I'm trying out USB Safely Remove and I see when I try to Stop a USB docking station, it shows me that the Volume Tracking Information service has hold of the drive even though it's not in the list for System Restore Points.
Anyone know how to turn volume tracking on and off? I'm running Windows 7 32 bit build 7077.
I have an older PC (AMD Athlon II x4 630 Processor) running Windows 7 Home Prem - 64 bit. I noticed about a week ago my mouse was acting up (figured it was a bad mouse and didn't think much about it), soon afterwards I started getting that blue screen of death and it would shut down. My current virus protections is AVG, which I ran. I then ran Malewarebytes, Superantispyware and Spybot in both regular and safe mode. They seem to find a few things but nothing that really looked serious. I tried System Restore but got an error statement that it wasn't functioning correctly because of some type of Volume Shadow component problem (which I researched and turned back on to no avail).
Other symptoms are when I try going to control panel or even the microsoft update page they open but are minimized - when I try to open them larger they almost look like they open and go to the far right of my screen out of site. The reason I think it is a virus is that in safe mode the control panels opens right up - but still cant get to microsoft update page. This problem seems to be getting worse the last couple of days. What is weird I really don't notice much else wrong with pc. I can still go online without a problem, home page hasn't changed any and haven't noticed pc slowing down at all.
I wonder if it's possible to disable automatic restore point creation, and ONLY have Windows 7 store on demand system restore points that I choose to manually create at my convenience. If I go to Administrative Tools/Task Scheduler/System Restore I find two schedule triggers. Will disabling those triggers achieve this? Will my restore points be deleted if I do this or just the schedule
View 2 Replies View RelatedI installed windows 7 watermark remover but disable minimize-restore-close for all window and I cant resize windows and Drag them.
tanx
I am looking for a simple cheap, and possibly free way to track the number of pages my employees print. Cost of ink and paper have been going through the roof and my department does not have the budget to invest into heavy duty tracking software.
View 1 Replies View RelatedIs there any way to block tracking cookies?Also I have two tool bars I'd like to delet but am unable to do so,I can disable them but they remain in the manage add ons window.
View 5 Replies View Relatedcan anybody to track my position using sim card
View 2 Replies View RelatedI'm trying to track my daughter and sons laptops that were stolen from our home today while we were gone. The perpetrator came in one of the back windows.
View 4 Replies View Relatedhow do track a stolen laptop with windows 7
View 4 Replies View Relatedhow about tracking the laptop through its licensed if it is not yet been refomat?my laptop were stolen jz last month,and we doubt that our suspect will reformat it because its quite expensive to afford a new license(windows 7 ultimate).
View 1 Replies View RelatedMy laptop was stolen and i was wondering if there is any way if i can track it down. i know the serial number and mac address and stuff i just need to know if there is any way i can track it down.
View 2 Replies View RelatedIs there a way in Windows 7 to track when a computer is turned on and off? A log for the week would be great but I want to see each weekday when the computer is turned on and when it is turned off?
View 14 Replies View RelatedI receive many inquiries through a B2B website. These inquiries are send to me by email. The sender's email address is the server from the B2B website.I want to add these emails to my business contacts in BCM 2010 without linking and tracking the email address.Then I want to link and track the email address that i filled in the email field of the business contact.
View 1 Replies View RelatedIs there any application today that can track stolen laptop through serial numbers?
View 5 Replies View RelatedI have a spanned volume setup with 4 drives. One of the drives is starting to throw read errors which is preventing WHS from backing it up (Yikes!).
Is it possible to clone the drive with the errors and to reinsert a new drive into the array?
Can the new drive be bigger?
For backup purposes, I want to take two 1 TB hard drives, make them dynamic disks, then mirror them using the disk manager in Windows 7. After I do this, of course, it looks like one drive to the OS, not two. So I'm writing my data to them, storing music and movies and whatever on them so now there is an identical copy of the data on both drives. Now what if one drive fails or I just yank one drive out of the machine. When I reboot the computer, will Windows just see the one drive that's still working, and just make the data available on it like nothing ever happened? Perhaps I would simply need to convert the disk back into a "normal disk" with Disk Manager?
View 9 Replies View RelatedMy all partition turned into simple volume. What do I have to do?
View 2 Replies View RelatedWhen I go to the normal shrink partition in my Windows 7, it won't allow me to do it. What do I need to do to get my pc to allow me to shrink the C; in order to allow large Drive partition/
View 4 Replies View Relatedhow one removes SVI from a non-fixed USB disk? I have system restore switched off on this drive..shows zero on scale but the disk has 623mb of SVI information possibly from a previous restore point setting..not sure where it came from Not sure if indexing is on this drive Can I remove this information.
View 1 Replies View RelatedI am running out of space on my SSD and i would like to extend it into an additional drive. Firstly is that possible and secondly how?
View 9 Replies View RelatedI'm trying to sort out issues with my Windows 7 machine and want to disable/set to manual services that I know are not needed, but every time I have done this in the past (a while ago now) I invariably run into an issue where I've inadvertently disabled a service that was needed by something, and I end up scratching my head (as all of my hair falls out around this point) and enabling everything just to sort it..
Is there any utility that anyone is aware of that lets you toggle service status, with the option to reset to default or reset to last status, while showing a list of services that I've changed?
I can't seem to word it properly for a search engine to find relevant results, and find usually specific services and not something I'm hoping exists.
