Attach A "note" To An Application For Display Before Use?
Sep 20, 2012
I am trying to figure out a way to make it so that I can attach a note, whether it be a text file, or a pop-up box that the user must respond to, upon opening an application, such as Easy File Locker. The purpose of this would be to supply a brief instruction before the user uses the application. I don't know if there is a third party software out there that can do this or if I can do it somehow without any new software. Again, it would work in such a way that the not would be shown upon opening the application that it is attached to normally, just so that there could be some instruction before use.
I know about the ability to attach a note in the right click context menu when right clicking the application, but I need something that works like when you open the application the note is opened and shown on the screen before the application itself opens. Here are my specs:[CODE]
Another index/search problem that I just can't seem to stop, ...and that is the indexing of Microsoft 2007 "Onenote". I've already searched for threads/and read many tutorials on this issue of the indexing & search and read many from Shawn (Brink) and they work for most objects when de-selected in control panel / index options, but with "OneNote", this stubborn sob, will keep adding itself back to the index once its opened the next time. When in the control panel/index options, their its sits all by itself. Its always listed by itself and is not buried in the users folders where the onenote directories & backup's are. When I un-tick "OneNote" in Ctrl panel / Index Options and then select rebuild, it remains unlisted, as its not even seen anymore in the list. But once I open "OneNote", and go to index options, sure enough its listed and checked again, and is being indexed. I've tried going into Local group policy editor "Search" and tried removing by the path to the OneNote Folders and Files. It was done so by path.
I have a PB Easy Note MX, unfortunately I do not know if it is M36, M37 or M52 because the sticker is gone! I boughyt it about 4 years ago. How do I know which sound driver to download? I have recently installed Windows 7.
I have a PB Easy Note MX, unfortunately I do not know if it is M36, M37 or M52 because the sticker is gone! I boughyt it about 4 years ago. How do I know which sound driver to download? I have recently installed Windows 7.
Our office has an old program that we still need to use when upgrading our PC's to Windows 7. The program will run fine if you start a windows virtual PC and install and run it. However, based on the needs of our office, I need to be able to run Windows XP mode and simply have an icon for our users to click to take them to the application.If I install the program in windows XP mode, and then add a shortcut to the file under all users/start menu, a shortcut is placed in the appropriate place on the windows 7 machine and I can copy that shortcut ot the desktop. The program runs fine until you restart the computer. Once you restart the computer and double click the link on the windows 7 desktop to the program running in windows XP mode, it says:
Cannot start virtual application. The application is blocked from running as a virtual application.
I read some other posts saying to put a new shortcut in the all users/start menu folder. This works, but only until our users restart their computer. The next time the computer is up, the problem happens again. This is not an acceptable solution to have to create a new shortcut for each workstation each time the computer is restarted.
There are a few things MS seem to be missing the point on in Windows 7. One is the ability to quickly stick a note on the desktop by right-clicking and going to "New->Sticky Note". I remember adding something to the "New" menu in XP some time back so I'm wondering if there's a way to do this.
i have installed ms office 2007. and i m using the one note there. i want to ask you that which type of data stored in one note back up files. means that is it stores all the information like cut copy paste or audio video data?
The error states:explorer.exe - application error The application was unable to start correctly (0xc0000022). Click OK to close the application.When I click OK, i just have a black screen. I can get the task manager going by hitting control, alt, delete. I've tried to start explorer.exe from the file menu, but get the same error.
The application failed to initialize properly (0xc0000142) Click on OK to terminate the application.The only option is to click ok. I am deathly afraid to turn off my computer because my brother recently did and that caused it to freeze at the blue HP startup screen, but thats another thread. I get this error whenever I launch anything. I can't even open up the task manager. I really need help. I don't currently have a way to back up my stuff either but I am working on it. By the way, I don't know that my brother was having the same error message as i was or if he was having any error messages. I use zone alarm full security suite if that helps at all, I don't know if it deleted a registry file or something.
I tried to replace 3 files in the system 32 folder, and must have made a mistake along the way leaving my laptop inaccessible once logged on. The three files were:
uxtheme.dll themeui.dll themeservice.dll
I received these error messaged when logged on:dwm.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.explorer.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.Can system restore revert back the files so it was like i never attempted the patch?
