i have window star up repair prb .after i changing the processor number and maximum memory setting at system configuration.it keep pop out when i start my laptop,i cant access the window now,and i cant press the F8 oso,it hv nothing when i press it.
View 2 Replies
My mates Maxtor 60GB HDD is showing an Error Code of:"0200 Failure Fixed Disk 0" press F1 to Resume press F2 to enter setup.
View 2 Replies View RelatedTried installing using flash drive and Dvd but same error both times. Used the image last week and all went fine. I have created a new partition on an existing 500gb seagate hardrive which I would like to install windows on. This partition E: is 100GB and the other partition G: has all my media and software etc. Do I have to change the partition I want Windows on to C:?
View 3 Replies View RelatedIm having an acer aspire m5811. Everything works good. but my pc shuts down when i press restart. It doesnt reboot automatically as its supposed to when I press restart.
View 3 Replies View Related(Fresh installed Win7 Ultimate 64bit)I used Aero Peek a couple of times earlier without any problem while multi-tasking. and after 15 minutes, this sh*t starts to happen!When I press the Windows Button on my keyboard, my computer shuts down! I thought earlier that I just pressed it and clicked or highlighted the "shutdown" button on the start menu. But I have tried it a dozen times, that when I press the Windows Button,?In fact this is the second time that I am posting this thread because I accidentally pressed the d*mn Windows Button again.
View 3 Replies View RelatedWhen pc start show ,press f1 to continue del to enter setup. how to remove this option.
View 1 Replies View RelatedI have a windows 7 hp laptop model dv6000 and I want to check all my hardware components through the BIOS. I know that the key is f2, but whats the best time to hit this key..........
View 5 Replies View RelatedI am using Lenovo Ideapad g460 windows 7 home premium. From last 3 days it just hangs without showing any error, most of the time the screen is black with all the lights on. I try to press ctrl+alt+del but nothing works not a single key except the power button works.
I have check my even viewer only one error I have found most of the time this error is there Event ID 7026 with following details The following boot-start or system-start driver(s) failed to load: TPPWRIF. I have tried to find this file TPPWRIF in my system but its not there. I was using preinstalled Mcafee AV but now I am using BitDefender (paid) AV. I am also using IObit Security 360.
I have been getting problems when booting. Whenever I boot the windows startup animation stops until I press enter. Then it spots again for a couple minutes until I press enter. I tried clean boot and safe mode which did not help.
View 8 Replies View Related"A disk read error occurred press ctrl alt del to restart windows 7" Above statement is the problem in my system.This appears when the system is booting. How can i repair my system?
View 2 Replies View RelatedA disk read error occurred press ctrl alt dell to restart windows 7
View 2 Replies View RelatedWhen my pc trys to reboot it tries to install a windows update but it sits and you think its installing but its not. If the pc need to reboot it fails at the bios screen and you have to power off. Then you get a windows saying that windows could not restart and to press F1 to continue but the reason for the reboot has not been done.
View 8 Replies View RelatedAfter switching on computer win7 x32 receive the error RPLUD is compressed. Press CTRL+ALT+DEL to restart After switching on your computer received the error RPLUD is compressed. Press CTRL+ALT+DEL to restart on a black screen with white writing when trying to boot into Windows.Also tried to system restore by inserting win 7 disk but its also not happening.I keep getting the following from all the restore points I try."System Restore did not complete successfully. Your computer�s system files and settings were no changed.
Details:System Restore failed to extract the file (C:) from the restore point. An unspecified error occurred during System Restore. (0x8000ffff)You can try System Restore again and choose a different restore point. If you continue to see this error, you can try an advanced recovery method. For more information, see What is Recovery?"
my computer desktop cant show the word press any key to boot from CD. it start it self then it cant find the disk
View 4 Replies View RelatedSo I built a new system, and created a bootable USB with Win7 on it, I've tested it on my previous comp to make sure it is bootable.I plug it into my USB slot (tried both USB 2 and 3 slots) and set the bios (F15) to boot from what it reads as a Generic Storage Device 0204.I reboot and then see "Press any key to boot from USB..." <-- 3 dots which immediately (<1sec) changes to 4 dots. And then the system hangs. Num and CAPS are both lit up, and cannot be turned off. Nothing else does anything.While I'm in the BIOS, the keyboard functions just fine. It's a USB keyboard plugged into a USB 2.0 slot (but also didnt work when plugged into a USB 3)
View 3 Replies View RelatedI have one PC running Vista (home basic), one running XP (professional) and one running Windows 7 (home basic). There is a printer connected to the Vista box, which is shared.
On the XP box I can both see and use the printer on the Vista box (i.e. a "net view \vistabox" shows the printer, and under "printers and faxes" I can install and use it).
On the Windows 7 box, however, I can see the Vista box (i.e. a "net view" shows it in the list of available PCs on the network) but a "net view \vistabox" gives me an "access denied" error.
The Windows 7 machine has a password on it, the Vista and XP machines don't. All machines are on the same workgroup name (which is "WORKGROUP"). On the XP box I don't need a password to access the shared printer on the Vista machine; it just works.
