I'm running Windows 7 RTM x64 on a Macbook Pro.
This didn't happen on any of the beta releases, but I keep getting the screen reoloution dialog box when i first login.
I can close it, of course, but its a little annoying
Any ideas?
I would like to hide the ALT+TAB dialog, but I don't want disable it.
Or... If it is possible I would like move ALT+TAB dialog from center of the screen to the lower right corner of screen and reduce size of this dialog.
I'm recording part of my desktop and I do not want to be recorded this dialog.
I'm using Windows 7 Pro. I have remove the login pw in my user account now I do not need to do the login and able to use the computer right away. But I found I am using the computer as a user not administrator. How can I skip the login screen and go straight into desktop as administrator.
View 1 Replies View RelatedI have an RDP Server on a windows 7 ultimate 32 bit and i would like to be able to use another system login screen to connect to this server. As in when i turn of display last local users, so that if i was to enter XXX into the username and XXX into the password and it will connect Although i wouldnt mind being able to set up roaming profiles between these systems either.
View 1 Replies View RelatedAs of about 3 days ago my Dell Inspiron N7010 (Windows 7 Home Prem 64bit) fails to boot up. It gets to the initial Windows screen before the login screen and freezes, then sends me into Startup Repair. [code] I've tried running the diagnostics and get no error codes. I've tried restore points, memory diagnostics.. pretty much everything except factory image, with no success. I have a lot of government programs installed on this laptop, so.
View 9 Replies View Relatedi have a Dell Vostro 1520 and im running Windows 7 with a 32bit. It is only 2 years only. It started about a month ago. I was on my laptop viewing and deleting some unwanted photos i had. A few minutes later i realized that i deleted a photo that i wanted. So i went to the recycling bin and restored that photo. When i went back to my photos and went into the album, it said something like i do no have permission to access this folder. Please press continue to get full permission. I clicked continue and i got the access i should have. Now i tried many more random folders and the same thing happened. Also when i came out of the folders, the folders had a big pad lock sign on the front of it. After that i shut down the laptop and went to turn it back on. The laptop will power on like normal. I can press f12 for the boot options. which i have already tried many times. I also tried it in safe mode and what-not, but still nothing. I can hear the fan and stuff spinning up like normal. I have also put and CD into the CD ROM and that spins up fine. So after the Dell logo on the screen, it goes black and stays that way with the cursor. You can move the cursor around no problem. I should also add that the battery light is and has been flashing for a good wile. Its flashing orange and blue. I'm wondering if this has anything to do with the battery. Because my laptop will not charge with the AC adapter in it for many months now. It will only stay powered on with the AC adapter plugged in. One more thing. The LED lights over the buttons. None of the are flashing, besides one, on the far left. And i cant find out anywhere what this LED light stands for.
View 3 Replies View RelatedMy son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
View 1 Replies View RelatedI have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
View 1 Replies View RelatedOkay so lately I've noticed that my PC isn't displaying the BIOS splash screen anymore and skips straight to the Windows login screen.It didn't really bother me until today when I wanted to boot into Ubuntu and I couldn't select which OS I wanted to use.I'm pretty sure the problem isn't the BIOS itself since I unplugged all the peripherals except the speakers, removed all the RAM and the BIOS did beep repeatedly. And given enough time, I can boot into windows (and only windows ).Apparently people have had this problem before and all the solutions I've read such as "Press 'del' to go into your BIOS!" really doesn't help since I can't see anything in my BIOS menu.The only solution that made sense to me was that my CMOS battery could be dying. I haven't changed my rig since I built it in 2009. The only significant event that happened recently might be that Windows updated itself.
-PC doesn't display BIOS splash screen
-Can't see messages displayed by system
-When windows does bootup, everything runs just fine
-Haven't changed rig for ~3 years
Everything shows up fine until the welcome screen after that it normally used to fade to the desktop but now it goes blank. The screen in Black with only the mouse pointer. Its not hung, i can move the mouse pointer. Then after a minute or so it advances to the desktop. Everything on the desktop loads up in less than 5s. The PC runs fine, it is really fast as there are only a few programs, but only boots slow. My total boot time is about 3-5 min. I think it should be like in a minute or so.I have not tweaked much with the system but have installed a few programs like MS office, Nero, Acrobat and Photoshop. These are the only heavy programs in the PC right now. The only games on the PC are AC1 and AC2. I have uninstalled my graphic driver and reinstalled. I already minimized the programs in the msconfig>startup to the minimum. I have run ccleaner, spybot s&d, Antimalware and i also have a trial copy of Kaspersky AV (upgrading later to 1-year license). there are no peripherals attached during boot except the USB keyboard and mouse. A printer is attached too but is most of the time turned off.
