I'm trying to manage the backups I've made. It seems Windows 7 only labels them by date. I'd like to know what's in each backup, and print out a log of each backup like I could with XP. Just knowing what date the backup was made isn't enough.
View 2 RepliesI've been using various print drivers for various locations with success for a month with my new laptop. Today, all drivers gone.Loading new ones doesn't work. Print spooler is not "started;" it starts successfully, then is not "started" next time I look.Other possibly relevant information: HP 1020, HP MX 340 at home office.Tried: multiple restarts of print spooler, multiple reboots, troubleshooters, HP detect and download drivers?
View 5 Replies View Related(Windows 7 Home Premium 64-bit, HP LaserJet CP1215)When printing from Word (or any other normal application) the documents just sit in the print queue with Status = "Error - Printing".If I stop, then re-start the Print Spooler service, they then print.Strangely enough, this does not happen if I print from the HP printer diagnostic utility.I've done complete re-install of the entire printer driver suite and I'm pretty sure everything that end is OK. So what's happening with the spooler? The error message isn't exactly very revealing
View 9 Replies View RelatedMy HP 6500 all in one will print test pages but will not print from my computer. It worked fine up until a week ago?
View 2 Replies View RelatedI'm on Windows 7 and have run into the annoyance of my PrtScn key actually bringing up the print dialog box to print. It still copies the screen to the clipboard for a paste into paint, but I can't figure out why it's bringing up the dialog to print or how to turn that off. I have seen it before maybe 8 years ago on Windows XP but do not remember what was done to correct it. When I try to search, I just find posts about it not working or how to turn the whole screen capture function off for the PrtScn button.
View 4 Replies View RelatedI created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedAny simple backup program that is capable of backing up large files incrementally by splitting the file and backing up only changed parts of the file? The files I'm talking about are files that get altered by appending stuff at the end of the file, e.g. log files or mailbox files, so it's generally possible to split a new version of the file at the exact point where the old version stopped, purely by file size.
Specifically, I want to back up Thunderbird and SeaMonkey mailboxes without having to create additional subfolders within those programs. I understand that if something had changed near the beginning of the file, then the whole file will have to be backed up, unless the backup program is capable of some very clever searching, but mostly the files will change only by having data appended to it.
Which backup software to backup Pictures/Documents/Videos so that when you do a fresh install you don't loose anything.apart from your programs of course, just the documents backed up what do you use?
View 13 Replies View RelatedI'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies View RelatedHow to Create a System Image Backup in Windows 7 ?
View 0 Replies View RelatedIs there way I can change the location of the backup files location using the Win7 Backup Manager? Right now it just shows me the location for a USB port. I would like to use a Home Group Location.
View 2 Replies View RelatedWhen you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies View RelatedIs there a way to use Windows Backup to backup to a network drive?
View 6 Replies View RelatedI backup 100GB of data with Windows Backup and over the time where I do all my backups there is like only 30GB of data which changed from those 100GB and also new files were added. Now my external drive is full. When I now delete the very early backup, the first one where the 100GB of data was saved, will it delete then ALL those 100 GB, or will it just delete the previous versions of the files which were modified AFTER that time, which are in this case the 30GB I talked about? Because otherwhise I would then have in the end an uncomplete, messed up backup.
View 9 Replies View RelatedI currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies View RelatedI'm using Win 7 Pro and want to schedule several backups to my NAS. With Win XP, I was able to schedule multiple backup jobs, which makes things easier since I have 116 GB of data. I like to backup my documents, email files, etc. every week, but my photos, MP3s, etc. don't change as frequently so once a month is fine for that. Not surprisingly, the media collection takes much longer to backup, which is another reason I try to separate it from my "regular" backup.Unfortunately, Win 7 backup only seems to allow one backup job to be scheduled, which seems awfully limited. Am I missing something? Are there other free backup utilities that would work better, or do I need to shell out some cash?
View 4 Replies View RelatedI'm trying to backup Windows 7 to an external HD that currently is used to backup mac.eed to do to make this happen? I'm sure I'll have to format the ext HD then backup the mac using a different file format, but am unsure just what I'll have to do or how to do it.
View 4 Replies View RelatedCurrently my PC is set just they way I like so I thought I'd do a backup, the idea being that should something go wrong then I can just use that backup (on DVD's) to do restore my PC to the 'now' settings.
View 3 Replies View RelatedDoes anyone know what would cause the following backup error?
