I once tried to duel boot 7 and Xp (it did not work). I now have two options at boot, one of them being an earlier version of Win (that does not work) but I only want 7. The Xp install did not go through correctly because a scrached disc. Is it possible to accomplish this w/o re installing 7 completely?
View 2 RepliesI apologize in advance for asking the same question everyone else has been asking but with slightly different configs.I installed win 7 custom upgrade to new blank c drive from xp/ubuntu duel boot (d drive) using a networked cdrom.I want to remove xp/ubuntu duel boot drive completely and boot stand alone win 7 on c. I have read the numerous posts about running win 7 repair 3 times after activating the c drive win 7 partition but I have no cdrom to boot with on this system. Is there another way to repair win 7 on c to boot stand alone
View 2 Replies View RelatedWhat it is, i'm trying to duel boot Win 7 and Vista, on another HD. But my system is a Inspiron 570 running Win 7 HP 64bit, and it is setup in the BIOS as a ACHI. When I run setup on Vista, I choose a Custom, where it asks for upgrade, but the upgrade is greyed out, because I'm doing a clean install, then a error dialog box comes up and says,
"Windows install encountered an unexpected error, Verify that you have the Installation source are accessible, and restart the installation".
ERROR CODE: 0XE0000100
The drive that I'm trying to install Vista on is a 80GB drive with no partitions.
I have a ASUS Eee PC 1015BX. I want to install Windows 7 Home Premium, becauseStarter is so limited. When I start Setup, it indicates that there are 4 partitionsPartition 1 (C:) is the Windows 7 Starter installation. Partition 2 is 15GB (recovery). Partition 3 (D:) is just a partition for photos, videos, etc. Partition 4 is only 16MB: It's for a program, called Boot Booster. Can I format Partition 1 and 3 and delete Partition 2, then installing Windows
View 1 Replies View RelatedI have just read a great tutorial in these forums about a duel boot (Windows 7 / XP). MY question is about XP drivers.....after you have succeeded in installing XP as your other OS. Please tell me what I need to know about drivers as I am new to all this.Do I need to be in XP and find and download a whole bunch of Drivers?
View 1 Replies View RelatedHave XP, then installed Windows 7 as Dual Boot. Now trying to get rid of XP. All is backed up in case of disaster.
I've tried 3 different procedures in these forums with no luck. Last thing I tried was using EasyBCD to remove the boot option. Now the computer just boots straight into Windows 7, but I noticed that the XP partition is still active. Made the Windows 7 partition active, but when I reboot, I just get a blinking cursor on the upper left of the screen and nothing happens.
I've tried the Windows 7 installer/ Repair my computer/ and running Startup Repair 3 times and still no luck. just get the blinking cursor on the corner of the screen. I then have to boot from CD with Partition Wizard and reactivate the XP partition and I boot again into Windows 7.
The only thing I am hesitant to do is delete the XP partition. If I do and then I can't boot, I can't make XP active again to boot and would have to restore everything and would be where I started again.
I recently decided to install WinXP on my Windows 7 Homepremium computer. I partitioned my hard drive into 2 and installed XP on the 2nd one.How do I delete XP completely and still keep everything from Windows 7?Is it possible to just do system recovery on Windows 7 and return it to an earlier state?
View 23 Replies View RelatedI have attached the screen shot from Disk Manager which shows how I installed Windows 7 on a machine that originally ran Vista.After I used Windows 7 I have not used Vista for over a year so I moved the Windows 7 to the start of the HDD using Partition wizard and some instructions on the web.I now want to delete all the vista files and stop the dual boot getting the PC to go straight in to Windows 7.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, x64 Family 6 Model 15 Stepping 11
Processor Count: 4
RAM: 3327 Mb
Graphics Card: ATI Radeon HD 4800 Series, 512 Mb
Hard Drives: C: Total - 509906 MB, Free - 305018 MB; D: Total - 205479 MB, Free - 183636 MB; E: Total - 715401 MB, Free - 300404 MB;
Motherboard: ASUSTeK Computer INC., P5Q-PRO
Antivirus: Norton Internet Security, Updated and Enabled
I Cleaned installed Windows 7 (64bit) to dual boot with my already existing Windows XP SP3 (32bit). Everything is great and life is fantastic!
I'm ready to remove XP now.
Any suggestions on the steps to follow, and remove XP, without screwing up my fast, great and fully working Windows 7.
I have a system that dual boots with Windows 7 (64 bit) and Windows XP (32 bit); each OS is on its own hard drive. I want to reformat the Windows 7, deleting the OS in the process. What I'm wondering is where is the boot loader located? Is it on the Windows 7 drive (since it was installed after XP), and will I need to do anything special to have the system load Windows XP by default after the Windows 7 installation is gone? Will the system simply detect the old XP installation and load it without the bootloader?
View 2 Replies View Relatedatm i dual boot XP and windows 7 Ultimate (full retail, not OEM). i want to remove 7 from my machine so i can install it on a new machine. have read various posts how to do that, but the posts are all old and a bit of messing about involved. i dont want to mess up so what i wondered was if i used windows 7 manager to change 1st boot option to XP, then formatted the partition (same hdd as XP) that has 7 on it, would that save all the messing about trying to repair boot failures in XP and the boot option screen, making XP boot correctly? i could then format the old partition where 7 was afterwards.
