting to reboot, it failed. On the Windows Welcome screen, it flickers briefly before it fails and goes to a blue screen.Using the HP Recovery Console, after trying a recovery that didn�t work, I tried the option of restoring to factory condition. Then, it still produced blue screens, giving error messages like IRQL less than equal and Page fault in non-page area.
I replaced the new RAM with the original 2 x 1GB RAM and tried a restore to factory condition option again. This time it worked. However, the hard drive partitions are odd.Disc Management As you can see, Disk 0 is divided into System 199 MB, C 75GB, not labled 133.34 GB, Recovery D 19.38, HP TOOLS E 3.97 GB.Ignore the CD ROM below.Isn�t System supposed to be on C? And the 133.34 GB unallocated space isn�t supposed to be there either.I ran the restore to factory again and it produced the same disk partitioning. I consulted HP customer service, and they sent me a Windows disk and wants me to try restoring from that rather than from the Recovery provided on the hard drive.
I have an HP Probook 4520s with I5 and 4gb ram and Seven 64bit.Everithing worked fine until 2 week ago.Now my laptop show me an error in the original DVDRAM GT30L. It seems unable to install the original driver of the original HP DVD Recorder.I tryed to download a new driver from intel but ... I can't use the DVD with Seven.The DVD is in perfect working conditions because with Ubuntu it works perfectly.
I had to reinstall my computer to Factory condition. Every thing went alright. Then after installing all the updates,is when I started having trouble. Now every time I boot up,I get a message saying installing Windows,do not turn off machine. It does it every time I Boot Up.Then it will work alright.
Any way I can reset my alienware Mx18 laptop back to factory condition? I am not looking to set it from a earlier back up, I want to re set it back to brand new.
i need to restore my Acer to factory settings, what i need to know is simple, If i select "Restore Your Computer To Factory Condition", do i need to have a windows 7 disc to finish it???? or to reinstall the OS? or does it do that all on its own? because the laptop came with it pre-installed.
I have taken many computers back to factory condition and never had any problems. This time, after backing up all my files to disc (15), in total, I have taken this HP laptop back to factory condition. There is no problem there. The restore is fine but I cant seem to load the discs I created. I have turned off the laptop completely, as directed and started it again with the alt f10 keys, which should automatically load my back up but nothing is happening and if I try to open the discs on their own, I get an error message saying that the path isn't there. I have already re-installed my various purchased software but it is the photos and personal files that I particularly want to get back. I have my own photos safely in a box but these photos belonged to someone else
I can't get into pc recovery drive (D) to restore pc to original condition in two pcs. I think it is because I reinstalled Windows 7 into drive (C), which prevents pc recovery from drive (D) [because it's not the original software.I can see the recovery drive (D).Also, I used SpotMau to get the windows 7 Ultimate product key, but the lable on the pc shows that Windows7 Pro is installed.The product keys are different.
My notebook (HP Envy 14) had been attacked by malware, and after eventually destroying the virus, I've realized that the system files/programs were severely damaged. For instance, when I attempt to open Internet Explorer or Firefox, a window appears, asking me to browse for a program to open the "unrecognized" Internet Explorer with... and this process applies to most of my programs, such as Microsoft Word (in order to open Word, I must indirectly open a word file document, it's impossible to simply click on Word from the start menu). So, that's why I decided to return my notebook to its original state, using the System Restore factory option. However, when I attempt to run system restore (after saving all of my important files onto an external hard disk), an error message comes up: "Error: Recovery Manager cannot run from the hard drive. Recovery Manager must be run using recovery media to perform a Factory Reset." What exactly is "recovery media" and why is this message appearing?
Having a little trouble restoring my computer to factory settings. I dont know why but I cant seem to just do it through the advanced menu because it says i dont have a restore point. Does anyone else know how to Restore my computer totally without having to buy a new operating system, Or even Just using a old one.
My problem is with my hp laptop running windows vista. laptop is hp pavilion dv6225us. OS was upgraded to windows 7 ultimate. was getting messages saying this version of windows 7 was not genuine so i tried to restore my laptop to factory settings. this failed. do not recovery disc; could not get recovery manager by pressing f11 at boot up. now at boot up i receive this message 'remove discs or media; press any key to restart. pressing any key nothing happens. how can i get to recovery partition to restore to factory settings.
I recently had a virus/malware attack on my system, removed it, but the system is damaged (Security center & updates cant be started etc) . I want to restore the comp using the acer feature "restore to factory settings". But I wonder, must I have a Win7-installation CD after the restore?? Because the computer came with preinstalled Windows 7 when I bought it. Keep in mind that it's a factory settings restore not a complete format c (i think) I've done a backup on hardrive "D" of my current system in case of anything going wrong. If a Cd is required, could you tell me another way to format the comp without buying the CD? My security center is damaged, so restore to point doesnt work either. If you got any solutions to how to start security center except setting it to "automatic" in services.msc (Since this doesnt work), please post 'em.
i was havin probs with my pc DELL isnpiron 17R ,,it was about missing of some storage drivers ,, i contacted a dell agent ; after he viewed the device manger and trying to reinstall them he couldn't and he told me that i've ghost or something in my registery and i need to do a restore to factory settings..i tried to shut down pc and turn it on again then i pushed the F8 button and i choosed " Repair Your Computer " and then i got " windows loading files " ,, stuck on it ,,,i tried to restart the pc and do it again but nothing i tried to remove battery and placed it again and retry but nothing i stucked on the same page.i used registry boost program on this site ,, after scan ,, i had a high damaged registery.
