On an HP pavilion P4 3.0ghz 160gb hdd 1.5gb ram.While upgrading from Vista to Windows 7 i had a power failure. Now when i reboot power comes on fans turn, hard drive, DVD drive lights blind during POST. However, no response at all to the monitor, no beeps, no display nothing at all. Can't even get into the BIOS.
View 11 RepliesI was among the 1.4 million SDG&E customers that lost power on Sept 8, 2011. At around 10:30PM the power came back on and I attempted to boot up my Win 7 machine (which was on at the time of the outage). It gets through POST, displaying the list of auto detected devices, clears that screen to black and then displays a flashing white caret on the black background and gets stuck there.Any ideas on how to restore without re-installing Win 7 (and everything else)?
View 3 Replies View RelatedI live outside US, which means, a power outage from time to time is normal, but when that happens in the middle of a crucial moment is very stressful. I went to the BIOS and turned on the option Restart After Power Failure, though it wasn't what I was looking for. Is there a way to set my Windows 7 to resume my last session (all the programs I was using) after power failure ?
View 4 Replies View RelatedI keep getting a BSOD "driver_power_state_failure" on my windows 7 64 bit homebrew PC. I have attached the minidump file. Does anyone have any idea which driver might be causing the BSOD?
View 7 Replies View RelatedI just received a computer I bought about a week ago, yesterday. Last night, while it was on and downloading files, the power board it was plugged into shut off. Now, it's stuck in an endless loop of failing to boot. It keeps asking me to insert the Windows 7 installation disc and restart. I put the disc in but it stays stuck in the loop and I am unable to do anything. I've managed to get it to go to the system repair setup, but it continued to try to repair the problems for over 6 hours and nothing has happened.
View 5 Replies View RelatedI'm running Windows 7 and whenever I close my laptop my computer crashes and restarts. My settings are set to go to sleep mode when the lid is closed. I ran Blue Screen View and have a Driver Power State Failure. I also ran the SF Diagnostic Tool and attached the results.
View 8 Replies View RelatedOk, so I left my PC on last night while it was installing some Windows 7 (x64) updates, via Windows Update. I came back to it this morning at it looks like it had rebooted.I have the PC set for "install updates automatically" (the default setting) I believe this will reboot the PC at around 3am.1) Is there a way to check that the PC rebooted via Windows Update, as opposed to a power bump/outage?2) Would a power bump during Windows Update corrupt Windows 7 somehow? I checked Windows Update and it looks like there are no FAILED updates.
View 2 Replies View RelatedSo I keep getting the blue screen Power State Failure which I am sure you are all aware of. It's happening a lot to me, and it really needs to go away it's causing my computer to be incredibly slow.
View 12 Replies View RelatedI had 2 BSOD in recent weeks with the same error message on ntosknl.exe. I,m using Win 7 64bit. The dump file is attached. I,m using AMD X4 955 with 8G Ram, 1G HDD
View 1 Replies View RelatedThe operating system is 64 bit OEM. The computer is about nine months old (I got it at the end of June). I have not re-installed the operating system nor made any significant changes. Attached is the output from the "BSOD dump and system file collection" executable. I added the system health report to the same folder as the rest of the stuff, under the name "performanceanalysis.html". Let me know if you need any information that is absent from those files.
The BSOD usually occurs when the computer hibernates, restarts, or turns off. The computer will take an exceptionally long amount of time on the "turning off" screen, then the fan will start running loudly and the BSOD appears.
Windows 7 hang on shutting down and shows Driver Power failure error.My very recently purchased laptop hp dv6 was showing some problems. It would get stuck at the shutdown screen and then after extended span of time I had to press and hold power key to turn it off.It doesnt happen everytime i shut down but sometimes it stucks on Windows 7 shutting down screen and displays this error on blue screen after period of time.
