I'm using HP Pavilion dv6114tx laptop which has SPDIF audio support which is connected to Logitech 5.1 audio system thru 3.5mm three audio jacks.
When i play the song/movie i get all the speakers and subwoofer working fine. But when i test the audio thru the Speakers Test thru Windows Media Center all the speakers are working except the subwoofer.
I have recently purchased a PCTV Nanostick DVD-T2 290e I am running Windows 7 Home Premium 64bit and I use Windows Media Center for almost everything. I run a media center machine in my lounge through my Sony AV Amp onto my HD TV.I bought the Nanostick to watch �Freeview HD� programmes when watching the TV through the Media Center � I also have a Sony Freeview Plus system that the Mrs uses.I installed the Nanostick with relatively no issues and as described by many user reviews Media Center picked up the new USB tuner and scanned all the new channels and I was presented with all the HD channels. The issue I have is that there is no audio sound from the HD channels but perfect video. SD works fine.The software that comes with the Nanostick works fine � both sound and vision are perfect for the HD channels.
As mentioned, I run my Media Centre lots. I have an extensive DVD and BD collection stored on a server and DVD and BD all play perfectly through Arcsoft Total Media Theatre 5 � with no issues on either SD or HD. My sound card is built into my motherboard and that sends the audio signal to my gfx card and that in turn passes it through to my Sony AV Amp that decodes the audio to be heard on my 5.1 set up.
verything was working fine, i could use media center for watching TV, recording. ect .. all of it. I didn't install any updates, or add any new hardware or anything. I should do the computer started it back up, turn on WMC went to live TV and all i get is a BLACK WINDOW, with sound .. but no picutre
OS Windows 7 64 Bit ATI Radeon HD 4670 - Last driver update July 7th 2012 Driver version 8.970.100.300 TV Tuner - Hauppauge 950Q Mother Board - GA-H55M-S2V V1.4
I'm so at a lost as to why video won't work. I use WINTV7 and everything is perfect. Like to use WMC as it is had your tv listings and and quickly record what i want.
need help in changing the DVD Audio setting under MC, DVD Audio setting menu. I want to change the audio setting to "Theatre Mode", instead of "Night Mode" ... to provide a full range of sound, but this option is grayed out. Does anybody know how to change this ..
I tried changing it under Media Player but it does not affect the Media Center setting.
Is there any way to compensate for the bluetooth headphone audio delay while watching Live TV in Media Center? For movies it's simple I can do it through Media Player Classic but I don't see how to change any kind of audio shifting setting within Media Center.
View 2 Replies View RelatedI'm trying to watch doom but, it's a dual audio avi it plays fine using the eng track in any other player but media center using the media browser plug in chooses the alt language.
View 1 Replies View RelatedIt doesn't seem to work. Every time I click it, it gives me no audio. I have verything set up right so don't bother telling me to go into more properties.Is there a 3rd party program that can handle this instead? The decoder on Windows sucks with my receiver and I want to use the receivers decoder.
View 1 Replies View RelatedHow to Change the Default Windows 7 Media Center Media Browser Icon ?
View 0 Replies View Relatedim trying to reinstall windows from my recovery discs and am getting media test failre check cable message. am I missing a set? i cant seem to find reinstall directions anywhere
View 1 Replies View RelatedI'm in grave problem here. I just installed windows 7 x64 a few days back. And initially I installed the 32bit version of k-lite codec pack for my windows media player. The media center worked fine then. It was loading my ffdshow and ac3filter along as I checked it.But then yesterday I noticed that the same pop-up od recommended/express install of WMP came again. Initially I thought that it must be some bug or something, but then when my MKV and AVI files didn't work in WMC, I realized that somehow WMP x64 got triggered, and now it is using the x64 bit of WMP in WMC. And I just wanna revert back to 32-bit WMP in WMC.
View 9 Replies View RelatedI have checked two seperate DVD movies and they stop after the splash screens, FBI warning and Corporate logos, and never make it to the DVD menu.
This DVD player is an external player and I have no problem with playback on my Dual boot with Vista Home Premium.
Any suggestions?
I can't get eithe WMP or MC to play a DVD. I've set the region code. WMP acts like it will play, but then just goes blank, and MC says it cannot play the DVD. These are original discs, not burned copies. I have a custom built system, with 2 graphics cards (GTX 260 and a GT 220) 6 GB of RAM, and an i7 processor. Any help would be greatly appreciated.
