Connected Via Vpn In Xp Mode But Cannot Remote Desktop

Feb 22, 2012

i purchased windows 7 professional to virtual pc to windows xp so i can vpn into my works network.

i've downloaded virtual pc and windows xp, start a session and able to log into my works network via vpn.

i lose internet connectivity once connected by vpn on my windows xp and when i try to start up a remote desktop session, my attempt times out having not connected. i am using a router but this is not the issue because i brought a laptop from work who only has windows xp on it and was able to log in the network.

i've disabled firewalls both in xp and windows 7 but no success. i've searched forever on these forums attempting different settings. i log into my workstation at work and my profile has full access so it is really with windows 7 or the the virtual pc xp

View 6 Replies


ADVERTISEMENT

Staying Connected With Remote Desktop While Rebooting?

Nov 29, 2011

Is there a way to stay connected to a computer via remote desktop while it reboots, or at least automatically reconnect? I ask because I need to take some screen captures of the BIOS settings which I can only get into on bootup. I can't use my screen capture application while in the BIOS, or at any point during bootup, but I can from another computer that's remotely connected to it - that is, if it could BE connected while at this stage in the bootup.

View 3 Replies View Related

Staying Connected With Remote Desktop While Rebooting?

Nov 29, 2011

Is there a way to stay connected to a computer via remote desktop while it reboots, or at least automatically reconnect? I ask because I need to take some screen captures of the BIOS settings which I can only get into on bootup. I can't use my screen capture application while in the BIOS, or at any point during bootup, but I can from another computer that's remotely connected to it - that is, if it could BE connected while at this stage in the bootup.

View 1 Replies View Related

Remote Desktop Into XP Mode VM From The Outside World?

Jan 21, 2012

I have Bridged Networking set up in my XP Mode, and have set it to my primary network adapter (a Rosewill WiFi adapter, if it matters), and I need to be able to connect to it with Remote Desktop from another computer, either on the same network or on the outside world.

I have a static IP set as 192.168.3.249, and the RDP port is the default (3389).

I can not access the VM from the host computer, a computer on the network, or the outside world. (I do have port 3389 forwarded to the VM (192.168.3.249) from my router/firewall).

I can not seem to get it connected.

I tried installing a second VM with XP Pro (not the XP Mode, but still in MSVPC), and set up similar settings (except different IP and a custom RDP port), and can connect to it fine from the host, the network, and the outside world.

View 3 Replies View Related

Remote Desktop Connection Runs In Safe Mode But Freezes Otherwise

Feb 23, 2012

I have a Dell XPS studio desktop that runs Windows 7 Home and I have been trying to connect to my work computer, which runs Windows 7 Professional. I connect via the internet through Remote Desktop Web Connection on Windows Small Business Server 2003. I can connect to my computer fine, but usually after only a few seconds of clicking on files, it freezes on me, causing IE to freeze. When I do this in safe mode, it does not freeze, so that tells me there must be a conflict on my system. I have a suspicion that it's something to do with my ATI graphics driver.

View 2 Replies View Related

Remote Desktop Connects But Remote Host Screen Stays Black?

Nov 8, 2011

I know there have been a number of posts on this subject but I have been unable to find a solution. I have 2 Windows 7 machines, both running SP1.

My HP Pavilion is running 64-bit and my Dell Latiude E6400 is running 32-bit. I can successfully RDP from my Dell and even my Apple iPad (via an RDP client) into my HP Pavilion. However, the problem is that when I try to RDP from my Pavilion into my Dell I get connected but all I see is a BLACK from the Dell machine. The only thing i can see is the Status bar at teh top telling me that i am connected. A few moments later I get a popup message telling me that the machines have failed to communicate.

I have confirmed that RDP settings are identical on the Pavilion and Dell. I have even downgraded the Dell NVIDIA graphics driver to an older version based on the recommended version on the Dell support web site.

