Turn The Hyper Threading Off In The Bios?
Sep 27, 2012
I have a severe virtual problem. Going on in my home and I would like to turn the hyperthreading off in my laptop one is Hp and the other dell. I also have a hp desktop pc with amd... The other 2 have intel...all came with window 7 ....but for the life of me I can't access my hard drive. When I save somehing it saves. It in the ram...how screwed up and my browsers are horrible. The only way I have been able to halfway install a router is thru my screwed up browsers. None of my window 7 pcs seem to know how to configure a router.. I have a new hard drive for Hp desktop. I really hate to install it then I am stuck only accessing the virtual part. I recently installed a new hard drive in my laptop then it went all to hell after I installed seatools. Now I find out the hard drive I bought doesn't need utilities that it automatically installs it self. Too late now . I can't boot or install Windows. Not even linux will install.
I can't afford too lose another $100 on another hard drive. So it is possible to turn off the hyperthreading in the bios ...I just need to know how. I don't play games or watch tv on my pc so I really just need it to be able to email,internet, and music, a printer would be so nice. Its been so long since I have been able to use one. I hook up a printer but everytime samething always happens my pc. States the printer isn't mine and I can't use it. I will settle for the email,music and surfing the net.
View 10 Replies
ADVERTISEMENT
Jun 17, 2012
I'm attempting to disabled Hyperthreading, but that option isn't in the BIOS. Two guides on disabling the "logical" cores require me to boot up "START" command, but what is that and how do I access it?Disable Hyperthreading in the Windows 7 registry - Super User
[URL]
Also, I want to set Team Fortress 2 to not use the HT cores, but the .exe file is non-existent and its files are apparently booted by Steam. I wanted to test if Team Fortress 2 and SimCity 4 (resource hogging singe-core) would improve with HT disabled. I also have an i7 720qm 1.6 GHz, which is the slowest i7 quad-core CPU.I tried to disable four "logical" cores through msconfig, but it also turned off two physical cores as well. I'd rather prefer quad core than dual core with HT.
View 4 Replies
View Related
Oct 29, 2011
[code] I was leaning towards the i7 because it seems to be the fastest processor for around $300.But apparently these new intel chips have sandy bridge which is a form of hyper threading.I'm just trying to figure out if I truly need the processor with hyper threading. I understand it basically turns the 4 cores into 8 virtual cores, but does it apply this speed to all computer programs and functions?I run 3 monitors and constantly doing multiple things including web design, graphic design etc.I also plan on maxing my ram at the 32gb the MOBO will allow to help this system run as fast as possible.
View 9 Replies
View Related
Jan 26, 2012
my mothers laptop (HP-2133 *Large Battery*) just stopped working.There have happened a couple of things, so I'll tell it one by one:- My mother turned on (From hibernation) her laptop one day, and the screen was green.:My thoughts: I thought that it might be the graphics card that had some kind of error on start up, so I just turned it off and on again. Then it ran like it used to. A few hours later the laptop had these random freezes, which made "Force-shutdown" the only possible way of rebooting.:My thoughts: I thought that this was perhaps a virus, but I never got the chance to run our Anti-virus (Kaspersky Antivirus PRO)- Now (two days later), when she/I tries/try to turn on the laptop, nothing happens... The laptop powers on, but doesn't actually run the HDD, or even the motherboard for that matter (Doesn't run the BIOS).
:My thoughts: I noticed that the only light that's on, is the power-light, (The HDD doesn't even blink). I also noticed that the screen doesn't even turn on, but the fans actually run (Most likely because the laptop is powered on)So I can imagine that the motherboard is dead, and in these couple of days, it's shown me that this is it's last days to live.But before I rip it apart and save the value parts, and scrap the rest, I would like to ask you guys for your opinion..
View 8 Replies
View Related
Feb 14, 2013
I want to install windows 7 home premium x64 in my sony vaio VCEA24FM, but I don't know how to turn off bios in it.