I don't what happened but all of a sudden a message box opens up on my windows 7 laptop and it says this " the application was unable to start correctly (0xc0000142). Click OK to close the application" . I clicked ok but the error message box keeps returning back.If i remember properly, this happened when I tried installing some wallpaper.system seems to be working finw with all applications, but this message box is quite annoying.
In the past when I wanted to attach a photo to an email I would browse the desktop for the folder that I wanted. Now for some reason I cannot access the desktop. When I browse I get the download folder. On the area on the left of the download folder specifies document, drives and my external drive. How can I correct this?
And now I am so screwed. I can't even open services.msc, I can't install an update, I can't run updates and I can't re enable anything because I can't get into services to do it. Please don't say system restore because I disabled it.
I have Windows 7 Professional installed on my 13" Macbook pro, I went to attach a VHD, but the option was greyed out, it won't let me create one either?
System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Professional , 32 bit Processor: Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz, x64 Family 6 Model 42 Stepping 7 Processor Count: 4 RAM: 2217 Mb Graphics Card: Intel(R) HD Graphics Family, 916 Mb Hard Drives: C: Total - 89847 MB, Free - 46839 MB; E: Total - 200137 MB, Free - 183100 MB; Motherboard: Apple Inc., Mac-94245B3640C91C81, MacBookPro8,1, C02129400KHDRKQA7 Antivirus: avast! Antivirus, Updated and Enabled
I have an NEC Superscript 870 that does not have Windows 7 drivers. Is it at all possible to run a printer in WXP compatibility mode as we can run programs in WXP compatibility mode??? Sure would not only save a few (very dear) dollars, but also prevent idiotic waste of a perfectly good asset (where is all of their "think green" money where their mouths are???). I am intentionally not upgrading one computer to Windows 7 just so I can copy docs over to the WXP computer and bring them up on it so I can print them.
I know, I know, I know... SATA is Hot PnP. I'm old school and finally gotten over the fear of Hot PnP USB.
I'm replacing a new Windows 7 PC for a customer and the old PC is WXP. Reason being, the old PC Pwr Supply died. Can I take the old SATA HD w/WXP on it and just plug it into a SATA port on the new PC while it's running to copy files from it (safely).
And can I facilitate a Files and Settings Transfer WXP-to-Windows 7 in this manner?
I am upgrading my HTPC that i put together a few years back to have a SSD as a boot drive to increase space, quiet background running and speed up booting, etc.Everything was running fine before trying to exchange the raptor for the m4. I had a big issue getting Windows installed on m4 but finally did a clean install when no harddrive was connected except the SSD to the original SATA port of the boot drive. Once I had windows installed, and i was able to boot up with only the SSD attached to the boot SATA port, I attached the 3 storage drives to their original SATA ports and got an error when booting... it paused in mid boot, then started searching for a boot disk in the DVD drive. I looked at the BIOS and the SSD is listed as 1st (port0) on hard drive boot order and hard drive is 1st boot priority. I unplugged all 3 storage drives and it booted up without an issue
I'm trying to attach a sound file to a photo so I can play it on my digital picture frame. I am also trying to make it so when I click on the photo file it will automatically trigger the sound file to play.
I have Win 7 Professional x64, and whenever I attach a USB device (my mp3 player, to update its firmware), it installs the drivers needed, then after about 30 seconds automatically detaches (that is, it is shared and auto-reattaches to Windows 7). I have uninstalled and then reinstalled XP mode, uninstalled and reinstalled the Virtualization drivers, and tried using different USB ports. how to make it stay attached until XP Mode is hibernated?
I run Win 7 64 bit with Virtual XP. I loaded HP 5400C software into Virtual XP. I attached Scanner and was able to scan/print and scan/pdf. ie everything worked as it should. A week later Virtual XP requested I run 7 updates. Since 7 updates the Virtual XP sees the scanner. When I request "attach" it goes ding dong. When I check again the wording does not change to "release" I think the problem lies with the recent updating. The scanner software reports the scanner can't be found.
