Win7 64 bit. system restore fails, error: 0x80070005. Says it can't read registry.
Tried disable-ling Norton Internet Security, same thing.
Winamp player says it can't read registry either. Each time it starts.
Purchased RegCure it said it could fix problem. Ran scan many times...it said it fixed all errors each time it found fewer errors, till 0.
Problem is still there.
I Don't Need Use Your Uninstaller or Revo Uninstall But I Need Use CClearner. How to Use It For Delete Registry After Remove Some Programs In Add/Remove In Control Panal or Unuse Items ?
One More Question.. About System Locale .. I Seletct English (US) @ Windows Install Screen. But Now I Need Change It << I Can do It ? Is No Bad Result After Change Because Is Not Original Locale Install [English (US)] ?
I was using a program called NoLimits and Google Chrome on my Windows 7 computer. After about 30 minutes or so, all the programs was not responding.
After about 5 minutes or so, the screen shook and lines were on it. After that, I got the Blue Screen Of Death.
I restarted the computer. After the dell logo and below your computer type (Inspiron, Inspiron One etc), (before you see the Windows Error Recovery screen) I got an error message that said "A disk read error occurred. Press Ctrl+Alt+Del to reRECOVERY."
When I press Ctrl, Alt and Delete, The computer restarts and I get the same error message. Then, I have to shut down the computer and leave it off for at least an hour.
After an hour, I turned on the computer and I did not get the error message. After I logged in, I scanned for viruses, spyware and malware with the latest versions of all my antivirus programs and no was found. I tried everything I could do and none of them worked. I am posting this thread on my iMac computer with Mac OS X Snow Leopard 10.6.7.
I've unistalled Amd Driver from Device Manager, Unistalled Catalyst software and ran Driver Sweeper. There is only 3 registeries that the Driver Sweeper CAN'T delete and these are under SYSTEM folder. I've tried to change user privilegies but this far I've not succeeded.
View 5 Replies View RelatedWhile windows was uploading some updates yesterday, I cleaned my registry using Iolo's system mechanic tool and that's where the problems started. (I already read and understood your message: don't use those tools and stay out of your registry. A lesson I learned too late, unfortunately.)My computer rebooted and after a couple of minutes I noticed the message: " failure configuring windows features reverting changes ". I managed to bypass this loop by running in safe mode and recover my computer to a restore point in the past. This only worked partially: I get windows to run in normal mode but I get this message: "system failed while restoring the registry from the restore point. Restore point damaged or was deleted during restore". So it didn't restore but I can get into my windows now.So I don't get the 'reverting change loop' anymore, so I can access my computer but what's the mess? Well my computer is slow as hell.Like mentioned above, I already looked around on this forum and wrote down what I already tried. [code] My computer is terrible slow because of a registry defrag/optimization of a registry tool (in combination with windows update) --> I need to find a way to get back my old registry files but system recovery ain't working.
View 9 Replies View Relatedchange it to read and write mode, and also to remove write procted in it.
View 1 Replies View RelatedWhat's the best type of DVD to use for read-only and read/write applications? I'm a little out-of-date on this, haven't bought any in awhile. I remember things like DVD-R/RW and DVD+RW and such. I have a new machine running Win7, and an older laptop running XP.
View 10 Replies View Relatedmy dvd writer reads cds but not DVDs in windows 7
View 2 Replies View RelatedTLDR: I get the "A disk read error occurred" error but the system disk is readable and checks OK in the recovery USB. So, I have two hard drives--a terabyte drive with some data on it and a smaller drive with the Windows 7 installation on it--and a USB drive. I made the USB drive into a recovery USB using the instructions here Installing Windows 7 System Recovery into USB Flash Drive | Raymond.CC Blog with the addendum found in the comments. I made a system image of the smaller drive via the control panel and then put the image in the terabyte drive. I then replaced my smaller hard drive with a new drive of a comparable size.In order to restore the drive, I booted into the recovery USB, formatted the new hard drive with ntfs, made it active, and ran wbadmin start recovery -version:xxx -items:C: -itemtype:Volume -backupTarget:C: -recoveryTarget: where C was the terabyte drive and D is the new drive. I may have the drives mixed up here, but I assure you I had them correct when I actually ran the command
After a reset, I got some generic error so I went back into the bios, and set the new drive to be at the top of all boot lists, and then rebooted. It was at this time I got the above error. I feared that my drive was actually DOA, so I booted back into the recovery. I did a D:;dir and saw that all of my old files did indeed exist, so I figure it was a boot issue. I ran the boot repair utility in the recovery menu and it said there were no errors and I should restart. I didn't restart, and instead ran a chkdsk D: /f and found no errors. I did a bootsect /nt60 /all /mbr and restarted and still nothing changed. I even tried a "bcdedit /timeout 10" and I do not see the boot loader before getting this error. Not sure if that is expected or not but I'll throw that in here.
my laptop can't read cd or vcd disk but dvd disk can read and write
View 3 Replies View RelatedNo matter how many times I launch Skype or iTunes, they just won't get added to the Start Menu's Recent Programs list.
