i'm trying to install at bios and easy tune 6, but for some reason it comes up saying open driver failure, or open driver handle failure. what do i do?
"Open device failure/ open driver handle failure" message when installing gigabyte utilities. The install fails. Does anyone know what might be causing this message?
the newer smart phones have nice powerful processors in them so I was wondering if the DAC (Digital / Analog converters) in these are as good as the ones in a typical LAPTOP computer set up -- bog standard on board sound from a laptop computer -- not high end specialized studio stuff etc.My Galaxy III S phone can play FLAC files and plugging the output into a DECENT set of speakers appears to me to be just as good if not better than the same sound played from the computer - a relatively decent laptop computer (Sony VAIO VPCEH with Intel I5 processor). I tested this by connecting the phone DIRECTLY to the pre-amp with the music on the phone's micro sdhc card. Had I done it via the USB then that might have needed another DAC conversion so the test cases wouldn't have been the same.I use a phone app WINAMP PRO (just like the PC version) so I can use Folders / directories to play the music and it can play FLAC too -- a lot of music phone apps lack this facility which is a shame. I like also the "play by folders" too -- as I have a lot of Audio books -- saves endless tagging and creating playlists / albums. --Just point winamp to the directory / or file and play it.I find also streaming music from the phone to the receiver device seems to work better than messing around with pc software too -- especially on a laptop.Another app here -- OrangeSqueeze in conjunction with SQUEEZEPLAYER -does the job of the logitech squeeze server on the laptop. The phone will stream music from a Network (or any acessible drive) to the player device(s) -- no prob but use the Wifi on the phone --not the DATA content from the phone company !! otherwise your Bank balance will diminish faster than Spain's Economy.
I used to be very sceptical of smartphones --even have some posts on the forum saying I'd never buy them -- however I have to eat my own words -- the latest crop with the latest Android version are incredibly useful now and possibilities seem quite exciting with what you can do with them.Seems to me that we don't need to do much Multi-media streaming from Windows 7 in the future as your phone will handle it. Perhaps Ms is getting this right by gradually withdrawing a lot of multimedia in the standard version of W8.
Starting about a month ago, after six to seven months of my laptop working fine, I've been getting video and audio stuttering whenever gaming or watching most HD videos and after messing around with my drivers I realized that whenever my Realtek HD Audio drivers are disabled my video runs flawlessly, but when enabled both video and audio stutter. I'm using a Sony VAIO laptop so I'm assuming that the sound card isn't easily replaceable. I've tried using the newest drivers straight from Realtek's website and also the outdated driver provided by Sony's website, both of which result in the same stuttering. Sony has also replaced the motherboard once and it did not resolve the issue.I'm currently running Windows 7 with 6gb of RAM and an NVIDIA GeForce 330M graphics card.
Yesterday when I got home I could not get my headset working on my PC. It's a USB headset (Tritton AX720) but it works perfectly on my Xbox 360. There is sound coming from the headset but it is really quiet. My speakers to my computer work fine, it's just when I plug the headset in I'm not getting sound. I was working on it for about an hour last night and I can't figure out what is wrong with it. So far I've tried to make it my default audio device, I did a system restore to a few days ago, and messed with the setting a little bit. This headset has worked on my PC for about 6-8 months up until yesterday. By the way my audio for my computer is still working perfectly. It is only when I plug my headset in that it isn't working properly. I'm completely lost on what is wrong.
how i can reinstall my main audio drivers so they stay installed and so i don't have to uninstall and reinstall them at every startup. it still says it's in use if i try to test it before reinstalling. to reinstall it i've been going to playback devices, right click properties, click properties on the new window, change settings on the next, last window click the driver tab and uninstall. then i go to device manager and scan for changes. it's really a pita DISREGARD THIS: ok so i've been trying to port audio from firefox to reaper + asio4all and found that i can do it with VAC. i first tried another program called virtual audio streaming but that didn't work. when i got VAC i uninstalled VAS first. since i've had VAC installed i can't listen to anything over my monitor's speakers (have computer hooked to monitor with hdmi). if i have "Digital Audio (hdmi)" set as the default audio device, the audio won't even start. for example if a start a movie in vlc and then realize there's no sound i can't just switch the default device to something else (usually can do this) i have to stop the video select a different device and start the video again. flash stuff online just won't play until i change the device. if i try to go to the properties of "Digital Audio (hdmi)" > advanced > and hit test it tells me the device is being used by another program. this was making me think that maybe it was because VAC was using that device to port the audio from windows or something. didn't really make complete sense but i uninstalled VAC, restarted my pc and it still does the same thing. i tried uninstalling the drivers (windows default drivers, the downloadable drivers IDT high def audio cause problems with other programs so i don't use them and would prefer not to) and restarting so they would reinstall but that did nothing.
