When I Put Usb Window Doesn't Recognize It
Mar 24, 2012When i put the usb window doesn't recognize it what to do
View 1 RepliesWhen i put the usb window doesn't recognize it what to do
View 1 RepliesWhen I try to use something on Internet Explorer that requires Flash, it always says "Flash Version 9.0 or greater is required.." But I always keep my Flash updated. Right now, it's Flash Player 11.
View 5 Replies View RelatedI assume I have a hardware problem with my DVD RW DRIVE (E) and will have to spend money to fix it or most likely replace it, but when i insert a cd into it i can hear the noise of what sounds like the driver trying to read the cd but thats it... nothing else happends. I have a dell M1330 XPS (5yrs old) using Vista 32bit. The drive is MATSHITA DVD +-RW UJ-857G ATA and its status is "This device is working properly." (which i certainly take issue with).
View 6 Replies View Relatedi just installed win7 64-bit. i have a core i5 with 8GB RAM. the computer doesn't seem to recognize all 8GB. it says there is only 4GB installed. i thought that win7 could go way beyond the 4GB limit of vista. does anyone have any suggestions on how i can get my pc to recognize and utilize all my RAM?
another thing i noticed, is that win7 seems to run my GPU (Nvidia gtx 260) hotter. its running at idle with limited apps at ~38 C compared to vista which ran at 33-35 C. anyone know why win7 runs "hotter" than vista? i thought it was supposed to be more efficient?
How do I get my Windows 7 to read both RAM 1 gig each. total of 2 it only recognizing 1 gig?
View 2 Replies View RelatedI have been using my WD External Hard Drive in my new Windows 7 desktop. Everything was working fine until this morning, my external HD stopped responding. Everytime I connect external HD to my desktop, I get " You need to format the disk H: before you can use it".
I've tried changing the drive name as well but with no success.
Windows 7 doesn't recognize my D partition though windows XP used to recognize it just fine on my computer, and it also used to work fine on that HDD using that same version of windows 7 on my old computer. My computer is a Dell Optiplex 745 and my HDD is WD10EARS (No Jumpers is being used) Here is a Screen of the installation Process
View 2 Replies View RelatedWhen I insert a disk, the OS reads it correctly, and I can do whatever with it. However when I remove it, Windows still shows the disk is inserted, and inserting another disk causes any program that tries to access it to hang indefinitely (including individual windows explorer instances).
After several hours of google and trying various fixes (including removing the drivers for the dvd-drive and ATA Channel 0-5, disabling windows native burn capabilities, uninstalling CyberLink PowerDVD 8 and Nero Express 9, and everything in this thread), I've got it so that the drive recognizes a single removal of CD/DVD and insertion of a new CD/DVD, however the second time it still gets stuck.
I'm on an Alienware m17x with a TS-T633A DVDRW.
Most of CDs and DVDs are working fine, but there are some which my DVD RW doesn't recognize. When I insert them, it doesn't react at all or it says that CD/DVD is blank. These CDs and DVDs are working without any problems on my old computer with Windows XP and also on my brother's laptop with Windows XP.
View 4 Replies View RelatedI am trying to upgrade my dad's Dell Inspiron 530S to WIn 7. I have chosen removable from the boot menu for the 1st 2nd and 3rd options, but the USB keeps getting passed over on start-up. I cannot see any menu functionality that lets me add USB. Right now removable is listed as floppy disk. He is on BIOS 1.0.13 (just upgraded to 1.0.18 same issue) running Win XP service Pack 3.
View 7 Replies View RelatedI'm trying to do a clean install of windows 7 (by booting the computer into the CD) but no drives show up. This usually happens to me so no big deal. The problem is.. recently I got a "new" computer, made out of old parts of other computers. SO i have no drivers CD.. So i have no SATA drivers...I tried to download about 30 so far with no luck. Simply because I have no idea what I should download.I simply don't know if sata drivers come from the HDD i have, from the motherboard, from the chip of the motherboard.. i have no clue.Here's my computer info you may need:I've seen posts saying to in the bios change from whatever I have to IDE or to something else, but I have no clue what that does so i would rather avoid it if possible. If there's no other solution, what does it actually do if i change from SATA to something else? (if its even SATA what I have).
View 9 Replies View RelatedI can install the software perfectly in whatever compatibility mode or none at all but after installation it still says "unknown device" in the device manager.
I have the WG111v1 but I also tried the WG111v2 driver which makes no difference except that the last step where i need to connect the device takes forever because it can't be found.
I recently installed Windows 7 Ult. 64-bit on my new Asus G50vt-x5 laptop. I am unable to get my Officejet K60 to work with it, though every website I've gone to says that it should automatically show up when it's plugged in. The printer still works as a standalone copier, and it worked with my previous computer -- an Xp Pro system.
View 9 Replies View Relatedmy laptop is saying tit doesn't any longer recognize the USB for my mouse,,does this mean the mouse is fried?
View 2 Replies View Relatedhave an acer veriton, trying to hook up an external cd/dvd drive.
View 4 Replies View RelatedWindows 7 doesn't recognize my WD HDD during installation?trouble shooting:This is what i did..... I took a laptop hdd and placed it into my desktop. I booted my desktop with the laptop hdd. I then placed the WD HDD ( the one that i've been having trouble with) as a second hard drive. I noticed that windows recognized the WD HDD and could write to it. I also reformatted the WD HDD. I then tried to run the windows installation from my laptop hdd so i could install it on my WD HDD and once again it didn't recognize it. I thought maybe i could clone my laptop HDD to my WD HDD with Acronis "clone software" and it couldn't recognize the WD HDD as well. This is frustrating...... Why can i write to the WD HDD but cant install the OS.
