Add A PATA HDD To Running PC?
Jul 3, 2012
I added PATA HDD to my desktop which has 3 SATA HDD's & 1 DVD Writer with dual boot options of WinXP & Win7. After adding the PATA HDD on the IDE slot & start up, it appears in BIOS, but after start up read/write operations on the PATA HDD is not possible. How do I correct this in WinXP OS, since it does not even register, but in Win 7, it Shows up in BIOS & in My Computer window, but read/cut/write operations on the PATA HDD is not possible. However it can copy data from PATA HDD.??
View 6 Replies
ADVERTISEMENT
Nov 21, 2011
WinFast ATA66 PATA PCI controller with popular CMD648 chip. Win7, both x64 & x86 recognize the controller properly. The controller is connected with optical drive working normally in UDMA-2 mode. Unfortunately, the transfer is possible in PIO-4 mode only. How to set the higher modes of data transfer? The drivers for Win7 aren't available on the manufacturer's www page.
View 2 Replies
View Related
Mar 3, 2011
I've already ordered a new drive to replace my Samsung PATA, because the last time that I tried to use it, it made a peculiar buzzing noise for several seconds as it spun up, and when I removed the disc, I found two circular scratches very near the hub. The only thing that I can think of that would cause these would be the lens coming into contact with the disc, which I doubt that there is anything that can be done about .However, since I'm one of those people that finds it difficult to just toss things into the dumpster, I'm wondering if there is any practical means to remedy it's ills? Even if there was, I would only keep it as a spare, because I dislike it's performance compared to a SATA.
View 4 Replies
View Related
Mar 11, 2012
Well, i ve had the XP for quite some time and got the trial win 7 version installed.The XP is on a PATA drive. The 7 is on a new SSD OCZ drive. Windows 7 boots everytime (after i manually select it) when the PATA is connected. Once i remove the PATA, change the boot order from it to the SSD - NTLDR Missing. I want to remove the PATA drive from my system but it wont load the 7 without the XP
View 3 Replies
View Related
Aug 12, 2012
ive been getting BSODs and finally figured out how to debug it with WinDbg (x86) and set the symbols for windows but i cant read the text. ive tried reinstalling my GPU and Java but no luck. when i try to run intel driver update utility as soon as i run it i get a BSOD ive got the minidump here if anyone knows how to read it, so here you go.
Microsoft (R) Windows Debugger Version 6.2.8400.0 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:UserskalyeDesktop�81212-36504-01.dmp]
[Code].....
View 9 Replies
View Related
Nov 1, 2011
I'm just installed windows 7 on my 2009 imac through bootcamp. However there are some problems. Ive noticed when i try to play something on windows media player it will tell me that my computer is running low on memory and to close some windows. Also games run poorly if at all. I suspect its a driver issue but have gone through all the auto updates etc.
View 4 Replies
View Related
Jan 29, 2012
As I shutdown/restart my laptop, I notice it switches to a secondary desktop that has been running programs.A good example would be trying to open my Task Manager, I can Ctrl-Alt-Del and it will allow me to open Task Manager - however when I click on Task Manager, it opens on the Desktop running in the background. I can't even access the Desktop in the background, it only shows up as I'm shutting down - closing programs that I tried opening awhile ago.
View 7 Replies
View Related
Oct 9, 2012
I am running into this issue of having complete access to one PC running windows 7 from another one that is also running windows 7. One of the PC's is a windows 7 pro 32 bit and the other is window 7 ultimate 64 bit. I have had them setup with public and dedicated folder sharing. But from time to time I find that a file I want to get off one or the other was not saved to a shared folder. I have been looking for a way to allow complete access from one PC to other one (going both directions). I use 2 PC all the times and it really depends on where I am in the house as to what one I am using as one is laptop and the other is a desktop. They are both on the same network. It is just one of the strange things that I have not been able to find a way to get complete file access without the use of software like Teamviewer or others like it.What I would like to do it just go to the network location in the windows explore to get the files I want from the other PC.
View 5 Replies
View Related
May 31, 2011
When I logged on to my windows 7 computer it was slow and then I noticed that the clock and date were wrong. I opened the task manager and found that the cpu was running at 100%. After using bleepingcompter website to find that there was a malware I also went through the startup menu and removed unwanted items. I also uninstalled Itunes which was the last program installed on compter. Right now I have malware software called Malwarebytes. I am doing a full scan its been running for and hour and a half. I just checked and the cpu is still running at 100%. The only thing I did not remove was the lastest windows updates.
View 3 Replies
View Related
Jun 30, 2011
So past week had this odd problem with my mouse pointer. It will sometimes glitch/lag on my desktop screen while I am moving it. Similar to like when you are playing an online game and you experience lag and bounce forward several spots or something like that. Resources are available and cpu is not running high under load. Checked drivers and they are up to date.
View 9 Replies
View Related
Mar 5, 2012
My son's Acer laptop seems to be running at 100% all the time. When I check Resource Monitor, spool service seems to be the culprit. It runs all of the time?
