Windows 7 Not Immediately Finding Hardwired Network Connection?
Sep 3, 2012
I have been having this trouble for awhile now where after Windows 7 loads, I do not immediately connect to the internet through a fixed hardwired connection. It is delayed by about 2-3 minutes. I have changed cables many times, refreshed my IP Config, released it, etc. Nothing has yet to seem to work.
trying to create a home network. I am trying to share certain folders from my pc to my laptop. When I tried accessing the network drive, the computer is asked for a user id, and password. I set up the password, but I dont know what my user id is, how can I find that?
I'm looking for a piece of software (or Windows 7 gadget) that can display for me how many people are currently connected to my computer. I use my computer for personal use but I also have a lot of media files that are often accessed by my roommates, via their xboxes. Is there any software that displays the number of current connections held with my computer? This would be helpful for me, as I don't like restarting my computer if people are streaming movies, tv shows, etc from it.
Recently when I try and connect to the internet my wireless connection network says it is an unidentified network with no internet access. This never happened before.
I have a Dell inspiron mini tower that had some apparently critical either net driver deleted. I'm not entirely sure which driver it was or how to get it back. I've tried downloading a few drivers on another machine and then just transferring them to the bad one but it's not working (3 separate ones now). It was working perfectly before this "thing" was accidentally uninstalled.
computer #1: windows 7 hpcomputer #2: windows xp proI managed to lan cable connect and share folders/files between 2 windows 7computers. And the same between 2 windows xp computers.Then I wanted to lan cable connect and share folders/files between a windows 7 hp and a windows xp pro computerI tried for hours, running the same settings in circle.At a point it worked. But I don't know why it suddenly worked.The difficult thing was, to make the network icon appear on "the other computer".Do you have a detailed step by step manual, on how to config settings in
I connected two notebooks via a TP-Link router (Wlan 54g). The first computer is a brand new Samsung RF511 Windows 7 Home Premium 64bit with Intel I7, 8GB Ram. The second is a 5 year old HP Pavilion DV5000 device with Windows 7 Home Premium 32bit.
It dosent matter if i connect via Homegroup or direct over the network to the files. The speed of transmission between the two computers is about 3-400KB. Sometime, i get about 7-800 KB.
I have a network set up with file sharing. I use a Windows 7 PC to host files that are shared with around 8 other PCs - some on Windows 7, some on Windows XP. The file sharing works but sometimes some users are unable to get access to the files. The error message is something like \PCNAME is not accessible. The user can connect if the machine storing the files is restarted but it will happen 4-5 times during the day.
I have a 3 PC router based workgroup network. 2 PCs are XP SP 3, one PC is Windows 7 When all PCs are wired, everything works just fine. All PCs (W7 and XP) can see and share files with all other PCs (It took a bit of doing but I got there eventually)If I try to connect the W7 PC wirelessly,
* the W7 PC cannot access/share files on the XP machines
* the XP machines can see and share files on the W7 PC
* The W7 PC can access the router and can ping the other PCs
There is no firewall in operation on the XP machine What do I need to do to get the W7 machine to access/share files on the XP machine via wireless connection?
Alright I am running Windows 7 X64 Bit. I am running a Linksys AE1000 wireless adapter with a Linksys router with Comcast cable. Anyway here is my problem. Before I didn't have to configure the IP4 settings as it was set automatically obtain IP and DNS settings. But now I have to put in those values manually to get online because if I don't I get the unidentified network in my the network area.I have done the following setting adjustments:-Disabled the bonjour service.
Just reinstalled my windows 7 home premium after having some issues and thus far everything is working swell, except for the fact that I can't seem to find any wireless connections under connections available- I can't even seem to set up wireless connections.
I know nothing is wrong inside the computer since my splash top allows me to go onto the internet wirelessly- so I'm guessing this has something to do with me just installing windows 7 home premium again.
Without the internet I can't download drivers or get windows updates-
Looked in device manager and there are three exclamations next to these drivers: standard VGA Graphics Adapter Network Controller Unknown device
Can't seem to fix the exclamations since I can't get internet access (only have wireless net) Is there anything I can download and burn to get these drivers working?
(the bytes sent and received). It seems skype calls and watching in browser videos shoot them up into the billions after a few hours +. Upon googling around i am quite alarmed. Why did my network randomly change to "network 3"? A few weeks ago it just said 'network'?
A week ago I put together a new computer and installed Windows 7 Ultimate 64 Bit, every thingy installed just fine even the Ethernet drivers that came with the Motherboard disk installed ok, but I get 'Unidentified Network' for my network and only local connection. I have reinstalled the drivers many times. I am on another computer hooked up to the same router and modem, but it is running Vista instead, but the internet works just fine, and it is using the same cable as my other computer so it can't be the cable.
My computer Specs: AMD Phenom II X6 1090T Black Edition Thuban 3.2GHz MSI NF750-G55 AM3 NVIDIA nForce 750a SLI HDMI ATX AMD Motherboard EVGA 1GeForce GTX 550 Ti (Fermi) [2x - Sli] SAMSUNG 1TB 7200rpm Hard drive G.SKILL Ripjaws Series 8GB (2 x 4GB)
My network cards drop the connection and are listed as "unplugged" every time I game online, regardless of the game. I have 2 internal Realtek PCI GBE family controllers on an ABIT IP35Pro mobo. There is no set instance of why/when this happens only that it is completely random and I get the usual Event ID's in the system log after it happens:
The TCP/IP NetBIOS Helper service was successfully sent a stop control. The reason specified was: 0x40030011 [Operating System: Network Connectivity (Planned)] The Computer Browser service was successfully sent a stop control. The reason specified was: 0x40030011 [Operating System: Network Connectivity (Planned)]
There are no other events, Application or Security that happen right before these events other than MS Application experience service entered the stopped state in system log. It could happen every few hours during the day to every 5-10 minutes after midnight( this is what is very weird since it did not do this prior to midnight this many times ). I sit behind a uverse router with it passing through a gateway from 2 powerline adapters. I have no problems downloading torrents, watching movies or anything l else strenuous on the network, but gaming. The only fix I have found is to disable the card and re-enable every time.
