FilesNotToBackup Registry Key?
Sep 16, 2012
I've searched a bit here and there on the net regarding excluding certain folders and its contents from Windows Backup, since I would like to use Windows Backup to make a system backup without any user files, and use a seperate utility for backing up the user files.So I found out about this "FilesNotToBackup" string in the registry, and according to what I read, I can put full paths in there to exclude with the wildcard *.* /s. Which I did.But I found out it's not working, so it still includes the folders I added to that registry key to the system backup image. I noticed the system image in the "WindowsImageBackup" folder is the same size as the space used on my OS disk.
View 2 Replies
ADVERTISEMENT
Dec 6, 2011
I've unistalled Amd Driver from Device Manager, Unistalled Catalyst software and ran Driver Sweeper. There is only 3 registeries that the Driver Sweeper CAN'T delete and these are under SYSTEM folder. I've tried to change user privilegies but this far I've not succeeded.
View 5 Replies
View Related
Jun 16, 2012
While windows was uploading some updates yesterday, I cleaned my registry using Iolo's system mechanic tool and that's where the problems started. (I already read and understood your message: don't use those tools and stay out of your registry. A lesson I learned too late, unfortunately.)My computer rebooted and after a couple of minutes I noticed the message: " failure configuring windows features reverting changes ". I managed to bypass this loop by running in safe mode and recover my computer to a restore point in the past. This only worked partially: I get windows to run in normal mode but I get this message: "system failed while restoring the registry from the restore point. Restore point damaged or was deleted during restore". So it didn't restore but I can get into my windows now.So I don't get the 'reverting change loop' anymore, so I can access my computer but what's the mess? Well my computer is slow as hell.Like mentioned above, I already looked around on this forum and wrote down what I already tried. [code] My computer is terrible slow because of a registry defrag/optimization of a registry tool (in combination with windows update) --> I need to find a way to get back my old registry files but system recovery ain't working.
View 9 Replies
View Related
Aug 12, 2011
how do I access my computer (Registry) and clean it?, I don`t know how to access my registry How do I clean it? I uses Toshiba laptop.
View 6 Replies
View Related
Nov 18, 2011
I have a 60GB SSD that I have my operating system on and I have a 1TB regular Hard Drive that I wanted to have all my basic programs on. Once the operating system/drivers/etc were installed on the SSD drive I changed the registry so that the default filed installation location was the 1TB drive instead (because some files/programs don't ask what location you'd like to install them to). Afterwards I restarted the computer after installing a program. Now tons of my system 32 system files/programs wont open even though they're there. I get an error message saying "Windows could not find 'C:Windowssystem32egedt32.exe' Please make sure you typed the name correctly, and try again."
This is the second time it has done this. The first time I had installed a few more programs before restarted so I thought maybe somehow I got a virus that disabled some of my registry permissions. But all this stuff I can't open IS still there, but because I changed this the ProgramDefDir registry now it can't find this stuff. After this first time when I thought it was a virus I just went ahead and reformatted and reinstalled windows, but I noticed as soon as I restarted after changing the registry the way I wanted it before, the same problem occured.So, 2 questions come from this: first, how can I fix this? i.e. changed the registry back WITHOUT the default regedit program as it wont let me use it.. second: How can I do what I want efficiently without creating this problem? i.e. OS on SSD and every other program, music, and such on the 1TB drive?
View 8 Replies
View Related
Jun 6, 2011
About a week ago I tried to install Cyberlink Power DVD 10.I kept getting error message 1625,this installation not allowed due to system policy. I've gotten conflicting solutions and still no luck. As of today I tried messing with the registry and local policies etc...long story short, I cannot get past my "Starting Windows" window. It powers down, then powers back up and gives me the options of 'start windows normally' or 'repairs'. It will not start normally nor can it repair the problem. Have I done something heinous and can it be reversed? Is there a way to get it into safe mode, back to my desktop so I can restore the backed up registry.
View 1 Replies
View Related
Jul 11, 2012
My new work computer, running Windows 7 is now unable to install software. I get various error msgs towards the end of installations. Usually some component or dll cannot be found. Aside from this inconvenience my system seems to be running smoothly. Our IT support guys have examined the system and have determined that my registry has become corrupt. They want to take my system and reformat it, and also run some intense hardware diagnostics. This is the second time this has happened in two months. I suspect these guys are just taking the easy option of reformatting rather than actual trouble shooting.
View 9 Replies
View Related
Sep 22, 2012
does any know where in the registry this icon please? i would like to change it! Windows 7 64bit SP1
View 2 Replies
View Related
Mar 4, 2011
Whenever I log on I don't see my own background, but just a regular Windows 7 background.Also, a lot of my icons are gone and the menu is in English, though it used to be in Dutch.I found out that I sould go to registry (regedit.exe) and than go to HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows NT/CurrentVersion/Profilelist.The next step was to delete one of the keys and rename the one with the same name +.bak (get rid of the .bak).But when I try to do so, I get an error, it says: cannot delete <name of the key>: Error while deleting key. So, I've tried to get permission by allowing full control, but than I get another error saying: Unable to save permission changes on <name of the key>. Acces is denied.what can I do to get access to registry? Is there anything left to do or is it best to just start a new account?