View 5 Replies
View Related
Apr 26, 2009
Several times I've installed Windows 7 and always had the same problem of the CPU running Hot. Has anyone come across this problem? If so, any tips.
View 5 Replies
View Related
Mar 4, 2012
My cpu usually run around 30%My PSU recently died and I replaced it with a larger one.I cleared my cmos when I mistook it for the power button (no idea what it does).after putting in the new psu my cpu runs at 80-100%.my resource monitor puts my browser at 50-60% and everything else >5When I close my browser and open any demanding program (games) my cpu will spike and stay at 100%.
View 3 Replies
View Related
Sep 14, 2011
Yesterday, I installed Foxit Reader, then decided I didn't like it. When I attempted to re-install, I received the error message that "the windows installer service could not be accessed." It was listed as running in the services applet of administrator tools, but would not work.While then exploring the system, I found other things that wouldn't work--for example, audio, which is what put me on to the same problem last May--and others. I got many "class not registered" errors. SFC won't run. When booting to the CD and running SFC, I got the old message about a pending repair, although I can find no trace of one. Ran malware scanners, of course, and the system came clean. Clean boot was not useful.The most significant thing I have found, which is probably at the root of this, is that in task manager, there are no instances of svchost running, unlike the usual ten or fifteen that normally run.I had this problem in May, and ended up doing a complete re-install of Windows 7 Home Premium. I would like to avoid going through that again. It's difficult with visual impairment. There is one potential similarity to now and the situaton in May, other than the symptoms described above. In May, I had tried installing a new nvidia card, which Windows wouldn't recognize, so I took it out and when I booted back to Windows, the above symptoms appeared. Yesterday, I saw in event viewer a dcom error, which traces back to the nvidia updatus "user."
View 3 Replies
View Related
Apr 20, 2011
I have an Acer 5810tz running windows 7 home premium, my computer just started running very slow. I have ran an indepth scan with Mcafee and no issues were detected. The computer constantly runs at 100 %.
View 3 Replies
View Related
Sep 16, 2011
Recently, I installed Foxit Reader, then decided I didn't like it. When I attempted to re-install, I received the error message that "the windows installer service could not be accessed." It was listed as running in the services applet of administrator tools, but would not work.While then exploring the system, I found other things that wouldn't work--for example, audio, which is what put me on to the same problem last May--and others. I got many "class not registered" errors. SFC won't run. When booting to the CD and running SFC, I got the old message about a pending repair, although I can find no trace of one. Ran malware scanners, of course, and the system came clean. Defragged, did scandisk. Clean boot was not useful. Trying to do a repair in place results in the error message that setup can't find any information about the discs on the system.
The most significant thing I have found, which is probably at the root of this, is that in task manager, there are no instances of svchost running, unlike the usual ten or fifteen that normally run. In the services list, some services say they are running, but aren't. Windows audio is an example.I had this problem in May, and ended up doing a complete re-install of Windows 7 Home Premium. I would like to avoid going through that again. It's difficult with visual impairment
View 2 Replies
View Related
Nov 13, 2011
I have a HP Pavilion dv6 laptop that is running on Windows 7 and is a little over 2 years old. Often it, for no good reason, starts to run at 100% CPU and makes doing anything impossible.
View 12 Replies
View Related
Nov 21, 2010
Can I run Aoe on windows 7 and how?
View 4 Replies
View Related
Oct 11, 2012
I was backing up to an external Seagate hard drive and got the BSOD. When Windows restarted it shows the backup is running even though it is not. Nothing I do has any effect. According to the Task Manager Backup is not running. Rebooting doesn�t help. I am running Win 7 Ultimate (64) on an ASUS computer, 8 Gb ram, AMD Athlon II X2 2.80 GHz processor. This is not the first time I have been backing up to this external drive for about 6 months and I have had no problems.
View 9 Replies
View Related
Feb 14, 2013
I had a virus a few weeks ago and had to do a system restore. Don't know if my problems started than but I know I have them now. My IE 9 (64bit) running on Windows 7 does not show any Javascripts. The Javascripts tag is enabled in the security option and I do see the Javascript with both Chrome and FF, but not IE 9. Also, when I go to IE 9's about box there is no version, cyper strenth or product ID. I tried to reinstall the program, but could not because I would get an error notice that a new version of IE is already installed. I also tried to install IE 10, but it would not install and messed up my IE9 to the point that I had to do a system restore again. I have been searching the web without too much luck.
View 5 Replies
View Related
May 31, 2012
I've been getting some nasty BSOD lately. I've gotten them randomly for months every week or so, but now I can't go a few hours without it crashing.I can just turn on the computer and walk away and get a BSOD.Here are my details and attached are my zipped files.System is a 2 year old ASUS G73JH Laptop,Windows 7 Professional,Full retail version,Reinstalled OS yetserday hoping to fix these BSOD,Reinstalled all my drivers fresh off the ASUS website for my laptop,Updated the OS with all current patches,The one driver I couldn't get to load was for Microsoft Virtual WiFi Miniport Adapter. And even if I disable it, I still get BSOD. I also tried uninstalling it and reinstalling it.