I have three audio devices on my pc (ATI HDMI, Via HD onboard and steelseries usb soundcard) and through all devices I only get audio out of the left channel. I have tried two pairs on headphones and my tv speakers all with the same results. I have looked at all the balancing end everything is set to even on both channels.
Windows 7 X64 ultimate M4A78 PRO Mobo Via HD audio Steel Series Usb SoundCard
I have a HTPC setup. PC includes an ASUS MB with on-board video and audio, including options for either separated analog 7.1 audio out or HDMI out (among other output options). Current setup routes Audio and Video via HDMI to Pioneer VSX-1020 A/V receiver, and routes video from there to HDTV via another HDMI cable. OS is Win7 Ultimate x64, w/SP1.
Exact model for mb is here: ASUS M4A88TD-V EVO/USB3 AM3
When I play audio files, the receiver can fake the signal into all 5 channels (I don't have a sub, so the .1 is not relevant here), so there's no issue of the receiver not accessing the available speakers.
The main issue is this: When I look into the Sound Control Panel, under Playback Devices, the active/default device is ATI HDMI Output. Also listed are Speakers (not plugged in), Realtek Digital Output and Realtek Digitial Output (Optical). I do not have any analog cables plugged in, nor do I have an S/PDIF (optical/coax) connected. The HDMI works, but only gives me the option of Stereo (2ch). When I go to the Configure screen for the ATI HDMI Output, I see a list of Audio Channels, but that list ONLY contains Stereo.
I recently changed my case and MOBO to a G41M-Combo (Intel). Ive never used front panel before due to not having the option on my sound card. Now that i have this new MOBO it has on board HD 5.1 so im using that to save room on pci slots.I have the options set to notify me when 3.5mm is inserted and the same for front panel, and also have set redirect headphone and to mute speakers when inserted.When i insert my headphones to front panel, I have no notification and speakers dont mute. Also the port doesnt light up to indicate its in use and the sound is extremely quiet. Ive tried all i can think of. I have newest drivers, checked bios settings and played around with audio settings with no joy.
I first noticed this problem when I tried to open iTunes and it came up with the message 'iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly'. I also cannot listen to music or things online either.I have looked at my computer's device manager and can't find any catergory such as 'sound, video and game controllers', which one site suggested to try and check the sound card. I have also tried to update quicktime but that did nothing. I have also tried looking at 'sound' and under both the playback and recording columns it says that there are no audio devices installed. THis appears to be the common phrase along a problem with the audio configuration. This has not ever happened to my computer before and I have had it for about 3 years now. It is a toshiba laptop with windows 7 home premium.
I turned my computer on to find no audio playing. My main audio device plays bac audio from DAW just fine but if I load a video in WMP i get a code C00D11B1. If I try to play a test tone in the sound settings I get "Failed to play test tone". I have other audio devices connected and also get the same errors which makes me think this is a registry error or some windows communication error. The only thing I think might have caused this is when I was trying to get my ram to run at 1866. This is a new build and the ram should run at this speed as it is in the QVL but that is another issue. I should also mention that I have tried reloading the device drivers, updated the BIOS, and restyored windows from a previous state with no change.
Asus sabertooth 990fx Fx-8120 4x 4gb g skill Sniper Visiontek HD 5770 2 seagate barracudas in RAID 0
I'm having problems with my sound, I'm getting a very loud buzzing sound and nothing else. My computer is only a year old (self built) and I have never had this problem before, I got home from grocery shopping and it was buzzing.
