Good Slpitter For Splitting A HDMI Signal Form A WMC Computer To 2 Tv's?
Sep 29, 2011
Does any know a good slpitter for splitting a HDMI signal form a WMC computer to 2 tv's? I bought one from monoprice but I can only get one signal to work. I know you use a extener but I do not want spend $200 to $300 for one just to watch 1 or 2 hrs of programs.
I have connected my hdmi cable as usual but this time i had on tv display NO SIGNAL. When i connect another pc to check the cable it seems to work correctly.The problem is coming from my pc.
When I connect my PC to my TV Via HDMI Cable, my TV does not receive a signal. When I check in Control panel>Display>Resolution, My TV hasn't even been detected. My TV is an LG 50", Card is a GTX580, and my OS is Windows 7.
Also, when I connect my laptop to my TV via HDMI (Also on Windows 7), It is instantly recognised and automatically displays, so it has to be an issue with the PC itself.
My All in one PC Asus ET2400XVT has a HDMI-input port but whenever i try to connect it through a HDMI-HDMI cable to my ps3, it does not sense the signal. What can i do?
Sony notebook with HD AMD6630 M. HDMI port not giving signal to TV. When I rollback the Intel Gaphics driver the HDMI signal comes alive but then goes dead after reboot. I have been trying to solve this for 2 weeks without success.
I added speakers to my computer and now I have this message on my monitor "HDMI NO SIGNAL" Everything seems to be working etc. I can get on the Interenet, play viedeos, email and all software is useable. How do I get that message off of my monitor?
I have done some searching but to no avail. I have tried everything I can find/think of with absolutely no luck.
I have a brand new Samsung LN46B750 which I have connected to my desktop for use as an HTPC. VGA works fine, but I would much prefer to use a digital connection. SO, I have an HDMI <> DVI adapter and a monoprice HDMI cable connecting my GeForce 6800 to the HDMI/DVI port on the HDTV.
I have tried 182.5 and the latest Nvidia drivers as well as the generic Windows 7 drivers. It's all the same.
Everything works fine in the OS so long as I make it past the Windows splash screen. And unfortunately, that never happens. I believe that the problem lies in the auto adjustment of the screen when 7 starts loading. (If I boot without the TV connected, and then connect after the splash screen has loaded, everything is perfect.)
Is there any way to disable the auto detection/adjustment of the TV and just have the OS always boot into 1920x1080 @ 60 Hz. I am really tired of the blank or black screen every time I reboot. This is a terrible bug with Windows 7 or EDID and it needs to be fixed now Microsoft!
I am pretty decent with computers but not an expert. I am having a little trouble with my home theater PC display flickering. My video card is a Radeon HD 6900 and the drivers are up to date. I have the HDMI out of my PC going to an Onkyo 7.1ch HT-R590 receiver and it's output going to my LG 42" TV. My OS is Windows 7 Ultimate X64.The system used to work perfectly fine but over time the display started to flicker at random times. I tried to hook my PC directly to my TV and it works perfectly fine, so I am 100% certain the problem is in the receiver. I did a bit of research and it appears to be a problem with my receiver over heating.
Now, if I run my HDMI to my TV, I cannot use 7.1ch surround sound. (Even after playing with Audio Return Channel) If I run optical to the receiver, my video card only puts out 5.1ch surround sound for some weird reason. So I did the next obvious choice, I ran a DVI to HDMI to my TV for video and HDMI to my receiver for audio. I thought it would trick it into thinking there was two displays but this does not work, I do not get audio. was wondering if you guys knew of any utilities that would allow me to output audio on one HDMI stream and video on my DVI port. I did a lot of looking around and it looks like DMCA calls for HDMI to be encrypted and you can't separate the stream. Or would I just be better off getting a separate audio card to connect to my a/v receiver
The problem I am having is I have connected my pc to my samsung tv The image and sound are showing up on the tv, however, I am getting an error message on the tv saying NO SIGNAL.
