Network Problems - Wmiprvse.exe
May 10, 2009
just wondering if anyone having problems here with any adapter, or hardware not installed or installed with a correct (Windows 7) driver, and seen the cpu usage spike up and identify it as the wmiprvse.exe spiking up and down about?
this is causing an abnormal usuage on both the cores even while "idle"... talking in the ranges of 35% and higher, got so bad after a long period today i ended up rebooting. I know in my case its this driver i am trying to use, but using it is affecting the cpu hardcore it seems. I have no other hardware that i didnt automatically install with a 7 driver on this pc, audio included.
View 2 Replies
ADVERTISEMENT
Sep 4, 2011
I've noticed WmiPrvSE.exe eating up a ton of my cpu, i know i need to re-paste my cpu but it shouldn't be idling this hot or using 50%+ idling. It is in the system32 folder and it isn't a virus from what i can see. [code]
View 3 Replies
View Related
Oct 9, 2012
i have instaled windows 7 professional 64 bit.yesterday i installed wifi software for my modem from then my cpu goes high i check process manger and i found a process name WmiPrvSE.exe eating too much cpu i kill the process but it start again i uninstalled driver
View 5 Replies
View Related
Sep 17, 2012
never had this thing consuming so much in the past few years. It came out of nowhere and just recently. restarted computer and that worked for about an hour and it started up again. about 60-70% on 1 core. It also seems to be doing something funky with my temps or my fans cause when it starts up despite only doing that much on 1 core my H80 starts getting so loud i can hear it like no tomorrow.
Also, I've notice my cpu keeps throttling the cpu ratio a lot. This is getting kind of annoying it goes from 1600-4500 randomly more so when this thing is running. I turned of turbo boost as well in my bios so what else could be doing this?
View 16 Replies
View Related
Oct 18, 2012
I had svchost eating into my CPU usage a lot for the past month. I usually got by by killing the process (I shouldn't have had, should I? =X). Recently, this other service wmiprvse has joined svchost in wreaking havoc in my computer.
I've read some other similar forum posts, but the solutions seemed to be vary from case to case. My comp specs follow:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, 64 bit
Processor: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz, Intel64 Family 6 Model 37
[Code].....
View 1 Replies
View Related
Aug 9, 2012
I have a peculiar issue where I would need to have "Network and Sharing Center" open to be able to see that my my laptop's wireless connection. I would see the signal bar and also see the dreaded red x.Even when I have it open, I can see it refreshing each second; like its losing connection and reestablishing.My internet connection is working and has no issues.
Network and Sharing Center - Open
Network and Sharing Center - Open and refreshed
Network and Sharing Center - Closed
View 3 Replies
View Related
Aug 9, 2011
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
View 2 Replies
View Related
Jan 30, 2012
My rig uses a Centrino Advanced-N 6230 wireless mini half-card. It reports the correct name except within the wireless network list. Instead of 6230 it reports 6320. I searched the registry to see if I could find the error, but nothing found. It's only a nuisance, and a minor one at that.
View 1 Replies
View Related
May 14, 2012
Unable to see home network computers in Windows Explorer Network screen.
I have a home network with 2 laptops and 1 desktop. The desktop I use as a "file server" in that all work done on the laptops is stored to the desktop. The desktop computer name is HAL. One laptop is fine and sees the network. The other just stopped seeing it; rebooted the laptop; rebooted HAL; did a number of refreshes without any luck. I opened EXCEL and found a worksheet that was listed that I knew was saved on HAL. Was able to open the file and when I tried the SAVE AS I could navigate through all of HAL just as normal. Went to Windows Explorer and still no HAL listed as a COMPUTER on the NETWORK. I have a internet connection so I know I am making it to the router at least. And when I check NETWORK AND SHARING CENTER it shows an active home network. The laptop is running Windows 7 Home Premium Service Pack 1 Build 7601.
View 4 Replies
View Related
Jan 23, 2013
This sounds really noobie of me but is it possible to improve local network transfer speed by adding a 2nd network card. I was planning to connect one exclusively for lan transfers and another one hooked to a separate wireless router.
Right now only a maximum of 3 users can stream SD videos off the PC before it gets a little choppy.
The pc in question runs on windows 7 and it's board has built in gigabit, I happen to have a spare gigabit card.
View 9 Replies
View Related
Aug 30, 2012
Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening?
- I have tried DHCP as well as Static addresses
- Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it.
- Removed Wifi connection and re-added it.
- Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
View 3 Replies
View Related
Sep 6, 2011
My problem is windows 7 hangs and freeze when access 2003 server Enterprise edition. This is not a small network, one of the biggest network.i have doubt on individual users on domain. before 2 months we had department wise users mean, for example Accounts@domainname.local. But after we created the individual users like john@domainname.local to all users. this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.
View 5 Replies
View Related
Feb 11, 2012
I disabled my network adapter then restarted and now the adapter is no longer showing up in my network connections. How in the world do I get it back? I have looked at other options (like under the registry which was suggested on a couple of places). I have never seen this happen before. I even reinstalled my drivers and still nothing. How do I enable it again?
View 7 Replies
View Related
Jun 7, 2012
how do i keep microsft explorer from trying to surf and find other providers and stay on one instead of showing every provider it can connect too ant2twon@yahoo.com
View 1 Replies
View Related
Nov 2, 2011
Should I turn off network discovery on each Windows 7 pc in a domain network after mapping each pc to server shares
View 2 Replies
View Related
Dec 1, 2011
Today, I managed to redecorate my bedroom; where my computer sat on top of a shaky, wooden desk. That desk is now gone, caput, and replaced by a much bigger, sturdier and prettier glass replacement.Before I dissasembled the computer to re-decorate, I was able to browse the internet at ease. There were no problems at all...However, after the new desk was setup - and all wires replaced in their correct slots, I find that I am unable to connect to the internet, or even the house's network! For the past year, I have been wired to the router using a RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC. It was plugged into an extension cord, in my room, into the Ethernet port in the back of my computer. Downstairs, it's twin was situated no less than 2 feet away from the router - plugged into the first port.Now, when I boot up the computer, the network notification presents the following message: "Unidentified Network. No network access", and sometimes presents a yellow ! next to it. So, I am reduced to typing on my mother's laptop - which has no problems connecting to the network.I am able to use the ipconfig /release command, but unable to use the /renew - it hangs in the command prompt, then tells me that the DHCP server cannot be located. The IP, beforehand, was reverted to 169.254.223.117 - before all of this, I was 192.168.0.5?
View 2 Replies
View Related
Aug 23, 2009
I have a linksys usb600n (v2) using the Windows 7 driver from linksys. It installs and is displayed correctly in Device Manger - BUT it doesn't appear in the Network and Sharing Center as an adapter. This same device and driver were previously working just fine in this system - but I rebuilt the OS (clean install) after testing a number of security products out.
The initial install went fine - no problems that I remember - just plug in the adapter and install the drivers obtained from Linksys (Ver 3.00.01.0). I tried the same thing on the re-build and it looks fine until I go into the Network Center and can't set up wireless networking since the adapter does not appear.
SIW shows TWO (2) linksys USB adapters under Hardware/Network Adapters, but does not show the network adapters in the Network Information section.
Any ideas?
View 3 Replies
View Related
Nov 1, 2009
Installed Windows 7 on two home-network computers. Everything appeared to be good, including networking, but I could not access printers (linked through each computer) with the opposite computer. Windows update offered an update for the Broadcom 802.11n network adapter, but when I installed the update I completely lost the network.
I had to revert to the old driver in order to reastablish the network. But the printers still are not recognized. The network adapter on the secondary computer is a Linksys WMP300N. I did try turning the router off for ten seconds with the updated driver but that had no effect.
Anyone had this problem?
View 0 Replies
View Related
Jan 14, 2010
How to Set the Windows 7 Network Location Type ?
View 0 Replies
View Related
Nov 17, 2010
I want to add additional icons to the 'system32pnidui.dll' file. That's where you pick which icon you want to represent the active named network in the Network And Sharing Center. I did a search in this forum on 'network icons' but didn't find anything. Aside from all the permissions restrictions what app can be used and what kind(s) of files will work in W7? I have lots of .png images that I would like to use if they will work. Lenovo T500 W7 Pro-64 Current Updates.
View 1 Replies
View Related
Jan 20, 2011
New windows 7 Home Premium desktop that can print when the printer is directly connected but can't print when the printer is connected to an XP pro pc. It can see it but we're getting a "driver cannot be found on the network" flag.
View 9 Replies
View Related
May 12, 2011
Recently when I try and connect to the internet my wireless connection network says it is an unidentified network with no internet access. This never happened before.
View 2 Replies
View Related
Oct 22, 2009
Okay so I've installed windows and everything is working okay except i can't connect my laptop to my computer via LAN because it won't let me change it to a HOME NETWORK. It is just gets set to an unidentified Network. any possible suggestions?
Also I've look at removing this from the services but its not running it when i go under task manager, unless it somewhere else.