View 4 Replies
View Related
Feb 5, 2011
how to turn on hardware virtualization in my biosmy model is:Manufacturer:Intel Corporation Model:DG41RQ Chipset Vendor:Intel Chipset Model:
View 5 Replies
View Related
Aug 11, 2009
how to turn on hardware virtualization in bios ?. my mobo is Gigabyte MA780UD3H and my cpu is amd 7750 BE
and i want to know instructions to enable virtualization in my bios .
View 1 Replies
View Related
Oct 18, 2012
Synopsis: PSU died, replaced PSU with different model, system boots to bios successfully but does not recognize any devices in SATA ports, nor do those devices appear to be getting power. Now can't even get to BIOS, entire PC flicks on and off repeatedly as soon as I turn the PSU on regardless of whether I hit the power button on the front of the computer.
System Specifications
Original PSU that died: SeaSonic M12II 750 SS-750AM 750w PSU
CPU: Intel Core i5-3570K Ivy Bridge 3.4GHz
GPUs: ASUS 670 non-top version, SLI (2x)
MOBO: ASRock Z77 extreme 6
RAM: Mushkin Enhanced Blackline 8GB (2 x 4GB) SDRAM DDR3 2133
Optical drive: Sony AD-7280S-0B 24x SATA Internal DVD+/-RW Drive
SSD: SanDisk Extreme 240GB SATA 6.0 Gb-s 2.5-Inch (OS is installed here)
Storage drive: Western Digital Caviar Black 1 TB SATA III (This was not connected when power supply died)
Detailed explanation:About a week ago my PSU (Seasonic 750w) died randomly while the computer was left running in sleep . I RMA'd the dead seasonic. In the mean time I happened to come accross an extremely good deal on a new PSU, so I bought it (Thermaltake smart m850w PSU) to have a backup and to get my machine working again. I hooked up the new PSU to GPUs, CPU, fans, ATX power connector, and to all of the SATA devices, (the SSD, the HDD, and the Optical drive). I made sure to connect the data cables to the SATA devices in the same configuration they were in when working properly. The computer boots successfully to the ASROCK BIOS, all fans spinning. However, I get the error code "A6" on "dr debug" (the led display on the mobo). The manual says this means "SCSI detect". I have no idea what that means.
I was able to load the UEFI, and bios recognized all components except for any of the SATA devices--(SSD, the HDD, and optical drive not recognized). The RAM, GPUs, processor, and fans were detected. At this point I was stuck in BIOS because I couldn't boot off anything.I did not have the HDD connected when the PSU failed, but now the BIOS won't read that either. I don't think any of the SATA devices are actually receiving power. Again, the UEFI showed that there were no SATA devices connected to any port, when in reality they clearly were connected both by power and data cable. Then things get really strange. I unhooked all of the SATA devices except the HDD (the one that wasn't hooked up when the original PSU died). I plug the AC into the PSU, then turn on PSU (not the power switch for the computer, the switch on the PSU). The computer starts flicking on and off in this weird rhythmic pulsating pattern "click...click...click...click..." with about a 1/2 second between each click. Each time the power flicks on, the LEDs come on and the fans spin briefly. The strangest part is that I don't need to hit the power button on the front of the case for this to happen, it just starts as soon as the PSU is turned on. In fact, I can't get the computer to turn on at all--the switch on the front of the computer appears to be dead.
1. Unplug the power cables from everything and re-seated them.
2. Reseated the data cables to the optical drive and the SSD on the drive end, not on the MOBO side as they are covered by my GPUs and I would have to take them out in order to do that.
3. Tried hooking up a SATA power cable from my old modular PSU and using that in the new PSU in an attempt to power the optical drive (didn't work, I know, bad idea--I learned you aren't supposed to do this shortly after I tried it)
4. Setting all preferences to default in the UEFI.
5. Disconnecting the power cables from one or both of the GPUs.
I think that this is either a problem with (1) the motherboard, (2) the new PSU, (3) all 3 SATA devices (unlikely). The fact that I can't even get into Bios anymore tells me that this may be a MOBO or PSU issue.My main question is how to procede from here? I suppose I can wait for my Seasonic to come back from RMA--perhaps that will clear up the issue. I just can't shake the feeling that this is a MOBO issue though. I am worried that if I keep screwing around with it I may end up frying my CPU and GPUs. I can eat the cost of a MOBO or PSU if necessary, but I can't afford to buy a new processor and two new 670s.