View 11 Replies View RelatedWhile attempting to restore a previous backup of my system (with Norton Ghost 15), I got an error, and the system rebooted. Upon reboot, I get the black screen of death with just the cursor instead of the usual login screen. I have tried the following thus far: These all give me the black screen of death with movable cursor:boot in safe mode boot in safe mode with networking boot in safe mode with command prompt last known good configuration I did an initial system startup repair which went through and said it repaired it, rebooted, but no change. I did a pre-boot diagnostic test - nothing memory test - nothing tried restoring from restore point, but it says I don't have any (LIES! BLASPHEMY!) tried restoring from restore point on external disk - seemed okay, then failed. chkdsk - found some stuff, fixed it, no change. tried ctrl+alt+del on black screen of death - nothing
Now, I know that the hard drive itself is alright, that is, the information is still all there still. While I can't give you exact specs, I can tell you that I am on a Dell Studio XPS running Windows 7 home premium 64 bit. I'm at a loss as to what else to do. Despite being a black screen, with just a movable cursor, the system still appears to be running, as every few minutes, it will show the "thinking" cursor, where it shows the little circle next to the arrow.
i recently just installed a clean install of windows 7(instead of a upgrade from my vista.i got the free upgrade),now everything works fine expect when after the windows 7 splash occurs there is about a 10 second delay were the screen is just black with a cursor.
View 9 Replies View RelatedI'm running Windows 7 Home Premium.As I brought my computer out of sleep mode the computer had crashed with the screen showing vertical, multicolored lines that vaguely resembled gray.I had to hard restart my computer and after the splash screen, the login screen with all the users never appears, nor does my cursor.Nothing is on my screen except a faint glow indicating that it's active.
View 2 Replies View RelatedI got a bad virus on my computer about a week ago. I decided to use my windows 7 installation disc to reformat my disk drives and reinstall windows 7. The installation goes smoothly and I am able to login to windows. But after I install drivers and updates, then restart the computer, I get the "starting windows" screen with the swirling logo. I can hear the chimes that sound when I get to the login screen, but the screen is black. I can make the cursor appear by moving the mouse, but I cant do anything else. I never created a system restore disc, so I dont have that to help me.I have done some tinkering and will tell you what did not work so far.First, like I said, I used the windows 7 install disc to reformat my disk drives. Then, I reinstalled windows. I installed the updates for my graphics card and motherboard. When I restarted, I got the black screen. I restarted the computer and used F8 to do a system repair. This detects no problems. I tried to use the "startup repair" on the windows installation disc. This does not recognize a problem. I have tried it several times. Same result. Next, I tried to use the repair options on the windows install disc. I went to command prompt and typed in: bootrec.exe /fixmbr, bootrec.exe /fixboot, and bootrec.exe /RebuildBcd. (An interesing note: When I used the RebuildBcd command, it said that it detected 0 windows installations.) After the first time I did that, I tried the startup repair and got my first and only error message: "Startup repair cannot repair this computer automaticaly". I checked the details and it said "Problem event name: StartupRepairOffline". If you need the rest of the details, I can provide them. But I tried the repair again, and there was apparently no problem. Yet, still got the black screen.I then reformatted again, deleted both drives, and made new ones. I tried to install windows again, and I can get to my desktop.(One thing I noticed is that before I install updates, the computer is saying that my monitor is a "Generic PnP monitor on standard VGA graphics adapter". I dont know much about computers so this may be normal before installing the graphics card updates.)This time, I was connected to the internet and tried to install the system updates first. After all 120+ updates installed, I restarted and got the black screen again.I decided to use the install disc again to reformat, delete, and recreate the hard drives. This time I tried to install windows on the second hard drive (Disk 1) Again, the install went smoothly. I started installing the graphics card and motherboard drivers, but this time it told me that my disk drive D needed to be formatted before use. I reformatted it (this took MUCH longer than the format option on the install disc), installed the drivers, and restarted. I still cant get into the login screen. Finally, I used the install disc to reformat, delete, and recreate the disk drives. This time I installed windows on the first hard drive (drive 0) again and got to the desktop. Now I tried to install the motherboard drivers first, then restart. I did this and was able to restart and get back to the desktop. Next, I installed the graphics card dirvers, and then restarted. Black screen again.