The backup was not successful. The error is: Windows Backup encountered a problem while determining additional locations of one of the users included in backup. (0x81000038).
Windows 7 Backup always stops around 58% when it tries to backup "Boot (C" What should I do?
Windows Sicherung bleibt stehen bei 58% bei Systemabbild von "Boot (C" wird erstellt.
I have a Win7 64-bit system and have been successfully using Windows backup on an approximately monthly basis. I ran it before going to bed last night and woke up to a "The backup failed." when I tried to create a system image of both of my hard discs. The error is "Incorrect function. (0x80070001)". I found a workaround solution at Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003 and looked up and found a number of "junction points", most rooted at c:UsersDilipAppData - but the problem is that there is no such folder.
View 9 Replies View Relatedhow do i print to pdf? is there anything similar to the print to PDF addon for firefox. i also can't print when using xps nothing happens when i click save and don't have the option of printing to file. i can't check the box i would rather save to PDF though. no printers installed,XPS writer is set as default printer.
View 2 Replies View Relatedi am having an issue i have two wndows 7 home premium computers in seperate offices and when i remote desktop to the offsite one i am unable to print to the printer on site.
I have enabled the printer sharing and added additional driver support for the printer. It shows up when i am connected as redirected 2 and i can access all of the properties and other menus. However whenever i print to the printer the job never makes it. It does not matter what program i am in i have tried word excel notepad the test page firefox and nothing comes to the printer. The printer is not directly connected to the computer it is a local network install and works fine from all computers in the office just not with Remote Desktop.
I just installed Adobe Professional 7.0 which of course allows me to print pdf files. It requires a certain printer port that is being used by another pdf program that came with HP Elite HPE Series computer. I believe that pdf program is called PDF Complete 'Special Edition'.
This is the error I get when trying to print using Adobe Professiona: Error "Warning 20225" or no PDF Printer appears My question is how do I change the default pdf printer device to use Adobe's?
Suddenly since this afternoon I have not been able to print from any browsers. I am able to print test pages to the printer and print from any other applications (word and excel).
Here are my computer details:
Windows 7 SP1
i5
4 GB memory
Printer: Xerox 6180 DN
[code].....
I have a toshiba laptop and it is running windows 7 with internet explorer 8 and I am not able to print from the internet, I get a error that says script error. I am able to print from all other programs and have called my printer company they say there is no problem on the printer side and all drivers are updated for the printer.
View 10 Replies View RelatedI am new to CMD but I would like to make a batch printing solution.
I know that using:
Code: "C:Program Files (x86)AdobeReader 10.0ReaderAcroRd32.exe" /t "C:file_1.pdf"
I can print file_1.pdf but what I really need is to print multiple files, let's say file_2, file_3... file_n, therefore my instruction will change to:
Code: "C:Program Files (x86)AdobeReader 10.0ReaderAcroRd32.exe" /t "C:XXXX.pdf"
I thought about making a TEXT file where I could write the name of the files that I need to print. Then in a batch file make a loop that will read each line of the TEXT and change my variable XXXX for the name of the file specified in each row of the TEXT.
I had a new Word 2007 doc to print, sent it to the printer. It would not print. When I checked the status it said it was printing, so I canceled the print job, it said deleting, but never deleted the doc, it just stayed with a deleted status. I can not print anything else, but once something else gets in the queue, it won't print but I can cancel it.
View 2 Replies View RelatedThere have been times when I would like to print what I see on the screen. I see a key that has PrtScn & SysRq but not sure how to use it.
View 4 Replies View RelatedI'm running Win 7 Pro with my account (with admin rights) and my wifes' account (without admin rights). When in my account I can go to "file" then "print" and my printer is in the print dialog box. When in my wifes' account, and I go to the print dialog box it just says "xps document" or something to that effect where it should have the printers name. How can I make it so my wife can print?
View 2 Replies View RelatedOn this computer any user I give admin rights to can print just fine. I set the security so that the everyone user has rights to the printer but if they don't have admin their print job just gets stuck in the que. It is an HP deskjet 6127, previously it was getting an error message about "A program running on this computer is trying to display a message." when a non admin would try to print and the print job would get stuck. I disabled the Interactive Services Detection service and it got rid of that message but the print job gets stuck just the same. It doesn't get an error message, it just says printing and never goes anywhere.
I also tried giving everyone read/write access to the print driver folder