had a blue screen with some error that quickly displayed before restarting didnt get to write all down C000006? now it only keep bringing up the recovery manger, i tried system restore and get error (0x800700b7) and computer checkup neither of those helped. Run in, memory ,hard disk tests passed
View 2 Repliesevery time i turn on my laptop it goes to the Starting Windows screen and then the windows logo never shows up and goes into a start up repair. the start up repair is unable to fix anything. i don't have any restore points and i get an error message every time i try to back up my files. i think it's just missing a file to start up but i'm not sure.
this is what the start up repair says:
Problem Event Name: StartupRepairOffline
Problem Signature 01:6.1.7600.16385
Problem Signature 02:6.1.7600.16835
Problem Signature 03:unknown
Problem Signature 04:21200290
Problem Signature 05:AutoFailerover
Problem Signature 06:17
Problem Signature 07: CorruptRegistry
OS Version:6.1.7600.2.0.0.256.1
Locale ID:1033
i have a HP Pavilion a6305 with a nettle motherboard and phoenix bios. For a while now i'd been having trouble booting, sometimes white lines or dots would flicker once at the HP Invent screen and just freeze there. But for the past 3 days now I haven't been able to boot at all, whenever I turn it on it just goes beeep-beeeeeeeep and doesn't show anything on the screen, when looking up the beep codes I couldn't find what this one meant. I've tried unplugging all leads and just use the power cord but this made no difference. I've also had a brief look inside, the fans are working fine and it's not clogged with dust.
View 3 Replies View RelatedSo ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
View 4 Replies View RelatedMonday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
View 4 Replies View RelatedI'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD
cmdGuard
cmdHlp
CSC
DfsC
discache
ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
When i got home today didn't my computer work, my girlfriend has been the last one using it. So don't know how things were just before the shutdown or anything.when i turn on the computer i get to the screen where "touch bios" is and where i can see the options like Bios settings, boot menu, xpress recovery.but i cant press anything, and after about two seconds on that screen the PC shuts down again.The keyword lights up so there is a responds on it, but just doesn't work to press anything before it shuts down.I've got BSOD upto several times a day for a few months time.believe that my computer is affected by some virus or something is delaying my computer. might be an combination of several things.I got no external things hugged up to the stationeer computer right now.it is a windows 7 x64 machine.
usually when i get issues i can access advanced boot up or bios, but can neither in this case..I wonder if it might be a hardware issue.
When I start up my computer, my Steam starts up, then I manually start Chrome. Chrome comes up fine, Steam does too, but when I try to right click on Steam and click friends, all it does is create another steam process running at 100-108 K. Then if I close Chrome and try to reopen it, it will do the same. This happens with EVERY program after I start up. There's a 5 second window where I can open programs without issue, then after that it will only start 108 K copies of them. It takes me around 30 restarts just to get it working properly, if not more.
View 14 Replies View RelatedI have a video card that used to boot up in windows 7 - but know this computer with a GeForce 9500GT video card boots up with the Vista boot up logo.I found out this was the video card because I have another card with another GeForce video.I took the swapped the video cards, and the indication changed. The original computer booted with the windows start up screen. And the test computer booted up with the vista boot up screen.
I was told by a local computer repair facility this had something to do with video drivers.I tried what the organization suggested and uninstalled all video drivers (I used generic Windows 7 Video Drivers).Then the organization recommended downloading the latest video drivers for the GeForce 9500GT.This video card has 512GBytes of memory. I did this.Then I was told to install the newly downloaded video drivers.I resrted the computer with the Vista login screen with windows 7 operating system,and the vista login screen was displayed.
Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
View 3 Replies View Related1. Which DLL uses W7/64 for the sound at start-up of Windows? I would like to edit it for my own sound.
2. How can I alter the sequence of the entries in the Start-menu? Now the sequence is in sequence of creation, I would like to group them by application-area.
F keys will not work either! I don't think I have a disc to restore from, what else can I do?
View 4 Replies View RelatedI have an error that system32/hall.DLL is missing so I put in my windows 7 DVD ( I Have 4 DVDs for my windows, gateway, I always put the first one) so I could start start-up repair but when the windows files is loaded it keeps starting recovery mangment which gives me options to recover my hard drive to factory defaults (ie delete files on c and reinstall windows) ,why I don't get options to choose startup repair, how can I get it to start start-up repair?
View 3 Replies View RelatedMy laptop freezes when i turn it on after a minute or two just enough time to maybe sign in but i can go into safe mode and it wont freeze but you cant do anything in safe mode that
View 1 Replies View RelatedMy dell n5030 laptop isnt getting past the windows start up screen. It boots up fine up to the part where the four balls become the windows logo, but then freezes there everytime. When i try to select the windows start up repair it blacks out the screen and I cant do anything.
I know its not a faulty hard drive because its newly fitted and this problem occured previously on a different hard drive aswell.
using windows 7, have a blue screen at start up issue, memory dump. Sadly the PC wont start so unable to try too much, it lets you select user, attempts to ,log onto the user then just goes to mthe blue screen and starts the cycle again. It will not start in safe mode either, basically the same result although sometimes it loads and you are in but when you try to do anything it goes to the blue screen again. I did get the error code (not always the same on the blue screen but this one comes up most time), "driver IRQL not less or equal"
View 2 Replies View RelatedThe problem that i am facing is that, my windows 7 search is instantaneous but when i click on the application the application takes time to load but if i run the same application from Desktop it will load immediately. This happens only one first time after bootup.