I have tried the fixes below with no luck. 1) Disabled Computer Browser service 2) Disabled TCP/Ip Netbios Service 3) Updated Realtek drivers 4) Rolled back Realtek drivers 5) Changed IP address 6) Reset TCP/IP Stack 7) Completely blew out Windows 7 Home and installed a fresh Windows 7 Ultimate I had 8) Disabled windows 7 from shutting these cards off 9) changed power management to never sleep the system
Ok, I'm going to give a small amount of back story here as it may be relevant to the current problem. Yesterday I formatted my Win XP PC and tried to install Windows 7 on it. 3/4 of the way through the installation my PC would restart, and upon loading back into windows I would receive this error message:�The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click to restart the computer, and then restart the installatioThere were a number of possible fixes to this problem detailed hereI eventually got the installation to complete properly by removing my Sound Card and my Network Card.Ok, now onto the current problem. As stated, I have a new, clean install of Windows 7 32 which seems unable to connect to our BT Home Hub router. I have an ethernet connection to the router (lights: check, and cables are secure etc) and also a Wireless Network Card which may or may not be in a functioning state. By which I mean, I have had problems with it in the past but I can't remember exactly what is wrong with it. However, as I did with my XP install I want to connect via the ethernet cable.
In the Network and Sharing Center there are no networks listed.I have attempted to update the drivers for my MB and the Network Card, neither of which seemed to do anything.If I try to ping google or anywhere else it fails.This could end up being a very simple issue, but I'm completely new to Windows 7 (and skipped Vista) so I don't really no where to go from here, and am kind of burned out after spending 8 hours yesterday just installing windows.My PC specs:Custom BuiltOS: Windows 732bitMOBO: ASUS M2N4-SLICPU: AMD Dual Core 3 GHzGfx Card: GeForce GTS 250Network Card: Realtek 8185
Just recently I upgraded a friends computer to Windows 7 from Vista. It was really slow and clogged with random background tasks and it seemed like the best option at the time. Anyway, she just told me that now when she turns the laptop on and logs into her account, it logs her back off and shuts down. Specs (as far as I can emember):Intel Celeron(?) dual-core @ ~2.4GHz2GB RAMIntegrated graphicsWindows 7 32-bitThe laptop is between 3 and 4 years old. I only installed Avast and OpenOffice on it last night and it wasn't doing any of this. She also never turns her laptop off if that has any bearing on the matter. I'm having her run the Windows 7 diagnostic stuff right now so I will post later as to what she finds.
I am able to access the internet through my wireless work computer and xbox. my home dell laptop will not connect to the internet. It is showing that i am connected to the linksys but Access type says no internet connection. I have already tried and ran FSS.exe becuase thought it might be a malware issue.
i have problem to set up a new conection.please tell everyone how to set up a new connection.i cant make access my home network.After make new connection i see is public network not home network.i see there two connection there and in home network no internet access. how to make one home network connection.
i am thinking it it might be because i have bridged my connection for my 360, but i have a red x on my network connection but i still have full internet. i already searched and did many steps...even the cmd one but no luck. so could it be from my wired 360 via bridge connection?
I have no dump files because the comp crashes almost immediately upon reaching the boot screen, and I don't know how to access them without windows explorer. So, I wrote down as much info as I could. I've tried startup repair multiple times, and I've tried system restore, neither work. Startup repair shows that all system tests are successful up to the System File Integrity Check and Repair, then it fails and gives:Error code 0x490 Unknown bugcheck: Bugcheck 7E. 0x0000007E (0xFFFFFFFFC0000005, followed by 3 other random ones each time.)System Restore gives error 0x80070067When startup repair fails, and the option to send data appears, the following problem info is shown.
I was wondering if someone could help me out. I just recently installed a new copy of windows on my OCZ Vertex 3 90GB SSD. When the computer restarted to finish the setup, it gave me a BSOD for .5 second and then restarted my computer.I have it in my Bios that it's configured where it uses AHCI because for some reason IDE no longer identifies all of my SATA ports and what's plugged in them.I do not have a factory built PC. I have a Gaming Rig I've built myself. I'm simply at loss of ideas on how to fix this problem I'm having with this SSD. My stats are as follows:
I want to change DNS address but when in "Network connection properties" I select the "Internet Protocol Version 4 (TCP/IPv4) line the Properties button is not active and I can not click it to open and change the DNS address.Also I see now that Properties button is inactive for all the other lines too.. I can't find the reason of that..Did I restrict something by mistake? or is it another problem..I'm on Windows 7 Home Professional..
If I am connected to the network I am not able to logon. Once I disconnect the network cable I can logon and than I need to reconnect the cable again to be able to work properly.If I lock the screen and I want to unlock it again I need to disconnect the network cable to be able to logon.See the pic for the error messages: (its in dutch sorry)We tried to remove the object in AD and added it again but no joy. All accounts (also admin accounts) on the machine have the same impact