View 4 Replies View Relatedi would like an application or modification for windows seven that adds a second taskbar, this taskbar is on the top of the screen and monitors programs you may open, however it would be much better organized that the start bar (in fact it is more like the desktop, mabey even folding out to cover your screen too). It also has a start bar included for the messy stuff.
View 8 Replies View RelatedWhen booted to 7 Disk Management shows the partition of 7 as C: (Boot,Page File Crash Dump, Logical Drive) and the Vista partition as D: (System, Active Primary Partition). Now I would like to remove the Vista partition and merge that to the 7 partition. I have searched around and have read many options of doing this but I can not find a definitive way of completing this.
View 7 Replies View RelatedI have a Dell Inspiron 15 System. It came with Windows Vista Home Basic when I purchased it 2 years back.I installed Windows 7 as a dual boot with windows vista on it(with tut from here ) and it ran very smoothly. I am happy with my dual boot system. But off late, I am facing problem of low hard disk space(as seen in SS). This is because most of programs like MS office, few games, Acrobat, Winamp etc are installed twice, one in C: (Vista) and once in D: (Win 7)Now I am very happy with 7 and want to remove Vista. Pls link me to a tutorial that can help me to remove it. I want to remove C: and E: (Vista's Recovery which came by default with system) I want to retain my existing programs, settings in win 7 as it is. Untouched. I want to merge those C and E into one.
View 6 Replies View RelatedI installed a new hard drive, and then installed windows to that new hard drive with the old one still connected and I now the two drives are somehow, linked so that if I remove the old drive, windows doesn't boot. When I reconnect the drive, windows boots up fine. I checked the boot priorities in the bios and its all as it should be.
I tried the windows repair disk, used the top option three times (as I've seen recommended on other forums), to no avail. I've tried the other options but the problem is, the windows installation is not detected, same with restore points, nothing works.
I think there's something to do with the Disk Management utility. I have the two disks, disk0 and disk1, disk1 is the disk I want to remove.
this is what the page looks like:
disk0 (boot, page file, crash dump, primary partition) disk1 (system, active, primary partition) + (8mb unallocated)
It seems the System-(thing?) is on disk1 so when i remove the drive, the computer doesnt boot. Makes sense. What doesnt make sense is that windows ISNT installed on that disk so why the hell is "system" on there and causing trouble??
Would making the partition on disk0 active solve my problem? I dont want to click on anything and break it so I ask here.
cannot boot into win 7, "Startup Repair" screen pops up. States to, "start window normaly" or "start Repair". Starting normaly repeats bringing upthis pop up box. "Repair" do nothing.
View 1 Replies View RelatedIs it possible to stop dual booting without formatiing my harddrive? My boot splash screen order is:Windows 7Windows VistaI want to delete my WindowsOLD direcorty and boot to Win 7 only.Win 7 and Vista are on the same partition.
View 9 Replies View RelatedI had recently installed windows 7 on my laptop running windows vista. I did not remove the existing windows vista installation, and thus win 7 was installed in a dual boot combination. Now, i want to remove vista from my laptop and use windows 7 only.The problem is that during installation, win 7 was installed on logical drive and windows vista was on the primary drive. Thus, i cannot delete/format the windows vista partition. Also I cannot transfer the boot drive to the partition containing win 7 because the vista partition is the active one.
View 6 Replies View RelatedI have been asked the question is it possible to have two internal hdd system disks and select which one at start up
View 9 Replies View RelatedI have 2 HDs in my tower, 1 has windows 7, and 1 has server 2008 R2. I installed the server OS to play around with Hyper-V but enver did and I want to remove it to throw a linux distro on it. What's the easiest way to fix the boot record to reflect that server 2008 isn't there anymore?
View 2 Replies View RelatedI originally had Vista on this PC and then dual booted it with win7pro. I'm upgrading my 2x 250GB to a single 2TG drive and will use the 2x250G for something else. To prepare for the transition to the 2TB I deleted the repartitioned and reformatted the HD vista was on. It will boot into win7pro if I have the win7pro DVD in the DVD drive. If it isn't I get no system disc error during boot. I had boot problems before but those times it was missing such and such file like BOOTMGR or NT something. Anyways the last time it was recommended to use EasyBDC. I'm sure EasyBDC can be used to solve this boot problem too I just don't know exactly what to do. The automatic boot recovery feature of the win7pro DVD doesn't solve it but then that feature has never solved the boot problems I had in the past either.
When EasyBDC first opens it sees win7pro on drive C: and lists no other entries.Under edit boot menu it shows only win7pro as I expected the check box to the right of it is checked and default is indicated "yes". I selected skip boot menu since it is the only OS choice now and clicked save. I went to BCD backup/restore section and selected change boot drive, clicked preform action, and chose C: and proceeded. Eventually a message came up and said it completed and to reboot. I still have the message no system disc unless the win7pro DVD is in the DVD drive.