View 9 Replies View RelatedI have Windows Ultimate (x64).I use the Asus Suite II supplied with my Asus Asus P8Z68-V Pro Gen3 Motherboard (which I like for fan and temperature monitoring) Ai Suite II always loads BUT "on screen" it is messy during loading because a seemingly AI Suite bar sized white artefact appears top left of screen for 10- 20 seconds before disappearing when the AI suite icon appears in the notification tray. Sometimes a white square also appears temporarily.I have noted that if I exit Ai Suite II and reload via the Asus AI suite supplied Shortcut I never get these artefacts AND the suite loads instantaneously (I note however Asus uses AI Suite II.exe via the shortcut but via the Asus installed Task Schedule it open via "AsRoutineController.exe -open"I have also tried unloading AI Suite II and AsRoutineController.exe and loading AsRoutineController.exe and it too loads cleanly and almost instantaneously.
1) Why does Asus use the Task scheduler instead of loading via the normal Windows Startup procedures?
2) Could it be so each can be easily disabled if required) and is that the ONLY reason?
3) what is the -open switch in the command line?
4) Is there ANY good reason why I should not disable the AI Suite II in the Task Scheduler and add it the the Normal Windows Startup applications I use the Free version of Startup Delayer as it has served me wonderfully with my current Win 7 O/S (and my previous XP) in ensuring all desired Notification Tray Icons display EVERY time).
Today I PROVISIONALLY made the change and AI Suite II opens cleanly (as other Startup apps) without temporary white artefacts and with no noted side effects so far. I am nervous however, to make it permanent without advice from knowledgeable Seven Forums members on this subject
I did a clean install on my new HP pavillion model a6632f, everything works other than I can't get the 15 in 1 reader to show up. There are no unknown devices in device manager.
Any ideas?
I'm running just a standard Hp pavilion dv4 laptop, windows 7 64 bit and i5 core.Two days ago my computer started running at 100% or spiking between random % and 100% on idle, or when I run just one program ( it does it with word, firefox and other small programs).I opened up the task manager and checked to see if there were any background services running that were causing this, to my knowledge there aren't any. The spikes are happening when any program is ran, thus making my laptop extremely slow. It also has a few moments when it has shutdown to avoid overheating.
A list of things I've done so far to try and find/correct this problem are:Disabled all startup programs and services, gone to safe mode, used malwarebytes,spybot and AVG to detect if there was a trojan or virus causing this severe problem. A few anomalies I've discovered that lead me to believe it might be a virus were: Windows defender will not open and is currently off, same with windows security center. When I search google on firefox for specifics such as "cpu 100% or overheating and such" I'm redirected to msdb or some microsoft support website, without it bringing up the google results. It's also done this in general when i try to search any other random sites on google.It's either a very clever trojan or worm or a hardware failure.I contacted HP told them what was up. They just opted for me to send it in and have them replace the CPU and motherboard for 320$ which is kind of ridiculous without them even taking a look at it. When this problem initially occurred and I checked what processes were running at the time, there was one SVChost.exe file that was tagged as "bit-coin miner". I stopped it, but yet, I know that some people are out there hijacking other GPU with bots to mine for bitcoins. That made me thing that it could be a virus and not a hardware problem.
hp pavilion g6 for window 7
View 2 Replies View Relatedmy web cam is not opening?
View 2 Replies View Relatedgetting hp pavilion drivers?
View 2 Replies View Relatediam just using my laptop the power just went off itried to power it it refuse what is the solution.
View 2 Replies View Relatedi need all drivers for hp pavilion g6 notebook
View 2 Replies View Relatedmy driver cd are lost?
View 1 Replies View RelatedI have an Acer Aspire M5811 running Windows 7 - 64 bit. When I tried to start my pc tonight I ended up with just the desktop wallpaper with no icons or start menu.
I tried to reboot in safe mode but the pc became unresponsive. I also tried using the system restore disc but again nothing.
I have a Pavilion SL3850 that freezes up multiple times per day. When it freezes up, the system is not reachable though the network, and the keyboard does not react on events - the numlock led does not change. The screen remains frozen, with all text and images displayed as it was. There is no mouse response anymore. The system is running Windows 7 64x. The fans are working, and I checked the system and memory with the HP diagnostics tools. I also replaced the root hard disk and restored the system through WHS. I also tried restoring the system to a month before the problems started, but it froze just as frequent. There is no indication in the system log about the freeze, apart from a report that it has stopped unexpectantly. This stop time is at the time of the freeze, not at the time when I switch off the system to reboot it.
View 1 Replies View RelatedMy new notebook has a number of partitions with windows 7 on one. I would like to do a complete format and then install windows 7 on about a 20 gig partition.
View 4 Replies View RelatedWe just bought a Hp Pavilion p6-2133w, we hooked it up to a sony monitor, we had to hook them up with a adapter that takes the dvi-d from the computer and adapts it to vga for the monitor. The problem is the monitor doesn't act like it is reading the signal.
View 5 Replies View Related