View 9 Replies
View Related
Mar 27, 2012
I am trying to run a USB microscope on my work laptop (Win 7 Enterprise SP1, 32bit, Core i5). As I am not an administrator I am having trouble getting it working
The microscope (Veho VMS-004) requires its own drivers and program to operate. I have solved the latter by running the program from a U3 memory stick, but I still need to find a way of installing/running the drivers. Can the drivers be run in the same way, and if not is there?
(And yes I know that I am not strictly supposed to be using non-approved drivers/programs on a work laptop, but the approval process takes months to complete.)
View 9 Replies
View Related
Dec 6, 2012
Been trying to play Zoo Tycoon 2 for a while, I've uninstalled and installed many times, installed new updates, run at different compatibility and as administrator but still get the same problem of it doing nothing. What happens is that start it up, changes to windows basic then nothing happens but when I go into task manager it shows Zoo Tycoon 2 Executable is running when its really not.
View 2 Replies
View Related
Nov 20, 2009
I recently bought the Bioshock PC-DVD despite having some worries about compatibility, and I've just completed it without having any issues. Unfortunately I still can't install the 1.1 patch, and there's a bit of sound crackle at the loading screen, but hopefully there should be no problems that affect your experience with this configuration. I've heard Steam copies work without problems anyway, but this may not work as it did with my hard copy.
I'm using Windows 7 x64bit, build 7100. Hopefully hardware info is in my profile.
Part 1: Right-click the Bioshock.exe icon and click 'Properties'.
Select the 'Compatibility' tab, and check the box which says "Run this program in compatibility mode for:", then select 'Windows XP (Service Pack 2)' from the drop-down menu.
Part 2: Download Game Booster, install, run, then click "Switch to Gaming Mode!".
A dialogue box will pop-up asking if you want to close other applications. It's up to you what you close, but I'd advise closing them all.
This program temporarily stops all unnecessary processes to maximise free RAM and processing power. It happens to disable all of the fancy Windows effects which I've heard is the main cause of issues with running the game. Don't worry, once you're done playing you can restore all of the closed processes by clicking the 'normal mode' button.
Make sure you save any important documents before running the program, as it won't restore these.
Part 3: Right click on your Bioshock.exe icon again, and select "Run as administrator'.
Part 4: Be nice to the little sisters.
I've read that making sure the Bioshock folder isn't set to 'Read Only' is important, though I've not had any problems with this option still checked.
I know everything but the Game Booster step is pretty much common knowledge, but I thought I might as well go through it all.
View 1 Replies
View Related
Sep 6, 2010
I've done this before, but can't remember how to now. I have a folder which contains the contents of a CD. I'd like to run this cd without actually burning this img to a cd. I know there's away to use magiciso to run the files as if from a cd without requiring burning the image.
View 9 Replies
View Related
Dec 20, 2010
how well windows 7 running on 1 gb ram laptop / rig ?
View 9 Replies
View Related
Feb 9, 2011
I have a Toshiba Satellite Laptop that keeps giving me a message stating "The following programs are still running...." My issue is the list of programs is empty. So, if nothing is running why am I getting this message?I just need to figure out how to get my computer to shut down without having to go through all the annoyance of having to keep sitting at my computer once I tell it to shut down.
View 5 Replies
View Related
Sep 14, 2011
Yesterday, I installed Foxit Reader, then decided I didn't like it. When I attempted to re-install, I received the error message that "the windows installer service could not be accessed." It was listed as running in the services applet of administrator tools, but would not work.While then exploring the system, I found other things that wouldn't work--for example, audio, which is what put me on to the same problem last May--and others. I got many "class not registered" errors. SFC won't run. When booting to the CD and running SFC, I got the old message about a pending repair, although I can find no trace of one. Ran malware scanners, of course, and the system came clean. Clean boot was not useful.The most significant thing I have found, which is probably at the root of this, is that in task manager, there are no instances of svchost running, unlike the usual ten or fifteen that normally run.I had this problem in May, and ended up doing a complete re-install of Windows 7 Home Premium. I would like to avoid going through that again. It's difficult with visual impairment.
View 3 Replies
View Related
Oct 31, 2011
Is this program always supposed to be running?Ive read it's supposed to go away after awhile but it has yet to do so.
View 4 Replies
View Related
Aug 6, 2012
i recently had my hard drive fail and im in need of a new one the one i have is raid 0 500gb hd and i need some prices on what i need to get a new one along with how to set up bios and a new os. i have a windows 7 upgrade disk and a restore disk if that helps.
View 1 Replies
View Related
Oct 24, 2009
Can I run 64-bit Windows 7 with only 1.5 GB of RAM? The minimum system specs on Microsoft's website are 2 GB for 64-bit, but I'm not sure if that's recommended or required. I'm getting Windows 7 Professional upgrade for $30 USD, so I want to know if I can use 64-bit vs 32-bit.
I already know that none of the printers I have work with Windows 7, but that's fine. All my other hardware is covered.
View 9 Replies
View Related
