Reinserting Flash Drive Into Reinstalled Computer?
Aug 13, 2012
For awhile now my mouse has been very erratic, and I want to reinstall my comp to rid the problem. My antivirus & Malwarebytes' are not finding the problem.
With all my files now on a flash drive, is it possible to re-contract whatever is giving me mouse problems when I stick the drive back in a fresh installed comp? I highly doubt it, but I want another person's opinion.
View 3 Replies
ADVERTISEMENT
Jun 14, 2012
I have an issue where my flash drive periodically won't show up in My Computer... when I insert it, I hear the 'hardware insert' sound but no drive in my computer and no autostart. it doesn't show in device manager and clicking 'refresh' does not make it show up! if I remove the flash drive, the drive appears in 'my computer' for a second then disappears... the same problem occurs when I plug it into another port... I have four ports, only three of them are not used by something plugged in permanently... usually I have to insert the flash drive into random ports at least 5 times before it displays the drive...
View 6 Replies
View Related
Feb 3, 2013
I have a 8 GB Transcend flash drive. I works properly on other systems (at least one system), but when I plug it in my Laptop, it is not even detected. Other USB devices work perfectly with my laptop, the only problem is with my Flash drive AND my laptop. I have tried to re install USB Hubs etc. of the laptop, but it did not help.
View 6 Replies
View Related
Jul 11, 2012
My computer has had a bad case of the shut downs here recently so i cracked open the case and checked things... it turned out that my heat sink was loose and almost completely off of my CPU.Easy fix right??? I took both off cleaned em up really good applied new thermal compound and put it all back...THAT'S ALL I DID. Now when i press my power button:
1. My light for my power button doesn't come on
2. It doesn't sound like normal...at all...much quieter
3. My screens don't even come up with anything. I've tried going to the Mobo VGA port thinking that it might have reset...that's not the case either.
View 9 Replies
View Related
Jul 1, 2012
I have HP G42 laptop ...recently it showed up a msg called bootmgr is corrupted n was redirecting to ctrl+alt+del to restart....so i didnt format the drive but just installed windows again in the same drive ...but i didnt find the other data previously i had stored..
View 2 Replies
View Related
Aug 9, 2011
By "blank" I mean an empty laptop hard drive. I'm going to have my hard drive replaced, so I believe the new hard drive won't have an operating system installed on it. So if I create a system image and store it in an external HDD, will I be able to reinstall the OS simply py plugging the external HDD into the laptop ?
View 2 Replies
View Related
Dec 31, 2012
I have an HP laptop. I had to reinstall Windows 7. The hard drive has about 300 GB. After the install, the C drive is showing 39 GB and 99% full.
View 9 Replies
View Related
Jul 23, 2011
I recieved a Dell Insipron 1545 about a year and a half ago, with windows 7 pre-installed on it. Unfortunate circumstances have led me to have to reinstall windows 7 on my laptop. When I did (With the installation disks that came with my laptop) It kept sending me notifications that my recovery drive was full, and everything I tried to save would automatically attempt to save on the recovery drive and fail. Thus my laptop is almost useless because I can't reinstall any of my programs, games or transfer my pictures, videos and documents back onto it.
I was promted to try and reinstall again, but this time specify that is be saved in the OS drive, not the recovery drive. I did this and it only led to the exact same results.
View 2 Replies
View Related
Jan 17, 2013
How can you copy one flash drive to another flash drive,on the same computer?
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X4 630 Processor, AMD64 Family 16 Model 5 Stepping 2
Processor Count: 4
RAM: 3839 Mb
Graphics Card: ATI Radeon HD 4200, 256 Mb
Hard Drives: C: Total - 702932 MB, Free - 657555 MB; D: Total - 12368 MB, Free - 1523 MB;
Motherboard: FOXCONN, 2AB1
Antivirus: Norton 360, Updated and Enabled
View 4 Replies
View Related
Oct 28, 2012
A few months back, I reinstalled windows after updating my bios.I screwed things up pretty badly because instead of just setting the Bios options to recognize my RAID array and though there was some bigger issue at play an ended up reinstalling windows before I figured it out. Anyway, everything worked fine for a few months, but then this not genuine box started appearing and disappearing in the bottom corner. It does go away, and I am able to install updates, so I think it's just an error with my bios as I saw in another thread, but I want to make sure before I touch anything. I ran the diagnostic report a few minutes back when the logo was down there (although it's since gone away again). [code]
View 1 Replies
View Related
Oct 8, 2012
Before I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
View 4 Replies
View Related
Sep 26, 2012
I know, should have a backup, I was actually about to create a backup when the flash drive failed on me unfortunately. My newest backup is from about 5 days ago, so I'd prefer to be able to restore the current files.