View 9 Replies View RelatedI was updating my window suddenly it shut off due to power failure but problem is that now my computer is not booting and showing a fatal error. Now tell me what I have to do. I am using Acer Aspire (5738G) window 7 ultimate 32-bit.
View 1 Replies View RelatedI've been using Windows 7 since it went public, within the last 18 hours I got about 15 BS'sOD. I think the problem had something to do with the fact that I plugged my laptop into a power strip BEFORE turning the power strip on...idk. But whenever I plug in my laptop it takes about 30 seconds for a BSOD to show. I copied a couple down, here they are:
1. 0x0000008E(0xC0000005, 0x8BFAE3D1, 0x91C8DA94, 0x00000000)
2. IRQL_NOT_LESS_OR_EQUAL
0x00000000, 0x00000002, 0x00000001, 0x82C5DC91
3. 0x0000008E (0xC0000005, 0x8CBB63D1, 0x8BA84A94, 0x00000000)
KI1.sys - Address 8CBB63D1 base at 8Ca0900 Data Stamp 4911af5e
4. STOP: 0x0000008E ( 0xC0000005, 0x8BDB73D1, 0x8BB8FA94, 0x00000000 )
Kl1.sys - Address 8BDB73D1 base at 8BC0A000, Data Stamp 4911af5e
What I've tried:
Unplugging the power cord. Result: nothing happens but the battery drains so I eventually had to plug back in. Removing the battery. Result: I didn't get a BSOD for about 25 minutes. Using a different power source with battery. Result: Same as with original power source. Using a different power cord. Result: BSOD after 30-45 minutes. Plugging in computer when closed. Result: this works but I can't use the computer.... Currently I'm using 1, 4, and 5.
FYI: I posted a similar message on the Microsoft forum but all they told me was that it was a driver problem...I'd like to know is there anything I can do? and what those bug codes mean.
as stated in the thread title, whenever i play a Internet video on my pc, it powers off. originally i thought it was a problem with the browser or the flash plugin, but after doing some research, i found that it is caused by the video card. something is going wrong, to confirm this, i ran a stress test with atitool, this caused power failure, and then, in order to be absolutely sure i tried to play "team fortress 2" but it crashed at the menu. initial thoughts might be that it is overheating, which i will check, but i doubt that is the problem since i have a quite well ventilated full tower case.
View 1 Replies View Relatedsystem whet off and refused to power on, only to display a message telling me that it has encountered an Error
View 4 Replies View RelatedI've got the power cut while PC was running (w7). After rebooting I'm not able to connect to the internet anymore.In Device Manager, under Network Adapters there is a "Realtek PCIe GBE..." device properly installed.But under Other Devices there are now more entries with exclamation mark: - Network controllerMultimediacontroller - PCI Communication controllerI tried updating the drivers, then deleting and reinstalling but no success so far. Still can't connect to the internet.The browser can see the router, at 192.168.1.1I don't know where the problem is
View 5 Replies View Relatedhave been using my pc lately and iv been getting the driver power stat failure alot lately and what happens is my internet goes out and when I shut down it takes at least 5 minutes until it goes BSOD and the error message appears cll me how to fix it as soon as possible because this has been going on for a while and I want it to stop. So can anyone tell me step by step what to do so I can fix this issue and get on with using my pc
View 1 Replies View RelatedRecently, after a pretty heavy storm we had a power failure. At the time I was using an .exe program ...and I also had firefox operating. When I booted my computer up again neither program would function. I wasn't too bothered about firefox, but the other .exe program is pretty important as I need it for my job. Anyway, I managed to get the .exe program working again by opening it with the Compatibility Wizard and running it as if it was XP. (However it wouldn't permanently "save" in this mode, so had to go through the wizard everytime I had to use it).
Before I "found" the Compatibility Wizard solution, I restored the computer to before the power failure, but this didn't make any difference. Now I have had a second power failure. Once again with the .exe program open. And now it won't open at all, either with the wizard or without it. I reinstalled the program...and it still didn't work. (Although Firefox did when reinstalled). I have done a Registry Repair with RegSofts registry repair software....but still nothing. Now I am "a bit" stuck, to say the least !
