Can't Connect To Internet After Power Failure?
Apr 18, 2012
I've got the power cut while PC was running (w7). After rebooting I'm not able to connect to the internet anymore.In Device Manager, under Network Adapters there is a "Realtek PCIe GBE..." device properly installed.But under Other Devices there are now more entries with exclamation mark: - Network controllerMultimediacontroller - PCI Communication controllerI tried updating the drivers, then deleting and reinstalling but no success so far. Still can't connect to the internet.The browser can see the router, at 192.168.1.1I don't know where the problem is
View 5 Replies
ADVERTISEMENT
Apr 18, 2012
I've got the power cut while PC was running (w7). After rebooting I'm not able to connect to the internet anymore.
In Device Manager, under Network Adapters there is a "Realtek PCIe GBE..." device properly installed. But under Other Devices there are now more entries with exclamation mark:
- Network controller
- Multimedia controller
- PCI Communication controller
I tried updating the drivers, then deleting and reinstalling but no success so far. Still can't connect to the internet. The browser can see the router, at 192.168.1.1 I don't know where the problem is.
View 6 Replies
View Related
Oct 15, 2012
My laptop is 1 year old and has worked great until a month ago. I was unable to connect to the internet and thru troubleshooting got a "missing network adapter". I have since upgraded the driver. I also purchased Registry cleaner program that supposedly found over 400 registry errors.I found by accident that I was able to connect normally if I turned the PC off by holding the power button. Then restarting, I got a message to start windows normally. When I did, and then it connected to the internet normally.Now, each night if I leave the power connected to the laptop and shut down windows from the Start command it works fine. I do not want to have to leave the power connected. Toshiba tech support is unable to help other that suggesting I return the PC to the "out of the box' status which is totally unacceptable to me.
View 2 Replies
View Related
Apr 19, 2009
I've been using Windows 7 since it went public, within the last 18 hours I got about 15 BS'sOD. I think the problem had something to do with the fact that I plugged my laptop into a power strip BEFORE turning the power strip on...idk. But whenever I plug in my laptop it takes about 30 seconds for a BSOD to show. I copied a couple down, here they are:
1. 0x0000008E(0xC0000005, 0x8BFAE3D1, 0x91C8DA94, 0x00000000)
2. IRQL_NOT_LESS_OR_EQUAL
0x00000000, 0x00000002, 0x00000001, 0x82C5DC91
3. 0x0000008E (0xC0000005, 0x8CBB63D1, 0x8BA84A94, 0x00000000)
KI1.sys - Address 8CBB63D1 base at 8Ca0900 Data Stamp 4911af5e
4. STOP: 0x0000008E ( 0xC0000005, 0x8BDB73D1, 0x8BB8FA94, 0x00000000 )
Kl1.sys - Address 8BDB73D1 base at 8BC0A000, Data Stamp 4911af5e
What I've tried:
Unplugging the power cord. Result: nothing happens but the battery drains so I eventually had to plug back in. Removing the battery. Result: I didn't get a BSOD for about 25 minutes. Using a different power source with battery. Result: Same as with original power source. Using a different power cord. Result: BSOD after 30-45 minutes. Plugging in computer when closed. Result: this works but I can't use the computer.... Currently I'm using 1, 4, and 5.
FYI: I posted a similar message on the Microsoft forum but all they told me was that it was a driver problem...I'd like to know is there anything I can do? and what those bug codes mean.
View 4 Replies
View Related
Jan 17, 2013
as stated in the thread title, whenever i play a Internet video on my pc, it powers off. originally i thought it was a problem with the browser or the flash plugin, but after doing some research, i found that it is caused by the video card. something is going wrong, to confirm this, i ran a stress test with atitool, this caused power failure, and then, in order to be absolutely sure i tried to play "team fortress 2" but it crashed at the menu. initial thoughts might be that it is overheating, which i will check, but i doubt that is the problem since i have a quite well ventilated full tower case.
View 1 Replies
View Related
Jan 31, 2012
system whet off and refused to power on, only to display a message telling me that it has encountered an Error
View 4 Replies
View Related
Sep 9, 2011
I was among the 1.4 million SDG&E customers that lost power on Sept 8, 2011. At around 10:30PM the power came back on and I attempted to boot up my Win 7 machine (which was on at the time of the outage). It gets through POST, displaying the list of auto detected devices, clears that screen to black and then displays a flashing white caret on the black background and gets stuck there.Any ideas on how to restore without re-installing Win 7 (and everything else)?