View 2 Replies View Related

Windows 7 Remote Desktop, Remote Pc Screen Locks When Trying To Install Software

Nov 7, 2012

I am using Windows 7 Pro 64bit, trying to use Windows remote desktop to connect to another PC in the LAN and install software. Right click on the .exe and choose run as admin. As soon as I do that I get a black screen with 2 white bars in the upper left hand corner(looks like a pause button). The user who's pc I am connected to sees the log inbox for the admin creds, how ever I can not get to it. How can I make that screen stop popping up?

View 1 Replies View Related

Remote Desktop Client 6.1 Cannot Connect To Remote Computer

Aug 30, 2011

We have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect.I receive an immediate failure with the text "This computer can't connect to the remote computer. Try connecting again...blah blah"I have a server 2008 r2 with Network level authentication enabled. I have 8 other systems that are hardwired, at different geographic locations and all connect fine. I have not made any changes on the server side since this problem seems to be local to this client only. On the client I have made the following changes/observations. I have disabled the firewall, cleared the remote desktop cache, remove the MRU entries from the registry, verified that port 3389 is open via telnet. I have been bashing my head for days trying to figure out why this one box is not working. The problem occurs for every user on the box including the admin.I don't receive the box that prompts for warning if there is a server authentication issue but I think that is because I selected ignore at some point and said yes to continue. I'm not sure where that cache resides to delete that selection.

View 1 Replies View Related

"remote Desktop Can't Connect To The Remote Computer"

Nov 12, 2012

i would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.

View 1 Replies View Related

Getting XP Mode Apps To Treat Usb Drive As Connected

Oct 14, 2009

I recently installed windows xp mode on my windows 7 installation. I also often use acronis true image 9.1 to image disks. I have a USB connected SATA drive bay that I use for imaging the drives, and I am wondering if there is a way to configure it automatically treat that device as connected instead of shared. I would like to be able to launch the app from my desktop instead of having to start the virtual PC every time. Any thoughts?

View 3 Replies View Related

Remote Desktop Through VPN?

May 18, 2011

Searched the internet, forums and tried everything even removing IDT.And getting a major head ache out of this. x64 notebooks.But on 1 single notebook the RDP does not work when connecting through a VPN.(Sony Vaio S-series factory customized i7, 8GB)The office has a Draytek VPN with an 2003 AD domain.Other notebooks do not have the problem. Remote desktop locally works Remote desktop via branche office works (through hardware based vpn tunnels) MS VPN connects, network is browsable MS VPN -> RDP shows: [Configuring remote session] But after a while connection is denied MS VPN -> Fileshares - functional MS VPN -> Webserver, FTP server - functional Maybe one of you guys have a hunch why this specific situation doesn't work?

View 2 Replies View Related

Computer Won't Go Into Sleep Mode When HDMI Cable Is Connected

Nov 9, 2011

I have an Acer Aspire laptop running Windows 7 Home Premium x64.

I regularly connect it to my TV monitor via HDMI cable and fall asleep watching movies (played on VLC or Windows Media Player). I set the computer to go to sleep after 1 hour.

Multimedia Settings are set to "Allow computer to sleep" under "When Sharing Media" in the Power Management section.

Screensaver is disabled. I have overrided my audio driver, since powercfg command suggested it may be a conflict.

If I am playing a movie without the HDMI cable plugged in, the computer goes into sleep mode right on schedule. It is only when I have the HDMI cable plugged into my TV monitor, that it refuses to enter sleep mode.

View 1 Replies View Related

Printer When Connected To Usb Port Causes Monitor To Saving Mode?

Nov 18, 2011

While my pc is on, I plug in the usb cable of my canon pixma MP276 printer. When the usb cable contact to the usb port, the lcd monitor goes into power saving mode/sleep mode (black) immediately and never turns on again no matter what I do (clicking on mouse, pressing keys on keyboard)I then need to restart the pc and everything will be normal.

View 6 Replies View Related

Remote Control For Desktop Pc?