Extensive Googling has failed to render enlightenment, nor has browsing this forum. I'm sure it has something to do with security and passwords, somewhere, somehow, but I have no idea in which direction to look for it, let alone fix it. I have also read some things about workgroups and homegroups not being the same in Windows 7, but I'm not sure if this is correct (and if so, relevant).
I have an Alienware M14x R1 laptop with a Crucial M4 SSD as my primary drive and the stock Seagate in the optical drive as my secondary drive. I recently tried to update the Seagate's firmware and now everytime I boot up I get this message that says, "Non-system disk press any key to continue". What do I do to fix this?
View 9 Replies View Relatedfor some reason my windows tab on my keyboard which is situated next to my ctrl key is not working when i press it. It should bring up the start menu list for my programs and when i hit it nothing happens.
View 7 Replies View Relatedmy friend is having problems with the keypad on laptop , everytime she presses a key it repeats its self also the when pressing spacebar she gets a dot , any help would be great, she thinks her little boy was pressing all the keys
View 1 Replies View RelatedDuring my usual morning start-up, I got a dos screen with a message and to press F1 to continue. Everything booted fine after that. I ran malwarebytes, backed up my data files on a flash drive and looked into the event logs to see what might have happened.Unfortunately, I didn't even know where to look in the event logs except the administrative events which showed nothing critical.
View 1 Replies View RelatedI installed clean via USB flash this morning, Win 7 Ultimate.
Expanding files was stuck at 0% for a few minutes. So, I unplugged a single USB device and install proceeded. All readers take note of this SF learned 'fix'.
That is when I noticed that my DVD drive was spinning. I had neglected to remove the DVD after copying it to the thumb. I ejected the drive and the install interrupted.
Even though I specifically selected to boot from the thumb (via F8), I was indeed installing from the DVD. I did not recv the standard 'Press Any Key To Boot From CD/DVD'.
I am not willing to perform any tests on this at this time. A new clean install is likely in my near future as I continue to test VMs and other apps. But, I am curious. I will assume that I did not deviate from the process described above. I was neither tired nor stoned. I specifically selected to boot from the thumb.
Did Windows install see the DVD and make a jump from the thumb to the ODD?
when i press F1.2.3.4. the functions like brightness/dull/mute,etc occur. whereas if i want to use shortcuts for F1,2,3 (like spell check in excel for shift +F7), i need to use fn key+F1/2/3. can i inter replace this function?
View 5 Replies View Relatedwhen i put the cd of window 7 in cd rom there is no message to press any key to boot cd
View 3 Replies View RelatedMy Asus Laptop needs to press F1 during booth every Time, there is no message to press F1, during booth the screens stops on Asus screen, Black and White, then to continue booth i always need to press F1, I already set Bios to default but the problem still occur!
View 4 Replies View RelatedI try to install Windows 7 on my system, but when i insert the dvd with the .ISO of windows 7 64-bit into my drive, i select boot from my DVD drive on start up, and the screen goes black, but nothing happens, and it starts my Windows XP.
Oh, and ive also re-burned the .ISO at the lowest speed, multiple times. No luck.
I am attempting to access an application.exe file on my desktop. Each time that I click on it the Windows message, "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." pops up. I am the system administrator so this should NOT be a problem but apparently many out there are dealing with this as well. I can delete, move and even copy the file but I cannot run it. There is no option for override with password or grant permission. It just says that I cannot run it. Also, the system I am running is Windows 7 Ultimate x64.
View 8 Replies View RelatedGot my computer back from having its PSU fixed, and this is happening.When I press the power button, it powers on for a second, then off, then back on again automatically and actually stays on this time. It does this every time.
View 3 Replies View RelatedThis morning, Windows installed 5 updates, which I had postponed from yesterday. It told me to reboot but when it did, it got stuck at the Press ESC point. There was no disk activity. I turned off and rebooted again several times with the Windows Repair disk in the DVD drive. I was able to run the startup test but it said it couldn't repair it. The log said the the fault was caused by a critical update. I went into System Restore, but I am unsure of the options. It showed a screen with all my partitions already ticked, including the Windows boot partition which was greyed out. Am I supposed to leave all the partitions ticked, or if I don't, will I then lose those partitions?
I currently have the Wondershare LiveBoot 2012 DVD running but I'm not sure what option I need to use. Recover MBR, Recover Boot Sector, or Recover Boot files, or all of them?
I have a raid (stripe) hard drive and it was working fine and i turned on my pc and it states floppy disk fail and when i press f1 it states boot up failure.I have tried all the recovery options and system recovery takes forever and does nothing and it does not even have my drive listed in the option box in system recovery so i dont know what to do i don't wanna loose my data.
View 6 Replies View RelatedI was randomly playing a game, then all of a sudden my keyboard started typing weirdly. Eg. when i type a, e appears and when i type e, L appears. I went on control panel and the keyboard was still set to "English (United States) - US" and the language was still set to English. I tried pressing Ctrl + Shift and that didn't help either, no matter how many times i pressed it.
View 4 Replies View RelatedI have ASUS PC (model: P5MG-ZX). I want to install windows 7. How to make a proper boot setup. I tried many times but failed to set my boot setup. I tried to install windows through USB but pc starts normally. It's not showing me the option "press any key to boot from CD/DVD".
View 8 Replies View Related
