Enable Disk Controller In Bios Windows 7?
Dec 7, 2012enable disk controller in bios windows 7?
View 1 Replies
ADVERTISEMENT
Windows 7 Cannot Be Installed To SSD - Enable Disk Controller In BIOS
Jan 10, 2013I have Dell Inspiron N5110 i7 and with 8Gb RAM and I have replace DVD drive with SSD disk in caddy, and that this is working fine ( when formatting I can copy files), also I have selected AHCI for SATA controller in BIOS. After that my plan is to put Windows 7 on SSD disk. So I have make one USB flash with Windows 7 installation from iso file.
Then during installation when I got to point to select SSD disk as disk where OS will be installed I receive message: "Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu." What I need to do, I have formatted SSD disn with HTFS, I have leave it blank, I have tried all possibilities.
Unable To Install To Disk, Turn On Disk Controller In BIOS?
Aug 14, 2012trying to install Windows 7 on sony laptop with a copy that is different from the original copy of Windows 7.did partdisk, clean all, create partition, and dvd install gave the "can't install to disk, turn on disk controller in BIOS" error. there is no disk controller function in my BIOS.if partdisk clean all was successful, does that mean the HDD and its controller board are ok, that is, not physically damaged, and the problem is with software/installation/setup etc.?what should i do next, in order to have a successful install?
View 9 Replies View Related"Enable Host Controller In BIOS Settings"
Jun 22, 2012I need some information regarding the convertion of SATA to AHCI.I have built a new PC with i5 2500K,Asus P8Z77 M Pro Motherboard and 8GB Transcend RAM.I tried to install Windows 7 ultimate after formatting my old hard disk(Segate Bracuda 500 GB).I got an error as "Enable Host Controller in BIOS settings"Then i surfed and found that this is the issue with SATA to AHCI Conversion.I also found a Microsoft KB Error message when you start a Windows 7 or Windows Vista-based computer after you change the SATA mode of the boot drive: "STOP 0x0000007B INACCESSABLE_BOOT_DEVICE". The KB has a Auto fix setup file that can be installed on a pre installed hard disk. But i have formatted my disk and i couldn't install a new copy of windows 7.There is an auto run files for the same Auto Fix but when i tried to boot the auto fix from a USB stick,i got an error "Please insert Floppy Disk for copying files".I dont have a floppy drive attached to my new computer.let me connect it to my old computer(intel dual core with mercury motherboard) and install window7 in it with the Auto fix installed on it and if i connect it to my new computer and boot it will it be working?Is SATA will be converted to AHCI after doing this?
View 9 Replies View RelatedHow To Enable Usb Keyboard In Bios
Apr 3, 2012mu usb keybord not working in bios and cm-dos
View 3 Replies View RelatedNo Display After BIOS / Windows Or USB Controller Update
Oct 28, 2012I recently bought a computer and it had an OS issue, so after some tinkering I was able to install XP onto it, then install 7. Everything went relatively smoothly. I had downloaded the drivers and updates from HP's website for my model computer. I went through and started installing them one by one. I came across the BIOS one and it said it couldn't install it. There was also a Windows update that wanted to install, but at the same time I had already moved to the next driver, a USB controller, and that one had completed it's installation and wanted to restart. I had stopped the Windows update and then prompted it to restart the computer.
It shut down and when it came back up, it brought up a black screen with some text, that then flashed blue for a split second, then turned off. I went to turn it back on, but there is no display now. I currently have a DVI-HDMI that is plugged into my laptop, but it says it can't recognize anything (though it had been doing fine before all of that). I do not have a Windows 7 disc. I had downloaded it from the internet and mounted it using Daemon Tools lite and all went smoothly, so I don't think that was the issue. I have a feeling that something went wrong. I've tried hitting F8, 9, 10, and 12 hoping that it would enter some mode and the display would reappear, but nothing. Do I need to burn Windows 7 to a disc and try it that way?