What I did to try and fix it:
- thought headset was broken, used speakers, still buzzing
- used windows troubleshooting, said my port wasn't being detected, fiddled with it a bit and tried front ports. front ports causing buzzing as well
- checked for driver update, nothing
- uninstalled driver (buzzing stopped)
- re-installed driver and buzzing started again
So, i do think the problem is the driver, but i have no clue what to do about it.
so i have a desktop running two monitors one via hdmi one via dvi i have my main desktop on one monitor to do internet Internet etc. and run stuff like movies games and stuff on the other. can i run two sets of audio one from the audio jack on my pc one from the hdmi to the screen? if not is there any other way to accomplish this?
if you need more info for example my pc setup just ask.
I have a m-audio 1010lt audio card which im trying to setup with my virtual XP for my DAW program. And I installed the drivers on my Virtual XP and yet it still won't work.... all i have is a stupid sound-blaster option in sound settings which i don't have or want as i need a high quality thing for recording. why won't these drivers work yet will normally work on XP ?
I connected a 7 port hub up to my laptop and now my USB ports are messed up.The 2 ports on the left side have sensing but no power out. The port on the right side has power out and sensing but anything plugged into it after plug-and-play has down its number is installed incorrectly, (has an error doesn't work). The computer is a new HP G7-1365dx laptop windows 7 Home premium.
After having set up XP in virtualisation mode and had it working more or less satisfactorily. Even got a USB sound card working. I find today that after getting into it, a major programme would not launch.
I launched a second one, which ran but which locked up and could not be stopped.
Exit XP. Reboot the Windows 7 machine. Start XP, get error "Terminal connection is busy processing another connect operation" followed after a time by the login screen.
Enter password and get the same error.
One time I did get into XP, but every app lauched gave error "App failed to init as the window station is shutting down". I noticed that the locked-up app from the first session was still on the taskbar and still locked up and unable to be stopped.
I have a problem, when I try to run a certain program it has an error, that prjChameleon.ocx or one of its dependencies are missing.. So I downloaded prjChameleon.ocx and put it in my System32 folder, but still no luck, says it will not work.. Further studying I found out that I needed to register it.. So I went to Start>Run> regsvr32 C:WindowsSystem32prjChameleon.ocx
I recently received a virus that did a plethora of things and one of them was trying to delete system 32. To counter this I tried to reset my comp to a previous date. After pushing it to the farthest date and still dealing it I decided to reset to factory default without backing up any files. Everything goes great but when it starts installing the service and the OS it says the installation can not continue and the comp must be restarted. My comp is a HP TouchSmart 600 PC running Windows 7 Premium 64-bit. I have disconnected everything from it and tried running it on safe mode but I do not know how to restart it without pressing the power button but that just ends everything.
ISSUE: GRMCULXFRER_EN_DVD FAILED ON 64 BIT MACHINE USING DVDISO extracted on 64 bit machine burnt at 1X speed (No Joy) ISO extracted on 32 bit machine burnt at 1X speed (No Joy) Boot priority set as CD/DVD 1 Using ISO MAGIC and burning on Memorex DVD Media at 1X speed See system Specs Failure point is missing CD/DVD driver BD ROM is Lite-On HD 101 Original install is OS 7 RC-1 7100 build Attempting complete install Attempted DVD and Virtual Drive w/Virtual_Clone Narrative:
I attempted to install the latest RTM release. I assumed that this would be easy as RC-1 was a breeze. Installing RC-1 I used the ISO extract to DVD at Slow Speed, did the same procedure here.
In BIOS I made the boot priority the CD/DVD drive as primary.
I inserted my media into the BD drive and saw the prompt: " Touch any Key to boot fromCD". Did that. The Media began to initialise but it was extremely slow, 3-4 minutes. The screen with company mast and working bars took a few minutes. After that the wallpaper came up with a mouse pointer. I was able to move the mouse around and after another few minutes I saw the Logo screen with Language and keyboard US.
The Windows Install Prompt was next and I executed the install. After a few more minutes I see the "SET UP STARTING". After a few more minutes I get a new screen w/"Load Driver".Required driver for CD/DVD is missing.
