I apologize in advance if a thread related to this has already happened. Judging from my join date, I'm obviously new to these forums, a friend of mine recommended this to me, so I'm hoping someone here can help me figure out this problem.That problem being, I recently just wiped out my Windows 7 Basic edition due to some problems it was having and I recently just installed Windows 7 Ultimate (Wireless LAN_ Realtek_ 8.0. 0.238_W7x86W7x64_EM108). Now from my judgment with computers when I want to connect to a router, in the bottom right hand corner you could do as so and connect right away. Well, I can't do that. Right now I'm connected through my Ethernet cord and I'm trying to figure out this issue.
I went to my manufacturer website (I have a Gateway zx4800) and I recently downloaded the driver I needed (also x64bit) and I have set-up and installed what I needed to do and I even restarted, and still nothing. I even tried to set-up a wireless connection myself and it told me to wait 90 seconds, but nothing showed up for me to sent anything up, so my mind is just completely boggled.
I've been having intermittent disconnection issues with my wireless card, DWA-552. After having thoroughly researched on the subject, the conclusion drawn by many people is that dlink's drivers are inappropriate for the card. It was suggested to install the Atheros driver instead, which i proceeded to do. Much to my confusion, when i downloaded the AR5008 10.0.0.75 driver, i found no .exe file to easily setup the driver.
Installing Huawei modem Driver of PTCL V Wireless on windows 7. In this article you will find how to install huawei modem (ETS2558) drivers of previous version windows (XP) on windows 7.
Other user (other modem brand) of PTCL V or windows XP service pack 3 and vista user may get help from there to install their drivers.
As we know that win 7 has great support for previous windows applications so software make no problem only driver create a problem.
To install the driver follow these steps.
1- Insert CD into CD/ DVD ROM.
2- Cancel auto run of huawei application.
3- Go to start Menu in search bar type "Troubleshooting" and open it from menu.
4- Now click on programs and follow the instruction (Run application in Win XP service pack 2 compatibility mode and follow procedure same as XP).
Select not listed….
Select Location of application….
Click on "Try recommended settings"
Now click on start the Program…
5-After installizations save compatibility settings. (Windows may warn u that it is not compatible just ignore it).
6-Now go to the Device manager here you will see TUSB3410 DEVICE IN Multiport serial adapters which will be marked with some sign Right click on it and then click on update driver. Now click on brows files from computer and select CD/ DVD ROM in which driver is found. It will scan the CD/ DVD ROM n find and install drivers automatically.
7-Refresh the list of device manager or re-open it. U will see that USB-Serial Port (COM 3) in Ports (COM & LPT) will be marked with sign. Now perform same procedure as in step 6 with it.
Now you are ready to use your application.
Now open application ptcl v and click on connect it may take 1 to 2 minutes by displaying a message initializing.
I previously had Ubuntu installed, but just installed windows 7 professional with service pack1, 32-bit X86 Full.
It seems that I can't connect to the internet though. Not via the wire(LAN) or wireless. When opening up device manager the following is located under OTHER DEVICES:
I've tried drivers, updates, manual driver install, I've tried canyon support, literally everything. But I just can't get the wireless card (CNP-WF511) to work with my PC. My OS is Win 7 x86.
Have recently returned my laptop to factory settings, increased the memory and installed Windows7 and have now lost the wireless capability - usually switched on using Fn+F1 buttons.
I have purchased a D-Link 1040 wireless print server and have connected it to my printer using a USB connection. I have installed the software. I turned the power on and pressed the little button on the side of the print server to enter search mode. In Windows 7 I tried adding a device but my computer can't find it.I suspect I may have to make some network connection or adjustments using my wifi modem. How to proceed?
I recently purchased a D-Link Wireless N 150 Roiuter (DIR-524).I have a home network of 2 desktops (both wired) , one running Windows 7 Ultimate, another Windows XP and the third is a Laptop (wireless) with Windows 7 Home Premium.My Laptop easily connected to the router as did the Windows XP. But the other desktop with Windows 7 Ultimate has become abominably slow and is randomly freezing.
Specs: Windows 7 Ultimate 2.4GHz P4 Processor 2GB RAM VIA motherboard (P4M266A)
All wireless drivers i have tried on the machine has refused to work after installing Win 7. The model is dell inspiron 9300 Does it mean there is nothing i can do to solve my problem
I downloaded the Diablo 3 beta client from the official blizzard website yesterday and ever since I started installing it I was able to connect with my wireless but not access any sites whatsoever, (for some reason aim works). I have tried connecting on the same computer with a wired connection and that works and tried using my wireless on another computer and that works.When I try going to any sites in google chrome or try the windows troubleshooter they both give me a DNS error message.So far I have tried:
Okay so i have an older Wireless PCI Card from like 5 years ago, I didnt have an antenna for it so i didnt use it, I recently came across the antenna and put the card in my PC, The "Ethernet Controller" says it doesnt have the drivers, and windows wont find it on its own. So i have gone to the website and downloaded the driver and software, it all tells me there are several missing .dll files.
So i downloaded them virus scanned them etc. and still no progress on getting the card installed. I dont know where the CD for it is and i doubt the CD would even work for windows 7. Can anyone help me out with this prob? Its a Wireless-B PCI Adapter 2.4GHz Model No. BB720C808230
I have a Usb wireless card.... I dont have the make and model on me at the moment but when I plug this into a USB socket, Windows 7 picks it up as a bluetooth device (with errors)
I have the drivers on CD but not sure how to install the drivers, as going into device manager thinks its looking for bluetooth drivers.