View 1 Replies
View Related
Jul 4, 2012
Ive used DOS then Windows all my computing life (which happens also to be all my life) and i recently converted over to primarally using Unix Derivitives. Now Unix derivitives such as linux have a etc directory which stores all the conf and unmarked configuration files while DOS uses interdirectory INI files for configuration... WHile windows uses INI files, appdata directories in each user directory, a program data root directory, configuration directories in the windows/system32 directory AND the registery...... What is the point of it all, the registery is a great single point of failure and its redundant.
View 4 Replies
View Related
Sep 25, 2012
I have been trying to understand the registry in windows 7. From what I read, the registry is the foundation of windows. Without those foundations, windows 7 could not work. How do i keep the registry keep and stable ? I came to the conclusion that it is impossible. Am i correct in saying that keeping the registry clean and stable is an impossible task ? Even more so secure. I am now using a piece of software that i bought to handle the registry for me. Once a week i run the software and once a week it corrects the errors that need to be corrected. In particular, i always have a lot of "COM/AcitveX/OLE" entries and "Empty Registry Keys". I do get "Empty Registry Keys". There are piece of software there were installed and then erased. When erased, some bits and pieces were left in the registry (something like that). What are COM/ActiveX/OLE ?Finally, I think WINDOWS is the most complex piece of software i have ever come across. I think it is so complex that an entire eco-system was built around it to make you shell out more cash:i.e. registry cleaner, anti-virus etc...
View 8 Replies
View Related
Aug 7, 2011
Is a registry cleaner necessary? On almost all of them I've used, it detects tens or hundreds of "problems" that need to be fixed, on freshly installed systems too. And after fixing them, if I run another scan, it finds even more! Does it make my system "faster" in any noticeable way? It seems to cause more problems than it fixes.
View 9 Replies
View Related
Jun 9, 2011
I have a large application written in .net 1.1. this app needs to read and write to the registry. On windows XP this works flawlessly but on windows 7 it fails with no error message. simply, windows 7 will not let my dot net app read or write to the registry even if logged on as an administrator How can I set application security to allow my app to read and write to the registry regardless of the security level of the user.
View 3 Replies
View Related
Dec 11, 2011
I have one file with me its called test.reg i want to encrypt this file coz if some one want to open then he can open easily in notepad then he/she can see what it do.. so i want to to encrypt my reg file. if any one will double click on it it will save as to register.. so let me know how to encrypt my file..
View 1 Replies
View Related
Sep 1, 2012
Toshiba Satellite 655, 64 bit OS, Intel. Celeron CPU 925@2.30 GHz
View 6 Replies
View Related
Nov 21, 2012
I have been using a registry cleaner that has removed some system keys. The computer runs most stuff okay, but I am getting some failures on things like the window that used to come up and ask what to do when I plugged in a usb. Researching this is how I found that some registry keys were missing. I have been trying to get to the install / repair the exsisting winows part of the install cd that comes up when installing the program. I did it once before, but haven't been abble to get there again. I am not talking about the first repair options that come up at first, like restore from a restore point or from a system image. It's the one that comes up during the install process where you can choose a drive and format. The repair choice in that section uses the install cd and not a backed up file. The registry cleaner I was using did back up the registry every time it was run, but replaced it with the new back up each time. and the system image was replaced a few days ago, so no help. By the way, I no longer use the registry cleaner
View 6 Replies
View Related
Jan 28, 2011
I got admin rights to edit the registry (and I've edited it before), but I've never 'created' registry items.I need to create this item:Quote: [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplor er]"NoSaveSettings"=dword:00000001
View 5 Replies
View Related
May 28, 2011
W7 x64 ult OS. Something went wrong.My system will no longer boot - the error message lists registry corrupt. I am 99% sure it is not a virus.I have another drive with a W7 system on it in the same box and I can boot from that.It is just a basic clean install test system, but I can access all the drives.Is there a backup registry file I can use to replace the corrupt one........and which files are the registry?Is there anything else to do to recover othere than a clean install?I can't do a repair install because it has to boot to the system first.Unless. Can I do a repair install on the bad drive from a boot to the good drive?
View 8 Replies
View Related
Aug 3, 2011
Best registry cleaner window 7
View 9 Replies
View Related
Jun 1, 2012
I received Don's permission to tell you about this program. It is for the average user like me who cannot run ERUNT on Win 7 with a schedule and without the hard workarounds.It is being released from Beta Sunday June 3rd '12'.I have system restore and Acronis but sometimes you cannot get to system restore from within windows or for corruption issues and Acronis takes awhile.This can be found @ tweaking.com where the owner, Shane has developed this for the normal user. Read the threads about it, watch the videos etc. It is so ez with three tabs to backup, restore and settings. There are even shots to show you how to restore if youcan't boot up. The last part was too hard for me so he made it easier. I only know him because he replied to my request for an ERUNT replacement -he was the only one of ten people.It is going to have videos, tutorials and prntscns shots to make it ez.I asked around for along time because so many techs swear by ERUNT and I wanted it or a replacement. Unfortunatley the author of ERUNT developed it up to XP but Win 7 users were stuck unless very techy.This is what I was avidly looking for and he said awhile ago he woud do it.So, if you are like me and make errors you would like to erase, add another backup tool to your toolbox.It is freeware and he promises there are no nasties.