View 9 Replies
View Related
Aug 14, 2012
trying to install Windows 7 on sony laptop with a copy that is different from the original copy of Windows 7.did partdisk, clean all, create partition, and dvd install gave the "can't install to disk, turn on disk controller in BIOS" error. there is no disk controller function in my BIOS.if partdisk clean all was successful, does that mean the HDD and its controller board are ok, that is, not physically damaged, and the problem is with software/installation/setup etc.?what should i do next, in order to have a successful install?
View 9 Replies
View Related
Dec 22, 2012
Thinking of going with a push-pull set up for CM 212 Evo using the stock fan on one side. What's a good (preferably quiet) fan for the opposite side (pull)
Needs to be 120mm btw, the CM 212 Evo comes with mounting brackets to attach the fans either side.
View 9 Replies
View Related
Nov 5, 2009
Because Hyper-V has gained a lot of publicity lately and because I truly love the server virtualization products...i picked up a book on Hyper-V and have been reading through it and testing Hyper-V on a box under my desk.
Very first thing that caused massive grief: Trying to remotely administer Hyper V from a workstation on a Windows domain while the Hyper V server is on a workgroup is a real challenge. It took nearly an entire day to get this working and that was after using the HVRemote shortcut tool on the MSDN blogs. Now that I know how to do this, it only takes a few minutes but it sure is complicated for somebody doing it for the first time.
Next, my company does quite a lot with Linux virtual machines. From what I have seen, the only supported HyperV Linux guest OS's are SuSE and RHEL (only using emulated drivers). Of course, the emulated drivers don't provide the performance of their synthetic counterparts.
In addition, it seems that Linux guests are relegated to no smp support. So, it's 1 CPU only for any linux guest no integration services are supported, such as remote system shutdown and Time Synchronization or Heartbeat So, in closing, it's really hard to take this Hyper-V product seriously in the enterprise market with such limited support for any OS that isn't Windows. Looks like we will be sticking with VMWare ESX and ESXi for the forseeable future.
This posts here in the vmware blogs pretty much corroborates my feelings:
VMware: VMware: Virtual Reality: Who’s going to Run Linux Workloads on Microsoft Hyper-V Now?
View 3 Replies
View Related
Feb 24, 2012
Can not make hyper work with my new window 7?
View 1 Replies
View Related
Sep 5, 2012
I want to put a her-link of a video on my desktop
View 1 Replies
View Related
Apr 14, 2012
I have been doing autocadd and here lately my computer has been shuting off and rebooting then having a hyper transport sync flood error occurred on last boot come up i know nothing about computers so i have no idea what that means any advise were to start
View 1 Replies
View Related
Dec 6, 2011
I have WinRAR and have extracted Windows XP Professional ISO file which I downloaded from school's MSDNAA's web site.
But I can't seem to locate one. Is there a way to obtain Windows XP equivalent (not 3rd party applications) of Hyper Terminal to use it for Windows 7 Ultimate x64?
View 9 Replies
View Related
Feb 20, 2013
i only have this happen while in on secondlife that my pc . just kicks me down to a reboot up and then this comes up , hyper transportsync flood error and blaa blaa press f1 to continue , how or what do i do?
View 2 Replies
View Related
Aug 13, 2012
Free Download ATI Mobility Radeon HD 5470 Hyper-memory Driver for Windows 7 32bit?
View 1 Replies
View Related
Aug 23, 2011
I've got an Acer Model As5742 Laptop with an i5 480M processor and 8 GB of good Ram. I'm running Win 7 Pro 64 Bit. It's only about 5 months old and this started about a month ago. I have no other problems. IE: Blue Screens or Lockups or anything, just the Bios clock changes to a random date and time after every restart. I replaced the Bios battery twice and it only effects the chore of having to reset the time in Windows every time I boot.
