I'm not sure if anyone else has noticed this or whether it is a problem with my system but my windows key button seems like it is sticking. Normally, to use windows shortcuts you would do something like windows key+m to minimize all windows. Well what I find is that periodically the key seems to stick and if I type "m", for example, it will minimize all windows. Basically any key I hint will do whatever it is programed to do as a windows shortcut, if that makes sense. I know I can just disable the shortcuts but I was wondering if there was any way to fix this. Currently, when the problem arises I just hit the windows key button and it seems to reset it and everything goes back to normal. I didn't just buy the computer now. I had Vista on it before and never had any problem related to the windows key button.
For a little while I have had a problem with my mouse cursor sticking inside of windows and even icons on the taskbar. It shakes back and forth and won't allow me to move past the icon or window it's stuck in.This begins happening at random while I am doing "whatever". I haven't been able to isolate it as occurring when I am doing a certain task. I have already tried the following. (which everybody keeps telling me over and over)
1. Closing each program 1 by 1 to see if it stops.
2. Using a different mouse - Both do the same thing.
3. Rebooting - Real fun trying to save my work 20 minutes into being booted up when I can't even move from window to window properly.
4. Getting the newest mouse drivers.
5. Making sure that my graphics tablet pen isn't laying too near the tablet.
I recently upgraded from Windows Vista 32 bit to Windows 7 Home Premium 32 bit. Everything was fine and I liked it. Then it stopped registering the clicks from my mouse. I rebooted and it was back to normal. After a while it stopped again and I've been fighting with it ever since. It works about 1 out of every 15 reboots. I've tried rebooting with the dvd for windows repair, nothing. I removed wireless USB card and switched to ethernet connection, worked for a minute until next reboot. I've reinstalled windows (haven't formatted yet) to no avail.
I've tried and tried to contact windows for support, but can't find a phone number. When I try to go through the steps on their site, it says that my product ID isn't good for this country, yet I bought it at Best Buy here in Louisiana, and they want to charge me $50 to talk to me!! I'm fit to be tied!!
The one thing different that I did was, when I initially upgraded, I disconnected my backup drive since I didn't have anywhere else to back it up. I re-connected it once everything was reinstalled. For the life of me I can't seem to figure this out. If I have to format everything I will. I about to that point right now.
Alright, so recently I upgraded my windows vista laptop to windows 7 ultimate.Everything ran smoothly, except for now when I type, it will randomly act as if I am holding ctrl for short bursts, opening new tabs, windows, closing the browser, opening the find window, bookmarks window, etcIt never did this before I installed windows 7, and I checked to make sure my drivers are up to date, which they are. I've googled and tried many solutions, but none of them have worked. I am running windows 7 ultimate 34 bit on a Toshiba laptop, but that's all I really know.
I was infected by a virus. It makes the shift key get repeatedly pressed over and over. This happened to me before and I solved it by scanning with MalwareBytes and AVG. When I went to scan with MalwareBytes it needed updating, so I let it. Unluckily for me MalwareBytes thought it would be kind and restart the computer without my consent. Now, due to the virus, I can't login to my account to do anything, even in safe mode.
Sometimes i can browse fine all day and no issues,, some days like today all the sudden pages wont load clicking links doesnt work right or very well unless i close all the browser completley and then afte rthat bring up my task manager and end process on any left over iexplore.exe *32 processes. i run NAV and MalwareBytes and do not have any tool bars or spy ware.... Sometimes i just reset IE9 back to new but still eventually does this again.
I’m having some problems with keys sticking with windows 7 while playing games .
While in-game I have found that some keys "stick", the keys are NOT physically sticking on the keyboard but the effect is the same.
The effect is most prominent in 1st person shooters. When running around the keys will seem to stick. When letting go of a key (e.g. WASD, arrow keys, Ctrl and other common command keys) it is as though the key is still depressed for another 2ish seconds.
I first noticed this in old games such as Original Unreal Tournament and Quake 3 Arena (yes I am aware how sad it is to still be playing these games) but with further investigation I have similar problems with more modern games such as WarHammer 40,000 Dawn of War (plus expansions) although this seems only to be with command keys such as the Ctrl key.
I originally noticed this with the windows 7 RC version but assumed this was a bug. Since I have now upgraded to the released Windows 7 PRO I still find the same problems....
Anyone else discovered these problems?
The keys are NOT physically sticking on the keyboard
I have tried using another keyboard
and since writing this I have noticed the problem with the Ctrl key is apparent in FireFox aswel but I am unsure if this is a problem with other web browsers.
After new Windows 7 installation I installed Family Safety Live on 2 of my computers (I have a 3 pack Windows 7 Home).Every since installing Family Safety, when I click on Start menu it stays up for 2 seconds and disappears, which disables me (Admin) and all users from being able to use it all together. It's becoming very annoying.Family safety does have Program protection enabled with specified programs.I'm also running Program control within Windows 7 itself.I think it has something to do with Family safety but I went thru all the options and I couldn't figure anything out. I wonder if Family safety has issues dealing with 2 PCs, but I did notice that in the settings it recognized both computers.
Grandma's computer - trying to troubleshoot from Chicago for a computer located in California. About to kill myself. Please help.
Graphics card on computer is an integrated Intel G33/G31 Express Chipset Family adapter. I purchased a VGA splitter so that she can connect it to her LCD monitor and Plasma TV.
The monitor's native resolution is 1680 x 1050. HDTV is 1280 x 768.