Here are my computer specs:
Windows 7 64bit OEM
EVGA P55 FTW motherboard
EVGA GTX570 graphics card
Intel i5-760 processor
Intel patriot 8gb ram
Ok so I was on Windows 7 7231 x86
So I upgraded to Windows 7 7264 x86
And when It was done I turnd it on and there was no login screen
Just a black screen and my mouse
Im think that If I wait for the next build I can upgrade to that and it will be all good what do u guys think.
I dual booted it with XP so I can go on the XP Admin account and get all my stuff back so thats not a problem.
after booting, I get a black screen. There is no way for me to login. I tried to login Safe Mode but after I cannot enter the password as the keys in the keyboard are not working and then it restarted to Normal OS and same problem happens.
View 3 Replies View RelatedWhen I boot up my computer, it displays the animated windows7 logo as normal, but where it would normally display the login screen all I get is a blank screen with the mouse cursor. I've tried all keyboard shortcuts and random clicks to no avail - it stays on that screen for hours with occasional HDD activity.I've tried booting in safe mode only to encounter exactly the same problem, and have no previous restore points (which I know is a big mistake).Due to it not starting in safe mode either, I tried to replace the winlogon.exe file from another Windows 7 instillation to no avail - I still get the same problem.I am able to boot into linux (off my removable HDD) and windows XP (from my secondary internal HDD), so I am led to believe it is a corrupted file or dodgy setting within Windows 7 rather than a hardware fault.
View 9 Replies View RelatedRunning Windows 7 Ultimate N x86 on a Dell Inspiron 6400I used MSConfig to set the computer to boot into Safe Mode - Minimal Services. I did nothing else. That's the only thing I did.Now when it gets to the login screen, nothing shows up. Just the cursor, the Ease of Access button, and the Shutdown button. No choosing users, no entering passwords, nothing. Which means I cannot log into any accounts. All I can do is shut it down or restart the computer.I'd also turned off system restore a while back because of an infection there, but forgot to turn it back on and so I have no way to roll the computer back.I tried hitting F8 and telling it to boot normally, but it continued through Safe Mode, so no luck there.
View 9 Replies View RelatedI'm having this weird problem. Randomly my login screen looks like this.imgur.com/0X5AHThere's no way to get past that point. It doesn't seem to be loading anything, just sitting there.I have tried Safe Mode, Startup Repair, sfc /scannow, and nothing seems to work.
View 3 Replies View RelatedI put the laptop into safemode and checked for viruses malware and trojans, also tried a system restore but that didnt seem to do anything and found nothing suspicious. also did the sfc /scannow no errors reported, I read that you could get into the Task manager and stop the explore.exe and add a new one and start it again. This however i cannot try as i cant get past the windows logo screen.
View 7 Replies View RelatedCurrently, my computer will start up normally, and will, after the logo boot, end up at the login screen, except all I see is a black screen with the "Windows 7 Home Premium" at the bottom, and the red button on the bottom right, as well as the accessibility tools on the left side towards the bottom. I also have a working cursor. I dont see a user selection or anywhere to click anything except for the mention icons. I dont know what happened, but prior to this issue, I ran a Disk Check on startup as prompted. When I returned to the computer after the disk check completed, this issue occurred.
I have tried CTRL + ALT + Delete, but to no avail. I have also tried safe mode, but the same problem occurs, and all of the startup options I tried in the boot menu don't work either (Last known good configuration, Low resolution, safe mode, etc etc.). I tried checking for memory errors, and running chkdsk (Disk Check command) with the proper parameters (C: Drive, /r) in the command prompt with Startup Repair, both have no solution. Also, I don't have system restore turned on, so there are no available restore points.
Toshiba Qosmio X505-Q887
500GB HDD
4GB RAM
1GB Video Memory
Windows 7 Home Premium 64bit (x64)
I'm getting a black screen when I login to my account nothings there not even the start bar or task bar it happened when I installed this theme it has an explorer file sadly I forgot to make a backup also even on safe mode there isn't a task bar and I've tried starting it via task manager but doesn't work
View 1 Replies View Relatedyesterday I found my computer wouldn't let me log in. I left it thinking that the computer would work after a few hours. anyway, next day came and i turned on my computer. After waiting for it to start, it went to the log in page. I couldn't type my password into the login page. But the blinking thing, (where you can type) id blinkying...however I can't even move my mouse cursor. Like its literally frozen. I restarted the computer, then pressed F8 continually. There came a series of options so that I could possibly get my compute to start working again.