Okay, my computer is very clogged at the moment and I would like to do a complete restore, but I have some files that I need to keep. Is there a way I can do a complete restore but keep some of the files (no external hard drive).
I have a dell Inspiron n7010 and im trying to reformat my computer. I backed up all my personal files into an external hdd. However when I try to restore my laptop to its factory settings, I get stuck. Upon booting up my computer I press f8 to get into the advanced boot menu. From there I select system repair but after selecting that, it always gets stuck at windows is loading files. It doesn't look my computer is loading anything either and it doesn't make sounds as of it were.
For a variety of reasons, I want to do a clean install on my laptop, which is a Dell Studio XPS with Windows 7. I don't have any Windows disks (it's 2 years old and I'm fairly sure I wasn't provided any), so I'm trying to do it through advanced boot options. When I hit F8 during startup and select repair, I am shown the screen "Windows is loading files..." and then the system starts as usual, rather than giving me options for a fresh install, which the description (and every set of instructions I've seen) would suggest.
i have changed my hard disk on my dell inspiron 1440 but and i have install windows 7 ultimate x64, but when i activate my windows, my laptop does not boot. its probably about my bios since i have install a new hard disk and i need to restore my factory image
My computer has been slowly deteriorating the last few days. It first ran a system repair every time I started the computer and would then boot to the desktop, then it would just loop through the system repair screen over and over. I am thinking that my last option is to restore the computer to it's factory default since I have everything backed up on an external hard drive.
It was working great and I noticed that it would not recognize an external drive I was going to install some progs from, even though I can go in to Admin Tools and see it there, and then I tried taking it online and it says Windows Explorer not responding all the time, so I think the best bet at this point is to restore it back to out of the box condition.I just started tweaking on it, so it's not like I'll be losing much work.
So im looking to restore my PC to its factory settings so i saw from a video that says all i have to do is go to, Control panel->System and security->Backup And Restore->Recover system settings or your computer->Advanced recovery methods->Reinstall Windows (requires Winodows installation disc) so yeah, will this work? im pretty sure the disc i have that came with my comp is the right disc, on the disc it says"microsoft windows 7 Reinstallation DVD", Windows 7 Home Premium 64-bit.
let me know if this is the right disc and if this is the right way to reset to factory settings that would be super awesome!!!!
1st off, My user name is not a joke. I have a hp G72-B27CL Notebook that was purchased online from aGoodwill auction. The notebook looks brand new & in their listing for the auction they said it just needed a hard drive so I put my WD 500 GB hd in it & attempted to do a system recovery. It went through the whole process & ended with Welcome TO YOUR NEW HP COMPUTER, About a minute later it was showing Restoration Incomplete with the options to Retry or try to find out what the problem was, Well it would only allow me to try again, Which I did (actually 2 more times) Of course same results. Their is no recovery CD'S that came with the computer, However it does have the windows product key # on the back of it. This computer will not let me do anything else except keep trying to recover it. (Which is a total waste of time) Should I erase everything on that hard drive ? It really has nothing I care if I lose or not & how would I go about erasing the hard drive ? The computer I'm talking about wont let me do anything except what I have shared.
And I don't want to put the hard drive in another computer & mess up what ever computer I put it in. This really is a bummer because I felt I was getting a good deal + helping out a organization, So the bottom line is right now I have a pretty laptop that doesn't operate & I am currently down $232.00 + shipping cost. I truly apologize for the length of this post, But as I stated from the start I'm truly lost. Any suggestions & please remember you are replying back to someone that is truly lost, so if at all possible if you choose to respond. Talk in language I understand.
im trying to restore my X51 to its factory state so when the SYSTEM RECOVERY OPTIONS comes up there is no alienrespawn or Dell DataSafe Restore and Emergency Backup, Iv gave it a shot from alienrespawn app when i click on restore its says that it will restore to Orginal factory state so restart after that the SYSTEM RECOVERY.
there's something wrong with my HP Windows.o sound for instancehow can i restore the factory settings and start over?will this destroy data I've worked on. [i have backed up stuff]
i got acer emachines e627 laptop and i dont have any cd to restore and i forgot the password. how to restore factory settings without cd and without log in.
I have an inspiron mini, can't find model # anywhere. Is windows 7. I want to restore to factory defaults but do not have the admin password (owner died).
I have HP Probook 4520s. I have 9 cell 7200mAh battery installed on my laptop. My laptop doesn't start up when i press power button while on battery power. When i press power button LED light (where charger cable connected) blinks four or five times and stops and laptop doesn't start but when i connected charger (AC Power) then it starts up and works normally.
I have an Acer Aspire 4730z laptop, upgrading from Vista to Windows 7 Ultimate. Did the upgrade install, but unable to by-pass the eRecovery Management.The 3 options are 1. Restore system from factory default. 2. Restore system from user's backup and 3. Exit. Option 1 and 2 are grayed out. Have disable the D2D Recovery option in the Utility screen. But still unable to by-pass the eRecovery Management. If am unable to by-pass this, my only option is to insert my recovery disk and restore to factory default losing data store on HD.
