I have a new windows 7 laptop. I do not want my user account to have a password, however, I do not want anyone other than myself to see what I am doing. I have looked at hiding user accounts, however, in windows 7, there does not seem to be a way to access them. Is there some way to do what I want?
View 1 RepliesIn windows 7 profeessional three accounts have been created. one is default with administration privilage and two with normal user right.hen in registry:Hkeylocalmachinesoftwaremicrosoftwindowsntcurrentvirsionwinlogonnew ragistry named SpecialAccounts and there under UserList is created.In user list the other two user's names are saved as Dword value.But when at winlogon Control+Alt+Del pressing the welcome screen is not changed.
View 9 Replies View RelatedAs the title implies, how can i hide user account on log-on screen and useCtrl+Alt+Del key to unhide the hidden user account like on Windows XP..
View 2 Replies View Relatedi start my pc up (from being off) and get logged into a temp user profile. It tells me that i cannot acess my user profile and all information will be deleted on logging out. I've looked online for a soloution but none work for me ,I really dont know how to resolve this problem,I have limited knowledge and computer skills. i really dont want to scrap this drive and start over.
View 15 Replies View Relatedlosing access to your Administrators account I figured now would be a good time to setup a secondary FULL Administrators account. I have done that.
But what I'm looking to do is HIDE that secondary account from the welcome screen and if I need it hit Ctrl+Alt+Del to get to the old style log on screen and type in the secondary user name and password.
In XP it was easy to hide user accounts from showing on the Welcome screen with the Powertoys add on. I'm not finding it that easy in 7. In fact most of what I have read states that the only way to do this it to set the account as NOT ACTIVE. I don't want to do that. I want it active I just don't want to see it on the Welcome screen.
how would I do it? The account would still be usable for it's privileges, granting access for standard users when necessarily, but not be visible at logon.
View 3 Replies View RelatedI am using Windows 7 Pro 64x and apparently the default user account (Owner) that I use is not working correctly. Unless I have UAC set to Never Notify, I cannot open Control Panel or UAC again. I have created a second user account as Administrator and it works correctly.
I would like to know if there is any way to fix this problem short of a clean install of Windows. If not, is it possible to move all of my settings to the user account that works correctly and delete the one that does not.
I'm hoping to teach Mum how to use my PC in the near future and she will only be using it for typing etc and maybe the internet. Also she only use it sometimes. shall I create a Limited User Account for her or turn on the Guest Account?
View 3 Replies View RelatedI would appreciate any help identifying the cause of extremely slow log on times for a user account on our family laptop. The machine is running Windows 7 - 64-bit version, and currently has 3 users accounts 2 admin and 1 regular. The regular account has begun to experience log on times that last for minutes (The Welcome splash screen prior to log on screen), while the admin accounts have no problems. I have seen other posts regarding slow log on times, but I haven't seen those which address the issue for a specific user account.
View 5 Replies View RelatedI have always been running admin and even until now I run as admin. But, I have been doing a little bit of research and realize that using a standard account is a safer practice. I have never even used a standard account.Is using a standard account a better practice? Also, how does doing average task such as installing programs and updating work through the standard user account?
View 4 Replies View RelatedHow to Unlock a Locked Out User Account in Windows 7 ?
View 0 Replies View RelatedHow to change a power user account to administrator account
View 2 Replies View RelatedWindows 7 has sure made this administrator account complicated. You create a default administrator account when installing Windows 7. Ok, that seems easy. Then for security and daily use you create a Standard account. Ok, only a little less obvious. But then it turns out that there is a hidden Administrator account that is disabled by default. What does that mean? Not so obvious.
Now, I had a reason to activate the hidden account. Definitely not easy until you search the forums and go through some procedures. Unfortunately, when Windows starts up, there are now three accounts showing, eg., JohnUser, JohnDefaultAdmin, Administrator.
Next step, to make the Administrator account not so obvious, is even more complicated. Figure out how to get NO accounts to show at logon. That is, revert to the old NT clt-alt-del panel where you have to enter both account name and password. (Also disable Show last logon name.) More complicated, but I got there, too.
I thought I was done. But nooooooo. Anyone who pratices safe computing by normally using a standard account knows this drill. You try to run almost any program, or download an update, etc., and you are asked for the password of an account with admin rights. What happens? You get a dialog screen that shows the name of every admin account. In this case, it would show JohnDefaultAdmin and Administrator.
I cannot find any way to enable the Administrator account and have it stay hidden in the circumstance described above.
Incidentally, the reason I needed the hidden Administrator account is that it appears to have some powers that the default administrator account does not. In my case, it was the ability to create a rescue disk without getting the widely-reported (0x80070057) error.