View 2 Replies
View Related
Feb 20, 2012
clean up my disabled entries in MSCONFIG BUT there is no entry for it in the registry HKEY_LOCAL_MACHINESOFTWAREMicrosoftShared ToolsMSConfig on my desktop.there is on my laptop.When is MSCONFIG hiding these things?How do i get it back?
View 8 Replies
View Related
Dec 31, 2011
Can anyone recommend a good registry repair program?
View 6 Replies
View Related
Jul 17, 2010
I have deleted Zone Alarm but 2 entries remain in the registry that can not be deleted - this stops my cloning program from working.
View 8 Replies
View Related
Oct 11, 2011
im needing to backup some applications, it would make things a whole lot easier when reinstalling windows. isnt there an application where i can either point it to the main executable of a program, or its shortcut in teh start menu and this program will read into the uninstall and grab all the registry data into a file, so that i can save this info along with the directory of teh application itself?
This way i can cut and paste the app over to the new location (another operating system of the same type) then run this application that will spit the registry entries in for the app. Then i can create a shortcut and when i run it i dont want it to complain about any registry problems, etc.
View 7 Replies
View Related
Nov 5, 2011
I have been using WIN 7 for some time now and , until lately , had no reason to backup the Registry. However due to a problem I had with MS Office , it became advisable to take the precaution of creating a Registry Backup before proceeding with some changes there. It seems the Registry Backup procedure described in these Forums is more involved than it was in XP if I have interpreted the instructions correctly. whether such a Backup can be done by simply going into Regedit and , assuming a full Registry Backup id desired, , right clicking on the "Computer" icon there and selecting "EXPORT" and then choosing a name for the resulting file and a destination to save it ?
View 1 Replies
View Related
Jul 30, 2012
Is it possible to switch on an option to limit or prevent IE from accessing the registry to read information.Or are there applications out there that can interfere with IE's ability to read the registry?
View 4 Replies
View Related
Oct 8, 2009
I'm using a brand new installation of Windows 7 (in a commercial environment) and for some reason the icons in the taskbar dont combine if I have more than one instance of any application open.
I've found the 'TASKBAR BUTTONS' option under 'TASKBAR APPEARANCE' in PROPERTIES to change this, but it appears to be unavailable.
So two questions:
1) Can anyone suggest why this option may be grayed out for me?
2) Does anyone know where in the registry I can turn on the 'Always Combine' option.
View 5 Replies
View Related
Mar 2, 2011
My Wacom Intuos tablet needs a new driver but after removing the old one my Windows 7 Pro 64bit registry still has this old driver mentioned in many lines of all the CurrentControlSet, ControlSet001 and ControlSet002.I am the Administrator and in CurrentControlSet have changed the Administrator permissions to Full and the owner to Administrator for all of the following[CODE]I have read all that I could find about changing inherited and non inherited permissions and ownership but I'm no further forward.
View 2 Replies
View Related
Mar 6, 2011
Is there anything that would cause all registry changes not to have any effect? The changes are saved and still there when the computer is restarted..but the changes never appear. It isn't complicated or anything - just WallpaperOriginX.
View 1 Replies
View Related
Apr 23, 2011
Is it necessary for my OS?I was gonna proceed with deleting it because I had a hunch it was the reason my Explorer.exe keeps crashing every time I move the taskbar.I thought I should check here first just in case I make matters worse/Should I go ahead in delete it? I don't have any K-lites codecs but maybe this is a leftover from the uninstall?
View 9 Replies
View Related
Sep 22, 2011
Windows 7 Pro Administrator plus one User (member of Administrators only)Logged in as User , ran several install shields to install couple of related programs and applications that fomr a Video analytics system on the PC.Typically there will be a registry hive with several sub hives and keys but with the main group titled Citilog.I have installed this software on a 100+ XP's and it always produces this Registry hive in the same place HkeyLocalMachine /software/Citilog 100% of the time this hive/keys key could always be found using reg.edit from the User in which the programs were installed. i recently installed the same program on 7 Win7Pro PC's that had 1 Admin, 2 users member of Administrators only.I ran install shields from User1 on all 7 PC's . The HKeyLocalmachine/software/Citilog registry hive is nowhere in this Users registry or even in the Admin registry or User2 registry but all programs are working . I can do a Search registry using Citilog as search term and I will get several smaller keys form around other parts of the registry but I never see the main Registry "folder" Citilog.
View 1 Replies
View Related