View 7 Replies View RelatedYesterday while watching an online baseball stream and simultaneously browsing facebook, my computer randomly gave me an error message. Unfortunately I don't remember what the message was about. What I do remember is that I immediately opened a new firefox tab and searched up the error. I clicked on the first link, and the OP was talking about how he had received the error and shortly after, his computer shut down. Almost on cue, my computer crashed and restarted itself.Ever since then, I can't boot up my computer properly.I turn on the computer, I see the first two screens that I always see (BIOS screen and then the 'Detecting eSATA drives' screen). After this it goes to the third screen, which I also always see. But this is where the problem is.First it loads all that code crap that I never understand. Then, like always it gives me these two lines: 'Verifying DMI Pool Data....'And then 'Boot from CD'. This always happens. But regularly from here it just boots up and goes to the Windows loading screen.Now, on the same screen, it starts giving me error messages.
NVIDIA Boot Agent 253.0543
Copyright (C) 2001-2008 NVIDIA Corporation
Copyright (C) 1997-2009 Intel Corporation
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting NVIDIA Boot Agent
[code]....
Before, I was also getting the error message 'PXE-E53: No Boot Filename Received' prior to the media test failure message. After I unplugged and replugged my internal hard drive (some forums were saying to check the cables for the hard drive) the first error dissapeared.I have a Windows 7 Ultimate 64-Bit OS. I bought the computer second-hand off a guy who was selling it online. He didn't have any of the CDs, so my copy of Windows 7 is burned (though I do have the CD still). Before yesterday it was working fine.All I want to do is to be able to get into the computer (Hard Drive) once, so that I can backup all my files and then I'd reinstall Windows 7 from scratch.
I was watching a movie on Netflix, stopped to go out and closed my laptop (HP Pavillion dv100 with Windows 7) so it would sleep till I got back from the store. Unfortunately, it tried but it said it couldn't "come out of hibernation" so I said OK to restarting it. But then it kept making funny noises with the DVD drive so I took out the DVD movie. [I'd left it in there for a couple of weeks cuz the DVD &/or WMD also wasn't working and I'd been working on installing an updated driverfor my video card but I wasn't getting anywhere.] Once it was DVD-less it tried to restart, but it got to the B & W Intel screen and then tried but failed to open Windows 7 and then it flashed the following error message (and has ever since):[CODe]
View 6 Replies View RelatedYesterday while watching an online baseball stream and simultaneously browsing facebook, my computer randomly gave me an error message. Unfortunately I don't remember what the message was about. What I do remember is that I immediately opened a new firefox tab and searched up the error. I clicked on the first link, and the OP was talking about how he had received the error and shortly after, his computer shut down. Almost on cue, my computer crashed and restarted itself. Ever since then, I can't boot up my computer properly. I turn on the computer, I see the first two screens that I always see (BIOS screen and then the 'Detecting eSATA drives' screen). After this it goes to the third screen, which I also always see. But this is where the problem is.First it loads all that code crap that I never understand. Then, like always it gives me these two lines: 'Verifying DMI Pool Data.
View 3 Replies View Relatedfriend speed his computer up by turning off certain things off from startup and services like skype and steam when suddenly it crashed after a reboot. then the message pxe-e61 media test failure check cable comes up every time I reboot. I need help as soon as possible because he has a paper that is due and I'm feeling really bad for causing thihe hard drive is detected in the BIOS. It's a Hitachi. I didn't get the model number because he's not very happy right now. I also can't seem to get pass the Windows logo when I pop a Windows 7 boot disc in there.
View 3 Replies View RelatedI have an HP dv5 notebook PC with windows 7 (64bit) I3 cpu m330@2.13 ghz. I recently had to wipe my hard drive due to a virus. I bought this 2nd hand and wasn't provided any disks. I do have a Dell re-installation DVD with the same OS. I realize this disk won't install my drivers but was hoping there was a way i could install just the OS and download the drivers after. I do have the original product key for the HP. Now when i start up it says "No bootable disk-- insert boot disk and press any key" or "Media test failure, check cable". Even with before mentioned re-installation disk inserted. When i goto Setup Utility: Diagnostics and run the Primary Hard Disk Self Test and the memory Test it Passes both. When i go to System configuration (f10) this is what i see[CODE]
View 2 Replies View RelatedWhen I open Windows Media Center - Internet TV is listed.On the windows website it shows that I should have that option.So, I assume I don't have something set up right.I have a TV tuner and I can record and watch TV just can't get to see the Internet TV channels.