Nov 22, 2011

My husband has a Win 7 pc custom built by Fry's. Is there such a thing as a remote control (I guess it would need a usb dongle) to control it? Like to watch Netflix or Xfinity TV on the computer while he's in bed. He has a large monitor and then I could get him to get the pc off the kitchen table and upstairs. I tried using google but just got hits for remotely accessing from another computer. Didn't know exactly what to search for. His HP laptop came with a remote but we've never used it.

View 3 Replies View Related

Remote Desktop Cannot Connect

Jul 8, 2012

I am trying to connect to another Windows 7 machine on the same router, but it will not connect. I have remote desktop enabled and checked under the computer settings, but when I right click the computer in the network & sharing center and try to connect, it won't work. I also tried manually entering the computer's network address but it failed. Both machines are Windows 7.

View 3 Replies View Related

See The Real Remote Desktop?

Feb 27, 2012

Using Remote Desktop I can connect my one Win7 machine to my other Win7 machine.

However I don't see my "real" desktop - by that I mean the remote machine spawns a sort of virtual desktop and shows me that - I can't run the graphic card control panel for instance - and if a monitor is plugged into the remote machine you just see the login screen not what I'm doing.

So is it possible to see the 'real' desktop using Microsoft Remote Desktop? Or do I have to find some other remote control software - like VNC or something like that.

View 5 Replies View Related

Remote Access To Desktop

Feb 16, 2012

Here is what i would like to try and do. I have two computers, a Desktop and a Laptop. My Desktop sits at home, while my laptop goes with me to school or anywhere else that i need it.Now, i would like to see how i can set up my computers (or network?) so that i can access my Desktop files via my laptop online.I want to try and carry as few files on the laptop as possible, such as if ever lost or stolen, i wont have my data or files compromised/stolen.I also plan to install a SSD on the laptop, in order to try and make my battery last longer, but SSD's are still too expensive (i have a 250 HDD right now), I'm thinking of getting a 64GB SSD and trying to carry as few files as possible. Getting a 250 GB SSD is just way too expensive right now.I have heard that Windows has a thing called Remote Desktop Connection, but i have tried to use it, but i never got it to work somehow. I am running Windows 7 Home Premium.

View 2 Replies View Related

Logging In With Remote Desktop?

Apr 23, 2011

I am using windows 7 ultimate on my desktop and laptop. I am trying to connect to my desktop. On my desktop I have created a credential. the name of my laptop is laptopTo make things simple lets say I put user name abc and password 123. From my laptop I put in abc for user and 123 for password I can connect to the desktop but it says invalid user name or password. I have tried creating different user names and passwords on the desktop fot the laptop. What am I doing wrong? I do not understand why this is so difficult. Its problably not but the help section in windows 7 does not give enough information.

View 1 Replies View Related

Remote Desktop Around The World

Jul 7, 2011

When i try to add users, i only find my self how do i add other users ?
(let's say someone around the world ? )

i forwarded the port, did everything.
now i need to add the user to give him acsses ( Allow remote acsses to you computer > Select Users > Add)

View 2 Replies View Related

Cant Do A Remote Desktop Login

Aug 26, 2011

I just set up a new computer and they both are on the same wireless network and are even connected to eachother through bluetooth. I'm trying to connect to my laptop from my desktop tower (the new one). The Remote desktop thing is asking for a log-in for the laptop. Well I do have a password, so I enter in my user name Shannon, and then my password....It doesn't work...try it again. and it doesn't work. Even though it accepts the username, the password isn't accepted, and I know 1000000% that it is right. So whats going on? The tower is running Windows 7 Home Premium 64-bit and the laptop is running Windows 7 Professional 32-bit.

View 4 Replies View Related

Can't Get Remote Desktop To Connect

Oct 16, 2011

Remote Desktop Allowed
Regedit set to 3389
Norton 360 mstsc.exe allowed in traffic rules
ping to workstation replied

just can't get remote desktop to connect? any other things I should check?

View 9 Replies View Related

Remote Desktop Connection

Jan 5, 2012

I am running a lite version of windows 7 32bit in which the dev took off remote desktop. I have looked everywhere but cant find a guide to reinstalling it.