View 9 Replies View RelatedSo over the past few days it seems that I have lost control of my C drive and all of its contents.I can no longer properly access it, and everything opens in "Read-Only". I can no longer install programs or modify existing programs.According to the security permissions, I have none. Nor can I change my permissions because in order to change them I need access to the C drive, which I don't have.I have tried creating other users and putting them in the admin group, etc. but nothing is working.
View 2 Replies View RelatedToday I decided to install some stuff on my computer as it was out of date..I installed Java, Flash player and adobe reader X but when I go to add/remove they are not showing up in that section?
View 9 Replies View RelatedEvery time I start up normally into Win7 everything is fine for a couple of minutes. I'll open a few programs, then after a few minutes of them running they'll hang and enter the 'not responding' mode. (firefox, steam, IE). If I don't already have task manager running the system will basically be unresponsive and the only thing I can do is reboot manually. If I have task manager running I can sometimes end a process or two but some will remain open & unresponsive. Any programs that are working (including task manager) disappear when I minimize them and no programs appear on the task bar, (though they can be retrieved with alt+tab).
McAfee also has 'real time scanning' permanently disabled.
This is all very strange as there was nothing wrong four days ago when I was away, and the symptoms occured within 2-3 minutes of booting up this evening. The system runs in safe mode.
how do I access my computer (Registry) and clean it?, I don`t know how to access my registry How do I clean it? I uses Toshiba laptop.
View 6 Replies View RelatedI have a 60GB SSD that I have my operating system on and I have a 1TB regular Hard Drive that I wanted to have all my basic programs on. Once the operating system/drivers/etc were installed on the SSD drive I changed the registry so that the default filed installation location was the 1TB drive instead (because some files/programs don't ask what location you'd like to install them to). Afterwards I restarted the computer after installing a program. Now tons of my system 32 system files/programs wont open even though they're there. I get an error message saying "Windows could not find 'C:Windowssystem32egedt32.exe' Please make sure you typed the name correctly, and try again."
This is the second time it has done this. The first time I had installed a few more programs before restarted so I thought maybe somehow I got a virus that disabled some of my registry permissions. But all this stuff I can't open IS still there, but because I changed this the ProgramDefDir registry now it can't find this stuff. After this first time when I thought it was a virus I just went ahead and reformatted and reinstalled windows, but I noticed as soon as I restarted after changing the registry the way I wanted it before, the same problem occured.So, 2 questions come from this: first, how can I fix this? i.e. changed the registry back WITHOUT the default regedit program as it wont let me use it.. second: How can I do what I want efficiently without creating this problem? i.e. OS on SSD and every other program, music, and such on the 1TB drive?
About a week ago I tried to install Cyberlink Power DVD 10.I kept getting error message 1625,this installation not allowed due to system policy. I've gotten conflicting solutions and still no luck. As of today I tried messing with the registry and local policies etc...long story short, I cannot get past my "Starting Windows" window. It powers down, then powers back up and gives me the options of 'start windows normally' or 'repairs'. It will not start normally nor can it repair the problem. Have I done something heinous and can it be reversed? Is there a way to get it into safe mode, back to my desktop so I can restore the backed up registry.
View 1 Replies View RelatedI've searched a bit here and there on the net regarding excluding certain folders and its contents from Windows Backup, since I would like to use Windows Backup to make a system backup without any user files, and use a seperate utility for backing up the user files.So I found out about this "FilesNotToBackup" string in the registry, and according to what I read, I can put full paths in there to exclude with the wildcard *.* /s. Which I did.But I found out it's not working, so it still includes the folders I added to that registry key to the system backup image. I noticed the system image in the "WindowsImageBackup" folder is the same size as the space used on my OS disk.
View 2 Replies View RelatedMy new work computer, running Windows 7 is now unable to install software. I get various error msgs towards the end of installations. Usually some component or dll cannot be found. Aside from this inconvenience my system seems to be running smoothly. Our IT support guys have examined the system and have determined that my registry has become corrupt. They want to take my system and reformat it, and also run some intense hardware diagnostics. This is the second time this has happened in two months. I suspect these guys are just taking the easy option of reformatting rather than actual trouble shooting.
View 9 Replies View Relateddoes any know where in the registry this icon please? i would like to change it! Windows 7 64bit SP1
View 2 Replies View RelatedWhenever I log on I don't see my own background, but just a regular Windows 7 background.Also, a lot of my icons are gone and the menu is in English, though it used to be in Dutch.I found out that I sould go to registry (regedit.exe) and than go to HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows NT/CurrentVersion/Profilelist.The next step was to delete one of the keys and rename the one with the same name +.bak (get rid of the .bak).But when I try to do so, I get an error, it says: cannot delete <name of the key>: Error while deleting key. So, I've tried to get permission by allowing full control, but than I get another error saying: Unable to save permission changes on <name of the key>. Acces is denied.what can I do to get access to registry? Is there anything left to do or is it best to just start a new account?