- repair your computer Then a 'system recovery option' window opens up. There's 'system repair' <I did this, and it said that there was no problems> 'System restore', 'windows complete PC restore', 'windows memory diagnostic tool', 'command prompt', and TOSHIBA recovery wizard'. Yes it's a Toshiba laptop.
- safe mode
- safe mode with networking
- safe mode with command prompt
- enable boot logging
- enable low resolution video
- last known good configuration
- directory services restore mode
- debugging mode
- disable automatic restart on system failure
- disable driver signature enforcement
- start windows normally
I've done safe mode, last known good configuration and start windows normally.
I got the Windows 7 RTM quite a while ago and had no problems with it. A couple days ago, though, I recieve a black screen with movable cursor after login. I am dual-booting with Windows XP, and XP is working fine.
Task manager will open, but is 'hidden' under the black screen. Same with everything else but the cursor. I suspect this has something to do with VMware server, as this was the last program I installed (about a week ago) and it was also affecting my network adapters.
I've been running Windows 7 since the end of January without any problems until yesterday. My USB Sound device wasn't working correctly so I restarted. Since then, I can't even get to the login screen.
Once I choose I want to operate Windows 7 (I have Vista also a separate drive just in case something like this happens) the windows logo begins to load... but then it flashes the BSOD for a second then restarts. I tried running repair but it did nothing. I've unplugged the USB device and that made no difference. I wish I could say what the error code was... but it restarts very quickly.
Ok im back with another problem with my friends computer.After the password login page he gets a black screen with only the arrow pointer, it can move but nothing else is shown, just a black screen.I have tried CTRL + ALT + DEL - New task - explorer.exe with no luck, also I booted into safe mode and uninstalled the video card driver which also does nothing.
View 3 Replies View RelatedWhenever my PC is idle for a while (haven't timed it but I think it's about 30 min.) it will switch to the blue login screen. I've never actually seen the login screen since I don't use a password, but I'm assuming it is. Blue screen, shows my name and icon, ease of use button on bottom left, etc. Anyways, I don't really want Windows to DO this, so can someone tell me where I can change those settings? I already tried changing all of the Power settings but it still does it. Oh, BTW I do not use a screen saver either.
View 4 Replies View RelatedI've had this problem for a while now and haven't devoted much time to fixing it but when ever I login after restarting it will log me in but I will be at a black screen. If I leave it for about 2 minutes my desktop appears and all is working fine. I did some research and have found nothing. Ive done disk checks, defrag, registry cleans, and malwarebytes and another antivirus only to come to the same result. The only thing I have come close to is that if I disable all services in msconfig and reboot it logs in quickly, but the problem with that is that none of my drivers work correctly. Im using an Asus G72 laptop with windows 7 premium (64-bit).
View 4 Replies View RelatedYesterday i created a VPN on win7. Ever since, i get a windows log in screen when i boot up my computer or restart it. There is no password required but there is my account picture which i have to click to start windows. Anyone know how to remove this so it directly enters windows when i start my computer?
View 6 Replies View RelatedI upgraded my HP m8530f from Vista Premium to 7 Ultimate and have 2 main pain in the butt issues:
When it reboots it will not load the login screen. it loads the windows 7 logo and then sits at a blank screen with the pointer. it'll sit for hours and never load.
I CAN reboot and load the last known good config and I can login, but no matter what I try, every restart results the same.
2nd issue: I cannot get to the internet. I can get to the homegroup, I cannot even login to the router. But I can ping any site, my ISP sees the PC on the net. But no matter the browser I cannot get online. I cannot get it to activate the OS either.
I did learn I have an integrated Realtex POS lan adapter that I blame, realtek says it's driverless hardware. Hp doesn't have W7 support for this PC. my buddy's Pavilion Elite does have driver download support for 7, but of course my mid-range PC does not!
Any thoughts? Suggests? Genius that know the answer??
I have Dell studio series 1558,I have two issues: After Powering on the laptop and inputting the password for login to Windows 7, I get a black screen with the Mouse cursor active. In the background the login seems to have happened but I don't get to see the Desktop. When i open any program or web page, e.g. yahoo messenger, the messenger/webpage display is very small, i had to manually enlarge it to view properly, i tried changing my screen resolution, but didnt work.
View 12 Replies View Related