Connect A Graphics Card With 6pin Power Connector, To A 4pin?
Jan 29, 2012
can I use a 6-pin graphic card when I only have 4 pins on my motherboard? I want to upgrade to a gtx 550 ti, and my motherboard is Asus P5KPL AM-SE. Can I use this card?
My system randomly turns off. no blue screen. No crash dump. no windows shutdown screen. This isnt really about the shutdowns.
1 - What happens when the 4pin connector of a 20+4 pin mobo power plug is disconnected
2 - Does the 4pin connector give more stability to a pcie2.0 x16 Graphics Card?
3 - What damage could have been done?
Ive swapped the graphics card out with a Power Color HD4850. The shutoffs happened with both. I have four ram chips. i took out 2 and it still shutoff. Im now trying the other two.
Right I have a 550ti but only a 300w power supply. My performance is shocking on it. Is this cause my power supply? It's recommended to have a 400w +. Also my processor is only at like 70-80% use.
just recently I had the power connection fail on an INTENSO USB3 ext drive -- as it was a 3GB drive I didn't want to lose all the data on it.Anyway I cracked open the case and it was simply a 3GB SATA Barracuda 7200 RPM normal HDD with a power and USB connector card embedded in the case.So I just removed the HDD and connected it up into a SATA slot on my desktop and it works fine as an INTERNAL drive (still fast too).Also frees up a valuable USB3 slot on my computer. (I only have 2 USB3 slots so each one is valuable).If I really want to use this as an external drive then I'd just get another SATA==>USB3 enclosure --but the disk is a bit heavy to use as a portable.
( I got the INTENSO drive for 70 EUR -- so even breaking it up it's still a bargan for a 3TB Barracuda SATA drive - whish Id' bought to or 3 of these and converted them to INTERNAL HDD's. !!).eems most of these larger external powered (not self powered) USB drives are simply normal HDD's contained in a SATA==>USB2 or USB3 container.
What is the name of the cable that will connect into the small (male) part of this connector ? On this page they mention a Molex Adapter, when I search for Molex Adapter I don't find a female connect with a power adapter.
i have heard a lot of my friends saying that they are unable to play high resolution and high definition games on their pc and told that they are on a low budget to buy a graphics card.here is a solution for that:there is a software named 3-d analyzer available in the internet which acts as a virtual graphics card for playing games. you can enter the graphic card needed from the 4 available graphic cards available and then you can get the attributes of that graphic card..if fine tuned,you can play games at the range of a 128mb ram virutal graphic card on your non graphic card pc. note:graphic intensive games,that requires atleast 512mb of graphics memory can't be played through 3d analyzer if you don't have a graphic card,but you can try running it if you have a 256/128 mb card. steps for using the 3-d analyzer software, *first download the file from here, *then extract that software and open the software, *then,select the exe file of the game that you want to run, *choose the select option, *then you can choose the attributes the options you require to play the game,*the attributes may be pixel shader or disable rendering in the game or emulation or some other options specified, *then,enter the device id and the vendor id for the graphics card you need from the available graphics card on the right.*i would suggest the ati radeon 9800pro to run most of the games like fifa 08/09 or prince of persia two thrones/sands of time, *then choose the run option and then i assure that the game would run for you at a decent/playable speed. note:1.if it shows any error that a file is not found pls reinstall the software.2.if the screen turns black/blank then play with the options in the s/w, by trial and error method,if fortunate,may be,you'll be able to run your favorite game.3.if pixel shader/shader version x.x not found,then select the appropriate shader model and run the game. all the best..happy gaming..if any queries post it below.how to: use 3d analyzer video at Internet
I purchased diablo 3 for my husband & my video card is not supported so he's unable to play, my computer is a HP P624 f-b desktop with a Intel GMA intregrated graphics, I am aware I need to up my power supply also, I have no idea what video card can be used to upgrade so the game is playable, not looking to spend a fortune?
I've completed a new custom build, but have had problems with BSOD from the beginning with any installation of Intel Graphics drivers or the installation of any graphics card.
When I first completed the build, the XFX-7950 Black was installed. I booted to BIOS without issue, but when I inserted the Windows 7 (64 bit) it would boot through the windows logo screen but immediately BSOD right after going to the first install screen.
I removed the graphics card, and was able to complete the full Windows install without issue. I updated Windows and the drivers on the system but as soon as I installed the Intel 3000 Graphics driver, it would BSOD on every restart. I recovered back prior to the Graphics driver install and installed all other drivers. I updated the BIOS to the latest version.
I have reattempted the XFX 7950 multiple times in different slots, but with the same results. I also attempted my Radeon HD 4550 from my old computer but it gave the same results. It always boots through the Windows logo screen, but BSOD within a few seconds of reaching the password screen.