I moved the drive over to another computer and tried to save a file but when I checked again the file was gone, like it never saved at all. Subsequently, after removing and plugging it back in the computer did not detect the drive (or see it in disc management). It does show up as a generic USB drive in the device manager, but there are no properties for it.
When I add it to a computer, it still adds drivers for it, but then nothing happens after that. It may also be a hardware problem, since the drive fell on the ground pretty hard a while back, but seemed to be working fine. There isn't an easy way to open it up and check.
I also tried using a few data recovery programs, but they couldn't detect the drive either.
View 1 Replies
View Related
Nov 14, 2012
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies
View Related
Jan 5, 2010
I recently ran into a very weird windows 7 bit problem after installing it on my desktop. I cannot copy large files/ holders into usb flash drive or write large files to cd/ dvd. The copying/ moving process would stay on for about 5-10 seconds then freezes then I get an error message. That is:
H: refers to a location that is unavailable. it could be on a hard drive on this computer...
I have all the latest drivers.
And windows/ nero 9 can't use my dvd drive to burn files.
Some info about my system: AMD X4 630 CPU. MSI KA780G (AMD 780G chipset) mobo. I have 2 sata hdds, non raid mode. The DVD drive is IDE. 4gb ram ddr2 ram. windows 7 64 bit.
View 9 Replies
View Related
Aug 28, 2011
When I put a flash USB drive in my Windows 7 machine it gives a beep and tells me that the drivers have been loaded and the drive is ready for use.But I can't see it anywhere, it shows in 'Devices and Printers' but won't open from there.How do I get it to show up when I open 'Computer' from the Start button please.Tech Suppot Guy System Info Utility version 1.0.0.1OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bitProcessor: AMD Phenom(tm) 9950 Quad-Core Processor, x64 Family 16 Model 2 Stepping 3Processor Count: 4RAM: 3583 MbGraphics Card: ATI Radeon HD 3600 Series, 512 MbHard Drives: C: Total - 305141 MB, Free - 183571 MB; E: Total - 953867 MB, Free - 669909 MB; Motherboard: ASRock, N68C-S UCC,,Antivirus: Microsoft Security Essentials, Updated and Enabled
View 14 Replies
View Related
Apr 20, 2012
I have a staples relay flash drive on my dell latitude E-6500 I have down loaded info on it and when I try to recover the info i get no message or icon to tell me it is working I bought it 2 months ago could you tell me what the steps are to use it?
View 1 Replies
View Related
Mar 19, 2012
Downloaded MP3 Rocket from Cnet but requires a flash player 11. Downloaded it but kept getting a mesage: "A newer version already installed" which is not true. Tried to install an older version but Adobe won't let me install it as it says there is a new version of it.By the way, I had Adobe Flash Player before and it worked!
View 3 Replies
View Related
Jul 29, 2011
I just purchased a new USB 256 GB flash drive to transfer documents from my desktop to the flash drive after the process completed I rebooted the computer when I opened my computer the flash drive was showing invalid characters when I opened a flash drive document they also had invalid characters labeled to them and I get the following error " The filename, directory name, or volume label syntax is incorrect."
View 14 Replies
View Related
Aug 4, 2011
I unfortunately forgot my windows 7 password of my netbook. However, I was able to find this bootable iso image that removes and windows password. it works great when burnt on a cd and booted from bios but as u know netbooks dun have cd drives. so my qeustion is is there a way to burn the iso image to a usb flash drive from which i can boot from it?