"##Id_String2.6844F930_1628_4223_B5CC_5BB94B87 9762 ##"
View 1 Replies
View Related
Nov 2, 2009
How to change network type to private network in networking and sharing centre with out showing UI to the user and it need to be done pro-grammatically.
View 2 Replies
View Related
Oct 26, 2011
(the bytes sent and received). It seems skype calls and watching in browser videos shoot them up into the billions after a few hours +. Upon googling around i am quite alarmed. Why did my network randomly change to "network 3"? A few weeks ago it just said 'network'?
View 7 Replies
View Related
Jul 18, 2012
I have 2 different laptops. both running Windows7 and connecting to the internet wirelessly. within a few days of each other they both began to display "Currently connected to: Unidentified network No network access" and they will not let me get on the internet. It is not my router becuase It shows the same thing no matter where I try to connect. I have tried my gym and a local restaurant that I have always had success connecting to before. Furthermore my WindowsXP desktop is directly connected and is connecting to the internet without any problems. My laptops are both running AVG for antivirus.
View 4 Replies
View Related
Apr 8, 2011
my laptop doesn't connect to my wireless network, neither by cable (wired).
View 9 Replies
View Related
Dec 31, 2011
Yesterday it worked and when I booted today it didn't I have absolutely no idea what the problem is and I have checked everything I know with no use.
- I am using d-Lan (PowerLan) and have had no problems with it until today.
- My router, modem and the d-lan devices are functioning properly which I have tested multiple times so I'm sure the problem lies with my computer.
- I have tried Troubleshooting with no effect
- It isn't an IP conflict
- It isn't a 3rd party program (I started it in safe mode, same problem)
- Internet still works over my W-Lan but is incredibly slow and unstable
View 6 Replies
View Related
Dec 26, 2009
For boxing day, I bought myself a new Computer case, a Cooler Master HAF 932. After setting it up and booting my computer, without any problems, my Internet would not work.
I attached the Network & Sharing Centre screen to show you what it says. I've tried many things, switching cables, direct input from modem (I use a router), and all sorts of guides that have similar problems.
View 9 Replies
View Related
Apr 19, 2011
Windows did not show any network connections in the network connections window. I tried everything that I could find online but nothing worked. As a last resort I decided to reinstall the driver for my Intel 82566DC-2 Gigabit network connection. I uninstalled the old driver and then installed the latest drivers but now I get code 31 (cannot find the driver software) in device manager and the connection doesn't work.
View 5 Replies
View Related
Oct 8, 2012
5 month old Dell XPS 8500 Win 7 64 bit Pro as main computer connected by Wired Adapter, Upgraded Gateway 5632E also running Win 7 64 bit pro as second connected by Wireless. Both running Kapersky successfully. no network problems for 5 mo.
Both were successfully linked using homegroup. Had to take Gateway to a remote location to do a business demo. While there had to link to a local public WiFi. While connecting made mistake and left homegroup.
When Gateway returned to homebase a few days later it was fine, had no problems finding wireless but could not see or rejoin Dell machine homegroup. It would let me set up a new homegroup.
Went to Dell box and found 1) homegroup no longer existed, 2) router and network and wireless printing no longer found - Red X on the taskbar) even though internet was still working fine.
Took nearly a week of trying differernt fixes, on adapter- off adapter- different adapter reboot network, router, even updated router firmware (Yes I went through every ipconfig reset, renew, redecorate etc. I've used netsh functions to try to get evrything to reset. Changes services.msc settings per other posts. Finally in desperation, deleted every sub key in the registry related to network locational awareness and got the Dell to find the network, let me set it up as a "home" network and then even see the invitation to join the Gateway's homegroup.
Then I hit a wall- when I try to join- Win 7 says I can't join the homegroup because the network is not a "home network". Of course troubleshooting is useless and goes into an endless loop. Have searched in desperation for any way to make Win 7 return to a clean slate so it can sense that it really is on a home network without success. Applied the fix-it and hotpatch for when Win 7 gets stuck in public mode. No joy. Deleted the hide wizard subkey as suggested elsewhere. No Joy. Gut feeling says problem must lie in the NLA or peer networking somewhere but where?
Does anyone know of a method or set of steps (short of a clean reinstall of Win 7) to completely clear every thing the OS knows about my network and force it to acknowlege my network is a home network? Is there a registry hack that will clear the problem?
I know I could abandon the homegroup and do conventional file/print share but I am concerned that using that solution won't last as whatever is screwing up the homegroup could eventually screw regular sharing and then I'm back to reformating/reinstalling. I'm just about ready to join the Apple folks so I never have to work on Windows again.
View 2 Replies
View Related