I broke down and installed Driver Whiz, which did detect multiple outdated drivers that I had not caught, but none of these fix the issues.
I've attached the requested zip. I don't think all BSOD's are showing up, as I've had to use recovery points after installed drivers didn't work. The last .dmp on 19 JUL was a Intel Graphics driver install attempt that I pulled off in safe mode before recovering back to the pre-driver point.
System: ASUS P8Z68-V Pro/GEN 3 Intel 2600K XFX R7950 Black Edition OCZ 850W Crucial 128 GB SSD Seagate Barracuda 1 TB HD Corsair H100 Windows 7 64 bit (full)
I've got the power cut while PC was running (w7). After rebooting I'm not able to connect to the internet anymore.In Device Manager, under Network Adapters there is a "Realtek PCIe GBE..." device properly installed.But under Other Devices there are now more entries with exclamation mark: - Network controllerMultimediacontroller - PCI Communication controllerI tried updating the drivers, then deleting and reinstalling but no success so far. Still can't connect to the internet.The browser can see the router, at 192.168.1.1I don't know where the problem is
I've got the power cut while PC was running (w7). After rebooting I'm not able to connect to the internet anymore.
In Device Manager, under Network Adapters there is a "Realtek PCIe GBE..." device properly installed. But under Other Devices there are now more entries with exclamation mark:
- Network controller
- Multimedia controller
- PCI Communication controller
I tried updating the drivers, then deleting and reinstalling but no success so far. Still can't connect to the internet. The browser can see the router, at 192.168.1.1 I don't know where the problem is.
my computer automatically turn on when i connect it to the power source....And after few seconds it restarts its self...this cycle repeats its self over and over again until i dont disconnect the power source.
My laptop is 1 year old and has worked great until a month ago. I was unable to connect to the internet and thru troubleshooting got a "missing network adapter". I have since upgraded the driver. I also purchased Registry cleaner program that supposedly found over 400 registry errors.I found by accident that I was able to connect normally if I turned the PC off by holding the power button. Then restarting, I got a message to start windows normally. When I did, and then it connected to the internet normally.Now, each night if I leave the power connected to the laptop and shut down windows from the Start command it works fine. I do not want to have to leave the power connected. Toshiba tech support is unable to help other that suggesting I return the PC to the "out of the box' status which is totally unacceptable to me.
I was stupid and accidentally uninstalled my AMD Catalyst Program in an attempt to update the drivers. Now I cant switch to the card from the integrated Intel card. I can't restore the computer or re-install the program. When I try to re-install it, its doesn't work but there are no errors.
the xfx 1gb 4850 i had been eying is finally off the shelves the only place i find it is at frys and it costs 150+ s&h. do you guys have any other graphics cards you would recommend within the 100-150 usd category with at least 512 mb of memory.
Currently I have a graphics card Geforce 8400 (Nvidia). I want to buy another card HD Radeon 4890. I have a Dell Optiplex 760 desktop. Do both cards work in my pc from different hardware manufacturers?
how to keep my Ethernet card powered after shutting down my Computer. I would like to use wol(wake on lan) to turn my computer on while I'm away from home so I can use remote access to edit some files. I have configured the wol and am receiving the packets, but every time I turn off my PC the LAN card turns off as well,thus not letting me wake up my PC.
I recently upgraded from XP to Win 7 Ultimate 32bit. I have always had two graphics cards - NVIDIA GeForce 7025 and AMD Radeon HD4300/4500 with the latter used to feed via HDMI cable to my Plasma TV.Since the upgrade, the AMD card appears to be the default card and any attempt to run the NVIDIA Control Panel results in a warning that "You are not currently using a display attached to an NVIDIA GPU".
The PC functions okay but I've lost a number of controls I was familiar with via NVIDIA and I may also be losing performance too. How do I get back to where I was under XP when NVIDIA was the main card ?