View 3 Replies
View Related
Apr 6, 2012
On an HP pavilion P4 3.0ghz 160gb hdd 1.5gb ram.While upgrading from Vista to Windows 7 i had a power failure. Now when i reboot power comes on fans turn, hard drive, DVD drive lights blind during POST. However, no response at all to the monitor, no beeps, no display nothing at all. Can't even get into the BIOS.
View 11 Replies
View Related
Sep 14, 2012
have been using my pc lately and iv been getting the driver power stat failure alot lately and what happens is my internet goes out and when I shut down it takes at least 5 minutes until it goes BSOD and the error message appears cll me how to fix it as soon as possible because this has been going on for a while and I want it to stop. So can anyone tell me step by step what to do so I can fix this issue and get on with using my pc
View 1 Replies
View Related
Mar 3, 2012
Recently, after a pretty heavy storm we had a power failure. At the time I was using an .exe program ...and I also had firefox operating. When I booted my computer up again neither program would function. I wasn't too bothered about firefox, but the other .exe program is pretty important as I need it for my job. Anyway, I managed to get the .exe program working again by opening it with the Compatibility Wizard and running it as if it was XP. (However it wouldn't permanently "save" in this mode, so had to go through the wizard everytime I had to use it).
Before I "found" the Compatibility Wizard solution, I restored the computer to before the power failure, but this didn't make any difference. Now I have had a second power failure. Once again with the .exe program open. And now it won't open at all, either with the wizard or without it. I reinstalled the program...and it still didn't work. (Although Firefox did when reinstalled). I have done a Registry Repair with RegSofts registry repair software....but still nothing. Now I am "a bit" stuck, to say the least !
View 8 Replies
View Related
May 18, 2012
I've been experiencing issues with my computer. It tends to blue screen and reads "Driver_POWER_STATE_FAILURE". I've tried to run some scans and diagnostics and even backed up my PC and then rebooted it with factory new settings, but it is still BSOD. I have a dump file, but I cannot post it because it says I do not have permission to open or attach it.
View 3 Replies
View Related
Jul 15, 2012
MSI S6000 running OEM windows 7 Home Premium 64 bit - 1.5 yearsIntel I5 4GB Ram unning IE 9
View 3 Replies
View Related
Jul 31, 2012
I periodically get a driver power state failure BSOD. It's happens about once a week or so.
View 4 Replies
View Related
Aug 16, 2012
BSOD Driver Power failure?
View 6 Replies
View Related
Nov 17, 2010
My computer wouldn't start after a power failure during resizing partitions. I tried downloaded and used Repair Disk for Windows 7 64bit, which leads to the relevant screens but after a repeated restart of the system a note "...Interrupted operation: Insert the Recovery CD or other Recovery Media and reboot your PC..." still appears for already couple dozen restarts. I've purchased my Sony Vaio VPC23FX laptop with no additional disks and anything. Should I buy a new copy of Windows 4 Home Premium and start everything from a blank page or are there any other ways to make the computer start properly?
View 9 Replies
View Related
Aug 11, 2011
I get this bluescreen with a power driver state failure 0x0000009f. I just restarted my pc but then a week later i got the same message.
[code]...
View 8 Replies
View Related
Jul 20, 2012
Why doesn't my computer boot up after power failure? The bios is set to boot after power failure. I have to jump start the motherboard to get it to boot. What causes this to happen? Is it a power surge? I can unplug and plug the computer back in and have no problem booting. If I have a power failure, no Boot. The last power failure was a sudden off no "on-Off" fluctuations. I want an explantion so I can prevent it from happening. Is a UPC the only solution?
View 5 Replies
View Related
Nov 8, 2012
I live outside US, which means, a power outage from time to time is normal, but when that happens in the middle of a crucial moment is very stressful. I went to the BIOS and turned on the option Restart After Power Failure, though it wasn't what I was looking for. Is there a way to set my Windows 7 to resume my last session (all the programs I was using) after power failure ?
View 4 Replies
View Related
Nov 13, 2012
my acer power doesn't deliver power to my pc. it accidentally fell dropped down. how should i fix it?
View 1 Replies
View Related
Dec 1, 2009
I recently upgraded from Vista to Windows 7. Ever since then I've been getting intermittant blue screens that say Driver_Power_State_Failure. This is annoying and Microsoft seems to have no answer. I have to restart then start over. All my drivers according to MS are up to date. Any answers?
View 8 Replies
View Related
Feb 13, 2011
I have a year old Windows 7 Acer Laptop. Has been performing fine, but have had a couple of Blue Screens in the past week, one of which was a "Driver Power State Failure".Have attached the minidump files to this message.