I wish the Services.msc mmc had a checkbox or some sort of flag to show altered services so you could sort them by that, which would help a lot, but it doesn't.
So I am wiping my hard drive by booting with the Windows disk and going to command prompt. I successfully formatted drive C:, about 100 MB of system files and D:, about 500 GB or the bulk of my hard rive. These were the same hard drive, but separate partitions apparently. In Windows it just appears as C: altogether hiding the system files so you don't do something stupid. After I had cleared those two drives, I thought everything was gone until I remembered that it started me out in X:sources. I went back to it and was like what the heck is this? I went to the root directory, X: and typed dir for directory. There was an executable setup file, and four directories including the "sources" one, Program files, Windows, and Users. The whole drive was about 30,000,000 bytes which is I guess 30 MB. It's volume label was called "Boot". I tried to format it, and it said "Cannot format. This volume is write protected." What is this X: drive and is there a command to remove the write protection? Also, what would happen if I did eliminate this data? Could I still install Windows back from the DVD or would that not be possible without those them?
View 1 Replies View RelatedI currently just set up my new build. I decided to go with Western Digital Caviar Green 3TB for my hard drive. However, I split the hard drive into two parts: 2 TB and roughly about 770 GB unallocated space. I installed Window 7 on 2TB partition. Now, I decide to use the rest of 770 GB of unallocated space. I tried to use Computer Management, but it doesn't give me the option to create a new volume from unallocated space. Similar thing happened with EaseUS Partition Master. With Acronis Disk Director, it doesn't even recognize the unallocated space at all!!! So how can I create a new volume or even merge it with my C drive? Do I have to reformat my hard drive and split them again and do a clean installation again?
Note:I already checked, my BIOS recognizes my hard drive with 3 TB. The unallocated space is right after my C drive. There is only 1 primary MBR partition (C drive), and 100 MB system files right before it.
My D drive is full and I tried to erase some files and went to administrator tool to decrease volume and then the whole drive disappear. How to recover the drive.
View 1 Replies View Relatedi am having 2 drivers in my system window 7 o.s. but after installing of another o.s i.e linux mint 12 i lost my main data driver partition. but dat lost driver is present in disk management, but it not able to perform any operation over that , it is having 2 enable operation i.e delete volume and help and i dont't have to delete that volume.
View 1 Replies View Relatedso i have a blue yeti, and i'm an online animator/voice actor. whenever i record audio on my blue yeti (or any other mic) i record about 4-6 inches from the mic, and turn the gain down enough that the audio doesn't peak as i yell or whatever. this is what you're supposed to do if you don't want your audio levels peaking and making your recording sound horrible and corrupted. however, afterwards, it means i have really quite recordings. not a problem right? now that it's recorded right, i can boost the volume of the entire clip afterwards right? wrong. i'm not an audio expert so i must be missing something. but why in gods name would the audio distort and peak after it's recorded successfully? it's all there, it's all clean audio. if i turn the volume on my speakers all the way up it sounds crystal clear! all i want to do is do that inside the computer so that when i upload it to Internet people don't have to turn their speakers so far up. but if i increase the clips volume in the computer, it distorts! it sounds awful! why?! i tried in sony acid and audacity and they both do the same thing! i can take sound effects, and recordings made by other producers and crank them up nice and loud, but mine just fall apart!
View 2 Replies View RelatedPart of my job involves taking images of many different computers using Norton Ghost and saving them to external drives. One of these drives is a Western Digital MyPassport that is soon being re-purposed. When taking one of the images with this drive I accidentally clicked on the System Volume Information folder and, while I caught my error this time, saw that there were 2 other ghost files already saved in that location. I would like to pull these off of this drive and transfer them to one that will still be in use for storing images, but can't gain access to the System Volume Information folder outside of Ghost to do so, and the steps to access the folder on my computer don't seem to work for the drive (show hidden files and folders is selected, hide protected operating system files is unchecked, and system restore is turned off for the drive).
View 4 Replies View RelatedHonestly don't know y I deleted it but, I was cleaning files from my drives while in Linux and I deleted the system volume folder from one of my hdds and now all my data is inaccessible. Haven't touched the drive since, would like a surefire way to get it back. Here is my set up64gb ssd Windows 7 1tb hdd internal (deleted system volume folder) 1tb external hdd 50gb Linux partition 950gb ntfs partition
View 2 Replies View RelatedThe Network Drive volumes do not show up in Windows Explorer using Windows 7. The network drives appear with the assigned drive letter followed by Network Drive, for example, (Q Network Drive I've checked and the volumes are labeled correctly on the servers. Is there a registry entry that needs to be modified in order to correct?The system is a Toshiba R830 laptop running Win 7 64-bit
View 5 Replies View Relatedi had windows 7 OS in drive c . while i was partitioning drive c using disk management, disk 0 which has all recovery image drive c were converted to simple type.
View 5 Replies View RelatedI don't know if its a coincidence, but I left my blu-ray drive open when I turned my PC off, and all hell broke loose. Now I get these Unmounable Boot Volume. So Far,
- I've switched around the boot configuration. I've taken out the cmos battery.
- I've disconnected my 2nd hard drive
- I've reset bios default settings
- I've switched the SATA ports
I don't know what else to do, because I don't want to do a Fresh OS install. Right now I'm just working on 1 hard drive. my second 1tb is disconnected from power and data and I'm having the same problem. I also just disconnected my Blu-ray drive. And I did the start up repair. Niether worked.