My Toshiba satellite L505 laptop running windows 7 won't play some CD's. Some CDs/DVDs work on it, but some do not. The CD in question runs on other laptops and computers running wndows 7 with no problem.
i just format my laptop to windows 7.. but after that, my laptop cannot read any cd's or dvd's.. is there anything that i need to download first before playing dvd or cd?
I am using hp pavilion g6 notebook pc, I was trying the check the pictures that i saved in a dvd disc but my laptop don't see any pictures it just keep on asking me how to format the dvd and it's the same woth the other dvd's i have.
Both machines are Windows 7 64 bit. I have set all network settings exactly the same. I have turned off Zone Alarm on the laptop. I have set set sharing on drives and folders to Everyone. While the desktop can see the laptop over the home network, when I try to access files, I get the "enter username password" dialog box, which seems to have no function (at least to me).
my Acer Aspire One which has Windows 7 Starter, will not read my USB flash drive. I have even bought a new flash drive to see if it would recognize the new one. It hasn't. How can I get my computer to recognize the flash drive?
Toshiba laptops which have problem CD/DVD drives seems to be fairly common. Mine can read a CD but not a DVD. I take the same DVD and it runs fine on my IBM running XP. I'm not convinced this is a hardware problem.
Just built my new computer but realized that I can't use the same Windows 7 disc/cd-key that's on my old computer because it's only one per computer when I thought it was 3.Looking at the prices on the Windows 7, it costs $119 for upgrade and $200 for full retail. From what I have read, when installing using the upgrade disc, it would detect my previous Windows version and if it's older than XP, or if there's no Windows installed, it would not activate Windows as it isn't a proper license and I would need the full retail one.
I purchased a Toshiba Lap Top from a lady. She said that she had the system completely restored....she sure did. I have no internal sound and my pen drives will not work in any of the USB ports. What do I have to do to get them to work? I have all of my work on these pen drives.
From what I can see, this seems to be a fairly common problem across computers...My Dell Inspiron n5010 (Windows 7 Home Premium 64bit) sporadically won't read DVDs. A couple of nights ago, it took a couple of tries - last night, I couldn't get it play one at all.Having looked for various fixes, I have tried the following:-Updating drivers-Disabling and re-enabling the drive in device manager-Going into the registry to remove recommended entries (high/low filters i think? I only had the "high" option, which apparently means that fix isn't for me...)-Uninstalling any DVD-burning software that may be interfering with my laptop's own DVD player/software.
Is there a way to easily downgrade to Windows 7 32 bit without having the 32-bit disc? Maybe a program to do all the bitchwork while I basically sit back?
My laptop does not read my new external hard disk drive using USB connection. The sign "Safely remove hardware and eject media" is there. But the icon of the hard drive doesn't appear in the "Computer".
What's the best type of DVD to use for read-only and read/write applications? I'm a little out-of-date on this, haven't bought any in awhile. I remember things like DVD-R/RW and DVD+RW and such. I have a new machine running Win7, and an older laptop running XP.
I try to start my Dell Inspiron 5010 laptop and I get "A disk read error occurred. Press Ctrl Alt Del to recover"Every page I've Googled about this error tells me my hard drive is shot and needs to be replaced. I'm in total denial so, can this really be? Have I lost all my data? Does the hard drive need to be gutted and replaced?
I have a new Toshiba Laptop (Windows 7 64bit CORE i3). I would like to run (via usb) and old hdd from my desktop which was 32bit Windows 7. I have the old hard drive in a SATA enclosure and running it via USB to my laptop. When I attempt to either copy or read the old hard drive I get a write protect error. I have tried the MS registry changes to remove "write protection" but the registry entry they call for is non existent in my laptop registry. My last post on this was annotated as solved...but my explanation was weak. I do not want to run this drive as a permanent addition to my system, I just need to copy some files from the old drive to the new one. If I attempt to use Control Panel/Disk Management it tells me the old drive is not "initialized". Both options to initialize don't work. I have some very important medical records that must be copied from old hdd to new.
TLDR: I get the "A disk read error occurred" error but the system disk is readable and checks OK in the recovery USB. So, I have two hard drives--a terabyte drive with some data on it and a smaller drive with the Windows 7 installation on it--and a USB drive. I made the USB drive into a recovery USB using the instructions here Installing Windows 7 System Recovery into USB Flash Drive | Raymond.CC Blog with the addendum found in the comments. I made a system image of the smaller drive via the control panel and then put the image in the terabyte drive. I then replaced my smaller hard drive with a new drive of a comparable size.In order to restore the drive, I booted into the recovery USB, formatted the new hard drive with ntfs, made it active, and ran wbadmin start recovery -version:xxx -items:C: -itemtype:Volume -backupTarget:C: -recoveryTarget: where C was the terabyte drive and D is the new drive. I may have the drives mixed up here, but I assure you I had them correct when I actually ran the command
After a reset, I got some generic error so I went back into the bios, and set the new drive to be at the top of all boot lists, and then rebooted. It was at this time I got the above error. I feared that my drive was actually DOA, so I booted back into the recovery. I did a D:;dir and saw that all of my old files did indeed exist, so I figure it was a boot issue. I ran the boot repair utility in the recovery menu and it said there were no errors and I should restart. I didn't restart, and instead ran a chkdsk D: /f and found no errors. I did a bootsect /nt60 /all /mbr and restarted and still nothing changed. I even tried a "bcdedit /timeout 10" and I do not see the boot loader before getting this error. Not sure if that is expected or not but I'll throw that in here.
We are running a small network with a NAS and networked PC's. The PC's are all running Windows 7 Ultimate. One PC will open files already open by others and does not notify that the file is in use. This user enters information into the file, saves and closes.When the original user (accessing the file first, sometimes adds information) saves and closes the file, the changes from the second user are lost.
i had a friend install windows 7 for me, now my cd rom won't be read by my computer. how do i fix this? i tryed updating, and going on the manufactorers site with no help at all. i have a compaq presario. and how can i speed it up again.
I put in WD MYBOOKLIVE which is a network drive and I got a Blue screen. I also get it if I put in a Logitech webcam which I really need.WD tech support said the drive has nothing to do with the Blue screen. I triedt o read the DMP file by putting it into WORD but that didn't work.