My grandma complained that the resolution was messed up (I later learned that it was set to 800 x 600). I asked her to set the resolution to 1680 x 1050, but when she does, she gets the message that "the current input timing is not supported by the monitor display." I checked the refresh rate -- it was set to 60hz. None of the other 1.6 ratio resolutions would even show up on the available list of resolutions.
I had her plug the LCD monitor directly into the computer (sans splitter). No error message. The resolution stuck right away.
So, how do I use this splitter and still get 1680 x 1050 on her LCD? I don't even want to know what will happen to the TV's resolution when we do this, but I can pray.
I have had my HP Pavilion g6 Notebook PC (with Windows 7 Home Premium 64-bit Service Pack 1) for less than a year and I am encountering a ton of problems.Whenever I go to open a program, it unresponds for a short while before I can continue to use it.Sometimes my keyboard acts up, for e.g. if I were to press T whilst in an internet browser, it would open a new tab, as if I was pressing the CTRL button when I'm not.Sometimes my laptop shuts down - sometimes there is a blue screen error message before, other times it just shuts down without one.I have Trend Micro Tiatanium anti-virus protection and have done scans and nothing has showed up.
I reported this problem on the beta and hoped that it would be fixed by now in the RC.
I have a widescreen Hitachi plasma with a native resolution of 1024x1024. My HTPC is connected via VGA using 1368x1024 resolution through an ATI Radeon 4670 card which gives really excellent picture quality for live TV (with a few tweaks!). MC displays correctly full screen but I need to set it to Zoom 3 for live TV to remove the black bars top and bottom and fill the screen correctly for 16:9 aspect ratio.
The problem is that this setting will not stick and randomly changes back to Zoom 1 when I change channels. Sometimes it works and sometimes not regardless of content. Sometimes I can just see the picture change zoom an instant before the channel changes.
This is definitely a windows problem and not related to the graphics driver. I have used the driver automatically installed by Windows 7 and updated to Catalyst 9.4 with exactly the same results. WMP remembers the zoom correctly for DVD playback.
I have an identical setup running under Vista MC and the zoom, once set, always remains the same (Zoom 3).
Is there a way of making this setting stick as it should remain the default for all my TV viewing and I could not live with having to change zoom every other time I change channels? Any help would be much appreciated as without a solution I would not be able to adopt Windows 7 which would be a great shame considering all its other improvements over Vista.
Windows 7 synaptics left click acts like right click after reboot and the right click doesn't work at all. I've downloaded the most recent driver & searched for a solution online but haven't found anyone who has fixed this issue. Did everyone just give up or am I not patient enough & haven't dug deep enough. If I use a USB mouse there are no problems it just seems to be with the built-in after I've used the USB mouse.
I only learnt about this a couple of weeks ago!If you want to make the Aero Peek button at the far right of your Taskbar into a plain and simple Show Desktop button:Simply right-click the Aero Peek button and un-check the "Peek at desktop" option. Et Voila!! That's it!
recently I used a software AVG PC Tuneup and it has never been a problem for me until a couple of days ago when I decided to install it on my DELL. Now, I went to system advisory and did a system scan on recommended settings, I pressed 'fix selected' and my Wifi was disabled, I tried everything. I can't get my wifi to work without plugging in my modem directly ot my pc. I noticed my wifi radio was disabled, so I pressed the F2 button but nothing worked. I am trying to re enable my wifi radio / wireless radio connection button but it won't work.
My program intel my wifi utility tells me my wifi is disabled but I can't enable it.
System information Manufacturer: Dell PC Model: Inspiron N5010 System Type: 64-bit Windows 7 Professional Screen Caps
Ok so when ever i hold w button and pressing up button its not scrolling or not moving up i mean i play fifa 11 and fifa online i have w as sprint i cant sprint up.
I am using Windows 7 Pro 64x and apparently the default user account (Owner) that I use is not working correctly. Unless I have UAC set to Never Notify, I cannot open Control Panel or UAC again. I have created a second user account as Administrator and it works correctly.
I would like to know if there is any way to fix this problem short of a clean install of Windows. If not, is it possible to move all of my settings to the user account that works correctly and delete the one that does not.
When i press my left mouse button it should trigger another button on the keyboard, and as long as left mouse button is pressed they key on the keyboard stays pressed (virtually of course).
We are creating an image for our company and would like to incorporate a different start button if we can.We do not want a third party program that can change it.
possible to move the start button from the left handside to the righthand side without moving the taskbar (windows 7 pro). I have tried searching for the solution myself online but no luck
windows 7 start button cant be extended to where it says start in white letters and looks like the xp one can someone do a simple windows file 3rd party mod to allow that and then get the xp start button for me this seems like alot but i really want to go back to xp.
I want to add a button that creates a new text document and put it next to the New Folder button in Windows 7, so that clicking it will give me the same result as right-clicking in the folder and choosing New>Text Document.
I have read this page: Add a Custom Command Button to the Windows 7 Explorer Toolbar - Windows 7, Explorer toolbar, FolderTypes, command bar, custom button, RegEdit, registry, jscript, Dan Rollins
and this page: Adding custom buttons to the Explorer command bar � winJade
So ive got the button appearing, and i can get it to open the actual program Notepad, but not create a new text document inside the folder. I dont know if its just a variable i need to add onto the command line "c:windowssystem32 otepad.exe", or its a different command altogether..
On My X201 Tablet Laptops i have installed driver disc for the HP Officejet 6500 Printer.As soon as version 14.00 of the driver is installed on the machine upon restart rather than a username to click onto to login at Clt+Alt+Del a cancel button is displayed.I Can restart in Safe mode and remove the driver but it still has the issue.