View 1 Replies
View Related
Dec 20, 2012
I tried to install Malwarebytes Anti-Malware on a flash drive to be able to run it on another computer but I get an error message. It appears that the data file containing the list of possible infections was installed on my C: drive. Is it possible to run this program on another computer from a flash drive? The error I receive is 'Run time error 13...Type mismatch'.
View 7 Replies
View Related
Jan 22, 2013
i have a question looking for the best light Win7 version and if there is chance someone to explain me how to boot it on my USB flash drive.
View 2 Replies
View Related
May 26, 2011
How do I download a file from a flashdrive to Windows 7? I did this once before with no problem, but for some reason was unable to correctly do it today.
View 9 Replies
View Related
Jun 8, 2011
Is there a way I can partition my USB flash drive without any third party tools? And, is there any way I can use an autorun.inf file in Windows 7? It works fine in XP and Vista but what about windows 7? I have a batch file on it where it will run silently and take a users documents and transfer the files to the USB.
View 1 Replies
View Related
Aug 8, 2011
If I plug my flash drive into my PC using Windows XP, it works fine.No problems.But when I plug it into my laptop, using Windows 7 it will not load it.It says newhardware detected, installing new hardware, Hardware installation failed.If I go Device Manager, It is listed under Unknown Devices.I have tried to uninstall all the USB Root Hubs, Restart the computer, in-order for it to auto re-install with the USB in / out of the computer. But it still fails.
View 4 Replies
View Related
Nov 4, 2011
about my a4tech pocket usb when i plugged it to my toshiba satellite e1802 it read as generic usb but when i plugged my usb flash drive it doesnt read by my a4tech pocket usb hub.
View 2 Replies
View Related
Nov 26, 2011
I know that this question is not associated with this topic but i need help.Ive typed in following command in command prompt bootsect /nt60 and my flash drive is not readable any more...is there any command to reverse mentioned command?I was trying to make bootable usb drive and now i cant access my usb flash anymore and i had some important files on that flash.
View 1 Replies
View Related
Apr 18, 2012
I have never needed to do this before, so I have no knowledge on the subject. I have a user who will be taking data home once a week, so I want to encrypt or at least password-protect her flash drive. It will contain regular, typical Office documents.Now, the tricky part is, she has a Dell PC running Windows 7 Pro in the office, and a Macbook laptop at home (not running any version of Windows). Does something exist, especially free, that will allow me protect her flash drive, and make it accessible to her on either computer?I need to do this for now, temporarily. I'm trying to convince my CEO that DropBox and others are just as safe and roughly the same process....but for now, I have to make the flash drive work.
View 4 Replies
View Related
Jun 30, 2012
I installed the Chrome OS IMG file on my flash drive and tried to boot from it, but it turns out my flash drive is now un-recognizable. I tried assigning a different drive letter in computer management, but it doesn't show up there. Sometimes it will show up and Windows will say that I need to format it, but the format always fails.Other flash drives are recognized by my computer. I am using a Lexar Jump Drive, but I'm not sure what model it is.
View 1 Replies
View Related
Aug 7, 2012
explicitly creating bad sectors in a flash drive. Is making bad sectors possible by repeadly disconnecting flash drive during file write process? How can a flash drive develop bad sectors in its memory ?
View 6 Replies
View Related
Nov 2, 2012
Have a Sandisk 32 GB USB Flash Drive that I use for selective storage of certain files.If I purchase a Sandisk 64 GB to make a complete backup will I have to configure each one every time I swop usage.Why I ask this is that when I tried to introduce the new Sandisk to my laptop it could not be recognised as my computer was still configured to my old Verbatim 4 GB USB.
View 4 Replies
View Related
Jan 3, 2013
I have a 8 GB USB Flash Drive which shows up as "Disk 1" in Disk Management but never comes "Online". I tried changing the drive letter and double-clicking in Explorer. But it says "Please insert a disk into Remove Disk (I". When I try to format, it says "There is no disk in drive I:. Please insert a disk and try again."I tried HP USB Disk Storage Format Tool but it says "There is no media in the specified device."
View 7 Replies
View Related