How To Enable Wireless / BIOS Check Says Hardware Is Fine
Oct 16, 2011I have a 1 yr old dell vostro 3400 and for most of that year the wireless worked perfectly. Recently I have no wireless: I cannot set up or connect to anything, and nothing is visible. When I go to control panel etwork and internetmanage wireless networks, is says "Wireless is not currently enabled." I know about the little toggle on the laptop's exterior, and that is in the correct setting. I ran a hardware check from the BIOS and all relevant hardware is properly working. When I go to registry editor though, some of the files in SystemCurrentControlSetservicesWlansvsParameters have no values set to them (I didn't set them like that). how I can reenable wireless or is there a list of default working values for those files?
View 5 Replies View RelatedWindows Enable To Start After I Messed Up With Disk Management
Jul 7, 2012I had Windows 7 Prof. 32 Bit version installed on C. I had two more volumes D and E.So i needed one more volume therefore i shrinked the D and took 16 GB from it and made it new volume as NTFS formatted drive M. When doing it windows showed some warning that "you wont be able to boot except from your current installation" I cant remember exactly.After that the colour changed from blue to geenish yellow.When i restarted the windows logo started and the system crashes and BSOD with STOP Error : 0x0000007b (0x80786B58, 0xC000034, 0X0000000, 0X0000000)I ran diskpart Here are the results:My all 4 partition had become dynamic and i think this is the reason that windows wont boot.
View 1 Replies View RelatedFlashing Bios On An Adaptec 1220 SATA Drive Controller
May 26, 2009I'm going to install RC1 in the next few days.
I was looking to test the stability within RC1 of an adaptec 1220SA card I have to control the system drives. I have the Vista 64bit driver for the card as this is the newest listed.
I have created a recovery disc in beta build 7000 and hope to use this to boot into a DOS shell and follow the instructions given on the adaptec site:
This is the BIOS release v6.0-0 Build 2330 for the Adaptec SATA II RAID 1220SA Controller.
This BIOS should only be used together with Driver v1.6.12086 in Windows Server 2008 or Windows Vista.
This self-extracting archive includes the flash utility, the BIOS image file and the Release Notes.
Caution: If the BIOS update fails with an error message "unable to find file" or "target controller does not match", please see ASK Answer ID 15241
Installation Instruction: This file is self extracting and will unzip to the directory adaptec1220sa. Copy the expanded files to a floppy diskette. The expanded files can also be copied to a USB device or CD-R.
Shut down the operating system and reboot to DOS from a bootable floppy disk, USB device or CD-R. Insert the media with the update files. Run the flash utility program named AFU.EXE included in this download to backup the current BIOS and flash the new BIOS image.
I'm hoping to expand the bios update file onto a cd for the second drive or alternatively stick it on a USB stick.
My question is this, when I am in the dos shell, what do I do!
I suddenly realised that i've never had a need to use the command line
Enable System Protection On Local Disk (C:) With CMD
Jan 16, 2013I Have a Netbook Windosw Home Premium 64bit (no CD Drive). After an Windows Update I can't boot anymore. By searching google I found a lot of posts with the same problem, with or without solutions that worked for these people. Unfortunately non worked for me.
how to enable System Protection vy using CMD for C: so i can do a System Restore?
New Hard Disk Recognized By Windows 7 But Not By BIOS, Install Failed?
Aug 23, 2012I have a compaq CQ60 104TU laptop, my previous harddrive crashed and i has an external 500GB hardrive lying around. So, I opened it up and took the Harddrive out and inserted into my laptop.When I am trying to load windows into it I get the errorWindows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menuThe Hard disk has no data, and i don't have a CD-Rom, have made my USB bootable manually using DISKPART (this method of installation has worked for me before)[CODE]
View 1 Replies View RelatedSecond Harddrive Not Showing In Bios/disk Management
Dec 10, 2011So I am here because I am having some hard drive problems. Firstly for my Primary drive i am still running my old 250gb Hard drive (with windows already installed on this drive). Secondly, for my slave drive i have a Samsung Spinpoint 1TB Hard drive that wont display in my bios or in disk management. The 1TB drive seems to spin up fine etc. but i just can get it to display. i can format this new disk. Also i must add that my motherboard is an ASUS p8z68-v-pro board.
