Every time I try to install ANY windows update, it restarts and fails when it gets to 15% configuring.I've tried installing separately, from safe mode and from a clean boot.I'm not sure what the problem is.
View 2 RepliesI'm out of ideas. I've been running Win 7 on this machine for more than a year without issues in updating etc. Now it will not search or update/install critical items. I'm running Symantec (even tried turning the firewall off without any success). I get an error code 80072F7C. When I run hijackthis, I get an error message that my system denied write access to the Hosts file. I proceed with the scan but am unable to produce a log file. I've included a screenshot from the windows update error as well as the error I get when trying to run hijack this.
View 1 Replies View RelatedA while back, after successfully downloading and installing some updates in the Windows Update, it prompted me to restart the computer to finish the update installation process. However, I continued to use the computer for quite some time before restarting it, and then when it tried to configure the updates on the start-up screen, it showed that it was not successful in doing so. In the past, I noticed that this would typically happen when I did not restart the computer immediately (or within a short time) after the updates finished and I got the prompt to restart. I would have to go to Windows Update and do it over again, and then upon immediate restart, it would always work properly. But this time, it did not, and I keep getting the 8000FFFF error message instead.
Also, now, every time I start the computer, it shows that it's "Preparing to configure Windows... Do not shut off computer" (presumably the updates that never got completely and correctly configured) in the start-up screen... gets to 35%..fails... shuts down (screen goes black)... restarts again... tries to configure again, fails again, shuts down and restarts again... tries to configure again, fails again, and finally it apparently gives up and says "reverting changes" and finally goes to the desktop.I've looked at the answers in several threads at the answers.microsoft.com forum that were started by people with similar problems, and also tried several of the Microsoft "FixIt" files on the Microsoft site, but none of them worked. I'm using Windows 7 Home Premium.
seeing as it had infected my services.exe, part of the fix was to get a new copy of it, or something around those lines; this will come in to play later, I think. Anyway, its been a LONG time, my last update whenever I try running windows update, it runs for a bit and tries to receive the updates, but then stops and displays a message saying it failed to update, and gives me the error code of 80246008. I've looked this up, and I see that it possibly has something to do with the background intelligent transfer service.
View 8 Replies View RelatedI own a W7 home premiun Pc.For the past 3 weeks i have been trying to update windows.Each time i try, i get the word "FAILED" code 8024200D comes up.I tried getting in touch with windows with no luck.I followed their "FIx it"Repair soft ware again with no luck.I spent hours on my Pc following do's and dont's. I even get the same process of downloading the 2 updates when ever i shut down for the day.
View 3 Replies View RelatedUntil a few weeks ago I was running the following computer and I use it just for gaming, I changed the Motherboard to an Asus P8Z68 and used a different i5 2500k-everything else remained the same. I erased the SSD and did a clean install of Win 7. Loaded the mother board drivers, video drivers and intel rapid storage. The system boots up and appears to be working great. If I try and use windows update I get the error code 0xc80003fa. I have googled the error code and done everything that has been suggested to fix the issue and still nothing. I have done another clean install and get exactly the same result.
View 9 Replies View RelatedI noticed one of today's updates seems to be messing up my volume icon. After installing all updates, if I right click the volume icon nothing happens. I did some testing and it is an update, but I'm not sure which one it is.
View 1 Replies View RelatedSome updates were not installed.Failed 8 updates
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-WBGQ8-F8TDC-Y638B
[code]......
My windows update says it has 55 important updates but when I attempt to update it says that the updates were not installed and gives the error code 80246008. The windows help and support tells me I need to change or restart the background intelligent transfer service (BITS) but it isn't in the list of services that it directs me to. The microsoft fixit and automated troubleshooter fixes have both failed to help and I'm a bit worried this is a symptom of a real underlying problem.
View 1 Replies View Relatedwindows update error "WindowsUpdate_80070BC9" "WindowsUpdate_dt000"I am using windows 7 64 bit I cannot install any important updates and haven't been since 8/2010
View 1 Replies View Relatedfixed renamed the software distribution folder did the trick.
View 2 Replies View Relatedi cant install the service pack 1 for my windows 7 and im using 64bit OS. every time i try this, it "downloads" up to the 29% and then gives me that error. i have tried everything the the info page tells me to do (which isnt much), i even downloaded some repair tool from microsoft downloads page to see if it helps but for some reason it doesnt even there reads in the description that it should fix the update error 80070002.
View 10 Replies View RelatedIm getting window 7 update error 0x80070490 can anyone help me? It says that it's installed but by the time it boots up it says it didn't install.
View 4 Replies View RelatedRecently my son had W7 Virus which appears to have been removed. He is running Comodo A/V and Malwarebytes, both of which find no errors. Had problems starting a few services butthis forum, was able to get them going. Problem now is that when Update Request is run a 7023 error appears in the logs about every 30 seconds. Detail shows: Windows Modules Installer Service Terminated with reason "access is denied". When I try to start the Service it gives Code-5 and same Access Denied. Other associated symptoms are, "View installed updates" incorrectly shows no updates and "Windows Features" shows a blank list and never completes. Note that updates HAVE been installed in the last 5 days and are listed correctly.Several Logs are posted below:Farbar Service Scanner Version: 31-01-2012 01Ran by matt (administrator) on 31-01-2012 at 21:14:45Microsoft Windows 7 Ultimate Service Pack 1 (X86)Boot Mode:[CODE]
View 3 Replies View RelatedI have a 6 day old TOshiba Notebook with Windows 7 64-Bit. I can't do windows update because of an error code 8024402F.
I tried the troubleshooter - doesn't work. I tried disabling antivirus and firewall - still doesn't work. I tried the Microsoft Fix It thing - again still doesn't work. Even a reinstall of the system didn't work.
When trying to install Microsoft Security Essentials - KB2267621 i get this update failed error Code: 8004FF66
View 2 Replies View RelatedI have 6 updates that will not install (KB2633873) (KB2641653) (KB2645640) (KB2654428) (KB2640148) (KB2660075). I have tried each of them separately and all have failed with the same error, I have downloaded and ran the System Update Readiness Tool with no success. Here is my CheckSUR.log.
Code: =================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 14.0
2012-03-19 02:13
[code].....
I recently installed Eset Nod32 Smart Security 5 which have inbuilt antispyware and Firewall. I never had a problem with it because i have been using it for awhile. But just today when i tried to update windows i get this error I am confused why this error?
View 9 Replies View RelatedI am running windows 7 OS. Updates are available, however when I try to update all updates install except one for Security. Net framework and I get an error 643. It suggested installing windows update readiness installer, which I did, but I get the same error.
View 2 Replies View RelatedError code 643 for windows update
View 1 Replies View RelatedThis has been going on for a couple of weeks. Every time I shut down my laptop, it TRIES to Update. I finally realized that something is wrong. I went into the Update folder in Control Panel and looked at the "update history" to find that every time I shut down, the update attempts have "failed".The error code is 66A. I tried the "Windows Fix-It" and it didn't work. I don't know what to try next. The three update items are for NET.Framework 4.
View 6 Replies View Relatedjust brought laptop yesterday try to update windows keeps saying error 80070002
View 3 Replies View Relatedhad a virus last year with an underlying update problem. the virus got sorted but i was told the only way to sort the update was to reinstall windows. basically every time the laptop was turned off it was have to reinstall all the updates as they dont seem to save when it shuts off. i left it at the time as it was only 25 or so updates. it is now at over 90 updates and i am missing some security updates. when i try updating manually it comes up with code 80071A91-windows update encountered an unknown error.
View 4 Replies View RelatedI am trying to install the "Update for Windows 7 for x64-based Systems KB2718704)," however, whenever I try to install it, I get the 800B0100 Error Code. I have tried using Windows Update to do it automatically, and I have also tried to manually install it by downloading it from the Microsoft website; neither method has workedAlso, this the TSG SysInfo log:Tech Support Guy System Info Utility version 1.0.0.2OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bitProcessor: Intel(R) Core(TM) i5-2310 CPU @ 2.90GHz, Intel64 Family 6 Model 42Stepping 7Processor Count: 4RAM: 6056 MbGraphics Card: Intel(R) HD Graphics, -1988 MbHard Drives: C: Total - 939685 MB, Free - 620803 MB; F: Total - 476937 MB, Free - 263103 MB;Motherboard: Dell Inc., 0GDG8YAntivirus: AVG Internet Security 2011, Updated and Enabled
View 13 Replies View RelatedI am using Windows 7 Home Premium on a 64 bit operating system. I haven't used this computer in over a year, but my brother has been using it since, but hasn't kept it updated at all or with any anti-virus. I was able to install everything on Windows Update except Security Update for Windows 7 for x64-based Systems (KB2621440). I've tried everything from simply restarting, rebooting in safe mode and safe mode with networking (I could not open windows update either of those ways), and doing a safe mode with networking full scan with Malewarebytes Anti-Malware, Super Anti Spyware, and Microsoft Security Essentials. I did find 2 trojans and removed them and rebooted, but was unable to install this security pack still. When I tried installing the individual version of the security pack online, it told me the update did not apply to this system. I also tried running the windows update repair tool. I made a separate administrator account and downgraded my own account to a standard user, but I'm unable to demote my brother's administrator account. His is not password protected, but there is no option to change the account type, even when I'm logged on as him or under the other administrator account I just made.
View 3 Replies View RelatedMy grandmother called me today after she tried installing some updates from microsoft, she told me that she got the error code 80070003?
HP pavillion dv-4 1555dx windows 7 home premium 64-BIT 4GB ram intel mobile graphics card 320 or 250 GB hdd
I was trying to install Windows 7 Service Pack 1 (KB976932) on Windows Update and I got error code 80070490.
View 6 Replies View RelatedI'm running Windows 7 64 bit on a dell laptop ( which is wireless) About 95% of my automatic updates fail with the code "800B0100" tried the "fix it" from MS, no luckI try to download the "system rediness update tool" from MS but keep getting a page not found prompt. I turned off the windows and McAfee wirewall, but that didn't help either. I'm using a Netgear N600 router. Maybe it has a firewall. It's just a Windows problem though, all other updates ( McAfee, Adobe, etc.) work ok.
View 9 Replies View RelatedI had the same 3 updates continually installing everytime I logged on. They were sucessful in update history but kept comming back. I ran the system rediness tool, but it didn't help. I ran the microsoft fix it soultions for windows update normal then aggressive. Now I get this error while checking for updates. I tried to run sfc /scannow and then sfc /verifyonly but get the following error: windows resource protection could not perform the required operation. I also tried to install the latest service pack got the following error: error_sxs_componet_store_corrupt(0x80073712). When I look at programs->installed updates nothing listed, also when I look at programs->turn on/off windows features nothing listed.
View 6 Replies View RelatedNo updates on this computer..[i know that all updates were installed] updates won't install..tried a bunch of repair suggestions, but no work, maintenance : back-up, check for updates & troubleshooting system maintenance 'status not available'. I tried to run sfc/scannow but said 'could not start repair service'. Somewhere I ran into error code '80080005'. Windows 7 ultimate x64. This all started when a friend opened her mail on my computer..
View 9 Replies View RelatedIt started freezing up around the same time an update for my video card would not install. The video card is running about 47 degrees C. I did a clean install to change from Windows 7 32 bit Home Premium to 64 bit Home Premium and still freezes randomly. Sometimes it will go a long time before it freezes. I have a NVIDEA Ge Force 8400 GS and I did install the 64 it drivers. I ran Malewarebytes and no problems there. The windows update that will not install is a Graphic Adapter WDD M1, WDD M2.
View 1 Replies View Related