View 1 Replies View RelatedI have installed Windows 7 Professional on my laptop and it has Media Center. But I can't see any way to access Netflix. Is Netflix support available on Windows 7 Media Center?
View 7 Replies View RelatedI'm trying to make my wallpaper but when I scale or fit it with desktop personalization it cuts off an important part of it or it doesn't cover the whole screen.I want to take a full screen shot in Windows Media Center but whenever I take the screenshot I just get a black screen and not the screen shot.So it seems it may be a bug or something and I'm not the only one with the problem.I followed those steps and added what they told me to with Regedit but it still didn't work for me. The author in the article says to "restart" media center does that just mean to close the program and open it again? I tried that and it still didn't work.
View 4 Replies View RelatedI am currently using Media Center but was wondering if there are anything better out there. I have alot of MKV files so I would need something that can play those.
View 1 Replies View RelatedI want use a self build pc. The spec are Asus motherboard Intel socket 775 2.6 quad core oc'ed to 3.1 16 gig of 1333 ddr3 ram and a Asus Nivida 9800gt graphic card. Would this system be good enough to run and play tv programs?
View 1 Replies View RelatedI know there are a few DSP plugins for WMP but are there any that integrate into Windows Media Center?
View 1 Replies View RelatedI was wondering, if I run an HDMI cable from my computer to the TV, can I run Windows Media Center over on my TV in the background? If so, would I be able to say play a game on my computer while my parents are watching something with media center? (without audio of course) Would I be able to use a remote with the media center running in the background, and still use my mouse and keyboard at the same time(while the remote is being used)?
View 8 Replies View RelatedI recently purchased a Media Centre PC with a Compro E750 Dual Digital PCIe HD TV Tuner. When I record a TV program I get large blocking in the picture and it is difficult to watch. I have a clear picture when normally viewing TV and when viewing TV programs from web sites.
View 2 Replies View RelatedI am experiencing issues with WMC in combination with Windows Firewall. With the FW turned on I cannot watch live TV and get an event viewer message "WMDRM-ND" Error. Turning Windows Firewall off resolves the problem. As I do not want to turn the FW on and off all the time I would like to know where I have to apply the relevant tweaks so I can watch TV with the FW on.Ideas anyone?
View 6 Replies View RelatedI recently tried to use windows media center to connect to my xbox. I've had my hp laptop for over 2 years now and may have never even used WMC. But whenever I try to launch it, the blue wheel next to the mouse pops up for a second and then nothing. Nothing happens at all.
I've tried going to programs and features and turning off both WMC and WMP, restarting, and then re-enabling them. This has done nothing. I've even gone into Windowsehome and deleted all the files in it and did the disable/enable thing (I did, of course, make a backup of the folder). I looked through the programs and features themselves, hoping to find WMC so I could see if there was a repair option, but it doesn't show up. How can I make WMC work?
I started watching an OTA recording with WMC7 and about 2 minutes into it WMC7 stopped. A message came up saying it stopped & had options to restart WMC or go online (which appeared to send info to MS) and a 3rd option I don't recall. I just restarted & everything worked just fine.
I looked at event logs & found this. I did a search for that ntdll.dll but could not find a definitive answer to what caused the problem. The typical comments were to reboot or reinstall software. Is there anything from this listing that tells or hints at what caused WMC to stop?
Log Name: Application
Source: Application Error
Date: 11/7/2012 5:09:23 PM
[Code].....
I can't open any programs because of windows media center. I tried to access the "default program" which can be found on the control panel but still the WMC pops out and also the regedit in the start-up menu still WMC pops out. All my app icons are WMC. If i open it WMC will pop out. Lastly, I tried to make a system restore but it didn't work because WMC pops out again.
View 2 Replies View RelatedI need to set up windows media center on my sons computer. he has a verizon fios set top box.we do not have a windows media center remote or any IR remote. all we have is the verizon remote for the verizon box.so how can i by pass the stupid IR hardware not connected message?
View 9 Replies View RelatedWhen I first upgraded from Vista Premium to Windows 7 Home Premium I was able to view a TV movie using Windows Media Center but I had accessed the WMC from a web site.Now I can't find Windows Media Center, even when I press Start > and look in Programs. However, Windows Media Player is listed.When I press Start and enter Windows Media Center in the search field nothing comes up.In Programs and Features there is listed "Windows Media Center Add-in for Flash"
View 8 Replies View Related