View 9 Replies View RelatedHard Drive Not Detected By BIOS Or Disk Management?
Aug 27, 2011I'm currently using a Windows 7 PC built by a friend of mine, but starting yesterday, its been acting up. The problem is there used to be two hard drives I can access, Drive B and Drive C. When I boot up the computer, BIOS only detects Drive C (if I'm not mistaken), and Disk Managements as well. I realized this when all the programs whose targets are on that drive are all broken on the desktop.So Drive B doesn't show up anywhere at all.
View 29 Replies View RelatedEIDE Hard Drives Connected And Show In BIOS But Not In Disk Manger
Nov 12, 2012I have two 250gb drives that are connected to my one Eide connection on my Asus P5Q deluxe Mobo. They show in the bios and on startup, but not in my computer or drive manager? How can I get them to show up so I can format and use them as extra space.
View 3 Replies View RelatedBIOS Disk Error - Resetting Boot Priority To Correct Drive?
Jan 27, 2012When there is a Restart required after a software upgrade, the BIOS on my system (Win 7/64) will go to an external HDD (I have three for storage and backup). If I force it off and go into the BIOS on startup, it will show any of the other three HDD's in the boot priority. I reset the priority to the correct drive, save and start (repeat this process several times) and finally it will start from the correct HDD. I thought it might be the CMOS battery but with a new battery in place I still ran into this. This system (HP desktop) is less than a year old.
View 2 Replies View RelatedUpdated SATA Controller And 3 Disk Drives Disappear?
Oct 23, 2012I updated the SATA AHCI controller from device manager and rebooted. Shortly after I noticed disk drives F:, Z:, and X: are gone. No big deal I'll just repartition right? No they aren't showing up in Disk Management? The driver I installed I got from gigabyte it was a preinstall driver for ahci. I just installed windows 7 64 yesterday to a Samsung 830 256gb and it was working fine maybe I shouldn't have messed with it. C: drive is working fine just the other 3. Should I roll the driver back? System restore? Did I install the wrong driver?
View 3 Replies View RelatedHeadphone No Sound Enable But No Option Showing For Enable?
Jan 20, 2013i am trying to use my headphone but its no sound on it i am trying to enable but no option showing for enable
View 2 Replies View RelatedHeadphone No Sound / Enable But No Option Showing For Enable?
Jan 20, 2013i am trying to use my headphone but its no sound on it i am trying to enable but no option showing for enable
View 1 Replies View RelatedHDDs Show In BIOS, But Do Not Show In Disk Management
Oct 14, 2011just completed a first-time new Windows 7 PC build. Successful installation of Windows 7 Pro on WD 600GB 10000 system drive. Went back and installed 4 additional HDD. (2) WD Caviar Black 1TB 7200 RPM and (2) WD Caviar 7200 500GB HDD from XP system that were used for storage.
BIOS sees all HDDs, but are not viewable in Disk Management.
System Specs:
Antec Nine Hundred
ASUS P6X58D-E MOBO
[Code].....
However, only three are visible in Disk Management. Missing (1) WD 500GB (previously used on WinXP system) and (1) new WD 1T.
Bios Clock Time Changes After Every Restart Even After Replacing Bios
Aug 23, 2011I've got an Acer Model As5742 Laptop with an i5 480M processor and 8 GB of good Ram. I'm running Win 7 Pro 64 Bit. It's only about 5 months old and this started about a month ago. I have no other problems. IE: Blue Screens or Lockups or anything, just the Bios clock changes to a random date and time after every restart. I replaced the Bios battery twice and it only effects the chore of having to reset the time in Windows every time I boot.