The installer scanned the media disc but there was no driver to be found.
I uploaded 2 images for everyone to see.
Is any forum member here have a work around?
I attempted to install my drivers from my sys_32 folders from a thumb drive but no joy.
Since RC-7 was such a snap I assumed this install would be as easy also.
I've got a windows 7 machine connected to the internet through a gentoo linux firewall/router/proxy.
I used to have this problem a while ago on windows xp but worked around it with dns hacks on my linux box. This time I want to find the actual cause.
As of today, if I go to IMDB, most of the CSS files fail to load. Trying to get to the url directly, firefox and chrome both tell me that the IMDB cdn server can't be found. Running nslookup from the windows 7 machine managed to resolve the hostname perfectly. It also works flawlessly from the linux box.
I have transparent interception on port 80, going to a squid proxy which should perform all the DNS queries. It seems that browsers (firefox and chrome...untesed with others) still seem to be trying to perform DNS lookups themselves and for some reason, fail for certain addresses.
I'm having problems with my system, I can barely go 10 minutes without having to restart my computer because of DNS failure. I've restarted my router, changed my IPv4 DNS location, etc. And I've had no luck.
VPN configures ok but fails with error 619. Usually a authentication issue so disabled windows firewall and avast with same results. Other than the ip address, user id and password are there any other VPN configuration issues I may have missed? I followed an XP script but the Windows 7 config was very close.
I was on my way to install Freemake video conversion tool and it requires .NET 4.0, which isn't on my Windows 7 Ultimate x64 mule, so it fetched the installer and I ran it. It failed to install throwing a fairly generic code "file not found".I have been doing some searches and the problem/s with such are plenteous. the various methods i've seen have spotty success, and too often end with "why don't you nuke the drive and reinstall 7".
have a 14month old emachine notebook, with win 7 home ed pre installed, and the hdd failed. fitted new hdd but cannot access the os from the old hdd, and have no backup disks. how can i get a copy of the os. have the licence key
i have an hp625 which just stopped whilst playing a dvd disc , then i forced it to shutdown by continuous press on the power button. then i cant switch it on now it keeps the light on the power supply illuminated but no start or anything.
i do a weekly scheduled backup it failed (code 0x81000019)this week. i freed up space try again fail. i check the event viewer and the only error even remotely related to VSS is "The VSS service is shutting down due to idle timeout."i re-tried multiple times (with my security software off and with it on) and checked and the VSS service was on and starting properlyi researched it on the net and ran "vssadmin list writers" (from an elveated command prompt of course)some of them listed time out error i reboot run it again and all have no error then try the backup and the same ones have time out errori'm currently running "sfc /scannow" because the research on the internet said that one of the causes could be corrupted driversmy backup drive is a usb HDD drive f:/ interesting event viewer logs for my backup drive"The shadow copies of volume F: were aborted because of an IO failure on volume F:."on top of this the drive won't recognize unless turned on after the boot is finished or off then on again once the desktop is displayed its the same regardless of what cable i use and check disk shows no errors on the drive(haven'tdone surface scan yet)i will post the results of sfc/scannowsystem informationwindows 7 ultimate 64bit8gb ddr3-1333 ram500gb sata internal hdd c:500gb usb external hdd f:athlon IIx2 3ghzmsi 1GB radeon hd 6670msi 880g-e45 motherboardlg sata internal dvd-rw drivesata controller in ahci mode
making the computer recognise the system drive by using command prompt in recovery options windows 7 dvd. In the recovery options there is no operating system apparently but i know for a fact it is there as i had been on my windows 7 fine until i restarted the comp and then the problems started.
So how can i get windows to recognise where the system partition is.
m using Windows 7 on my Dell Studio PC and have encountered a Server Execution Failure when I try to use Windows Explorer or some other programs. My internet and mail server are working. The system was running smoothly until recently and I have tried chk dsk, scannow, registry optimizer and avast anti virus, to no avail. I have Hijack This but don't have enough experience to know what to look for. I have been reading google search items but still can't locate a fix.