The problem I am having is I have connected my pc to my samsung tv... The image and sound are showing up on the tv, however, I am getting an error message on the tv saying NO SIGNAL.
ive got a problem with my new viewsonic vx2753mh-led monitor. its got 2x hdmi inputs and one vga.the vga works straight off the bat, but whenever I try and plug the hdmi in it just says no input signal detected and goes black I noticed in device manager that this was installed as 'generic non-pnp monitor' so after jumping through some hoops i managed to install the driver as 'viewsonic vx2753 SERIES' anyway this doesnt seem to have made a difference. still no input through the hdmi.I have tested to cord on my samsung tv and it worked fine so it can't be a problem with the cord or the graphics card....just some general info that might be of use:
windows 7 x64 dual monitor setup
the graphics is integrated on the intel i5 chip my display adapters in device manager says Intel(R) HD Graphics Family.it has a dvi out, hdmi out, and vga out.
I am having an issue of HDMI working during PC boot, but TV loses signal just before Windows 7 log in screen comes up (TV shows "No Signal" at this point). If I use VGA to connect PC to TV, everything works fine. [code] One thing I noticed is that Windows 7 device manager sees my TV as a "Generic PNP Monitor". I have no idea if this is connected to my issue or not. The Intel website says my drivers are up to date when I run their update utility. The Intel Graphics utility on my PC sees my TV as a monitor, not as a TV, but it does list the correct model # (M260MV).I've tried connecting both the TV with HDMI and a PC Monitor with the VGA cable and the computer would only detect the PC monitor with the VGA cable.I have read on an Intel site that others with the Core i3 CPU had similar problems so this may be a CPU/CPU driver issue, but as I said, the Intel Update Utility says my drivers are up to date.
I just bought a Netgear WNA3100 wireless usb adapter for my HP Win 7 64 bit laptop. I have been trying for 2 and half days to figure out why my speed is slow, why i don't have a good signal, and/ or if I do have a bit of a signal to my luck, why my signal comes and goes. I don't have internet at home at the moment because I am trying to save up to go to school. I am picking up a public business signal from a block away (which I have asked for permission to use), but I only am receiving not much of a signal with the Netgear usb wireless adapter.
Sometimes when I turn on my computer although computer starts but the monitor doesn't show anything. I unplug the power cable from back of computer and then replug it and after that monitor starts responding (it starts showing desktop), how can this problem be fixed.
Anytime I play wow after a few minutes to a couple hours my computer will freeze up, sound will loop and the screen will say signal out of range, set to 1680 X 1050 at 60hz. Normally this wouldn't be an issue but my Nivida Geforce 555 already has these settings.I'm using windows 7 and I can't change my monitor(display) settings to 60, it reverts back to 59 because of some rounding thing windows 7 dose. Because of this wow also locks to 59 hz even though the nvida settings are 60hz, due to the monitor. Is there any way to lock ether wow or the monitor settings to 60hz to stop it from crashing?
my laptop will not load up. I can get it to the screen where it says repair computer, safe mode and all that. (advance boot options) but anytime I click any off them it goes to a screen where it says I need to put in the windows installer disk. I do not have any disk but I downloaded the repair disc from my other laptop. I put the disk in the computer and restart it and it just goes back to same screen. It does not automatic rebot, or ask me to rebot from disk.
When I switch on the computer, on the monitor, I just see the start window and green dots running, then the monitor screen went black and say 'no signal', I can't even switch off the computer unless holding the switch button for a while.
if i play a video file with vlc media player or a video on Internet, out of the ordinary happens more often and often. it looks like everything freezes. my monitor doesn't receive any signal from the pc, so it turns pitch black. the audio freezes.the sound that comes out of the speakers are a repeating sound in a jam.
i have a 2tb hdd..installed windows 7 now i want to split my hdd into 3 mayb 150gb for system (C1000 for work rest for random stuff...(gaming, etc etc)but when i go into mang. i can only split it to 900gb....so now i have a 1000 sys n 900 on another...C...D drive.....i dont need a 1000 sys.....so what can i do?
I have a laptop running Windows 7. Is there a way to split my existing hard drive and install Windows 7 on the other side for testing different AV's? I want to split it without interrupting anything.