View 1 Replies
View Related
Sep 23, 2011
I just installed a new Plextor 128 gig SSD (which got great reviews on newegg) and did a fresh install of windows 7 onto it, and now I get a recurring BSOD that says DRIVER_POWER_STATE_FAILURE. I attached all the required files (I think).
View 1 Replies
View Related
Sep 23, 2012
I keep getting a BSOD "driver_power_state_failure" on my windows 7 64 bit homebrew PC. I have attached the minidump file. Does anyone have any idea which driver might be causing the BSOD?
View 7 Replies
View Related
Sep 14, 2011
I just received a computer I bought about a week ago, yesterday. Last night, while it was on and downloading files, the power board it was plugged into shut off. Now, it's stuck in an endless loop of failing to boot. It keeps asking me to insert the Windows 7 installation disc and restart. I put the disc in but it stays stuck in the loop and I am unable to do anything. I've managed to get it to go to the system repair setup, but it continued to try to repair the problems for over 6 hours and nothing has happened.
View 5 Replies
View Related
Sep 1, 2011
So about a month and a half ago I bought myself a new MSI Laptop, and in the past 3 weeks I've had 5 Driver Power State Failure (DPSF) BSOD's. I've searched around but I'm not confident enough when it comes to BSOD's to actually do anything without first getting some advice for my particular problem.All I have really been able to tell from this is that the error always occurs at the same location, ntoskrnl.exe (+7cc40), which, being a critical part of the OS, I assume is a very bad thing. [code]
View 3 Replies
View Related
Sep 20, 2011
I am getting these "driver power state failure" crashes with increasing frequency. I suspect it's a driver conflict involving my M-Audio Fast Track Ultra (music recording interface), which is connected via USB.My computer is an HP 671-340US notebook, bought in June or July 2010, with Windows 7 Home Premium (and a whole bunch of HP bloatware!) already installed. I have eliminated some of the HP crap because it constantly interrupted my work, and shut down my computer right in the middle of what I was doing, if I missed the message balloon. Don't know if that contriubuted to the problem. I updated all the drivers and Windows 7 yesterday and today. Crashed again this morning. No hardware upgrades; using it the way it came
View 2 Replies
View Related
Mar 8, 2012
I had Firefox, a bunch of Adobe programs (Flash, Photoshop, Illustrator, InDesign maybe) open. I was in firefox (which does freeze from time to time) and got the BSOD.
Win 7 X64 Retail, fresh install around December Everything is new as of last year except the Video card and hard drives (couple of WD Blue 500GB Raided, and some others for storage)
View 1 Replies
View Related
Apr 8, 2012
Have a Windows 7 PC working fine for 6 months, now fails to resume from sleep every time. On attempting to resume the PC appears to go through a powering up loop (Hard disk and fan spin up) which then goes off and repeats indefinitely till you force the power off by holding town power button.When changing 'allow hybrid sleep' in Power Settings to disable; it cured it for a few days. The issue came back, so tried enabling this setting - same result. Disabled again, same result.Update Intel Graphics Drivers to latest. Fixed the issue again, just for a few days.
View 1 Replies
View Related
Apr 11, 2012
I am having this BSOD since 14 days , my laptop HP dv6 6165 tx is new and a month old and i play games on it for almost 2-3 hours daily it has OEM windows 7 64 bit installed on it. I have attched the mini dump report files and the perform/report files in the attched file zip folder
View 9 Replies
View Related
May 12, 2012
Recently got a new computer (about 1 month ago) for our office and we keep getting the following BSOD almost daily:The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa80080d3060, 0xfffff80000b9c3d80xfffffa800994bac0). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 051012-14414-01. tried to analyze the mini dump files myself, but I can't seem to get them to open up.Not sure how to fix this issue and windows troubleshooting is uselessCurrently running: Windows 7 Professional x64 Sp1 OEM
View 1 Replies
View Related
May 14, 2012
My very recently purchased laptop was showing some problems from last 2 days. It would get stuck at the shutdown screen and then after extended span of time I had to press and hold power key to turn it off. It happened only twice. I had updated atleast one or the other thing before shutting it down...either through HP Support Assistant or Windows update.
Last night i ran Windows Update and tried to turn off my pc but since updates were being installed it said Windows will shut down once the updates are installed automatically...so i went to sleep only to find in the morning a BSOD. It was stuck on it again i had to turn off my pc by holding power button and then windows refused to boot beyond the Windows 7 logo black screen. But after a couple of retries it started.
Windows 7 Home Premium x64 OEM Age of the System- 6 days
View 1 Replies
View Related