View 2 Replies View RelatedI have an OCZ SSD in my system. It works fine, I have tested on it other systems, and I am able to install Windows XP and Ubuntu on it. When I put in a Windows 7 disk it does not show my SSD. I have 2 different disks and both have the same problem. One is an old disk without SP1, one is a new one with SP1. I have tried different SATA wires and different SATA ports all tested and working on both other systems, and the same system under a different OS. Running in either AHCI or RAID doesn't let my system start from disk. When I click Custom and get the the screen where I partition my drive it does not show anything. It is completely blank. Despite the fact that my drive works under every other circumstance I can create.
View 4 Replies View Relatedso every time i turn on my computer there's a black screen and all these words pop up and one that caught my eye was the one that said keyboard error or keyboard not detected. Which was really strange I thought it was the batteries so i changed them twice and i kept turning it off and on i'm using a logitech mk710 keyboard and i tried everything nothing's working my computer doesn't turn on only that black screen shows..
View 1 Replies View RelatedMy computor was in sleep mode. A kid pressed the button on top and it shut down. When started the welcome screen came up but will not accept password ?
View 5 Replies View RelatedI am running an HP Compaq 8510w with Windows 7 Enteprise. When I first got the laptop the USB ports didn't recognise devices when they were plugged in, and the laptop would just hang when shutting down (on the Windows Shutting Down screen), so I decided to reinstall the OS as there was a lot of unnecessary applications installed.
I've been using the laptop since the rebuild and all has been good, until the past week or so when the same two problems have materialised again - when I attach a PSP, or a printer via USB, they are not recognised. And when I shut the laptop down, it hangs on the Shutting Down screen.
What checks can I run to see what the cause of this might be? I've not really installed a load of software on here, and I can't think of anything specific that I may have done that would cause this...
I have an external USB drive attached to a Windows 7 Ultimate box. The USB drive has video files that I stream to my Samsung TV using DLNThe setup works except last night when I copied over .MP4 files to the USB drive. For this file extension, the files did not show as playable over DLNA. Is there a way to enable the setup to recognize this file extension?
View 1 Replies View RelatedI have a umax powerlook 1000 with large transparency adaptor. It previously worked on my win 2000 system but i had to upgrade to win7. I tried changing the compatibility tab to win 2000 and loaded the magaiscan 4.7 which runs but the computer simply can't find the scanner.
View 2 Replies View RelatedMy computer doesn't recognise my password anymore. I can't reset it. I'm locked out!What's more, the arrow to the left above the Enter Key and the Delete key are adding dots in the password box instead of deleting them.
View 2 Replies View Relatedlooking for dvd rw driver for my dell optiplex 330;hl-dt-st dvd=_rw gsa-h73n ata device. not reading all cd/dvds since upgrade to windows 7
View 1 Replies View RelatedI have a Windows 7 Disc that I've used in the past, but I'm planning on building a new rig in about a month or two and I'm just planning a little bit. So my problem is that my computer doesn't seem to recognize my CD during the boot. It use to ask me press a button to boot from CD but no longer does and but I can run the CD after my computer has booted to my desktop so that means It can't be the CD nor the CD drive correct? I do have the boot order set for the CD-ROM first.
View 13 Replies View RelatedMy mother asked me to fix her computer, his window XP is badly corrupted, so I tried to install Window 7 on her computer. However, the hard drive didn't show on the screen. I found it quite odd because BIOS detected it as IDE driver, and it's a SATA driver. I tried to install with old Window XP installation CD. Same thing, doesn't show on the window XP installation screen either.
I tried to hook hard drive on other computer, and was testing with Window 7 XD and see if it was working, and it did. It shown on the disk screen. My guess that it's probably the BIOS that occurred, or perhaps other things. I have one hard drive, nothing more.
Anything that I plug into the usb ports isn't recognized on my computer. When I plug something in, my computer doesn't make the usual "bloomp" sound and nothing pops up. When I search for my usb in my computer, it's not there. My computer acts like I didn't plug anything in.
View 4 Replies View RelatedI have been looking for a Windows 7 driver for a NVIDIA Geforce Go 6800for an Alienware Area-51 M7700 laptop. Every driver that I download from NVIDIA's website gives me the error message during the installation that it cannot find a
driver compatible with my hardware. Windows 7 has installed a generic "standard VGA adapter" which does not allow for aero functionality
My computer is supposed to have built-in Bluetooth. The Asus website has a driver update for Windows 7 64-bit, but when I try to install it I get a message that no Bluetooth device was detected.
View 2 Replies View RelatedI built a new computer. Rather expensive, but it should perform well. -Anyway-, I bought a brand new hard drive with the expectation of installing windows 7 on it and then working from there. The hard drive is recognized in the BIOS, the CMOS, and anything at all I've checked, but when I put the windows 7 64 bit disk in and try to do a custom install, seeing as I have nothing on the disk from which to upgrade, my hard drive does not show up in the section in which 7 asks where I want to install.
Motherboard is GIGABYTE GA-X58A-UD3R LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard, hard drive is Western Digital Caviar Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive.
The hard drive is plugged into the top SATA port (It has like, 10).
What can I do?
I just installed a new copy of win 7. My computer doesn't recognize my printer or ethernet cable. What drivers do I need? Any special order?
View 6 Replies View Related