I am using a windows 7 Home prem. 64bit I want a computer with no administrator privilege. The start up screen should only show one standard account. There should be no other account to see when I start up the PC.
And when the standard account wants a admin privilege, a box should appear where I can type in the password.
What I tried was activating the default administrator account by "net user administrator /active:yes". After setting the password I deactivated the admin account inorder to hide it at the start up screen. But when the "standard account" wanted to use the admin privilege it asked for the password with no field to type it into. Apparently disabling the administrator account means; not able to use the admin password either. I had to restart the PC in "Safe Mode Command Prompt", go into the admin account, activate the admin account(net user administrator /active:yes), restart the PC and so on.....
Long story short; I don't want to have the admin account to be like "IN YOUR FACE" when ever the user "STARTS UP" this computer.
I have 3 accounts, plus an administrator login (in an educational environment).
Does anyone know how to hide the Administrator account on the login screen but keep it enabled?
I found this article, but it doesn't achieve what I was hoping for.
Displaying only 1 user at the login screen.
And why doesn't crtl-alt-del not work anymore at the login screen?
I was just in Windows Explorer, planning to modify my Startup programs. Navigated to "C:/ Windows7_OS / Users" and right-clicked on my User Profile "Bill". From the right-click menu, I selected "Properties", and then on the "General" tab, there is a checkbox under Attributes called "Hidden". I thought, "oh great, I will check this and then I will be able to see all of my hidden files".I selected "Hidden", and clicked "Apply".Now my User Profile "Bill" is hidden, and I cannot figure out how to unhide it. Everything associated with my User Profile is now hidden application shortcuts, My Favorites, etc.Can anyone tell me how to "Un-Hide" my User Profile?
View 7 Replies View RelatedHow do I map existing User Folders to a newly created User Account?I had existing User Folders on drive D. I added a new drive C and installed the OS on C but changed default location of User Folders to D. Now my existing User Folders are in the Users folder on D but there is no User Account associated with them. If I create a user account with the same name will it map to the existing folder within Users?I did a test of this. I created a folder called Test within Users then created a User account called Test and logged in. It created another folder within Users called Test.Computername.
View 2 Replies View RelatedI am the primary user of my computer and would like to see only my icon at the Sign On screen. There are 2 other infrequent users and I would like to hide their icons and just show mine. Recently on two occasions when I booted up the Sign On screen had only my icon and I was pleasantly surprised. I was not aware this was even possible, and still do not know what I did to make this happen. It seems to me that there is a way to adjust the software to make this happen at every boot up. I spent hours seaching this site but could not find any information on how to accomplish this.
View 1 Replies View RelatedI have laptop gifted to me, with a user name which I want to change.I have the following steps in mind:
1. Create a new administrator account
2. Copy the profile from old username to new user.
3. Backup the entire registry.
4. Edit the exported .reg file to find and replace old user with new user.
5. Login as the new user.
6. Delete old user
7. Restore the new (edited) .reg
I set up four Dell Computers with Windows 7 Home Premium. Used my administrative account to install software (Microsoft Office Suite), Microsoft Security Essentials, Ccleaner, and Malawarebytes. All programs installed properly. As these computers are going to be used in a public place by junior and senior high school students, I thought it would be best to set up a standard user account for each of the four computers. I have it set up but when I log in as a standard use (non administrative) all the programs that were installed are not available. Tell me if I'm wrong. I think the programs would still be listed in program files when the standard user is open. Can I go to each of the programs and right click to open and then be prompted to key in my administrative password. I would think this should allow the program to be run in the standard user desktop.
View 1 Replies View RelatedI've tried to search this but have had no luck. My wife's computer has XP Pro 64-bit installed and she wants to try (again) to upgrade to Windows 7. I have 2 hard drives for her computer, the one with the XP OS is installed and the other with Windows 7 is waiting to be installed. I only planned on installing one HD at a time, but if I can install both and copy her user files and emails from one HD to the other, that would be an option too. Eventually I want to have just the Windows 7 HD installed and archive the XP HD in the safe.Several months ago she wanted to try Windows 7 but I anticipated that she may want to switch back to XP if she didn't like the new system. I bought a new HD and installed it in her computer, then installed Windows 7 Pro on it. The new system works fine and was updated to a current state as of several months ago. I realize there will be lots of Windows 7 updates to install, and I'm willing to spend the time necessary to do that. However, I'm looking for a short cut for installing all of her personal settings and Outlook email files from XP to Windows 7. I'm thinking that I could copy her entire User file from the XP system and after Win 7 is finally updated and current, paste that User account into Windows 7. MS Office 2003 is already installed on the new HD. I realize it won't be a 100% "one for one" swap and that I may have to tweak several settings from her XP User account, but is using the XP User account even feasible? If I can't paste her XP User account, can I copy her XP Outlook PST file onto a flash drive and then paste that PST file into Windows 7? I don't see why that wouldn't work, but there are a lot of issues that I'm not aware of. Does anyone have any better suggestions on how to import her personal settings and emails into Windows 7 on the new HD? P.S. I didn't realize this was my first post. I've been lurking and reading for quite a while. I live in the Largo, Florida area and have been very active in computers for several years, but just recently upgraded to Windows 7 on my personal computers. I'm getting more comfortable with Windows 7 each day, but now that I've broken the ice with this first post, I hope to become fairly active. I hope that I can eventually contribute to the forum. I'm glad to be here!