I haven't posted on here for a while because I've been taking a break from my computer and playing LOTRO which was causing me occasional bsod's which were really getting me down. I took a break from LOTRO for around 6 months and not once did I get a bsod on my computer despite my husband and son playing other games on my computer.I've recently come back to LOTRO since the new update of migrating to the US servers to see how it would run on my computer and to see if the bsod's returned. They did and the new update hasn't changed a thing. Each time I get the bsod my graphics card is named as the cause of the culprit.I have a Dual GPU and I found that AMD says this. Quote.For The Ultimate Visual Experience, be sure to select ATI CrossFireX ready motherboards for AMD and Intel processors and multiple ATI Radeon HD graphics cards. Now I've done a search and it looks like my motherboard - Gigabyte GA-770T-USB3 -isn't Crossfire ready.Before I take the plunge and buy a crossfire ready motherboard, would having a Dual GPU cause problems if my motherboard isn't crossfire ready? Or would it not make a difference as I've only got the one card? I've downloaded the profiles for the ATI drivers for Crossfire/dual GPU's but I haven't installed it yet, as I'm not sure whether because my motherboard isn't Crossfire ready it's going to cause further conflict and even more problems when I'm playing LOTRO.I didn't realize that when I got the graphics card that it was a dual GPU
I tried to update my ATI driver and uninstalled the old ones first. When I went to download the new drivers, it said it "The version of your graphics adapter is not supported." I went to check in Device Managers, and now under Display Adapters it no longer lists my ATI HD 5650 graphics card, neither does dxdiag (which i ran a week earlier and it did detect the graphics card). Also, 'Standard VGA Graphics adapter' has a yellow "!" but when I tried to update the drivers for it, it says I already have the most recent ones but still has the "!".
i currently have a nvidia 8600 gts 256mb graphics card and i want to upgrade since i bought crysis 2 an this card is not runing crysis 2 properly.. too slow fan noise goes loud etc.
i just installed windows 7 and its not picking up my gtx 580 nividia card : not in device manager and i try to run the driver software and it says failed im running my computer on the motherboards graphics card its a tiny 17mb but its running things for the moment
I am running Windows 7 service Pack 1, 32-bit on a HP Pavilion, Pentium 4, 3.0 ghz, 1.0GB memory, 250w power source. I had a ATI Radeon 9250 PCI graphics card, 256MB ran great on XP. I know its not compatable with W.7. I play only a few older games, like EA Sports NHL 2008 & Tiger Woods Golf, is there any PCI card I could buy that will work with Windows 7?
Newegg.com - HIS H487QT1GP Radeon HD 4870 1GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFire Supported IceQ 4+ Turbo Video Card - Desktop Graphics / Video Cards
Newegg.com - ASUS EAH4890 TOP/HTDI/1GD5 Radeon HD 4890 1GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFire Supported Video Card - Desktop Graphics / Video Cards
i was wondering witch graphics card is the best bang for the buck, me and my friend were having a dispute of this the gtx 260 has a slower clocks than the ati cards and is 448-bit but the other 2 have higher clocks but less memory, whats the best one?
My graphics is a GTX 460. I built a new computer on the 10th of january and up until tuesday the 17th everything has been running perfectly. But on tuesday my graphics card driver would continuously crash and then recover.Now my graphics card has started to turn off completely, and the computer would reboot. This mostly happens while playing a game. But it also happens while browing the internet too.I've my graphics card in my old computer right now, and everything seems to be running fine.
Quote: AMD set to release DirectX 11 graphics card
The launch of AMD's DirectX 11 graphics card will coincide with Microsoft's Windows 7 launch in October
Advanced Micro Devices will soon launch a graphics card that supports Microsoft's DirectX 11, which aims to make graphics in Windows 7 seem smoother and more realistic.
The release of AMD's first DirectX 11 graphics card would coincide with the launch of Microsoft's upcoming Windows 7, AMD spokesman John Taylor said on Thursday.
The DirectX 11 graphics card will belong to the ATI Radeon line, but Taylor declined further comment on product details or pricing.
The graphics card maker has been demonstrating an ATI Radeon graphics card with DirectX 11 support since June, but has not made a specific product announcement yet.
Microsoft's upcoming Windows 7 has built-in support for new DirectX 11 tools, but there is no hardware available yet that supports those tools. With the new card, AMD will beat rival Nvidia to market.
Nvidia has also said it would support DirectX 11, but has not yet made a product announcement. Intel, which mostly offers integrated graphics on chipsets, in June released updated graphics drivers for Windows 7, but offered support for only DirectX 10.
The DirectX 11 tools include a set of APIs for realistic images and better sound when playing games or watching movies. For example, game developers will be able to create smoother and realistic images in a game through better three-dimension modelling.
Most of the discrete graphics cards support existing DirectX 10 and 10.1 tools, which are built into Windows Vista.
DirectX 11 tools are also designed to help Windows 7 recognize multicore systems to improve performance of graphics and other applications.
A feature called "Compute Shader" harnesses the parallel processing capabilities of GPUs (graphics processing units) to improve gaming on PCs. These improvements could make games more realistic through faster frame rates.
The tools also help break up multiple tasks effectively over existing CPU and GPU cores. For example, DirectX 11 will enable video conversion on the fly simply by dragging and dropping video from PCs to portable devices. Read more at the forums...