I've been experiencing issues with my computer. It tends to blue screen and reads "Driver_POWER_STATE_FAILURE". I've tried to run some scans and diagnostics and even backed up my PC and then rebooted it with factory new settings, but it is still BSOD. I have a dump file, but I cannot post it because it says I do not have permission to open or attach it.
View 3 Replies View RelatedMSI S6000 running OEM windows 7 Home Premium 64 bit - 1.5 yearsIntel I5 4GB Ram unning IE 9
View 3 Replies View RelatedI periodically get a driver power state failure BSOD. It's happens about once a week or so.
View 4 Replies View RelatedBSOD Driver Power failure?
View 6 Replies View RelatedMy computer wouldn't start after a power failure during resizing partitions. I tried downloaded and used Repair Disk for Windows 7 64bit, which leads to the relevant screens but after a repeated restart of the system a note "...Interrupted operation: Insert the Recovery CD or other Recovery Media and reboot your PC..." still appears for already couple dozen restarts. I've purchased my Sony Vaio VPC23FX laptop with no additional disks and anything. Should I buy a new copy of Windows 4 Home Premium and start everything from a blank page or are there any other ways to make the computer start properly?
View 9 Replies View RelatedI get this bluescreen with a power driver state failure 0x0000009f. I just restarted my pc but then a week later i got the same message.
[code]...
I've got the power cut while PC was running (w7). After rebooting I'm not able to connect to the internet anymore.
In Device Manager, under Network Adapters there is a "Realtek PCIe GBE..." device properly installed. But under Other Devices there are now more entries with exclamation mark:
- Network controller
- Multimedia controller
- PCI Communication controller
I tried updating the drivers, then deleting and reinstalling but no success so far. Still can't connect to the internet. The browser can see the router, at 192.168.1.1 I don't know where the problem is.
Why doesn't my computer boot up after power failure? The bios is set to boot after power failure. I have to jump start the motherboard to get it to boot. What causes this to happen? Is it a power surge? I can unplug and plug the computer back in and have no problem booting. If I have a power failure, no Boot. The last power failure was a sudden off no "on-Off" fluctuations. I want an explantion so I can prevent it from happening. Is a UPC the only solution?
View 5 Replies View Relatedmy acer power doesn't deliver power to my pc. it accidentally fell dropped down. how should i fix it?
View 1 Replies View RelatedI recently upgraded from Vista to Windows 7. Ever since then I've been getting intermittant blue screens that say Driver_Power_State_Failure. This is annoying and Microsoft seems to have no answer. I have to restart then start over. All my drivers according to MS are up to date. Any answers?
View 8 Replies View RelatedI recently have been getting blue shutdown screens on my laptop. I will give you plenty of information about my computer. I put all the information about the Blue screen dump files and my System Information file in an attachment. I hope this helps. I recently found out you could save the System Information file as a text and also as an .exe. This is how it happens, I will be using my computer and then the computer will become very slow and unresponsive. It is not completely unresponsive but it will be so slow that I cannot use it, then after about 3 minutes of this slow unresponsiveness the blue screen will show up and say driver power state failure and shutdown. I recently formatted the computer because it had been doing this before so I restored it back to factory defaults about one month ago.
View 8 Replies View RelatedI have a year old Windows 7 Acer Laptop. Has been performing fine, but have had a couple of Blue Screens in the past week, one of which was a "Driver Power State Failure".Have attached the minidump files to this message.
View 1 Replies View RelatedI just installed a new Plextor 128 gig SSD (which got great reviews on newegg) and did a fresh install of windows 7 onto it, and now I get a recurring BSOD that says DRIVER_POWER_STATE_FAILURE. I attached all the required files (I think).
View 1 Replies View Related