View 1 Replies View RelatedIve used DOS then Windows all my computing life (which happens also to be all my life) and i recently converted over to primarally using Unix Derivitives. Now Unix derivitives such as linux have a etc directory which stores all the conf and unmarked configuration files while DOS uses interdirectory INI files for configuration... WHile windows uses INI files, appdata directories in each user directory, a program data root directory, configuration directories in the windows/system32 directory AND the registery...... What is the point of it all, the registery is a great single point of failure and its redundant.
View 4 Replies View RelatedI have been trying to understand the registry in windows 7. From what I read, the registry is the foundation of windows. Without those foundations, windows 7 could not work. How do i keep the registry keep and stable ? I came to the conclusion that it is impossible. Am i correct in saying that keeping the registry clean and stable is an impossible task ? Even more so secure. I am now using a piece of software that i bought to handle the registry for me. Once a week i run the software and once a week it corrects the errors that need to be corrected. In particular, i always have a lot of "COM/AcitveX/OLE" entries and "Empty Registry Keys". I do get "Empty Registry Keys". There are piece of software there were installed and then erased. When erased, some bits and pieces were left in the registry (something like that). What are COM/ActiveX/OLE ?Finally, I think WINDOWS is the most complex piece of software i have ever come across. I think it is so complex that an entire eco-system was built around it to make you shell out more cash:i.e. registry cleaner, anti-virus etc...
View 8 Replies View RelatedIs a registry cleaner necessary? On almost all of them I've used, it detects tens or hundreds of "problems" that need to be fixed, on freshly installed systems too. And after fixing them, if I run another scan, it finds even more! Does it make my system "faster" in any noticeable way? It seems to cause more problems than it fixes.
View 9 Replies View RelatedI have a large application written in .net 1.1. this app needs to read and write to the registry. On windows XP this works flawlessly but on windows 7 it fails with no error message. simply, windows 7 will not let my dot net app read or write to the registry even if logged on as an administrator How can I set application security to allow my app to read and write to the registry regardless of the security level of the user.
View 3 Replies View RelatedI have just bought a new acer aspier 5750z-4830 intel core b940 processor 4gb ddr3 memory 500 gb hdd 3 days ago and I am unable to install any new programs.I have tried to download meny sotwer not at the same time but the results are horrable.google chrome: 7 hours and never downloads. yahoo mesenger: connection is always lost and retrys never work. when i click cancle it says that it maybe my firewall but even when i allow the progrom through it won't work. so i turned if off for a little while still nothing. java: my laptop dose not come with java so i tried instlling it...121 hours to install this is rediclious.The download speed may not be so good right now beacuse we where hit by a storm 3 days ago however i have to ability to downlod but not the ability to install which i think is a bit weird
View 3 Replies View RelatedI have one file with me its called test.reg i want to encrypt this file coz if some one want to open then he can open easily in notepad then he/she can see what it do.. so i want to to encrypt my reg file. if any one will double click on it it will save as to register.. so let me know how to encrypt my file..
View 1 Replies View RelatedToshiba Satellite 655, 64 bit OS, Intel. Celeron CPU 925@2.30 GHz
View 6 Replies View RelatedI have been using a registry cleaner that has removed some system keys. The computer runs most stuff okay, but I am getting some failures on things like the window that used to come up and ask what to do when I plugged in a usb. Researching this is how I found that some registry keys were missing. I have been trying to get to the install / repair the exsisting winows part of the install cd that comes up when installing the program. I did it once before, but haven't been abble to get there again. I am not talking about the first repair options that come up at first, like restore from a restore point or from a system image. It's the one that comes up during the install process where you can choose a drive and format. The repair choice in that section uses the install cd and not a backed up file. The registry cleaner I was using did back up the registry every time it was run, but replaced it with the new back up each time. and the system image was replaced a few days ago, so no help. By the way, I no longer use the registry cleaner
View 6 Replies View RelatedI got admin rights to edit the registry (and I've edited it before), but I've never 'created' registry items.I need to create this item:Quote: [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplor er]"NoSaveSettings"=dword:00000001
View 5 Replies View RelatedW7 x64 ult OS. Something went wrong.My system will no longer boot - the error message lists registry corrupt. I am 99% sure it is not a virus.I have another drive with a W7 system on it in the same box and I can boot from that.It is just a basic clean install test system, but I can access all the drives.Is there a backup registry file I can use to replace the corrupt one........and which files are the registry?Is there anything else to do to recover othere than a clean install?I can't do a repair install because it has to boot to the system first.Unless. Can I do a repair install on the bad drive from a boot to the good drive?
View 8 Replies View Related