I am trying to install my printer to my wireless network, but I keep getting an error message that I am not the administrator on this computer. This is my personal computer, so don't know why I would not be the administrator. I did set up a homegroup and add my printer and all my documents, but that doesn't seem to make a difference.
I am on a Verizon FIOS wireless network. We have both a Toshiba and Sony computer. I downloaded the latest drivers for my HP Photosmart 6280 printer and was able to successfully install my printer wirelessly. However, no such luck with my Sony. I download the same drivers, and it goes through part of the installation, but at some point I get a message that 'the system cannot find the file specified', and then it rolls back the install, deleting the download.
I installed a new wireless adapter yesterday in the hope of increasing my internet speed. After installing the driver for the adapter I realised that my internet was no longer working. I can still see the connection but it is limited and doesnt allow me to connect to the internet. I also had a system up date the night before and hadn't been on the internet since that happened so am unsure if this has any part in it.I have tried uninstalling and reinstalling the drivers for both the adapters i have to no avail, as well as plugging my pc into a laptop and using internet connection sharing which also doesnt work.If i run a network repair i end up with two problems found:
1)There might be a problem with the driver for the local area connection adapter
2)There might be a problem with the driver for the wireless network connection adapter They both have yellow signs with exclamation marks next to them.If i type ipconfig/all into the cmd line I get:
My wireless internet speed decreased by 90 % after installing firefox and free download manager,.if i use my net connection in another laptop it works fine, with good speed i am using sony vaio
I have a Dell Vostro 1015, I need to install wireless drivers on it.While installation I get a message saying "No compatible hardware found. The software you are attempting to install is not supported on this system. The software will not be installed. Setup will exit now". I am trying this from past 5 months. I have tried it on both 64 and 32 bit windows 7
I got a new hard drive finally and when I press install now it looks for some driver. I think its sata controller driver but I'm not sure. My motherboard is a ma785gt_ud3h.
i changed the OS of my laptop from windows7 starter to windows ultimate x64. but i cant connect my laptop to the internet. some drivers are missing. {2 BASE SYSTEM DEVICE DRIVER missing, ETHERNET CONTROLLER DRIVER missing, NETWORK CONTROLLER and VIDEO CONTROLLER DRIVER is also missing.} solve this?i tried to install the ethermet driver i downloaded. but it always shows this error " error:failed to install, no device driver is present to your computer"
I have ATI x1950 pro VGA card and I need to install its driver on windows 7 x64
I tried installing the legacy 10.2 driver downloaded from AMD website but after installation I restart the PC, I see the windows 7 loading logo then I can't see the welcome screen but I hear windows startup sound! to be able to see my desktop again I have to hard restart the PC and login to safemode and remove ATI driver (which shows under unknown devices)
The problem isn't with ATI driver only it seems that I can't see my desktop with (microsoft's Standard VGA Graphics Adapter driver) also (check attached image)
I tried removing ATI driver and clean the system with "AMD Catalyst TwL Cleaner v3.9.2" but I got the same problem after using.
I have a computer that came with windows 7 home pre-installed. After the 1st month's trial period we decided to install windows 7 enterprise. [code] Second problem is that the windows cannot be installed since the right driver cannot be found. Using the windows software we first disinstalled the initial windows 7 home editions and followed the next steps to install the new windows 7 enterprise version.After finishing the language set up a new box comes up to "select the driver to be installed".Whatever I do, the programme cannot find right driver.I got the necessary driver from the company that configured the computer, but the systems does not recognise it. I have tried to check the BIOS set up, and it appears to be alright...., though I am not really an expert. Which driver should I use in this case?Is there some set up change to consider before installing windows 7?
I was installing ubuntu and on my hp and it was successful. But after, windows failed to boot. I tried repairing and it failed. I've tried a clean windows installation but all windows Dvds cant read the partitions. When I reach at where to choose where to install windows, no hard disk partition is seen and I cant proceed.I tried installing windows xp but it also failed to reach where to choose partitions.
I've have had three working Windows 7 images (Lenovo T510, Lenovo X201, and a Fujitsu T900) for several months. Periodically I install MS updates, make other necessary changes, run sysprep, and recapture the images in an effort to keep them current. Recently now during this update process, after running sysprep (using the same sysprep xml answer file that I have been using all along), wireless no longer works after applying the updated image. The wireless driver appears to be installed, but will not detect any wireless networks. If I attempt to create a wireless network profile manually, I receive "an unexpected network error has occurred."
The wireless device does appear in Device Manager as though it's in tact but if I run diagnostics, the wireless device is not found. Uninstalling, and reinstalling the driver does not fix the problem. I have come up with a workaround, but it is not a true fix, as the workaround prevents me from being able to consolidate the T510 and X201 into one universal Lenovo image as I should be able to do. The workaround consists of adding the following two lines to my xml file:
This allows the wireless to work again because sysprep no longer strips the wireless driver as it processes. However because the wireless driver remains on the image after sysprep, I lose the ability to consolidate the images. After I Inject the T510 drivers into the X201 image, or vice versa, after then I apply the image, wireless only works on the model that the image was captured on, even though the wireless driver for the other model was injected into the image. The strange thing is that the T510 and X201 have the same wireless chipset.
Is there a windows 7 driver for a DWL-G122 wireless usb adapter? I have the installation CD that worked for my computer with windows XP, but my new computer with windows 7 won't register this usb adapter?