View 5 Replies View Relatedhow I can run a program, Core Temp.exe, on Windows 7 without having to manually enter the admin password and manually run it after logged in.I tried 3 ways:
1) Run as Admin Went to both the shortcut and the program location -> properties -> "Run as Admin" ---> didn't work Also checked "Run in Compatibility mode for windows 7" ---> didn't work
2) Task Scheduler Use Task Scheduler to run the program at startup---> didn't work run whenever any user logs in---> didn't work run whenever I log in ---> didn't work All of the above triggers at once ---> didn't work
3) Registry Editor Local Machine -> Software -> Microsoft -> Windows -> Current Version -> Run Made a string to run the program ---> didn't work All I want is this program to run whether I'm logged into any account. Specifically, my Limited Account so that I can monitor my CPU temperature and usage. It works after I run the program manually, this pops up "do you want the following program from an unknown publisher....", and enter in my admin password, but this is tiring.
what is power user account in windows 7 ?
View 2 Replies View RelatedIn this tutorial, it's time to take a look at the often unfairly criticized User Account Control security mechanism. User Account Controls (UAC) were introduced in Windows Vista and were immediately unpopular with users migrating from Windows XP. However, they drastically improved security and when used in conjunction with limited user accounts, can actually save a great deal of time, as we'll demonstrate in the video.
View 0 Replies View RelatedRecently I bought Toshiba Sattelite C670-1DJ and today I accidentally unplugged my AC cable. So I started it and it started computer with "Starting your computer for first use" or something like that.It logged in temporary Administrator account and when I tried to switch to my account, it wasn't there, however there is my folder in C:/users.I tried to reboot computer and edit registrs(I am a begginer in Windows, so i didn't try to do something extraordinary) but nothing help, i cannot log in my account.
View 1 Replies View RelatedI just bought this about two hours ago. If even that long. & it seems that when my built in webcam is turned on if I don't take pictures routinely it logs me off. It only happens when the cam is on. Is there a way to stop this? I'm trying to play around with the options and what not but its quite difficult to do when the computer keeps logging my account off. Its Windows 7 Home Premium 64 Bit. Its made by HP. The box says "Pavilion dv5. dv5-2074dx."
View 3 Replies View Relatedwhen I turn on my computer, or bring it back from sleep mode, there are two of the same account. Basically it shows the user boxes with the same name twice, (both with the same password, picture, etc.) It's not really a problem, just kind of annoying to me for some reason.
View 2 Replies View RelatedRecently I bought Toshiba Sattelite C670-1DJ and today I accidentally unplugged my AC cable. So I started it and it started computer with "Starting your computer for first use" or something like that. It logged in temporary Administrator account and when I tried to switch to my account, it wasn't there, however there is my folder in C:/users. I tried to reboot computer and edit registrs(I am a begginer in Windows, so i didn't try to do something extraordinary) but nothing help, i cannot log in my account. I need to get in my account, there are few specific programms that won't run.
View 1 Replies View RelatedI have Windows 7 account named Joe and it is an Administrator. Whenever I try to open a program or shortcut I get the "Open with..." dialog box and my option is Internet Explorer. Another odd thing that I discovered is that if I right click and select on "Run as Administrator" a program or shortcut will open as it should.I also created a seperate Administrator account named Jim and everything opened normally.
View 3 Replies View RelatedMy brothers laptop has apparently deleted his user account and so he cannot start it up? Im not sure about the details tbh, hes running Windows 7 on a Dell laptop and he still has the installation disc and stuff. All hes told me is that his account has been deleted and so he cant start it in normal or safe mode.
View 9 Replies View RelatedThe other day I had to access User Account Controls because I was having some problems with Itunes and when I tried to open the Configure User Account Controls panel, a blank window opened for about 10-20 seconds and then it closed on its own. This kept happening even after I had restarted the computer. Also, this is the only thing with which this happens. Everything else opens perfectly.
I've been looking around for a while now, in other forums and costumer support, and I couldn't find anyone with the same problem or any thread addresing it.
I have a Windows 7 Professional, 32bit and I was using the Administrator account when this happened (it is the only account in the computer).