I'm going to send it to Acer to be repaired within a week or two, but maybe it's not a bad timing mechanism in the motherboard and one of you people have a correct solution to it. Which will save me the trouble of sending it in for a motherboard replacement.
I do have all the drivers and bios updates installed. Oh yes I've ran about 15 different virus Etc. Malware scans with several different products and they all come back clean. I ran System File Checker SFC /scannow from the command prompt several times that also comes back OK.
[BIOS] Really Bad , Wont Boot After Bios Update?
Aug 25, 2012so i did a bios update, and it wont boot after the update.its a asus m4a79xtd evo (rev 1.01g)i dont have a backup of the bios
View 3 Replies View RelatedToshiba SATELLITE C660 -15G / Download Ethernet Controller And Net Work Controller Drivers?
Nov 21, 2012I want download Ethernet controller and net work controller drivers
View 2 Replies View RelatedMissing Ethernet Controller And PCI Simple Communications Controller?
Apr 10, 2011I found this site while browsing on my iPod. Now why would I have to use my iPod when I have a beautiful new computer sitting in front of me? Well as the title says. I have no controllers, ergo, no Internet.I bought it second hand, absolutely nothing wrong with it, I think he just might of went too far when he wiped it before giving it to me.So, I came here hoping you guys could rescue me... I'm looking for the driver(s) I need, and I'm also wondering how I can manage to download them to my com if it's not online. I have;System Manufacturer: Gigabyte Technology Co., LtdSystem Model: H55M-S2OS: Windows 7 Home Premium 64bit (6.1 build 7600)Processor: Intel Core i3 CPU 540 @ 3.07ghz (4 CPUs)BIOS: Award Modular BIOS v6.00PGg that's all good, I read it all of my DxDiag.
View 2 Replies View RelatedDownload The Ethernet Controller And Network Controller Drivers?
Jun 18, 2012My Toshiba Satillite L655-s5153 Laptop doesn't reconize the ethernet port when I plug in my wireless router to the ehternet port. How can this be fixed? I have no internet connection.
View 1 Replies View RelatedDrivers For Mass Storage Controller And Multimedia Controller?
Jun 22, 2012I am looking for these drivers. I have a Sony Vaio desktop that I upgraded from Vista 32bit to Windows 7 64bit. The model is VGC-LT32E.
View 7 Replies View RelatedMultimedia Audio Controller, PCI Simple Communications Controller?
Dec 20, 2012multimedia audio controller, PCI simple communications controller
View 1 Replies View RelatedEthernet Controller Network Controller And Others Missing?
Sep 1, 2011I installed windows 7 ultimate on my dell xps15, but can not connect to my wireless network and cannot connect to the internet through an Ethernet cable, i looked around in my devices and noticed these had a yellow exclamation point next to them:[CODE]ecause of this i am not able to use usb drives or connect to the internet in any way on that computer, i dont know what i need to get this fixed and since i cant connect to the internet i sadly cant just update them like i would like to
View 7 Replies View RelatedDrivers For Pci Simple Communications Controller And SM Bus Controller?
Oct 28, 2011I have a J & W H61M-D3 (B3) motherboard with an Core i3 2100,4 gig DDr3 ram.Windows 7 professional 64 bit Im despritly looking for the drivers for pci simplecommunications controller and SM bus controller
View 2 Replies View RelatedHP BIOS Update Stuck At "Verifying New Bios Image 100%"
Jan 19, 2011I have a five-month old HP Compaq Presario Laptop, which has been working fairly decently (I've had a few virus scares, and my Norton quarrentined something a twenty days ago). On HP's advice, I just updated the BIOS on my laptop. It's currently stuck at Verifying New Bios Image, and it's at 100% - It's been stuck that way for a half-hour plus.
View 14 Replies View RelatedSamsung Bios Software Update For Bios / Update Fails
Dec 1, 2012My Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers,
View 3 Replies View RelatedDynamic Disk To Basic Disk When Windows 7 Is Installed On Dynamic Disk
Mar 13, 2011so i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?
View 1 Replies View Related