View 5 Replies View Related

Remote Desktop Windows 7 Pro To XP Pro?

Mar 19, 2012

I have a desktop in a remote location used to connect to a PC in main location to run a program. The new computer put in the satellite office running Windows 7 Pro 32-bit did not have parallel ports and I needed two ... So I installed two PCI-E cards to add the ports. These print fine locally but the printers do not pass through to the Windows XP Pro machine.How can I make the PCI-E LPT ports available in the remote session?

View 2 Replies View Related

How To Connect To XP From Win 7 Via Remote Desktop ?

Oct 17, 2009

Just recently immigrate to win 7, I used to connect my XP work computer via remote desktop from home, now I cant . The ping command works fine. How can I solve this problem?

View 9 Replies View Related

Remote Desktop Tab Missing?

Oct 27, 2011

I'm using windows 7 enterprise at work and recently on several computers remote desktop tab under system properties > remote is gone. was searching forums for this problem but found only answers that after removing service pack 1 remote tab was back, but then i have a question how come 95% of other computers don't have this problem and also tried installing fresh installations today on thinkpad edge 11 with sp1 and at the beginning remote tab was there but after installing anti virus , office and other crap and several resets remote tab was also gone

View 2 Replies View Related

Remote Desktop Slow Across LAN?

Jul 27, 2012

Have setup RD for Win 7 64 Ultimate (both boxes) on internal LAN. Connects no problem and the LAN operates at almost full Gbps when moving files between the two. I've disabled the A/V and firewall (Kaspersky A/V 2012 on client, MSE on host) but no changes.Even with all the RDP options stripped down it is slow. Should it not be at virtual speed even with all the bells & whistles across the LAN?

View 14 Replies View Related

How To Remote Desktop Ip Address

Aug 28, 2012

How to remote desktop ip address

View 9 Replies View Related

Cannot Start Windows 7 In AHCI Mode When Multiple Drives Are Connected

Nov 11, 2011

i'm working with a new pc build that uses a 60 gb ssd for its boot drive, and which is also reusing some "old" sata hdds for storage.

at the time i installed windows 7 ult 64, i had only a new ssd plugged in, and the bios was set to ahci mode. the installation went fine and i was able to boot into windows afterwards without issue.

then, i connected a wd caviar black sata hdd to use as storage, with the ssd being the boot drive. with both of them connected, windows will not get past the starting windows screen.

i made this video of the program before i understood that it was a drive controller issue: startup problem - Internet in it, you can see that windows boots fine in ahci mode with just the ssd plugged in, but that when the backup sata drive is also connected it doesn't get past the starting windows screen.

for the record, this caviar black hdd was my previous boot os, and it also has a windows 7 install on it (which i've renamed the base folder of), but it is not booting from that hdd. also, i have tried the same thing with other "old" sata hdds that do not have any previous windows install on them, and the result is the same thing which is shown in the video.

View 9 Replies View Related

Using Remote Desktop Function With Windows 7 X64

Jan 12, 2012

How can I use the remote desktop with Windows seven x64?

View 2 Replies View Related

Remote Desktop Connection Over The Internet?

Jun 25, 2011

I normally use remote desktop connection over my home network by simply typing the IP address assigned by the router to the computer I am trying to connect to.Now I am in a hotel in another city. I tried using the ip provided through ipconfig and whatsmyip.com, but I am unable to connect through remote desktop connection.

View 6 Replies View Related

Mouse Visible Under Remote Desktop?

Sep 9, 2011

We have recently upgraded to Windows 7 at work.Our work have enabled access to my main work machine which is still on XP. I have just logged in, and for some reason the mouse icon was still visible on the machine and it was really annoying.So, here how I was connected:

MyLaptop (Windows7 Home) > Secure RDC onto Windows XP > RDC onto Windows 7 Pro

Before the last machine was upgraded, there was no extra mouse visible, but suddenly there is another mouse icon following my mouse icon.

Is there anyway this extra mouse icon can be removed?]

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved