Windows 7 Installed From USB But When USB Plugged Out Window Ask For Bootable CD?
Jan 18, 2013
I have installed Windows 7 from USB, but when I plugged out USB and start windows after shutdown windows dont start. It says Insert Win Bootable CD to continue. I installed win 7 from USB then upgraded the win7 to 64 bit dirctly from Hard Disk.
View 1 Replies
ADVERTISEMENT
Jan 22, 2013
I have a laptop with Win 7 HP 32bit SP1, which doesnt boot at all, if the power cord (AC Adapter/Battery charger) is plugged in. Further if power cord is plugged in after booting, the system hangs / shuts down. It runs fine on safe mode. I believe it is a driver updation problem but not sure. I have updated all drivers given in Toshiba download site.
View 3 Replies
View Related
Apr 23, 2011
I'm running W7 Ultimate 64bit on my Biostar PC,after installing IE9,all the shortcuts open in a small window and need expanding,can this be fixed?
View 3 Replies
View Related
Jan 26, 2011
I'm Running Windows 7(64bit)Each time I boot into Windows 7 Prem (64) a open window apears requesting my username at the top of the open window to specify a a program to open it?I've clicked on note pad and I get the following information that apears, each time though it requests, or looks for a program to use to open.
===========================================================================
Interface List
1...........................Software Loopback Interface 1
14...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter
16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
[code]....
View 1 Replies
View Related
Feb 16, 2012
Whenever I search in Windows 7, I want to have the ability to open found folders in a new window. If I r-click, that option is not there. Is there a way to add this to Windows 7?
Also: When I go to 'open file location', the file's folder opens in the same window - highly annoying. In Vista, it opens in a new window. Anyway to change this behvior in Windows 7 to act like Vista, so the file opens in a new window?
View 6 Replies
View Related
Aug 22, 2012
I am running into an issue where I can open a window/program with my mouse however once the window is open I cannot click inside of it. The window becomes inactive. I also have noticed I cannot right click on my desktop to bring up the properties. I can right click on the window in the task bar to close it but not in the window. Since this is happening I am limited to command prompt. I ran sfc /scannow with no errors. I tried with 3 different mice. I booted the computer into safe mode with command prompt and brought up the device manager to show devices not in use, and when the device manager window opened I could click inside it! since I could use the window I uninstalled all mouse drivers, and reinstalled my microsoft wireless usb mouse driver.. while in this safe mode I changed my mouse properties to system default as I read somewhere that can reset things. Next I booted the computer in safe mode (without command prompt) and still the same thing. I was trying to do a restore point as well however my Kaspersky antivirus 2012 is preventing that as i cannot find a way to kill the program through command prompt.
View 5 Replies
View Related
Nov 19, 2011
i had installed windows 7 in my laptop,but accidentally i installed it in D-drive,now both C & D drives are showing program files,program files x86,windows folders,my D drive is full
View 1 Replies
View Related
Oct 13, 2011
My pc hangs when i insert usb. Initially hanging problem started when I mounted in daemon tools den when I inserted memory card reader and new when I insert my pendrive. Sometimes it also hangs suddenly. But everything works fine in safe mode. No virus -Quick Heal and No malware even in online panda security scanning.
View 1 Replies
View Related
Oct 29, 2009
I just got an ipod today and when i try to plug it in to the PC it will disconnect itself after like 5 seconds. I tried on my neices laptop what still has vista and it works fine.
View 8 Replies
View Related
Oct 10, 2011
Last weekend, I've re-plugged the keybroad at the machine under turn on status after cleaned, however, cannot start up the Windows afte re-boot. I've tried to use Startup Repair, System Restore to fix the problem under the System Recovery Option, but, all failed.I typed dir c: at command prompt, one directory call "Recovery" display only. Windows, Application & all working documents have been moved to driver D and driver X which labled "Boot". My friend told me that may be I've pressed the F11-Recovery Key but without complete whole recovery process.(Only C:-Boot, D:-Recovery in the hard driver before the problem caused) Blue screen display the error code as follow, 0X0000007B(0X80786B58, 0XC0000034, 0X00000000, 0X00000000)and told me may be the hard driver have the problems, but can use command chkdsk/ F to fix the problems, however, the result is also unsuccessfull. Since without makde the backup, I would like to know what I can do at this status and no need to re-install the whole system?
View 1 Replies
View Related
Mar 18, 2012
Starting yesterday I have been having audio problems. Whenever I plug in my headset it says it is not played in and when i hover over the sound thing it says sound is coming from the speakers. However, I hear nothing from my speakers. Now when I unplug it says it has found the device and sound is now coming through it. Needless to say I hear no sound from it or my built in speakers.
View 6 Replies
View Related
May 19, 2012
I have searched around here for my problem and can't find a solution to my problem.I have two SATA HDD's plugged into my computer, one of them has the operating system on it and the other one has my old XP installation and loads of others, although might have been formatted.When I tried removing the old XP one the computer does not boot up after bios, with the error along the lines of,"Can not find the boot device, please insert.
View 1 Replies
View Related
Oct 7, 2012
when i plug in my speakers (Logitech X140) or my headphones (wicked reverb from wicked audio) windows 7 (64bit) says that nothing is plugged in and no audio device is installed. The audio works in ubuntu (on a separate hard drive) when i look in device manager under sound video and game controllers it has NVIDIA High Definition Audio for times. It wasnt working on a fresh install. The reason i was using ubuntu is that this started happening a while ago and i got no help so i switched to linux but now i want to have windows so i can play games.
View 9 Replies
View Related
Dec 23, 2010
Driver is properly installed? When I plug in my ipod What is error code 43 in windows 7?
View 2 Replies
View Related
Jan 5, 2012
I bought a new MP4 from ebay, and it came with a usb cable, however when I plug the usb cable in to my computer, it will not find the device. It will only charge.
View 2 Replies
View Related
May 27, 2012
My rig is
ASUS Rampage iii Formula Motherboard
Intel i7 960 @ 3.2 GHz stock
Corsair H70 cooler
12GB of Corsair Dominator RAM
EVGA GTX 570 HD 2.5GB
So I record music on my PC and have 2 guitar pedals and a synthesizer running to my computer via usb 2.0 to utilize their midi features. For some reason though when I have all of these devices on at once, one of the devices keeps disconnecting and reconnecting over and over again. I switched out the usb cable for the device and same thing.
I got a nzxt iuo1 usb expansion hub to open up some of my usb ports for future use. I don't know if this could be causing the problem because the hub itself draws its power from a psu molex header. I have the hub plugged into one of my motherboards usb headers. The hub has two flash drives and the front panel usb and card reader panels plugged into it.
On the back of my tower at the motherboards I/O port, I have these items plugged in through USB; mouse, keyboard, GNX4(guitar pedal), GR-55(guitar pedal), MO6(synthesizer), and an xbox 360 wireless reciever for gaming. Do I have more devices plugged in than Windows 7 can handle?
View 11 Replies
View Related
Dec 26, 2012
Neither of my hard drives work in normal windows with the gpu in. On a fresh reformat they work for a short while before starting to click and freeze up. On an older installation this freeze is instant, as soon as the desktop loads.It works as it should in safe mode leading me to believe that it may be a software problem but I haves no idea.The hard drives work as intended in normal windows without the GPU.I don't think it's my PSU as it's 750 watts. If it's software I have no idea where to begin.It may be worth mentioning my mobo (MSI z68 gd55 g3) was sent away to get a BIOS update for compatability with ivy bridge, but I have installed the drivers for the update.
View 2 Replies
View Related
Apr 24, 2011
the problem now when i restart my pc it doesnot read it and i made the dvd boot before the hard disk and it still not booting from it.I tried to search before posting this thread, but i amnot very good on these things and i didnot understand how to solve it, please give me the steps for doing it and don't tell me "burn the cd" or "do something" as i don't know how to do these things
View 8 Replies
View Related
Jun 22, 2011
I want to know how I can make bootable DVD of windows 7 64bit ultimate, and I have this windows in form of ISO file but I do not know how to make bootable Windows DVD from this ISO file by NERO 8.
View 2 Replies
View Related
Jun 4, 2012
Can anyone please tell me what is the name of bootable files in windows 7 as well as in xp??
View 1 Replies
View Related
Jan 27, 2011
Just purchased my first Windows 7 Professional (64-bit) PC (Hewlett Packard). No media was supplied with the machine and I have been advised that media is not shipped anymore (apparantley it is Microsoft's way of ensuring media cannot be loaded onto several systems).
Reading comments on the internet it seems clear that I have to make an ISO file, but I'm unsure what directory/files I need to pick and copy.
View 7 Replies
View Related
Aug 4, 2012
[url]...
The tutorial for creating the bootable XP disc worked great and I would like to have a backup with SP1 on it for my Win7 Home Premium x64 (retail version). I didn't see anything in the Win 7 tutorials, maybe it can't be done with 7, but if it can I would do it so I have the cd with SP1 on it already.
View 2 Replies
View Related
Jan 25, 2012
Basically I am taking over the imaging process where I work. I will to start configuring our application to create universal images.
The first thing I would like to know is, I created a bootable (tested and used) Windows 7 64bit Enterprise USB flash drive. I would like to make this universal so when a new machine comes in I can either add new drivers if need and install from the USB.
Currently I have to install the drivers after the installation of windows has completed. Which folder in can I add the drivers into? I am thinking of creating sub folders for each model and another subfolder for the type of driver ie. video, nic etc I also created an autounattended.xml file and it always halts at the create partition wizard. If I manually install windows, windows 7 will create a second partition that is 100mb. I read in forums where most people only create 1 partition. Does it matter how many my autounattened file will create?
View 1 Replies
View Related
Aug 23, 2009
After installing windows 7, I have had a heck of a time trying to figure out what is wrong or if I got a bad ISO or what. Whenever I restart without a bootable cd or dvd in the drive, it gives me "invalid system disk, replace the disk, and then press any key" Now i pop in the windows 7 disk, control alt delete, and when it restarts it loads windows up just fine. Tried switching the primary boot as the hard disk and not the dvd player and still get this error. Had my mobo drivers disk in and its bootable and it booted windows 7 right up. Is something messed with the boot manager or is it just a bad ISO?
View 6 Replies
View Related
May 2, 2012
i have got Windows 7 64 bit home basic dvd...i want to format my system,,,i want to make a duplicate copy of Windows 7 64 bit dvd....so that i can install it in my system. when i format my system.
View 9 Replies
View Related
Jun 19, 2012
I'm new on this forum and happy to join to your community. Now days i hardly try to solve my laptop problem with re-installing it's windows. it has a Home premium 64bit windows with a sticky serial number. My laptop Model is: Dell xps l501 A with two usb 3 socket. the reason that i want to install the windows from a usb is my DVD rom has problems and can't reading any DVD disk, So I created a bootable usb 3 windows installer with the official program and boot windows installer from it. after a fast loading the language and location windows appeared and i hit the next and after that hit the install button. after a fast loading this error page appeared: "A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now seems like the installer don't detect my flash drive , because in browse windows i can see only my pc drives and dvd rom drive.
View 9 Replies
View Related
Oct 5, 2009
I am trying to get Windows 7 up-and-running on my Toshiba M200 tablet with an SSD.
The problem is that I do not have an external DVD and these machines don't allow booting from USB.
I've managed to get a fresh install onto the drive by installing it onto a partition of the old disk based drive and then copying this over using Norton Ghost. Unfortunately I cannot get this to boot, which I assume is a problem with the MBR.
I have a second machine running Windows 7, and If I mount the SSD using a USB caddy it all seems healthy and is marked as an active partition. Is there any way to get this drive booting without being able to load up the repair functions on the DVD?
View 8 Replies
View Related
Nov 11, 2011
am trying to install window 7 but after expanding windows files and restarting it takes me bak from step one again and again!
View 1 Replies
View Related
Dec 17, 2011
i got a windows 7 install disc and want to copy it to another dvd and make it bootable as well how can i do this?
View 9 Replies
View Related
Jul 15, 2012
i have question i am trying to make bootable cd of windows 7 but cant make it am trying from ages.i also got know that i make to comvert files .all files in iso .i download iso pro throught i did and it created some file says new.iso same place.i then burn cd but still not bootable please let me know how i can make bootable cd of win 7 .i have all the complete files including boot imgr
View 7 Replies
View Related
Oct 30, 2009
I am running Windows 7 Ultimate 32bit .I have ticked in Folder Options to open windows in same window but it won't work,the windows are opening in new window!
View 5 Replies
View Related