I'm going to send it to Acer to be repaired within a week or two, but maybe it's not a bad timing mechanism in the motherboard and one of you people have a correct solution to it. Which will save me the trouble of sending it in for a motherboard replacement.
I do have all the drivers and bios updates installed. Oh yes I've ran about 15 different virus Etc. Malware scans with several different products and they all come back clean. I ran System File Checker SFC /scannow from the command prompt several times that also comes back OK.
View 3 Replies
View Related
Aug 25, 2012
so i did a bios update, and it wont boot after the update.its a asus m4a79xtd evo (rev 1.01g)i dont have a backup of the bios
View 3 Replies
View Related
Jan 19, 2011
I have a five-month old HP Compaq Presario Laptop, which has been working fairly decently (I've had a few virus scares, and my Norton quarrentined something a twenty days ago). On HP's advice, I just updated the BIOS on my laptop. It's currently stuck at Verifying New Bios Image, and it's at 100% - It's been stuck that way for a half-hour plus.
View 14 Replies
View Related
Dec 1, 2012
My Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers,
View 3 Replies
View Related
Jan 18, 2013
My printer keeps giving me the error message "A printer error has occurred, turn off the printer, then press on button to turn on. See your documentation" I have unistalled it held down the on button and cancel button at the same time to print a test paper, but still can't get anything to print.
View 9 Replies
View Related
May 26, 2012
What are the types of BIOS over years up to present BIOS types ? What make each BIOS unique and better then the previous ?
View 3 Replies
View Related
Nov 25, 2011
was just wondering if this is possible? can i set my PC to hibernate and then tell it to come out of hibernation at a certain time - like say, an hour later?
View 11 Replies
View Related
Jul 10, 2012
How to turn windows to 16 bit?
View 5 Replies
View Related
Nov 30, 2012
I had to turn it off to access Geek squad once and now I can't find the button to turn it back on
View 1 Replies
View Related
Aug 12, 2012
I had only used it for a day and then the next day it wouldn't even turn on. I have tried everything that I can think of to fix it. From unplugging it and plugging it back in, changing out the power cord with a different one, trying to plug it into a different location in the house, turning the surge protector on and off, etc. I opened the side up and everything seemed to be in place and nothing was obviously unplugged. We do have a warranty but when we called we got put on hold for an hour + and gave up. We will probably call them again Monday I just wondered if there was something else that I should try before calling it quits and switching the computer out completely.
View 5 Replies
View Related
Sep 8, 2010
I just got a new system with Win 7.I've been using XP since 2002 and I first used Windows in 1989 (version 2.11). The new computer is for my sole personal use.Because I dont need a nanny operating system I have turned UAC off. Being an adult I'll take full responsibility if I break something.Is there some way I can also turn off all this ACL stuff. I don't need it - its my computer, its my data, and I am the only person who uses the computer.If that means a reinstall then I can do that - I bought a Win 7 Pro 64bit licence. The only reasons I got 7 were symbolic links and libraries, but I'm wasting so much time jumping over needless security hurdles that I've yet to even look into them.I know all this stuff is relevant in a corporate environment - but this is my personal computer, its probably the last one I'll have - I dont need the hassle.
View 9 Replies
View Related
Sep 8, 2010
After a Windows update today I noticed when I went to turn off my PC that there was some sort of Message pop up on the Desktop just before it shut Down. I was unable to read it so I did another restart and shut down and again got something that pop up on the Desktop again just as it shut down and I dont have a clue what it is
View 1 Replies
View Related
Jul 20, 2012
nobody will take it like this, or i will get less for it. Why is this happening , how can i fix it? Everything else works fine
View 9 Replies
View Related
Jul 30, 2012
When I turn my PC off, it turns on by himself. Only when I remove cable from electricity I can solve this problem. This problem started to show up after I changed video card. What reason could it be for this problem and how can I solve it?
View 9 Replies
View Related