I have multiple hard drives (not partitions) on my system. My new RAID-0 SSD has the Windows 7 install on it while my old WD Raptor has my vista boot on it. I have been trying to find a way to remove the old Vista drive as I want to reformat it and turn it into a developers drive (for my various PHP projects).
Is there any way to remove this drive so it doesn't effect the Windows 7 drive? I tried removing the drive and rebooting but it fails to boot. I can't reformat it regularly as Windows tells me it is a System Partition. I believe that since my system relies on the Vista disk to boot that this causes an issue right? Well how do I fix this issue if you don't mind me asking?
Drive C was an old IDE drive with XP on it. I installed and new SATA drive for WIN 7. Win 7 installed and activated just fine. Now I want to remove the Old IDE XP drive from the machine but the boot partition is on the IDE drive. I need to know how to remove the old drive and make the new SATA drive bootable into the Win 7 install on it.
View 4 Replies View RelatedI used a windows image in transfer my computer to a new ssd drive. The image copied even the hd size. The ssd is a 256 and my old hd was a 160. I now have 150gb boot section, a 100mb reserve and a 90gb unallocated space. what can I do to remove the partition and combine the space so I have access to the full drive? I searched and couldnt find anything.
View 4 Replies View RelatedI should know the answer to this question but my mind isn't working. I have done this before but can't remember how *exactly* I did it.
I took my sister's 150GB HD and set her up with a dual boot with Windows 7 and XP. She now wants me to take Windows 7 off and just use XP for a while. If I use a 3rd party partitioning tool to remove the Windows 7 partition FROM WITHIN XP, will this screw up the boot manager? I think it should be fine. Just take out the partition and extend the XP partition into the free space and it should just boot to XP. Is this correct?
So I upgraded to Windows 7 64 bit home edition. I am running a duel monitor setup, the primary monitor is a 24 inch monitor running at 1920 by 1980 and a 19 inch secondary monitor running at 1280 by 1024 (it's the highest resolution that monitor can do.) My video card is two SLI'd nvidia geforce 240 1gb cards.
Before I upgraded, I didn't have any issues with the two monitors (using extended desktop.) Now after the upgrade, the secondary monitor is not 'filling the screen'. It's squished the image up and is leaving one inch of the monitor on the left side empty. When you move the mouse between the two monitors it skips over that space as if it isn't there.
Now, it's not a fault with the monitor, I tried adjusting settings and the image remains squished. I also tried using the nvidia control panel to adjust the resolution manually but that doesn't seem to work either. I'm running the latest release version of nvidias drivers, haven't tried a beta yet.
Suggestions on how to get it to use the whole monitor again like it used to? Because this is really annoying.
Edit: Upon more fiddling, I have found it isn't using about half an inch of the screen on the right side of the monitor either. And the desktop is extended down below the base of the screen, though I cannot tell how far.
ihave windows 8 my lpatop is acer aspire E1-531, I am trying to install windows 7 but boot manager wont show me dvd boot !! it show me only network boot what can i do to be able to boot from dvd
View 2 Replies View Relatedjust built a new rig. Installed windows on a fresh HDD, using the old hdd for data and stuff but the old windows is still on it, promting me every time i boot to select OS and taking up space
View 7 Replies View RelatedI do an annual windows reinstall from an iso I made of the windows boot CD when I bought windows 7. I made the iso because it's easier to keep track of files rather than CDs, and whenever I would need to reinstall I would burn the iso to a disc, install from the disc, and throw out the disc once the install was complete. Well tonight I ran out of CDs with a large enough capacity to hold the iso, so I decided to get a bit fancy.
I mounted the iso and ran the setup utility through windows, and had it install a new partition of windows to one of my unused storage drives. The install went well, I restarted, and saw that there was an option to boot from two partitions of windows 7. I eventually figured out which one was the new one, and once desktop loaded up I went into msconfig and removed the old partition from the boot tab.
The problem pops up when I went back to reformat the old partition. It gave me an error stating that it cannot format a system drive. I figure that this is because the old partition is still active somehow even though I removed it from the msconfig boot menu.
Through a bit of googling I got a general idea of what had to be done, so I went into disk management and set the new partition to 'active'. I then restarted and went into BIOS, and switched the disk boot order so that the new partition came before the old partition. My bios did not like this, because it gave me an error about NTLDR missing. So it almost appears that the NTLDR thing isn't on the new partition, but that's just a guesstimation.
Other information:
- Old partition is "disk 0" in disk management
- New partition is "disk 1" in disk management
- I cannot modify or delete any of the system files on the old partition when I'm booted in the new partition.
My husband has started up his new windows 7 Toshiba laptop and put a password in. Is there any way in which this can be removed? I think that it must have face recognition, as his password doesn't work for me. Either of us can get into *my* Vista laptop (set up by an 'expert')and we wanted theis to be the same.Most annyoying as I was meant to be organising the internet connection etc while he was out and I have only got as far as making the recovery disks before I left it for 30 minutes and it turned itself off.
View 2 Replies View RelatedI installed Win 8 preview on my system using Oracle VM, however it loaded the virtural HD on a disk I didn't want the VM or Win 8 preview on. Is there a way to delete all of this and get my HD space bac
View 3 Replies View Related